NordicTrack NTEL815070 Owner's Manual

www.nordictrack.com

Model No. NTEL81507.0
Serial No.

Write the serial number in the
space above for reference.

Serial Number Decal

QUESTIONS?

As a manufacturer, we are commit­ted to providing complete customer
satisfaction. If you have questions,
or if parts are damaged or missing,

DO NOT CONTACT THE STORE;
please contact Customer Care.

IMPORTANT: You must note the
product model number and ser­ial number (see the drawing
above) before contacting us:

USERʼS MANUAL

CALL TOLL-FREE:

1-888-825-2588

Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT

ON THE WEB:
www.nordictrackservice.com

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Keep this manual
for future reference.

TABLE OF CONTENTS

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

MPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

I

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

HOW TO USE THE ELLIPTICAL EXERCISER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

WARNING DECAL PLACEMENT

This drawing shows the location(s) of the
warning decal(s). If a decal is missing

or illegible, see the front cover of this
manual and request a free replace­ment decal. Apply the decal in the
location shown. Note: The decal(s) may

not be shown at actual size.

NordicTrack is a registered trademark of ICON IP, Inc.

2

IMPORTANT PRECAUTIONS

WARNING:

instructions in this manual and all warnings on your elliptical exerciser before using your elliptical
exerciser. ICON assumes no responsibility for personal injury or property damage sustained by or

hrough the use of this product.

t

1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or per­sons with pre-existing health problems.

2. It is the responsibility of the owner to
ensure that all users of the elliptical exer­ciser are adequately informed of all precau­tions.

3. Keep the elliptical exerciser indoors, away
from moisture and dust. Do not place the
elliptical exerciser in a garage or covered
patio or near water.

4. Place the elliptical exerciser on a level sur­face. To protect the floor or carpet from
damage, place a mat beneath the elliptical
exerciser. Make sure that there is at least 3
ft. (1 m) of clearance in the front and rear of
your elliptical exerciser and 2 ft. (0.6 m) on
each side.

To reduce the risk of serious injury, read all important precautions and

8. Wear appropriate exercise clothes when
exercising; do not wear loose clothes that
could become caught on your elliptical exer­ciser. Always wear athletic shoes for foot
protection.

9. Hold the handgrip pulse sensor or the han­dlebars when mounting, dismounting, or
using your elliptical exerciser.

10. Keep your back straight while using your
elliptical exerciser; do not arch your back.

11. The pulse sensor is not a medical device.
Various factors, including the userʼs move­ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.

12. When you stop exercising, allow the pedals
to slowly come to a stop.

5. Inspect and properly tighten all parts regu­larly. Replace any worn parts immediately.

6. Keep children under age 12 and pets away
from your elliptical exerciser at all times.

7. Your elliptical exerciser should not be used
by persons weighing more than 350 lbs.
(159 kg).

13. If you feel pain or dizziness while exercis­ing, stop immediately and cool down.

14. Use your elliptical exerciser only as
described in this manual.

3

BEFORE YOU BEGIN

Thank you for selecting the revolutionary NordicTrack

LUB XI elliptical exerciser. The CLUB XI elliptical

C
exerciser provides an impressive selection of features
designed to make your workouts at home more effec­tive and enjoyable.

®

cover of this manual. To help us assist you, note the

roduct model number and serial number before con-

p
tacting us. The model number and the location of the
serial number decal are shown on the front cover of
this manual.

For your benefit, read this manual carefully before
you use the elliptical exerciser. If you have ques-

tions after reading this manual, please see the front

Console

Handgrip

Water Bottle Holder*

Pedal

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

Handlebar

Pedal Disc

Handle

Wheel

Leveling Foot

*Water bottle is not included

4

ASSEMBLY

M6 x 20mm

Screw (68)–4

M6 x 13mm

Screw (84)–2

M8 Nylon

Locknut (54)–2

5mm Bushing

(56)–8

M8 x 20mm

Screw (60)–8

M8 x 32mm

Screw (63)–2

M8 x 25mm Bolt

(65)–4

M8 x 60mm

Screw (88)–2

M4 x 15mm

Screw (52)–6

ssembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the

A

packing materials. Do not dispose of the packing materials until assembly is completed.

In addition to the included tool(s), assembly requires a Phillips screwdriver , an adjustable

rench , and a rubber mallet .

w

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parenthe­ses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The
number following the parentheses is the quantity needed for assembly. Note: Some small parts may have

been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled.

5

1.

To make assembly easier, read the

nformation on page 5 before you begin.

i

1

2

Orient the Shield Cover (39) and the Upright (2)

s shown. Slide the Shield Cover upward onto

a
the Upright.

While a second person holds the Upright (2)
near the Frame (1), insert the wire harness
upward through the Upright. Tip: Use an elas-

tic band or a piece of tape to prevent the top
of the wire harness from falling down into
the Upright.

Tip: Avoid pinching the wire harness during
this step. Attach the Upright (2) to the Frame
(1) with four M8 x 20mm Screws (60). Tip:
Start all the Screws before tightening any of
them.

Then, slide the Shield Cover (39) downward to
the bottom of the Upright (2).

Attach the Cup Holder (19) to the Upright (2)
with two M4 x 15mm Screws (52).

19

52

60

Avoid pinching the

wire harness

60

Wire

Harness

39

1

2. Attach the Right Handlebar Leg (32) to the
Right Pedal Leg (28) with an M8 x 32mm Screw
(63), four 5mm Bushings (56), and an M8
Locknut (54). Do not overtighten the Locknut;

the Right Pedal Leg must pivot easily.

Attach the Left Handlebar Leg (not shown)
to the Left Pedal Leg (not shown) in the
same way.

2

32

56

54

28

56

63

6

3. Identify the Right Frame Cover (8), which is
marked with the word “Right,” and orient it as
shown.

Attach the Right Frame Cover (8) to the Frame

1) with two M6 x 20mm Screws (68) and an

(
M6 x 13mm Screw (84).

Attach the Left Frame Cover (not shown) to
the Frame (1) in the same way.

3

84

68

68

1

8

4. While a second person holds the Console (6)
near the Upright (2), connect the console wire
harness to the wire harness. Insert the excess
wire downward into the Upright.

Attach the Console (6) to the Upright (2) with
four M8 x 20mm Screws (60). Tip: Avoid

pinching the wires.

4

6

Console Wire

Harness

2

Wire

Harness

Avoid pinching

the wires

60

7

5. Identify the Right Handlebar (35), which is
marked with an “R” sticker. Apply a generous
amount of the included fastener adhesive to two

8 x 25mm Bolts (65). Then, attach the Right

M
Handlebar to the Right Handlebar Leg (32) with

he two Bolts.

t

Attach the Left Handlebar (not shown) to the
Left Handlebar Leg (not shown) in the same
way.

5

6. Attach the Rear Stabilizer Cover (5) to the
Stabilizer Bracket (86) with two M8 x 60mm
Screws (88). Next, attach the Stabilizer Block
(90) to the Stabilizer Bracket with two M4 x
15mm Screws (52).

32

6

52

90

88

35

65

52

88

86

5

8