E2D0037-27-41
¡ Semiconductor
¡ Semiconductor
•
Previous version: May. 1997
This version: Jan. 1998
MSM6685
MSM6685
8,388,608-Word x 1-Bit Serial Register
GENERAL DESCRIPTION
The MSM6685 is a serial register composed of 8,388,608 words x one bit, characterized by mediumspeed, low power consumption operation.
This device has a built-in internal address generation circuit allowing continuous serial read/write
operation by external clock input. Read/write operation causes the internal address to be incremented
automatically by +1.
External address input enables addressing in units of 1024 words. Furthermore, a refresh timer and
a refresh address counter are installed, which makes an external refresh circuit unnecessary. In
addition, this configuration allows lower power consumption.
The device is packaged in 26-pin SOJ having a width of 300 mil.
It is well adapted for storing much data by means of a battery backup. Its combination with OKI's
recording and playback IC enables the easy implementation of a solid recording and playback
system.
FEATURES
• Configuration : 8,388,608 ¥ 1 bit
• Serial access operation
Serial access time : 1.5 ms
Serial read/write time : 2.5 ms
• Low current drain : 200 mA max. (VCC = 4 V, at refresh operation, with
data stored and under standard conditions)
• Refresh operation
A self-refresh function is supported.
• Wide range of operating voltage : Single 3.5 to 5.5 V supply
• Addressing : In units of 1024 words
• Process : 0.5 mm double well CMOS process
• Package:
26/20-pin plastic SOJ (SOJ26/20-P-300-1.27) (Product name : MSM6685JS)
1/9
¡ Semiconductor
PIN CONFIGURATION (TOP VIEW)
MSM6685
TEST
RWCK
NC
TEST
TEST
TEST
TEST
DIN
NC
V
SS
1
2
3
4
5
9
10
11
12
13
NC : No connection
26
25
24
23
22
18
17
16
15
14
V
CC
TEST
TEST
SAD
SAS
TAS
CS
WE
DOUT
NC
PIN DESCRIPTION
Pin
25
1, 4, 5
9, 10, 24
Symbol
TEST
TEST
RWCK
DIN
V
SS
DOUT
WE
CS
TAS
SAS
SAD
V
CC
26/20-Pin Plastic SOJ
Description
Test input
Test input
Read/write clock2
Data input11
Ground (0 V)13
Data output15
Write enable16
Chip select17
Transfer address strobe18
Serial address strobe22
Serial address data23
Power supply (5 V)26
Note : All TEST pins are to be connected to the power supply.
The TEST pin is to be referenced to the ground level.
3/9