BARRIER-FREE VERSACOOLER® II
Energy and Water Conservation Technology
PG8SBF (PG8AC VersaFiller® Combination)
Suggested Specification
PG8SBF shall deliver 8.0 gph of 50° F degree water at 90° F ambient and 80° F inlet water. Model P8SBF shall include P8AC and the VersaFiller Sports Bottle Filler with independent manual activation; lower unit must have front and side push pads to activate the manual flow of water for the cooler. VersaFiller alcove and activation button contain Freshield, WHICH UTILIZES a silver-based antimicrobial compound that reduces the growth of micro-organisms and mildew to protect the surfaces from discoloration, odors and degradation. Basin shall be designed to eliminate splashing and standing water. Water Saver Bubbler shall reduce waste water by 50%. Bubbler shall be a Low Flow, one piece construction with flexible guard and operate between 20 and 120 PSI. VersaFiller cabinet finish is Brushed Stainless Steel. P8AC cabinet finish shall be Sandstone Powder Coated paint on galvanized steel or brushed stainless steel. Cooling system shall use R-134a refrigerant.
Water Cooler delivers 8.0 gallons of chilled drinking water per hour. These models satisfy CABO/ANSI A117.1 and these water coolers comply with ADA requirements when properly installed. Units also meet guidelines for children’s accessibility providing the floor to orifice height is 30 inches and proper clear floor space is provided for frontal approach.
Standard Features
>Built-in 100 micron strainer stops particles before they enter the waterway
>Waterways are Lead-Free in Materials & Construction
>Flexible, one-piece Water Saver Bubbler guard
>Heavy Duty Galvanized Steel Frame
>High Efficiency Cooling Tank and Coil
>Refrigerant R-134a
>Four Push Pad Manual Activation on lower water cooler
>External Stream Height Adjustment on Lower Unit
>Independent Mechanical Activation VersaFiller
Finishes
>VersaFiller Cabinet Finish is Brushed Stainless Steel
>Standard Versacooler (bottom unit) Cabinet Finish: Sandstone Powder Coated Paint on Galvanized Steel
>Optional finishes (at additional cost): Brushed Stainless Steel
VersaFiller alcove is tall enough to accommodate most sizes of refillable water bottles on the market.
Options
(at additional cost)
□One-Piece chrome plated brass bubbler (036700-001)
□Oasis Green Filtration System
Energy &
Water
Conservation
Model
Powder Coated Finish Warranty (Continental limits of the United States and Canada): Three years on the powder coat finish provided that the water cooler has not been subjected to abuse, misuse, or alteration.
Limited 5-Year Warranty (Continental limits of the United States and Canada): Five years on the sealed refrigeration system and most component parts. Detailed warranty certificate enclosed with each water cooler; sample available upon request.
Export Warranty: One year on component parts. Detailed warranty certificate enclosed with each drinking fountain; sample copy available upon request.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S.and Canadian standards.
ADA Compliant when properly installed.
Components in this fountain are lead free as defined by the Safe Drinking Water Act Amendments of 1986, and the Lead Contamination Control Act of 1988.
Installation |
other Oasis V |
> Prior to roughing consult with local, state and federal codes |
|
for proper mounting height
>Shipped with complete instructions and mounting brackets
>Removable side and front panels provide easy access for installation
|
|
|
50° F Drinking Water |
|
|
115 Volts, 60 HZ |
|
|
|
|
||
|
|
90° F Ambient Air Temp* |
|
|
|
|
|
|
|
|
||
Model |
Rated Capacity |
|
Base Rate |
Pre-Cooler |
Hot ’N Cold™ |
Compr. |
Full Load |
|
Rated |
Glass Filler |
Cabinet |
Net Wt. |
GPH |
|
GPH |
|
Model |
HP |
Amps |
|
Watts |
Acc. Option |
Color Finish |
Approx. |
|
|
|
|
|
|||||||||
PG8SBF |
8.0 |
|
8.0 |
No |
No |
1/4 |
4.6 |
|
460 |
No |
Yes |
59 Lbs. |
|
|
|
|
|
|
|
|
|
|
|
|
|
* Industry Standard Rating Condition 80° F inlet water temperature. |
Specifications subject to change without notice |
Loading...