Page 1
B. DISASSEMBLY AND ASSEMBLY PROCEDURE
X-100/D-540ZOOM/C-310ZOOM
B. DISASSEMBLY AND ASSEMBLY
PROCEDURE
[1] REMOVAL OF CABINET BACK, TB1 BOARD AND CABINET FRONT ............... B-2
[2] REMOVAL OF LCD AND ST1 BOARD................................................................... B-3
[3] REMOVAL OF CP1 AND LENS ASSEMBLY.......................................................... B-4
[4] BOARD LOCATION ................................................................................................ B-5
B-1 Ver.1
Page 2
B. DISASSEMBLY AND ASSEMBLY PROCEDURE X-100/D-540 ZOOM/C-310 ZOOM
[1] REMOVAL OF CABINET BACK, TB1 BOARD AND CABINET FRONT
Disassembly perform as follows and assembly perform by reversing the disassembly steps.
Be sure to discharge the main capacitor, then continue to disassembling.
! Beware of electric shock !
Danger of electric shock.
Use a discharging tool to remove
the electrical charge before working.
1. Open the cover USB.
2. Open the cover card
3. Six screws 1.7 x 4
4. FPC
5. Cabinet back
6. Three screws 1.7 x 3
7. Shield tape F
8. Shield tape B
9. TB1 board
10. Earth mode
The lead free solder is applied to this product.
!
11. Button mode
12. Open the cover battery.
13. Three screws 1.7 x 3.5
14. Shaft strap
15. Cover jack
16. Cabinet front
17. Stand
18. Discharge
Use the lead free solder in working.
Notice
1
2
3
14
16
18.Discharge
12
7
9
13
11
4
7
10
8
3
5
6
14
17
3
15
B-2 Ver. 1
Page 3
B. DISASSEMBLY AND ASSEMBLY PROCEDUREX-100/D-540 ZOOM/C-310 ZOOM
9
1
[2] REMOVAL OF LCD AND ST1 BOARD
8
12
10
1. Screw 1.7 x 3.5
2. Screw 1.7 x 4
3. FPC
4. Connector
5. Spacer LCD light
6. LCD
7. Holder monitor
8. Spacer A
9. Spacer strobo B
10. Spacer strobe C
11. FPC
12. Three screws 1.7 x 4
13. Spacer flash lead
14. Screw 1.7 x 4
15. ST1 board
16. Assy flash
17. Remove the solder.
15
16
3
17
2
3
11
4
14
ST
CP
6
1
7
5
B-3 Ver. 1
Page 4
B. DISASSEMBLY AND ASSEMBLY PROCEDURE X-100/D-540 ZOOM/C-310 ZOOM
[3] REMOVAL OF CP1 AND LENS UNIT
1. Two screws 1.7 x 4
2. FPC
3. Remove the solder.
4. Three screws 1.6 x 3.5
5. CP1 board
6. Three screws 1.7 x 4
7. Lens unit
8. Holder chassis
1
6
4
3
5
2
7
8
B-4 Ver. 1
Page 5
[4] BOARD LOCATION
rd
B. DISASSEMBLY AND ASSEMBLY PROCEDUREX-100/D-540 ZOOM/C-310 ZOOM
ST1 board
TB1 board
CP1 boa
B-5 Ver. 1
Loading...