OLYMPUS C-4040 Zoom TECHNICAL INFORMATION TID C4040Z E003

TECHNICAL INFORMATION

Product name: C-4040ZOOM

The latest firmware:

NTSC(GUI:JAPANESE)

(OLD FILTER)

NTSC(GUI:ENGLISH)

(OLD FILTER)

PAL

(OLD FILTER)

NTSC(GUI:JAPANESE)

(NEW FILTER)

NTSC(GUI:ENGLISH)

(NEW FILTER)

PAL

(NEW FILTER)

SUBJECT: Version up of Firmware

OLD VERSION NEW VERSION SERIAL NUMBER

v552-79 v552-80

v552u-79 v552u-80

v552p-79 v552p-80

OLD VERSION NEW VERSION SERIAL NUMBER

v552-A79 v552-A80

v552u-A79 v552u-A80

v552p-A79 v552p-A80

NO. TID-C4040Z-E003

DATE January .22.2002

h

h

h

h

h

h

Please refer to repair article for a procedure of rewriting firmware.

h These serial numbers are under inquiry.

Change contents (Reason):
It's the improvement for the hang-up when the allow pads are pressed at the same time in the Rec.-Mode.

Version up procedure:

1. The binary data of the latest firmware is changed with “firmware.bin” and into smart media.
But format smart media into C-4040Zoom and make directory “firmware” copy from binary data.
(Make F/W card)

2. Insert the F/W card for C-4040Zoom and turn on the camera at play mode.

3. TFT-LCD was showed F/W version and inquire of rewriting of F/W.
Then select “YES” (Character is changed green) and after pressing “OK”, rewriting of F/W is started
automatically.

4. During the rewriting of F/W, SELF-RED is turned on and showed “EXCHANING” on TFT-LCD.
It will take about 2 minutes but please do not operate any key and turn off power.
It might have damaged camera body and F/W.

5. After the rewriting of F/W, TFT-LCD was showed as same as procedure 3.
Then confirm new version of F/W (example: v552-80=NTSC (GUI:JAPANESE)(OLD FILTER)) and turn off
power after selecting “NO”.
(The discrimination of countermeasure is not showed due to confirm easily.)

OLYMPUS OPTICAL CO. ,LTD TOKYO