OLYMPUS C-310 Zoom ADJUSTMENT METHOD
C. ADJUSTMENT METHOD X-100/D-540ZOOM/C-310ZOOM
C. ADJUSTMENT METHOD
[1] TABLE FOR SERVICING TOOLS .......................................................................... C-2
[2] EQUIPMENT ........................................................................................................... C-2
[3] ADJUSTMENT ITEMS AND ORDER ...................................................................... C-2
[4] SETUP .................................................................................................................... C-2
[5] CONNECTING THE CAMERA TO THE COMPUTER ............................................ C-3
[6] USB STORAGE INFORMATION REGISTRATION ................................................. C-4
[7] ADJUST SPECIFICATIONS.................................................................................... C-4
1. LENS ADJUSTMENT ........................................................................................ C-4
2. AWB ADJUSTMENT .......................................................................................... C-5
3. CCD WHITE POINT DEFECT DETECT ADJUSTMENT ................................... C-5
4. CCD BLACK POINT AND WHITE POINT DEFECT DETECT ADJUSTMENT
IN LIGHTED ........................................................................................................C-5
5. LCD PANEL ADJUSTMENT............................................................................... C-6
5-1. LCD VcomPP ADJUSTMENT .................................................................... C-6
5-2. LCD VcomDC ADJUSTMENT ....................................................................C-6
6. Setting Destination........................................................................................................C-6
[8] ADJUSTMENT ITEMS ............................................................................................C-7
CHECKING OF LENS UNIT.......................................................................................................C-8
SIEMENS STAR CHART............................................................................................................C-10
C-1 Ver.1
C. ADJUSTMENT METHOD X-100/D-540 ZOOM/C-310 ZOOM
[1] Table for Servicing Tools
Ref. No.
J-1
J-2
J-3
J-4
J-5
Note: J-1 Pattern box (color viewer) is 100 ± 10 VAC only.
Pattern box (color viewer)
Siemens star chart
Calibration software
Chroma meter
Spare lamp
Name Part code
Number
1
1
1
1
1
KC0336
KC0337
KC0339
J-1 J-2
J-3
J-4
[3] Adjustment Items and Order
1. Lens Adjustment
2. AWB Adjustment
3. CCD White Point Defect Detect Adjustment
4. CCD Black Point and White Point Defect Detect Adjustment in Lighted
5. LCD Panel Adjustment
5-1. LCD VcomPP Adjustment
5-2. LCD VcomDC Adjustment
6. Setting Destination
Note:
1. If the lens, CCD, board and changing the part in item 2-
4 replace, it is necessary to adjust again. Item 3 should
be carried out after item 2. Item 4 and 5 should be carried out after item 3.
[4] Setup
1. System requirements
Windows 98 or Me or 2000 or XP
IBM ®-compatible PC with pentium processor
CD-ROM drive
3.5-inch high-density diskette drive
USB port
40 MB RAM
Hard disk drive with at least 15 MB available
VGA or SVGA monitor with at least 256-color display
J-5
[2] Equipment
1. Oscilloscope
2. Digital voltmeter
3. AC adaptor
4. PC (IBM ®-compatible PC, Pentium processor, Windows
98 or Me or 2000 or XP)
2. Installing calibration software
1. Insert the calibration software installation diskette into
your diskette drive.
2. Open Explorer.
3. Copy the DscCalDI_131 folder on the floppy disk in the
FD drive to a folder on the hard disk.
3. Installing USB driver
Install the USB driver with camera or connection kit for PC.
4. Pattern box (color viewer)
Turn on the switch and wait for 30 minutes for aging to take
place before using Color Pure. It is used after adjusting the
chroma meter (KC0337) adjust color temperature to 3100
± 20 K and luminosity to 900 ± 20 cd/m
dling the lamp and its circumference are high temperature
during use and after power off for a while.
2
. Be careful of han-
C-2 Ver. 1
C. ADJUSTMENT METHODX-100/D-540 ZOOM/C-310 ZOOM
[5] Connecting the camera to the computer
1. Line up the arrow on the cable connector with the notch on the camera's USB port. Insert the connector.
2. Locate a USB port on your computer.
To USB port
USB cable
AC adaptor
C-3 Ver. 1
Loading...