Omega Products CN616TC1 User Manual
1
⁄4 DIN Economical 6-Zone
PID Temperature Controllers
CN616 Series
U 6-Loop PID Controller
U Autotune or
Manual Tuning
U Heat or Cool Control
U 20-Segment Ramp/Soak
Profile Per Zone
U Password Protected
U User Programmable
U RS232 Digital
Communications
Standard
U Front Panel Calibration
U High, Low or High/Low
Alarm, Latching
or Non-Latching
U Programmable
Thermocouple Types
J, K, T, R, S, E, B, or C
U 1⁄4 DIN Aluminum Case
The CN616 Series is a highly
versatile 6-loop microprocessorbased controller designed for
easy front panel or remote setup
and operation. Each of 6 zones is
sequentially scanned, and active
zones are displayed. Individual
zones can be locked for monitoring.
Each instrument is programmable
to meet operator needs for:
thermocouple type, temperature
units; high, low or high/low alarm
configured as latching or
non-latching; and autotune with
manual trim or manual PID setting.
The zone display scan time and
ramp/soak can be set by the
operator. Parameters and setpoints
are retained when power is turned
off. Password protection is provided
to prevent accidental changes to
calibration, PID setting and ramp/
CN616TC1 shown actual size.
soak profile. If power loss occurs,
the controller retains all the latest
parameters and returns to “RUN” mode.
All CN616 controllers have RS232
3-wire serial communications.
The RS232 program is capable of
monitoring up to 10 daisychained units.
Line voltage is 120 Vac or 240 Vac
selectable by external jumper
assembly. Connections are made to
the back of the instrument through
easy-to-use screw terminal plugs.
The CN616 Series implements a
security password to protect settings.
The password can be enabled or
disabled on the front panel and
changed via RS232. Calibration is
performed via the
front panel and is separately
password protected. Higher level
passwords are available.
The instrument is housed in a
1
⁄4 DIN
aluminum box which does not have
to be removed for mounting. The
unit mounts in a 1⁄4 DIN panel cutout
and is secured by slide brackets.
The device is controlled via 6 DC
pulse outputs (1 for each zone).
A single output relay is provided to
indicate an alarm condition on any
zone. The instrument shows an
alarm condition by flashing the main
temperature display while indicating
the zone in alarm with a flashing
zone number display. When set to
non-latching, the alarm automatically
resets when the condition changes.
The alarm must be manually reset in
the latching setting.
The controller functions in 2
modes— “RUN”, the basic operating
mode, and “FUNCTION SELECT”,
the password protected settings
selection and control mode.
Panel punches
available, visit
omega.com/
panelpunches
P-83
Specifications
Number of Loops: 6
Accuracy: ±0.1% of max range
Resolution: ±1°C or °F
Temperature Units: °C or °F
Thermocouple Input:
Selectable J, K, E, T, S, R, B or C
PID: Autotune or manual
Password Protection: Calibration and
PID changes
Profiling: Ramp/soak,
20 segments/loop
Loop Configuration: Heat or cool
Control Output: 6 DC pulse outputs
(1 per zone); designed to drive
3 to 32 Vdc input solid-state relays
Control Output Voltage:
5 Vdc at 10 mA per loop
Alarms Rating: 5 A @ 120 Vac
Alarms Selectable: High, low, or high/
low; latching or non-latching single relay
for 6 loops
Zone in Alarm: Flashing
Latch Reset: Manual
RS232 Communications: Single-drop
daisy-chain up to 10 controllers
Baud Rate: 4800
Data Bits: 8
Parity: N
Stop: 1
Protocols:
ASCII line computer interface
Communication Software: Windows
compatible, written in Visual Basic
Terminals: Headers for plug-in wiring
Enclosure:
152 mm (6") L
Power Loss: Controller retains
the last setting
Display: 14 mm (0.56") LED, 4-digit
Front Bezel: 99 mm
1
⁄4 DIN
CN616
1
⁄4 DIN aluminum,
2
(3.90 in2)
Dimensions:
mm (inch)
Temperature/
Setpoint Display
Zone
Setting
Set/Shift/
Reset Button
SM
Extended Warranty
Program
OMEGACARE
warranty program is available for
models shown on this page. Ask
your sales representative for full
details when placing an order.
OMEGACARE
labor and equivalent loaners.
SM
extended
SM
covers parts,
152
(6.0)
92 (3.62)
Advance
Digit Button
Software Configuration Screen
Load
Button
Temperature
Scale Selection
92 (3.62)
Function
Setting
Input Types and Ranges
Standard Range Extended Range
Thermocouple Input Type CN616 (TC1) CN616 (TC2)
Pt/30% Rh-Pt/6% Rh
32 to 3300°F
W/5% Re-W/26% Re
32 to 4200°F
CHROMEGA®–Constantan
32 to 1000°F 32 to 1652°F
Iron–Constantan
32 to 1300°F
CHROMEGA®–ALOMEGA
32 to 1800°F 32 to 2282°F
Pt/13% Rh-Pt
32 to 3200°F
Pt/10% Rh-Pt
32 to 3200°F
Copper–Constantan
32 to 750°F
0 to 1750°C
0 to 1750°C
0 to 1800°C
0 to 2300°C
0 to 550°C 0 to 900°C
0 to 700°C
®
0 to 1000°C 0 to 1800°C
0 to 400°C
—
—
—
—
—
—
P
1
⁄4 DIN
CN606 Series
companion scanner, also available.
Visit omega.com/cn606_612 for details.
To Order Visit omega.com/cn616 for Pricing and Details
Model No. Description
CN616TC1 6-zone thermocouple input controller
CN616TC2
CNQUENCHARC
Comes complete with software and operator’s manual.
Ordering Example: CN616TC1, 6-loop temperature controller with 20-segment ramp and
soak on each loop and RS232 communications.
OCW-3, OMEGACARESM extends standard 2-year warranty to a total of 5 years.
6-zone thermocouple input controller with extended range
Noise suppression RC snubber (2 leads), 110 to 230 Vac
P-84
Loading...