Oliver 1308-C Installation Manual

Grand Rapids, Michigan, U.S.A. 49504-5298

USER’S OPERATING AND INSTRUCTION MANUAL

MODEL 1308-C & 1308-N

HEAT SEALER

1308S20000CV1

INDEX

Section Description

Document No. Page No.

DESCRIPTION/SPECIFICATIONS ----------------------------1308S20013 ------------------------- 1-1
Description ------------------------------------------------------------------------------------------------- 1-1
Specifications----------------------------------------------------------------------------------------------- 1-1

GENERAL SAFETY INSTRUCTIONS-------------------------1308S20014-------------------------- 2-1
Lockout-Tag out-------------------------------------------------------------------------------------------- 2-1

NAMEPLATE/PICTOGRAMS PART LIST--------------------1308S20015-------------------------- 3-1
Nameplate/Pictogram Locations by Item Number------------------------------------------------ 3-2

SETUP AND OPERATION GUIDE-----------------------------1308S20036-------------------------- 4-1

Set up continued------------------------------------------------------------------------------------------- 4-2

OPERATING PROCEDURES-----------------------------------1308S20017--------------------------- 5-1
Adjustment and Quality ---------------------------------------------------------------------------------- 5-2

TECHNICAL SPECIFICATIONS------------------------------- 1308S20018--------------------------- 6-1
CLEANING PROCEDURES-------------------------------------1308S20019---------------------------- 7-1

Cleaning Procedures-------------------------------------------------------------------------------------- 7-2
Cleaning Cutter Blade------------------------------------------------------------------------------------ 7-2
Replacing and Checking Gaskets---------------------------------------------------------------------- 7-3
Disposal Procedure---------------------------------------------------------------------------------------- 7-3

TROUBLE SHOOTING---------------------------------------------1308S20020---------------------------8-1
WIRING DIAGRAM--------------------------------------------------1308S20021---------------------------9-1
1308-C HEAT SEALER---------------------------------------------1308S20022--------------------------10-1

1308 Heat Sealer Parts Lists----------------------------------------------------------------------------10-2
1308 Heat Sealer Parts Lists Con’t--------------------------------------------------------------------10-3
1308 Tray Carrier-------------------------------------------------------------------------------------------10-4
1308 Tray Carrier Parts List------- ----------------------------------------------------------------------10-4

WARRANTY ---------------------------------------------------- --- GEN 050816
WARRANTY PROCEDURE------------------------------------ GEN 050817
RETURNED PARTS POLICY --------------------------------- GEN 050818

REV. 1/26/09

1308S20012 0-1

THIS PAGE WAS INTENTIONALLY

LEFT BLANK.

GEN020319

DESCRIPTION/SPECIFICATIONS

Description
The Oliver Model 1308 Heat Sealer is designed and manufactured to ensure a user

friendly operation of producing film lidded trays with a cost effective approach.
The manually operated machine operates with either a 120 or 230 V.A.C. outlet. The

machine was designed to be compact to limit the amount of table space needed to
operate.

Specifications

Space Requirements, (Shown with standard options)
Model 1308-C & 1308-N (All dimensions are shown approximate)

Shipping Weight – 65 lbs (30 Kg) (approximate)
Net Weight – 60 lbs (27 Kg) (approximate)

1308S20013 1-1

THIS PAGE WAS INTENTIONALLY

LEFT BLANK.

GEN020319

GENERAL SAFETY INSTRUCTIONS

WARNING

IT IS ESSENTIAL THAT ALL OPERATORS AND MAINTENANCE PERSONNEL

OBSERVE THE FOLLOWING SAFETY PRECAUTIONS. IMPROPER

INSTALLATION, MAINTENANCE, OR OPERATION OF THIS EQUIPMENT

MAY CAUSE SERIOUS INJURY.

1. Read this manual before attempting to operate your heat sealer. Never allow an
untrained person to operate or service this unit.

2. Observe all caution and warning labels affixed to the machine.

3. Always unplug the machine before cleaning or servicing.

4. Do not submerge in water. Do not hose down.

5. Use original replacement parts.

6. Wear proper, personal, protective, safety equipment if necessary.

7. Keep hands away from moving parts of the machine while it is operating.

8. In addition to these general safety instructions, please follow the more specific safety
instructions provided throughout the rest of this operating and instruction manual.

WARNING

DO NOT USE FOR OTHER THAN ORIGINALLY INTENDED PURPOSE.

LOCKOUT-TAGOUT

It is very important that the unit should be free of any unexpected energization, or be
able to release hazardous energy during service or maintenance activities. Therefore,
always switch the machine off before unplugging the power cord from BOTH
and the wall.

1308S20014 2-1

the unit

NAMEPLATE/PICTOGRAM PARTS LIST
(INTERNATIONAL MODELS ONLY)

ITEM NO PART DESCRIPTION PART NUMBER

Spurkt 3

BAKERY

35804 AR Venray,

PRODUCTS BV

MODEL NO. SERIAL NO.

VOLTAGE CYCLE PHASE AMPS

601

KW MFG’D MASS

The Netherlands

“OLIVER” 6401-5076

603

“STAY CLEAR” 6401-9043

604

“CONSULT OPERATORS…..” 6400-3039

605

“ELECTRICAL SHOCK” 6400-5009

606

“UNPLUG BEFORE OPENING” 6402-1028

607

“HOT SURFACE” 6400-8021

**SEE SHEET 3-2 FOR NAMEPLATE LOCATIONS BY ITEM NUMBER

1308S20015 3-1

NAMEPLATE/PICTOGRAM LOCATIONS BY ITEM NUMBER

1308S20015 3-2

a table or cart

 Place the 1308 Unit on

 Step Two  Step Three

 Open carton as shown

 Remove the 1308 Unit  Shipping carton

material

 Remove parts and packing

1308 SETUP & OPERATION GUIDE

 Install Counterweight

 Step One

the electrical cord

 Snip the plastic ties on

1308S20034 3 - 1