OLYMPUS C-3020 Zoom Notice of Modification V1R4

C-3100ZOOM / C-3020ZOOM

E. NOTICE OF MODIFICATION

1. Firmware version up for the countermeasure of the date order problem.........E-2

2.

3. Correction of parts number.........................................................................E-4

Firmware version up for the countermeasure of “SDK”................................E-3

E-1 Ver.1/Rev.4

E. NOTICE OF MODIFICATION C-3100ZOOM / C-3020ZOOM

SUBJECT

Firmware version up for the countermeasure of
the date order problem.

DESCRIPTION: Change of Firmware for C-3100 Zoom / C-3020 Zoom.

Destination OLD VERSION NEW VERSION

ALL v374-73 v374-74

Reason:

Even if a power supply is turned off, it is fixed on the order which date order was set up to.
* Date order must be set at your countries one when it exchange Compl PWB CP-1.

Serial number information

Destination Old version (v374-73)

the object machine type

217100153 ~ 217105000

USA

EUROPE 218300001 ~ 218307112

JAPAN None

OTHERS

217110001 ~ 217111970
217300001 ~ 217304992
217310001 ~ 217312112

220100001 ~ 220100576 220100577 ~ 220103776

New version (v374-74)

the object machine type
217105001 ~ 217110000
217111971 ~ 217114000
217304993 ~ 217310000
217312113 ~ 217314000
218100001 ~ 218105000
218307113 ~ 218317000
219100001 ~ 219105000

219300001 ~ 219314000

2002.03.29

REMARKS:

Change classification: Running change.

Version up procedure:

1. Rename the binary data of the latest firmware with “firmware.bin”.
Create a folder “Firmware” in the smart media which was formatted on C-3100 Zoom, and save the binary data
“firmware.bin” into the folder “Firmware”.

2. Insert the F/W card for C-3100 Zoom and turn the camera on at play mode.

3. TFT-LCD shows F/W version and inquiry of F/W rewriting.
Then select “YES” (Character is changed green) and after pressing “OK”, rewriting of F/W is started
automatically.

4. During the rewriting of F/W, SELF-RED is turned on and showed “EXCHANING” on TFT-LCD.
It will take about 2 minutes but please do not operate any key, and do not turn off power.
It might have damaged camera body and F/W.

5. After the rewriting of F/W, TFT-LCD was showed as same as procedure 3.
Then confirm new version “No.” of F/W (v374-74) and turn off power after selecting “NO”.
(The discrimination of countermeasure is not showed due to confirm easily.)

E-2 Ver.1