NordicTrack NETL12807.0, C 2000 User Manual

With Universal Dock for iPod

Model No. NETL12807.0
Serial No.

Write the serial number in the space
above for reference.

Serial

Number

Decal

QUESTIONS?

As a manufacturer, we are commit­ted to providing complete customer
satisfaction. If you have questions,
or if there are missing parts,
please contact us at the numbers
or addresses listed below:

USER'S MANUAL

Call: 08457 089 009

Outside UK: 0 (44) 113 3877133

Fax: [phone]

E-mail: [e-mail]

Write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road, Beeston
Leeds, LS11 8JG,
UK

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Save this manual
for future reference.

TABLE OF CONTENTS

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OW TO USE THE CHEST PULSE SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

H

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

RECYCLING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

WARNING DECAL PLACEMENT

The decals shown here have been applied
in the locations shown. If a decal is miss-

ing or illegible, call the telephone num­ber on the front cover of this manual
and request a free replacement decal.
Apply the decal in the location shown.

Note: The decals may not be shown at ac­tual size.

NordicTrack is a registered trademark of ICON IP, Inc.

iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

2

IMPORTANT PRECAUTIONS

WARNING: T

structions in this manual and all warnings on your treadmill before using your treadmill. ICON as­sumes no responsibility for personal injury or property damage sustained by or through the use of
this product.

1. Before beginning any exercise program, con­sult your physician. This is especially impor­tant for persons over the age of 35 or per­sons with pre-existing health problems.

2. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.

3. Use the treadmill only as described.

4. Place the treadmill on a level surface, with at
least 8 ft. (2.4 m) of clearance behind it and 2
ft. (0.6 m) on each side. Do not place the
treadmill on any surface that blocks air open­ings. To protect the floor or carpet from dam­age, place a mat under the treadmill.

5. Keep the treadmill indoors, away from mois­ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

o reduce the risk of serious injury, read all important precautions and in-

11. When connecting the power cord (see page

12), plug the power cord into an earthed cir­cuit. No other appliance should be on the
same circuit. When replacing the fuse, an
ASTA approved BS1362 type should be fitted
to the fuse carrier. A 13 amp fuse should be
used.

12. If an extension cord is needed, use only a 3­conductor, 1mm2(14-gauge) cord that is no
longer than 1.5 m.

13. Keep the power cord away from heated sur­faces.

14. Never move the walking belt while the power

is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See TROU­BLESHOOTING on page 22 if the treadmill is
not working properly.)

6. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.

7. Keep children under the age of 12 and pets
away from the treadmill at all times.

8. The treadmill should be used only by per­sons weighing 300 lbs. (136 kg) or less.

Never allow more than one person on the

9.
treadmill at a time.

Wear appropriate exercise clothes when

10.
using the treadmill. Do not wear loose
clothes that could become caught in the
treadmill. Athletic support clothes are recom­mended for both men and women.

Always
wear athletic shoes. Never use the treadmill
with bare feet, wearing only stockings, or in
sandals.

15. Read, understand, and test the emergency
stop procedure before using the treadmill (see
HOW TO TURN ON THE POWER on page 14).

16. Never start the treadmill while you are stand­ing on the walking belt. Always hold the
handrails while using the treadmill.

The treadmill is capable of high speeds.

17.
Adjust the speed in small increments to
avoid sudden jumps in speed.

18. The pulse sensors are not medical devices.
Various factors, including the user's move
ment, may affect the accuracy of heart rate
readings. The pulse sensors are intended
only as an exercise aid in determining heart
rate trends in general.

-

3

9. Never leave the treadmill unattended while it

1

s running. Always remove the key, unplug

i
the power cord, and switch the reset/off cir­cuit breaker to the off position when the
treadmill is not in use. (See the drawing on
page 5 for the location of the circuit breaker.)

20. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD
AND MOVE THE TREADMILL on page 20.)
You must be able to safely lift 45 lbs. (20 kg)
to raise, lower, or move the treadmill.

21. When folding or moving the treadmill, make
sure that the storage latch is fully closed.

22. Never insert any object into any opening on
the treadmill.

SAVE THESE INSTRUCTIONS

3. Inspect and properly tighten all parts of the

2

readmill regularly.

t

24.

DANGER: Always unplug the power

cord immediately after use, before cleaning the

readmill, and before performing the mainte-

t
nance and adjustment procedures described in
this manual. Never remove the motor hood un­less instructed to do so by an authorized ser­vice representative. Servicing other than the
procedures in this manual should be performed
by an authorized service representative only.

25. This treadmill is intended for in-home use
only. Do not use this treadmill in a commer­cial, rental, or institutional setting.

4

BEFORE YOU BEGIN

hank you for selecting the revolutionary NordicTrack

T

2000 treadmill with Universal Dock for iPod. The

C
C2000 treadmill offers a selection of features designed
to make your workouts at home more enjoyable and
effective. And when you’re not exercising, the unique
C2000 treadmill can be folded up, requiring less than
half the floor space of other treadmills.

For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-

Speakers

Accessory Tray

Handrail

Upright

®

ng this manual, please see the front cover of this man-

i

al. To help us assist you, note the product model

u
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

Console

Pulse Sensor

Key/Clip

Walking Belt

Foot Rail

Rear Roller
Adjustment Bolts

Reset/Off

Circuit Breaker

Platform Cushion

5

ASSEMBLY

#8 x 3/4" Screw (1)–4

3/8" Nut (8)–3

#8 x 1" Tek Screw (2)–4

Base Pad Spacer

(13)–2

1/4" Star Washer

(33)–2

3/8" Star Washer

(9)–4

5/16" Star

Washer (10)–4

5/16" x 3 1/4" Bolt (7)–4

1/4" x 1 1/4" Bolt (5)–2

3/8" x 2" Bolt (4)–3

3/8" x 5 1/4" Bolt (6)–4

ssembly requires two persons.Set the treadmill in a cleared area and remove all packing materials. Do not

A

dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is
coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the
top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor­mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,
non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver ,
adjustable wrench , and rubber mallet .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to

one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assembly.
Extra hardware may be included.

6

ake sure that the power cord is unplugged.

1.M
1

With the help of a second person, carefully tip
the treadmill onto its left side. Partially fold the
Frame (56) so that the treadmill is more stable;

do not fully fold the Frame yet.

Remove and discard the two indicated bolts (A)
and the shipping bracket (B).

Cut the ties securing the Upright Wire (38) to the
Base (83). Locate the tie in the indicated hole in
the Base, and use the tie to pull the Upright Wire
out of the hole.

Attach a Base Pad (81) to the Base (83) in the
location shown with a Base Pad Spacer (13) and
a #8 x 1" Tek Screw (2). Then, attach another
Base Pad (81) with only a #8 x 1" Tek Screw (2).

2. Remove the 3/8" Nut (8), the 3/8" x 2" Bolt (4),

and the shipping bracket (C) from the Base (83).
Attach a Wheel (84) with the Bolt and the Nut
that you just removed. Do not overtighten the
Nut; the Wheel must turn freely. Discard the
shipping bracket.

Tie

56

B

ole

H

38

13

81

2

A

83

1

8

2

2

3. Identify the Right Upright (78) and the Right

Upright Spacer (79), which are marked with
stickers. Insert the Upright Wire (38) through the
Right Upright Spacer as shown.

See the inset drawing. Tie the long tie in the
Right Upright (78) securely around the end of
the Upright Wire (38). With the help of a second
person, hold the Right Upright near the Base
(83). Then, pull the other end of the long tie until
the Upright Wire is routed completely through
the Right Upright.

4

83

84

C

8

3

38

78

Long Tie

38

83

79

78

38

Long

Tie

7

4. Set the Right Upright Spacer (79) on the Base

83). Be careful not to pinch the Upright Wire

(

(38).

With the help of a second person, insert
two 3/8" x 5" Bolts (6) with two 3/8" Star
Washers (9) into the Right Upright (78), and set

he Right Upright into the Right Upright Spacer.

t
If necessary, use a rubber mallet on top of the
Right Upright to make sure that the Upright is
fully inserted into the Right Upright Spacer.

4

6

77

8

7

79

9

Finger tighten the 3/8" x 5" Bolts (6);

do not

fully tighten the Bolts yet.

Press a Base Endcap (77) into the Base (83).

5. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (56) so the treadmill is more stable;

do

not fully fold the Frame yet.

Remove and discard the two indicated bolts (A)
and the shipping bracket (B).

Attach a Base Pad (81) to the Base (83) in the
location shown with a #8 x 1" Tek Screw (2) and
a Base Pad Spacer (13). Then, attach another
Base Pad (81) with only a #8 x 1" Tek Screw (2).

Remove the 3/8" Nut (8), the 3/8" x 2" Bolt (4),
and the shipping bracket (C) from the Base (83).
Attach a Wheel (84) with the Bolt and the Nut
that you just removed. Do not overtighten the
Nut; the Wheel must turn freely. Discard the
shipping bracket.

38

83

5

A

81

B

83

56

2

4

13

84

81

2

C

8

6. Set the Left Upright Spacer (76) on the Base
(83). With the help of a second person, insert
two 3/8" x 5" Bolts (6) with two 3/8" Star
Washers (9) into the Left Upright (74), and set
the Left Upright into the Left Upright Spacer. If
necessary, use a rubber mallet on top of the Left
Upright to make sure that the Upright is fully in­serted into the Left Upright Spacer.

Finger tighten the 3/8" x 5" Bolts (6); do not

fully tighten the Bolts yet.

Press a Base Endcap (77) into the Base (83).

With the help of a second person, tip the tread­mill so that the Base (83) is flat on the floor.

6

77

6

9

76

74

83

8

7. Set the console assembly face down on a soft

urface to avoid scratching the console assem-

s
bly. Hold the Right Handrail (95) near the con­sole assembly. Next, insert the console wire into
the large hole in the Right Handrail and out of

he top as shown. If necessary, use needlenose

t
pliers to help pull the console wire out.

Attach the Right Handrail (95) and the Left
Handrail (not shown) with four #8 x 3/4" Screws
(1) (two are shown).

Make sure that no wires
are pinched. Start all four Screws before
tightening any of them; do not overtighten
the Screws.

7

onsole

C

ire

W

ole

5

9

1

H

1

Console

Assembly

8. Tighten a 1/4" x 1 1/4" Bolt (5) with a 1/4" Star
Washer (33) into the bracket and the Handrail
Crossbar (94) on each side of the console as­sembly (only one side is shown).

Remove the wire tie from the console wire.

9. Remove the long tie from the Upright Wire (38).

Have a second person hold the console assem­bly near the Right Upright (78) and the Left
Upright (not shown). Connect the Upright Wire
(38) to the console wire.

See the inset drawing.
The connectors should slide together easily
and snap into place. If they do not, turn one
connector and try again. IF THE CONNECTORS
ARE NOT CONNECTED PROPERLY, THE
CONSOLE MAY BE DAMAGED WHEN THE
POWER IS TURNED ON.

8

9

Console

Assembly

Console

Wire

Console

Assembly

33

5

Wire

Tie

94

Attach the console assembly to the Right Upright
(78) and the Left Upright (not shown) with four
5/16" x 3 1/4" Bolts (7) and four 5/16" Star
Washers (10) (only two are shown). Be careful

not to pinch the wires.

See steps 4 and 6. Tighten the four 3/8" x 5"

Bolts (6).

78

38

Long

Console

Wire

Tie

10

7

38

9

10. Identify the Storage Latch (53). Remove the tie
rom the end of the tube. Make sure that the

f
sleeve has been slid over the indicated hole and
that the Latch Knob (54) is locked into the indi­cated hole.

hat it is locked into place.

t

Pull on the sleeve to make sure

0

1

4

5

11. Raise the Frame (56) to the position shown.

Have a second person hold the Frame until
this step is completed.

Orient the Storage Latch (53) so that the large
barrel and the Latch Knob (54) are in the posi­tions shown.

Attach the Latch Bracket (14) and Storage Latch
(53) to the Base (83) with two 3/8" x 2" Bolts (4)
and two 3/8" Nuts (8).

Attach the upper end of the Storage Latch (53)
to the bracket on the Frame (56) with a 3/8" x 2"
Bolt (4) and a 3/8" Nut (8). Note: It may be nec­essary to move the Frame back and forth to
align the Storage Latch with the bracket.

11

Tube

Sleeve

8

54

56

4

53

Large
Barrel

14

Hole

53

83

Lower the Frame (56) (see HOW TO LOWER
THE TREADMILL FOR USE on page 21).

12. Press the Left Accessory Tray (99) and the

Right Accessory Tray (106) into the Console
Base (91).

12

8

4

99

106

91

13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear

plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread­mill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used
to adjust the walking belt (see pages 23 and 24).

10

HOW TO USE THE CHEST PULSE SENSOR

OW TO PUT ON THE CHEST PULSE SENSOR

H

he chest pulse sensor consists of two components:

T
the chest strap and the sensor unit (see the drawing
below). Insert the tab on one end of the chest strap into
the hole in one end of the sensor unit, as shown in the
inset drawing. Press the end of the sensor unit under
the buckle on the chest strap. The tab should be flush
with the front of the sensor unit.

Chest Strap

Tabs

Tab

Sensor Unit

Next, wrap the chest
pulse sensor around
your chest and attach
the other end of the
chest strap to the
sensor unit. Adjust
the length of the
chest strap, if neces­sary. The chest pulse sensor should be under your
clothes, tight against your skin, and as high under the
pectoral muscles or breasts as is comfortable. Make
sure that the logo on the sensor unit is facing forward
and is right-side-up.

Next, pull the sensor unit away from your body a few
inches and locate the two electrode areas on the inner
side (the electrode areas are covered by shallow
ridges). Using saline solution such as saliva or contact
lens solution, wet both electrode areas. Return the
sensor unit to a position against your chest.

Sensor

Unit

Buckle

Store the chest pulse sensor in a warm, dry place.

•
Do not store the chest pulse sensor in a plastic bag

r other container that may trap moisture.

o

• Do not expose the chest pulse sensor to direct sun­light for extended periods of time; do not expose it to
temperatures above 120° F (50° C) or below 15° F
(-10° C).

• Do not excessively bend or stretch the sensor unit
when using or storing the chest pulse sensor.

• Clean the sensor unit using a damp cloth—never
use alcohol, abrasives, or chemicals. The chest
strap may be hand washed and air dried.

CHEST PULSE SENSOR TROUBLESHOOTING

The instructions on the following pages explain
how the chest pulse sensor is used with the con­sole. If the chest pulse sensor does not function
properly, try the steps below.

• Make sure that you are wearing the chest pulse sen­sor as described at the left. Note: If the chest pulse
sensor does not function when positioned as de­scribed, move it slightly lower or higher on your chest.

• Use saline solution such as saliva or contact lens
solution to wet the two electrode areas on the sensor
unit. If heart rate readings do not appear until you
begin perspiring, rewet the electrode areas.

• As you walk or run on the treadmill, position your­self near the center of the walking belt.

sole to display heart rate readings, the user must
be within arm’s length of the console.

• The chest pulse sensor is designed to work with
people who have normal heart rhythms. Heart rate
reading problems may be caused by medical condi­tions such as premature ventricular contractions
(pvcs), tachycardia bursts, and arrhythmia.

For the con-

CHEST PULSE SENSOR CARE AND MAINTENANCE

• Thoroughly dry the chest pulse sensor after each
use. The chest pulse sensor is activated when the
electrode areas are wetted and the heart rate
monitor is put on; the chest pulse sensor shuts off
when it is removed and the electrode areas are
dried. If the chest pulse sensor is not dried after
each use, it may remain activated longer than nec
essary, draining the battery prematurely.

• The operation of the chest pulse sensor can be af­fected by magnetic interference caused by high
power lines or other sources. If it is suspected that
this is a problem, try relocating the treadmill.

• The CR2032 battery may need to be replaced (see
page 24).

-

1

1

OPERATION AND ADJUSTMENT

HE PRE-LUBRICATED WALKING BELT

T

our treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili-

Y

cone spray or other substances to the walking belt or the walking platform. Such substances will deterio­rate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed. If it should malfunction or break

down, earthing provides a path of least resistance for electric cur­rent to reduce the risk of electric shock. This product is equipped
with a power cord having an equipment-earthing conductor and an
earthing plug.

be replaced with a manufacturer-recommended power cord.

See drawing 1. Plug the indicated end of the power cord into the
socket on the treadmill.

See drawing 2. Press the pins on the power cord into the metal clips
in the adapter as shown. Close the adapter cover over the end of the
power cord and tighten the screw in the adapter.

sure that the adapter cover is secure and the screw has been
tightened before using the power cord.

See drawing 3. Plug the power cord into an appropriate outlet that is
properly installed and earthed in accordance with all local codes and
ordinances. Important: The treadmill is not compatible with

RCD-equipped outlets.

Important: If the power cord is damaged, it must

Important: Make

1

2

Screw

Adapter

3

Socket on Treadmill

Adapter

Cover

Pins

Metal

Clips

Outlet

DANGER: Improper connection of the equipment-earthing conductor can result in an in-

creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as
to whether the product is properly earthed. Do not modify the plug provided with the product—if it will
not fit the outlet, have a proper outlet installed by a qualified electrician.

12

ONSOLE DIAGRAM

C

Navigation Buttons

FEATURES OF THE CONSOLE

The treadmill console offers an impressive array of
features designed to help you get the most from your
workouts. When the manual mode of the console is se­lected, the speed and incline of the treadmill can be
changed with the touch of a button. As you exercise,
the console will display continuous exercise feedback.
You can even measure your heart rate using the built­in handgrip pulse sensor.

In addition, the console features fifteen preset work­outs—five weight loss, five performance, and five aero­bic workouts. Each workout automatically controls the
speed and incline of the treadmill as it guides you
through an effective workout.

The console also features the new iFIT Interactive
Workout system. The iFIT system enables the console
to accept iFIT Interactive Workout Cards containing
workouts designed to help you achieve specific fitness
goals. For example, lose unwanted pounds with the 8­week Weight Loss workout, or train for a long-distance
run with the Marathon workout.

iFIT workouts automati
cally control the treadmill while the voice of a personal
trainer coaches you and motivates you through every
step of your workout. One iFIT card with three new
workouts is included. Additional iFIT cards are available
separately.

To purchase iFIT cards at any time, go to

www.iFIT.com or call the telephone number on the

front cover of this manual. iFIT cards are also
available at select stores.

You can even listen to your favorite workout music or
audio books with the console’s premium stereo sound
system while you get in shape. This product has been
designed specifically to work with iPod and has been
certified by the developer to meet Apple performance
standards.

To use the manual mode of the console, follow the
steps beginning on page 14. To use a preset workout,
see page 17. To use an iFIT card, see page 18. To

use the stero sound system, see page 19.

IMPORTANT: If there are sheets of clear plastic on
the console, remove the plastic.

To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The first time you use the
treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 24).

ote: The console can display speed and distance in

N

­either kilometers or miles. To find out which unit of
measurement is selected or to change the unit of mea­surement, see THE INFORMATION MODE on page

Note: For simplicity, all instructions in this section

.

19
refer to kilometers.

13

HOW TO TURN ON THE POWER

HOW TO USE THE MANUAL MODE

MPORTANT: If the treadmill has been exposed to

I
cold temperatures, allow it to warm to room tem-

erature before turning on the power. If you do not

p
do this, the console displays or other electrical
components may become damaged.

Plug in the power cord
(see page 12). Next, lo­cate the reset/off circuit
breaker on the treadmill

Reset

Position

frame near the power
cord. Switch the circuit
breaker to the reset position.

IMPORTANT: The console features a display demo
mode, designed to be used if the treadmill is dis­played in a store. If the displays light as soon as
you plug in the power cord and switch the circuit
breaker to the reset position, the demo mode is
turned on. To turn off the demo mode, hold down
the Stop button for a few seconds. If the displays
remain lit, see THE INFORMATION MODE on page
19 to turn off the demo mode.

Next, stand on the foot
rails of the treadmill. Find

Key

the clip attached to the key
(see the drawing to the
right) and slide the clip

Clip

onto the waistband of your
clothes. Then, insert the key into the console. After a
moment, the displays will light.

IMPORTANT: In an
emergency situation, the key can be pulled from
the console, causing the walking belt to slow to a
stop. Test the clip by carefully taking a few steps
backward; if the key is not pulled from the console,
adjust the position of the clip.

. Insert the key into the console.

1

ee HOW TO TURN ON THE POWER to the left.

S

2. Select the manual mode.

When the key is
inserted, the man­ual mode will be
selected. If a
workout has been
selected, reselect
the manual mode
by removing the key and then reinserting it.

3. Start the walking belt.

To start the walking belt, press the Start button, the
Speed increase button, or one of the speed but­tons numbered 2 through 20.

If you press the Start button or the Speed increase
button, the walking belt will begin to move at 2
Km/H. As you exercise, change the speed of the
walking belt as desired by pressing the Speed in­crease and decrease buttons. Each time you press
the Speed increase or decrease button, the speed
setting will change by 0.1 Km/H; if you hold down a
button, the speed setting will change in increments
of 0.5 Km/H. Note: After you press the buttons, it
may take a moment for the walking belt to reach the
selected speed setting.

If you press one of the speed buttons numbered 2
through 20, the walking belt will gradually increase
in speed until it reaches the selected speed setting.

To stop the walking belt, press the Stop button.
restart the walking belt, press the Start button, the
Speed increase button, or one of the numbered
speed buttons.

To

14

4. Change the incline of the treadmill as desired.

o change the

T
incline of the

readmill, press

t
the Incline in­crease and de­crease buttons.
Each time you press the Incline increase or de­crease button, the incline will change by 0.5%. To
change the incline quickly, press one of the incline
buttons numbered 0 through 12. Note: After you
press the Incline buttons, it may take a moment for
the treadmill to reach the selected incline setting.

5. Select a display mode and monitor your

progress with the display.

As you walk or run on the treadmill, the display can
show the following workout information:

• The speed of the walking belt.

• Your walking or running pace, in minutes per
kilometer or minutes per mile.

• Your heart rate. Note: Your heart rate can be
displayed only while you use the handgrip

ulse sensor or the chest pulse sensor.

p

The display can also show an animation of a

•
road.

When the manual mode is selected, the console of­fers three display modes. The display mode that
you select will determine which workout information
is shown. Press the Display button repeatedly to
select the desired display mode.

Regardless of which display mode you select, the
speed or incline setting will appear in the display for
a few seconds each time you change the setting.

You can change the volume level by pressing the
Volume increase and decrease buttons.

As you exercise, the workout intensity level bar will
indicate the approximate intensity level of your ex­ercise. For example, if eight of the indicators in the
bar are lit, the bar shows that your intensity level is
ideal for aerobic exercise.

• The approximate number of calories you have
burned.

• The elapsed time.

• The distance that you have walked or run.

• The number of laps you have completed.

• The incline setting of the treadmill whenever
the incline setting changes.

Workout Intensity Level Bar

To reset the console, press the Stop button, re­move the key, and then reinsert the key.

15

6. Measure your heart rate if desired.

7. Turn on the fan if desired.

ote: If you use the handgrip pulse sensor and

N
the chest pulse sensor at the same time, the

onsole will not display your heart rate accu-

c
rately. See page 11 for more information on the

chest pulse sensor.

Before using the
handgrip pulse
sensor, remove
the clear plastic
film from the
metal contacts.

Contacts
In addition,
make sure that
your hands are
clean.

To measure your heart rate,

and hold the metal contacts—avoid moving

rails

stand on the foot

your hands. When your pulse is detected, your
heart rate will be shown. For the most accurate
heart rate reading, continue to hold the contacts
for about 15 seconds.

he fan features low, high, and auto speed set-

T
tings. Press the Fan button repeatedly to select a

an speed or to turn off the fan. When the auto

f
mode is selected, the speed of the fan will auto­matically increase and decrease as the speed of
the walking belt increases and decreases. Note: If
the fan is on when the walking belt is stopped, the
fan will turn off automatically after a few minutes.

8.

When you are finished exercising, remove the
key from the console.

Step onto the foot rails, press the Stop button, and

adjust the incline of the treadmill to the lowest
setting. The incline must be at the lowest setting
or you may damage the treadmill when you fold
it to the storage position. Next, remove the key

from the console and put it in a secure place.

When you are finished using the treadmill, switch
the reset/off circuit breaker to the “off” position and
unplug the power cord.

IMPORTANT: If you do
not do this, the treadmill’s electrical compo­nents may wear prematurely.

16

HOW TO USE A PRESET WORKOUT

. Insert the key into the console.

1

ee HOW TO TURN ON THE POWER on page

S

14.

2. Select one of the preset workouts.

To select a
weight loss
workout or a
performance
workout, press
the Weight Loss
Workouts button or the Performance Workouts but­ton repeatedly. Profiles of the speed settings of the
workouts will appear in the display. To select an
aerobic workout, press the Weight Loss Workouts
button and then press the down Navigation button
until the aerobic profiles appear in the display. Use
the Navigation buttons to highlight the desired pro­file. The maximum speed setting and maximum in­cline setting of the workout will be shown. Press
Enter to select the workout.

As each preset
workout is se­lected, the max­imum speed
setting of the
workout and the
maximum incline setting of the workout will flash in
the display for a few seconds. The workout time
and a profile of the speed settings of the workout
will appear in the display.

3. Press the Start button or the Speed increase
button to start the workout.

A moment after you press the button, the treadmill
will automatically adjust to the first speed and in­cline settings for the workout.

Hold the handrails

and begin walking.

A profile of the
speed settings of

he workout will

t
appear in the dis-

lay. A small

p
arrow below the
profile will indicate your progress.

At the end of the first one-minute segment of the
workout, a series of tones will sound. If a different
speed setting and/or incline setting is programmed
for the second segment, the speed setting and/or
incline setting will flash in the display for a moment
to alert you. The treadmill will then automatically
adjust to the speed and incline settings for the sec­ond segment.

The workout will continue in this way until the small
arrow reaches the right end of the profile. The
walking belt will then slow to a stop.

If the speed or incline setting is too high or too low
at any time during the workout, you can override
the setting by pressing the Speed or Incline but-

however, when the next segment begins,

tons;

the treadmill will automatically adjust to the
speed and incline settings for the next
segment.

To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but­ton. The walking belt will begin to move at 2 Km/H.
When the next segment of the workout begins, the
treadmill will automatically adjust to the speed and
incline settings for the next segment.

4.

Select a display mode and monitor your
progress with the display.

See step 5 on page 15.

5.

Measure your heart rate if desired.

See step 6 on page 16.

Each workout is divided into one-minute segments.
One speed setting and one incline setting are pro
grammed for each segment. Note: The same speed
and/or incline setting may be programmed for con­secutive segments.

6.

Turn on the fan if desired.

­See step 7 on page 16.

7.

When you are finished exercising, remove the
key from the console.

See step 8 on page 16.

17

HOW TO USE AN IFIT CARD

1.

nsert the key into the console.

I

ee HOW TO TURN ON THE POWER on page

S

14.

2.

Insert an iFIT card and select a workout.

To use an iFIT workout, insert an iFIT card into the
iFIT slot; make sure that the iFIT card is oriented
so the metal contacts are face-down and are in­serted into the iFIT slot.

iFIT Slot

iFIT Card

Next, select an iFIT workout by pressing the iFIT
up and down buttons next to the iFIT slot. When an
iFIT workout is selected, the display will show the
name of the workout, the maximum incline setting
and the maximum speed setting of the workout,
and the workout time. In addition, a profile of the
speed settings of the workout will appear in the dis­play.

Each iFIT workout is divided into several one­minute segments. One speed setting and one in­cline setting are programmed for each segment.
Note: The same speed and/or incline setting may
be programmed for consecutive segments.

During the workout, a personal trainer will guide you
through the workout. You can select an audio setting

or your personal trainer (see THE INFORMATION

f
MODE on page 19).

If the speed or incline setting for the current seg­ment is too high or too low, you can manually over­ride the setting by pressing the Speed or Incline
buttons;

however, when the next segment be­gins, the treadmill will automatically adjust to
the speed and incline settings for the next seg­ment.

To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but­ton or the Speed increase button. The walking belt
will begin to move at 2 Km/H. When the next seg­ment of the workout begins, the treadmill will auto­matically adjust to the speed and incline settings for
the next segment.

4.

Select a display mode and monitor your
progress with the display.

See step 5 on page 15.

5.

Turn on the fan if desired.

See step 7 on page 16.

6.

When you are finished exercising, remove the
key from the console.

See step 8 on page 16.

CAUTION: Always remove iFIT cards from the
iFIT slot when you are not using them.

3.

Press the Start button or the Speed increase
button to start the workout.

A moment after the button is pressed, the treadmill
will automatically adjust to the first speed and in­cline settings of the workout. Hold the handrails
and begin walking.

18

HOW TO USE THE STEREO SOUND SYSTEM

his product has been designed specifically to work

T
with iPod and has been certified by the developer to

eet Apple performance standards. To play music or

m
audio books through the console’s stereo speakers,
you must connect your iPod, MP3 player, CD player,
or other personal audio player to the console through
the audio jack or through the Integrated Universal
Dock for iPod.

To use the audio wire, locate the audio wire and plug it
into the audio jack near the speakers. Then plug the
audio wire into a jack on your MP3 player, CD player,
or other personal audio player.

Make sure that the

audio wire is fully plugged in.

To use the Integrated Universal Dock for iPod, you
need an iFIT Universal iPod Connector. Plug one end
into the Integrated Universal Dock for iPod near the
speakers and the other end into your iPod.

Make sure
that the iFIT Universal iPod Connector is fully
plugged in. To purchase an iFIT Universal iPod
Connector, please call the telephone number on
the front cover of this manual.

Next, press the Play button on your iPod, MP3 player,
CD player, or other personal audio player. Adjust the
volume on your personal audio player or press the
Volume increase and decrease buttons on the con­sole.

To select the information mode, hold down the Stop
button while inserting the key into the console and then

elease the Stop button. When the information mode is

r
selected, the following information will be shown:

You can select an audio setting if desired. When you
use an iFIT card, a personal trainer will guide you
through your workouts. If you select the “On” setting,
the personal trainer will give you detailed instructions.
If you select the “Off” setting, your personal trainer will
simply guide you through your iFIT workouts. To
change the audio setting, press the Incline decrease
button.

The display will show the total number of hours the
treadmill has been used.

The display will also show the total number of miles (or
kilometers) that the walking belt has moved.

The word “English” for miles or “Metric” for kilometers
will appear in the display. Press the Speed increase
button to change the unit of measurement if desired.

If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur­face and not on the console.

THE INFORMATION MODE

The console features a user’s mode that keeps track of
the total number of miles or kilometers that the walking
belt has moved and the total number of hours that the
treadmill has been operated. The user’s mode also al­lows you to select miles or kilometers as the unit of
measurement and to turn on and turn off the demo
mode. You can also choose an audio setting for your
iFIT workouts.

Note: The console features a display demo mode, de­signed to be used if the treadmill is displayed in a
store. While the demo mode is turned on, the console
will function normally when you plug in the power cord,
switch the reset/off circuit breaker to the reset position,
and insert the key into the console. However, when
you remove the key, the displays will remain lit, al­though the buttons will not function.

If the demo mode
is turned on, the word “On” will appear in the display
while the information mode is selected. To turn on or off
the demo mode, press the Speed decrease button.

To exit the information mode, remove the key from the
console.

19

HOW TO ADJUST THE CUSHIONING SYSTEM

Remove the key from the console and unplug the
power cord. The treadmill features a cushioning sys-

tem that reduces the impact as you walk or run on the
treadmill. To increase the firmness of the walking plat­form, step off the treadmill and slide the cushion ad­justers toward the front of the treadmill. To decrease
the firmness, slide the cushion adjusters toward the
back of the treadmill. Note: Make sure that both ad-

justers are set at the same firmness level. The
faster you run on the treadmill, or the more you
weigh, the firmer the walking platform should be.

Cushion
Platform

Increase

Decrease

HOW TO FOLD AND MOVE THE TREADMILL

ushion

C
Platform

Walking Platform

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the
lowest position. If you do not do this, you may damage the
treadmill when you fold it. Remove the key and unplug the
power cord. CAUTION: You must be able to safely lift 45
lbs. (20 kg) to raise, lower, or move the treadmill.

1. Hold the metal frame firmly in the location shown by
the arrow at the right. CAUTION: To decrease the pos­sibility of injury, do not lift the frame by the plastic
foot rails. Make sure to bend your legs and keep your
back straight as you raise the frame. Raise the frame

about halfway to the vertical position.

2. Raise the frame until the latch knob locks into the storage

position.

the storage position.

To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of di­rect sunlight. Do not leave the treadmill in the stor­age position in temperatures above 85° F (30° C).

Make sure that the latch knob is locked in

Frame

Latch Knob

20

HOW TO MOVE THE TREADMILL

efore moving the treadmill, convert the treadmill to the stor-

B
age position as described above. Make sure that the latch

nob is locked in the storage position.

k

1. Hold a handrail and the frame and place one foot against

one of the wheels.

2. Tilt the treadmill back until it rolls freely on the wheels.

Carefully move the treadmill to the desired location.

Never
move the treadmill without tipping it back. To reduce
the risk of injury, use extreme caution while moving
the treadmill. Do not attempt to move the treadmill
over an uneven surface.

3. Place one foot against a wheel, and carefully lower the
treadmill until it is resting in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

1. Hold the upper end of the treadmill with your right hand.

Pull the latch knob to the left and hold it. It may be neces­sary to push the frame forward as you pull the knob to
the left. Pivot the frame downward and release the latch
knob.

rame

F

Handrail

Wheels

Base

2. Hold the metal frame firmly with both hands and lower

it to the floor. CAUTION: Do not grip only the plastic
foot rails or drop the frame to the floor. Bend your
legs and keep your back straight.

Latch Knob

21

TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, please see the front cover of this manual.

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a properly earthed outlet. (See page 12.) If an ex-

tension cord is needed, use only a 3-conductor, 1 mm
m (5 ft.). Important: The treadmill is not compatible with RCD-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is inserted into the console.

c. Check the reset/off circuit breaker located on the

treadmill frame near the power cord. If the switch
protrudes as shown, the circuit breaker has
tripped. To reset the circuit breaker, wait for five
minutes and then press the switch back in.

PROBLEM: The power turns off during use

SOLUTION:

PROBLEM: The console displays remain lit when you remove the key from the console

a. Check the reset/off circuit breaker (see the drawing above). If the circuit breaker has tripped, wait

for five minutes and then press the switch back in.

b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for

five minutes, and then plug it back in.

c. Remove the key from the console. Reinsert the key into the console.

d. If the treadmill still will not run, please see the front cover of this manual.

2

(14-gauge) cord that is no longer than 1.5

c

Tripped

Position

Reset

Position

SOLUTION:

PROBLEM: The displays of the console do not function properly

SOLUTION:a.

a. The console features a display demo mode, designed to be used if the treadmill is displayed in a

store. If the displays remain lit when you remove the key, the demo mode is turned on. To turn off
the demo mode, hold down the Stop button for a few seconds. If the displays are still lit, see THE
INFORMATION MODE on page 19 to turn off the demo mode.

Remove the key from the console and

THE POWER CORD.

person, carefully tip down the Uprights (74, 78).
There may be two #8 x
tom of the Belly Pan (73). If there are, remove
them. Note: A Phillips screwdriver with a shaft at
least 5 in. (13 cm) long is required. Raise the
Uprights to a vertical position.

With the help of a second

2" Screws (105) in the bot-

UNPLUG

a

74

105

73

105

78

22

Remove the three #8 x 3/4" Screws (1) and care­fully pivot the Hood (61) off.

Locate the Reed Switch (71) and the Magnet (50)
on the left side of the Pulley (51). Turn the Pulley
until the Magnet is aligned with the Reed Switch.

Make sure that the gap between the Magnet and
the Reed Switch is about 1/8 in. (3 mm). If neces-

sary, loosen the 3/4" Reed Switch Screw (15),
move the Reed Switch slightly, and then retighten
the Screw. Reattach the Hood (not shown). If nec­cessary, tip down the Uprights (not shown), reat­tach the #8 x 2" Screws (not shown), and then raise
the Uprights. Run the treadmill for a few minutes to
check for a correct speed reading.

1/8 in.

Top

View

15

71

1

1

6

50

51

PROBLEM: The incline of the treadmill does not change correctly

SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re-

move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the

maximum incline level and then return to the minimum level. This will recalibrate the incline system.

PROBLEM: The walking belt slows when walked on

SOLUTION:

a. If an extension cord is needed, use only a 3-conductor, 1 mm2(14-gauge) cord that is no longer

than 1.5 m (5 ft.).

b. If the walking belt is overtightened, treadmill perfor-

mance may decrease and the walking belt may be-

b

2–3 in.

come damaged. Remove the key and UNPLUG

THE POWER CORD

. Using the hex key, turn both
rear roller bolts counterclockwise, 1/4 of a turn.
When the walking belt is properly tightened, you
should be able to lift each edge of the walking belt
2 to 3 in. (5 to 7 cm) off the walking platform. Be
careful to keep the walking belt centered. Then,
plug in the power cord, insert the key, and run the
treadmill for a few minutes. Repeat until the walk

-

Rear Roller Bolts

ing belt is properly tightened.

If the walking belt still slows when walked on, see the front cover of this manual.

c.

23

PROBLEM: The walking belt is off-center or slips when walked on

OLUTION: a.I

S

f the walking belt is off-center,first remove the

key and UNPLUG THE POWER CORD. If the

alking belt has shifted to the left,use the hex

w

key to turn the left rear roller bolt clockwise 1/2 of a
turn;

if the walking belt has shifted to the right,

turn the bolt counterclockwise 1/2 of a turn. Be
careful not to overtighten the walking belt. Then,
plug in the power cord, insert the key, and run the
treadmill for a few minutes. Repeat until the walk­ing belt is centered.

If the walking belt slips when walked on, first re-

b.

move the key and

UNPLUG THE POWER CORD.
Using the hex key, turn both rear roller bolts clock­wise, 1/4 of a turn. When the walking belt is cor­rectly tightened, you should be able to lift each
edge of the walking belt 2 to 3 in. (5 to 7 cm) off
the walking platform. Be careful to keep the walk­ing belt centered. Then, plug in the power cord, in­sert the key, and carefully walk on the treadmill for
a few minutes. Repeat until the walking belt is
properly tightened.

PROBLEM: The chest pulse sensor does not function properly

a

b

SOLUTION: a. If the chest pulse sensor does not function properly, see CHEST PULSE SENSOR TROUBLE-

SHOOTING on page 11.

b. If the chest pulse sensor still does not function properly, the battery

should be changed. To replace the battery, first locate the battery

b

Battery Cover

cover on the back of the sensor unit. Insert a coin into the slot in the
cover, and turn the cover counterclockwise to the “open” position.
Then, remove the cover.

Next, remove the old battery from the sensor unit, and insert a new
CR 2032 battery, with the battery oriented so the writing is on

top.

Make sure that the rubber gasket is in place in the sensor unit.

Then, reinsert the battery cover and turn it to the closed position.

Battery

Cover

Battery

Rubber
Gasket

24

EXERCISE GUIDELINES

WARNING: Before beginning this

or any exercise program, consult your physi­cian. This is especially important for persons
over the age of 35 or persons with pre-exist­ing health problems.

The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is in­tended only as an exercise aid in determining
heart rate trends in general.

These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.

Burning Fat—To burn fat effectively, you must exer­cise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses
the first few minutes of exercise does your body begin

o use stored

t
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.

Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic exer­cise, which is activity that requires large amounts of
oxygen for prolonged periods of time. For aerobic ex­ercise, adjust the intensity of your exercise until your
heart rate is near the highest number in your training
zone.

carbohydrate calories

at calories

f

or energy. If your goal is to

f

for energy. Only after

EXERCISE INTENSITY

Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper inten­sity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.

To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the near­est ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.

WORKOUT GUIDELINES

Warming up—Start with 5 to 10 minutes of stretching

and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.

Training Zone Exercise—Exercise for 20 to 30 min­utes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise–never hold your breath.

Cooling down—
ing. Stretching increases the flexibility of your muscles
and helps to prevent post-exercise problems.

EXERCISE FREQUENCY

To maintain or improve your condition, complete three
workouts each week, with at least one day of rest be­tween workouts. After a few months of regular exer­cise, you may complete up to five workouts each
week, if desired. Remember, the key to success is to
make exercise a regular and enjoyable part of your
everyday life.

Finish with 5 to 10 minutes of stretch-

25

PART LIST—Model No. NETL12807.0 R

To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual.

ey No. Qty. Description Key No. Qty. Description

K

1007A

1 25 #8 x 3/4" Screw
2 4 #8 x 1" Tek Screw
3 1 Hex Key
4 4 3/8" x 2" Bolt
5 2 1/4" x 1 1/4" Bolt
6 4 3/8" x 5 1/4" Bolt
7 4 5/16" x 3 1/4" Bolt
8 10 3/8" Nut

9 4 3/8" Star Washer
10 4 5/16" Star Washer
11 5 #8 x 3/4" Tek Screw
12 14 #8 x 1/2" Screw
13 2 Base Pad Spacer
14 1 Latch Bracket
15 1 3/4" Reed Switch Screw
16 10 #8 x 3/4" Screw
17 2 1/4" x 1" Bolt
18 2 5/16" x 4 1/4" Bolt
19 2 3/8" x 1 1/4" Bolt
20 2 Rear Roller Bolt
21 1 3/8" x 1 3/4" Bolt
22 1 3/8" x 1 1/2" Bolt
23 2 3/8" x 1" Bolt
24 2 #8 x 1/2" Isolator Screw
25 10 #12 x 1 1/4" Screw
26 2 Motor Bolt
27 2 Cushion Stop
28 1 Reset/Off Circuit Breaker
29 4 Belt Guide Screw
30 2 1/4" Flat Washer
31 2 1/4" Lock Washer
32 1
33 2 1/4" Star Washer
34 4 #8 x 1 3/4" Screw
35
36 2 5/16" Flange Nut
37 3 Hood Clip
38 1 Upright Wire
39 1 Lift Frame Ground Wire
40 2 Front Isolator
41 1 Left Foot Rail
42 1 Warning Decal
43 2 Walking Platform Cushion
44 1 Walking Platform
45 1 Walking Belt
46 2 Belt Guide
47 2 Cushion Track
48 2 Frame Spacer
49 2 Front Roller Spacer
50

1 Audio Wire

1

Transformer

Magnet

51 1 Front Roller/Pulley
52 2 15 1/2" Wire Tie
53 1 Storage Latch
54 1 Latch Knob
55 1 Right Foot Rail
56 1 Frame
57 2 Rear Roller Bracket
58 1 Rear Roller
59 1 Left Rear Foot
60 1 Right Rear Foot
61 1 Hood
62 1 Drive Belt
63 1 Motor Isolator
64 1 Motor
65 1 Lift Frame
66 2 Wire Tie
67 1 Controller Ground Wire
68 1 Power Cord
69 1 Power Cord Adapter
70 1 Controller
71 1 Reed Switch
72 1 Reed Switch Clip
73 1 Belly Pan
74 1 Left Upright
75 1 Incline Motor
76 1 Left Upright Spacer
77 2 Base Endcap
78 1 Right Upright
79 1 Right Upright Spacer
80 2 3/8" Lock Nut
81 4 Base Pad
82 2
83 1 Base
84 2 Wheel
85
86 9 8" Tie
87 1 Access Door
88 4 “U”-nut
89 1 Console
90 2 Upright Endcap
91 1 Console Base
92 1 Plastic Tie
93 1 Incline Wire
94 1 Handrail Crossbar
95 1 Right Handrail
96 1 Left Handrail
97 1 iFIT Card Kit
98 2 Handrail Endcap
99 1 Left Accessory Tray

100

2 Releasable Tie

1

Caution Decal

Key/Clip

26

Key No. Qty. Description Key No. Qty. Description

01 1 Console Ground Wire

1
102 1 5/32" Hex Key
103 1 Receptical
104 1 Lift Motor Spacer

05 2 #8 x 2" Screw

1
106 1 Right Accessory Tray
107 1 Frame/Roller Ground Wire
108 1 Electronics Bracket
109 1 Chest Pulse Strap
110 1 Chest Pulse Sensor
111 2 Chest Pulse Receiver Screw

16 1 3/4" Ground Bolt

1
117 1 #8 Ground Nut

* – 10" Blue Wire, M/F
* – 8" Blue Wire, 2F
*

– 4" Black Wire, 2F
* – 4" Black Wire, M/F
* – 8" Green/Yellow Wire, F/R
* – 4" Green/Yellow Wire, w/decal
* 2 8" White Wire, 2F
* – 4" Red Wire, M/F
* – User’s Manual

112 1 Chest Pulse Receiver
113 1 Filter
114 2 Motor Bushing

*These parts are not illustrated.
Specifications are subject to change without notice.

115 2 #8 Star Washer

27

4

4

54

53

8

8

17

17

18

18

20

20

31

30

31

30

60

59

12

29

29

46

46

25

25

25

25

25

41

36

36

49

50

48

43

44

42

45

49

51

55

58

43

56

57

57

48

3

25

25

25

47

16

16

16

47

16

16

16

34

34

24

40

24

40

27

27

107

102

12

12

EXPLODED DRAWING A—Model No. NETL12807.0 R

1007A

28

11

11

11

11

72

15

71

37

37

37

1

1

1

12

28

61

73

39

12

67

66

19

19

26

64

63

62

65

105

105

68

69

103

108

70

12

12

12

12

113

32

114

12

115

115

116

117

EXPLODED DRAWING B—Model No. NETL12807.0 R

1007A

29

81

2

81
2

81

2

4

84

8

8

84

4

6

9

6

9

21

22

80

80

75

23

23

8

8

77

77

74

83

82

76

79

82

13

81

2

13

104

86

85

52

38

4

8

14

38

78

7

10

7

10

90

8

8

88

90

93

EXPLODED DRAWING C—Model No. NETL12807.0 R

1007A

30

1

92

1

2

101

91

8

9

99

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

5

33

5

33

106

98

98

96

95

94

100

1

87

35

97

111

112

109

110

EXPLODED DRAWING D—Model No. NETL12807.0 R

1007A

31

ORDERING REPLACEMENT PARTS

To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro­vide the following information when contacting us:

• the model number and serial number of the product (see the front cover of this manual)

• the name of the product (see the front cover of this manual)

• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)

RECYCLING INFORMATION

This electronic product must not be disposed of in municipal waste. To
preserve the environment, this product must be recycled after its useful
life as required by law.

Please use recycling facilities that are authorized to collect this type of waste in
your area. In doing so, you will help to conserve natural resources and improve
European standards of environmental protection. If you require more information
about safe and correct disposal methods, please contact your local city office or
the establishment where you purchased this product.

Part No. 259004 R1007A

Printed in China

© 2007 ICON IP, Inc.