1
⁄4 DIN Ramp/Soak
Temperature/Process Controllers
Panel Punches
with Fuzzy Logic
Available, Visit
omega.com/
panelpunches
CN72000 Series
Starts at
$
465
⻬ Dual-Display NEMA 4X
(IP65) Front Panel
Resists Dust and Moisture
⻬ Front Panel
Programmability
⻬ 16 Ramp/Soak
Segments with
Program End Control
⻬ Fuzzy Logic
⻬ Autotune
⻬ Built-In, Isolated 24 Vdc
Power Supply
⻬ Isolated Control Outputs
The CN72000 Series temperature/
process controllers set a new
standard in quality, versatility,
ease-of-use and value. Posessing
many high-level standard features,
additional function setup items also
appear in the control menu when a
function is selected, simplifying the
selection process. Units feature a
universal input for thermocouple
Types J, K, E, T, L, N, B, C, S and
R, RTD’s, a differential input
(-10 to 10 mVdc), and a process
input (0 to 20 mAdc, 0 to 10 Vdc).
A standard 24 V isolated, regulated
power supply is included; operates
most standard 4 to 20 mA
transmitters. Standard features
include autoune, fuzzy logic, fully
adjustable PID, auto/manual control
with smooth transfer and front panel
activation key, percent output
indicator, peak and valley indicator,
loop break protection and indication.
For process inputs, the display is
fully programmable from -1999 to
9999 with selectable decimal point
location. Most thermocouple and
CN72033, $465.
RTD inputs show whole or tenth
degree displays. The CN72000
Series can be programmed for
on/off, PID, heat/cool, or latching
alarm. All outputs are isolated from
the inputs. Outputs include 10 A
relay, and scalable 0 to 20 mAdc.
Specifications
Selectable Inputs: Thermocouple,
RTD, DC voltage or DC current
Input Impedance:
Thermocouple: 3 MΩ minimum
Voltage: 5000
Current: 10
RTD Current: 200 µA maximum
Display: Two 4-digit, 7-segment,
6.35 mm H (0.25") LEDs
Accuracy: ±0.25% of span,
±1 least significant digit
P-69
Supply Voltage: 100 to 240 Vac,
nominal, 10 to 15%, 50 to 400 Hz
Single Phase: 132 to 240 Vdc, nominal,
10 to 20%
Operating Temperature:
-10 to 55°C (14 to 131°F)
Control Output Ratings:
Relay: SPDT, 10 A @ 240 Vac
Resistive:
1
⁄3 hp @ 240 Vac
Alarm Relay: SPST,
3 A @ 240 Vac resistive
Proportional Current (Isolated):
0 to 20 mAdc, scalable into
600 Ω maximum
SSR: 2.5 A @ 240 Vac @ 25°C (77°F);
derates to 1.25 A @ 55°C (130°F)
DC Pulse (Isolated):
15 Vdc @ 20 mA
Weight: 369 g (13 oz)
1
⁄2 hp @ 120 Vac,
Inputs
AL 1 AL 2
° F
° C
REM
%
HOL D MA N
PV
SV
SP1
SP2
95.9
(3.774)
95.9
(3.774)
13.5
(0.530)
100.8
(3.970)
1 14.3
(4.500)
91.3
(3.596)
Maximum Panel Thickness
6.35 (0.250)
Panel
Extended Warranty
Program
SM
Input Types Range
Dimensions: mm (in)
Thermocouple -129 to 1371°C (-200 to 2500°F)
Thermocouple -73 to 871°C (-100 to 1600°F)
Thermocouple -212 to 398°C (-350 to 750°F)
Thermocouple -73 to 982°C (-100 to 1800°F)
Thermocouple -73 to 1300°C (-100 to 2372°F)
Thermocouple -17 to 1760°C (0 to 3200°F)
Thermocouple -17 to 1760°C (0 to 3200°F)
Thermocouple 24 to 1820°C (75 to 3308°F)
(J DIN) Thermocouple -73 to 871°C (-100 to 1600°F)
Thermocouple -17 to 2320°C (0 to 4208°F)
Pt100 RTD (0.00385) -200 to 875°C (-328 to 1607°F)
Pt100 RTD (0.00392) -200 to 875°C (-328 to 1607°F)
RTD, 120 Ω nickel (0.00628) -80 to 320°C (-112 to 608°F)
RTD, Pt1000 (0.00385) -200 to 875°C (-328 to 1607°F)
0 to 20 mA*, 4 to 20 mA* -1999 to 9999
0 to 10Vdc*, -10 to 10 Vdc*,
-10 to 10 mVdc*
Note: All thermocouple and RTD inputs can be set for 0.1° display. If temperature
goes above 999.9° or below -199.9°, the display will return to whole-degree resolution.
Process Input Types: The 0 to 20 mAdc, 4 to 20 mAdc, 0 to 10 Vdc, 2 to 10 Vdc,
*
and -10 to 10 mVdc inputs are fully scalable from a minimum of 100 counts span
placed anywhere within the range of -1999 to 9999. Decimal point position is
adjustable from the zero place (9999), tenths (999.9), hundredths (99.99) or
thousandths (9.999).
-1999 to 9999
Side View
Front View
OMEGACARESMextended warranty
program is available for models shown on
this page. Ask your sales representative
for full details when placing an order.
OMEGACARE
SM
covers parts, labor and
equivalent loaners.
Options
Ordering Add’l
Suffix Price Description
-RSP1 $80 Remote setpoint,
0 to 20 mA
-RSP2 80 Remote setpoint,
0 to 10 Vdc
-PV1 80 Retransmission
output, 0 to 20 mA
-PV2 80 Retransmission
output, 0 to 10 Vdc
-4SP 80 4-stage remote
setpoint
Recommended Reference Book:
Controller Tuning, PID,GE-2117, $25.
Accessory (Field Installable)
Model Number Price Description
CNQUENCHARC $10 Noise suppression RC snubber (2 leads), 110 to 230 Vac
Visit omega.com/bobi
for Additional Books
To Order (Specify Model Number)
Model Number Price Description
CN72130 $479 Single output relay/DC pulse with alarm
CN72150 519 Single output 0 to 20 mA with alarm
CN72033 465 Dual output 2 relay/DC pulse
CN72011 465 Dual output 2 AC SSR/DC pulse
CN72053 519 Dual output 0 to 20 mA and relay/DC pulse
CN72055 550 Dual output two 0 to 20 mA
CN72111 502 Dual output 2 AC SSR/DC pulse with alarm
CN72133 502 Dual output 2 relay/DC pulse with alarm
CN72153 543
CN72155 594 Dual output two 0 to 20 mA with alarm
Comes complete with operator’s manual.
Ordering Examples: CN72130, single output relay/DC pulse with alarm, $479.
OCW-3, OMEGACARE
$479 + 119 = $598.
CN72053, dual output relay/DC pulse, $519.
SM
extends standard 1-year warranty to a total of 4 years ($119),
MOST POPULAR MODELS HIGHLIGHTED!
P
Dual output two 0 to 20 mA relay/DC pulse with alarm
P-70