Nokia 9300 User Manual

Page 1
9236240
Issue 1 EN
Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation
Page 2
Nokia 9300 Using your device as a modem
Legal Notice Copyright © Nokia 2004. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or trade names of their respective owners. Nokia operates a policy of c ontinuous development. Nokia reserves t he right to make changes and improvements to any of the products described in this document without prior notice.
Copyright © 2004 Nokia. All rights reserved.
Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are prov ided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of mercha ntability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.
Copyright to the Windows screenshots belongs to Microsoft.
Page 3
Contents
Introduction............................................... 4
Bluetooth connection ............................... 5
Pairing your computer and device....................................5
Installing your device as a modem using
Bluetooth connectivity ........................................................6
Establishing a modem connection through
Bluetooth technology...........................................................9
Data cable connection............................ 12
Installing the cable modem..............................................12
Establishing a connection with a data cable ..............12
Infrared connection ................................ 17
Activating the infrared modem.......................................17
Establishing an infrared connection..............................17
Adjusting the connection speed ............ 22
Troubleshooting....................................... 23
Bluetooth connections.......................................................23
Data cable connections .....................................................23
Infrared connections...........................................................24
Contents
Copyright © 2004 Nokia. All rights reserved.
Page 4

Introduction

This document shows how you can install and use your Nokia 9300 as a modem through a Bluetooth, data cable, and infrared connection.
Introduction
To use any of the connections described in this document, you need a valid account with a network operator or an Internet service provider.
Copyright © 2004 Nokia. All rights reserved.
4
Page 5

Bluetooth connection

If your computer includes a compatible Bluetooth adapter, you can connect your Nokia 9300 to your computer through a Bluetooth connection and use your device as a modem through the Bluetooth connection.
Before you can use your device as a modem through the Bluetooth connection, you must install the correct modem driver (inf file) on your computer. Download the latest version from the Nokia site at www.nokia.com and copy the file to the inf folder of your Windows installation directory (for example, C:\WINNT\inf). If you have installed Nokia PC Suite on your computer, you do not need to download the modem driver separately, as it is included in Nokia PC Suite and copied automatically to the correct folder.
This document only describes one way of creating Bluetooth connections on the computer. Depending on the Bluetooth software installed on your computer, creating a Bluetooth connection from your computer to your Nokia 9300 may be different from the way described in this document.

Pairing your computer and device

Before your Nokia 9300 and your computer can communicate, they need to be paired with each other.
To pair your computer with your device:
1 Activate a Bluetooth connection on your computer. For
details, refer to your Bluetooth connectivity documentation.
2 Activate a Bluetooth connection on your Nokia 9300
by pressing Chr+.
3 Make sure that your Nokia 9300 is visible to all other
devices with Bluetooth connectivity:
• Press Desk, and select ToolsControl panel
ConnectionsBluetooth.
On the Settings tab, check that the value of the My
telephone’s visibility field is Shown to all.
4 To open the Paired devices tab, press Menu. 5 Press New. The device searches for all available devices
with Bluetooth connectivity and displays a list of found devices.
Copyright © 2004 Nokia. All rights reserved.
Bluetooth connection
5
Page 6
6 Select your computer from the Devices found list, and
press Pair.
7 Enter a passcode that is used for all connections
Bluetooth connection
between the devices, and click OK.
8 When prompted, enter the same passcode on your
computer.
9 Your devices are now paired and can communicate
with each other using the shared passcode.

Installing your device as a modem using Bluetooth connectivity

Once your computer and device have been paired, you can install your Nokia 9300 as a modem. You can do this by using the Install a New Modem wizard in your Windows.
To install your device as a modem using Bluetooth connectivity:
1 Activate a Bluetooth connection on your computer and
on your Nokia 9300.
Copyright © 2004 Nokia. All rights reserved.
6
Page 7
2 On your computer, select Start Settings Control
Panel, and double-click Phone and Modem Options.
3 To start the Windows Install New Modem wizard, click
Add.
4 Select the Don’t detect my modem; I will select it
from a list option, and click Next.
Bluetooth connection
Copyright © 2004 Nokia. All rights reserved.
7
Page 8
5 In the Manufacturers list, select Nokia, then select
Nokia 9300 Bluetooth.
Bluetooth connection
6 Click Next. 7 When prompted, accept the connection on your device
by pressing Accept.
8 Select the port that you want to use for the Bluetooth
modem connection, and click Next.
Copyright © 2004 Nokia. All rights reserved.
8
Page 9
9 When Windows has finished installing the modem,
click Finish.
10 A correctly installed modem is listed on the Windows
Phone and Modem Options, Modems tab.
Bluetooth connection

Establishing a modem connection through Bluetooth technology

Once you have installed your device as a modem using Bluetooth connectivity, you can establish a modem connection through a Bluetooth connection.
Copyright © 2004 Nokia. All rights reserved.
9
Page 10
To establish a modem connection through a Bluetooth connection:
1 Activate a Bluetooth connection on your computer
and on your Nokia 9300. You do not need to create a connection between the devices.
2 On your computer, right-click the Bluetooth icon on
the system tray, and select Quick Connect Dial-up Networking
Find Devices.
3 In Dial-Up Networking, select your device from the
Bluetooth connection
list, and click Connect.
Tip: You can authorize connections between
paired devices so that you are not prompted to accept a connection. Select the device from the Paired devices tab, press Edit, and change the value of the Device authorised field to Yes.
5 In Connect BluetoothConnection, enter your user
name and password and the phone number received from your network operator or Internet service provider, and click Dial.
10
4 On your device, accept the connection when prompted
by pressing Accept.
Copyright © 2004 Nokia. All rights reserved.
6 Wait for the connection to be established. Once the
connection is established, you can use it as any other modem connection.
For consecutive connections, you can establish the connection from the My Bluetooth Places folder or from
Page 11
the Bluetooth system tray icon Quick ConnectDial-up Networking menu. There is no need to pair the devices or install the modem again.
Bluetooth connection
Copyright © 2004 Nokia. All rights reserved.
11
Page 12

Data cable connection

12
When you connect your Nokia 9300 to a compatible PC with a DKU-2 data cable, you can use your device as a modem. Before you can use the data cable, you must install the Nokia Connectivity Cable driver on your computer. Download the latest version from the Nokia site at www.nokia.com and install the driver according to the installation instructions before you connect your computer and Nokia 9300 with a data cable.
Data cable connection
Note: If you have installed Nokia PC Suite 6.4 on your computer, you do not need to install the Nokia Connectivity Cable driver, as it is installed with Nokia PC Suite 6.4. However, make sure you install Nokia PC Suite before you connect your computer and Nokia 9300 with a data cable.

Installing the cable modem

Once you have installed the Nokia Connectivity Cable driver, you can install your Nokia 9300 as a cable modem.
To install your device as a cable modem:
1 Connect your computer and your Nokia 9300 with a
DKU-2 data cable. Windows locates the data cable driver automatically. If the Digital Signature Not Found dialog is displayed
Copyright © 2004 Nokia. All rights reserved.
during the process, click Yes to continue, and let Windows finish the installation.
2 On your computer, select Start Settings Control
Panel
Phone and Modem Options, and check that
the Modems tab includes your device (Nokia 9300 USB).

Establishing a connection with a data cable

Once you have installed your device as a cable modem, you can establish a modem connection through the data cable.
Page 13
To establish a modem connection through a data cable:
1 On your computer, select Start SettingsNetwork
and Dial-up connections.
2 Double-click Make New Connection, and click Next.
Data cable connection
3 In Network Connection Type, select either Dial-up to
private network or Dial-up to the Internet, and click
Copyright © 2004 Nokia. All rights reserved.
13
Page 14
Data cable connection
Next. For details on your connection type, contact your network operator or Internet service provider.
4 In Select a Device, select Modem - Nokia 9300 USB,
and click Next.
5 In Phone Number to Dial, enter the phone number
received from your network operator or Internet service provider, and click Next. For details on your
14
Copyright © 2004 Nokia. All rights reserved.
Page 15
phone number, contact your network operator or Internet service provider.
6 In Connection Availability, select either For all users
or Only for myself, and click Next.
Data cable connection
Copyright © 2004 Nokia. All rights reserved.
15
Page 16
7 Enter a name for the connection, and click Finish. 8 In Connect Dial-up Connection, enter your user name
and password, and click Dial to establish a connection to your Internet service provider.
Data cable connection
9 Wait for the connection to be established. Once the
connection is established, you can use it as any other modem connection.
For consecutive connections, you can establish a connection by double-clicking the connection name in
Network and Dial-up connections.
16
Copyright © 2004 Nokia. All rights reserved.
Page 17

Infrared connection

If your computer includes an infrared port, you can use your device as a modem through an infrared connection.
Before you can use your device as a modem through an infrared connection, you must install the correct modem driver (inf file) on your computer. Download the latest version from the Nokia site at www.nokia.com and copy the file to the inf folder of your Windows installation directory (for example, C:\WINNT\inf). If you have installed Nokia PC Suite on your computer, you do not need to download the modem driver separately, as it is included in Nokia PC Suite and copied automatically to the correct folder.

Activating the infrared modem

Activating infrared by pressing Chr+ starts an infrared connection that you can use to transfer files. To use infrared as a modem connection, you need to activate infrared as a modem on your Nokia 9300.
To activate the infrared modem on your device:
1 Press Desk, and then select ToolsModem.
2 Press Activate. The infrared modem connection is now
active, and you can install the modem on your computer.

Establishing an infrared connection

Once the infrared modem connection is active, you can install the infrared modem.
Copyright © 2004 Nokia. All rights reserved.
Infrared connection
17
Page 18
To install the infrared modem:
1 Select Start Settings Network and Dial-up
connections.
Infrared connection
2 Double-click Make New Connection, and click Next.
3 In Network Connection Type, select either Dial-up to
private network or Dial-up to the Internet, and click
18
Copyright © 2004 Nokia. All rights reserved.
Page 19
Next. For details on your connection type, contact your network operator or Internet service provider.
4 In Select a Device, select Infrared Modem Port, and
click Next.
Infrared connection
5 In Phone Number to Dial, enter the phone number
received from your network operator or Internet service provider, and click Next. For details on your
Copyright © 2004 Nokia. All rights reserved.
19
Page 20
Infrared connection
phone number, contact your network operator or Internet service provider.
6 In Connection Availability, select either For all users
or Only for myself, and click Next.
20
Copyright © 2004 Nokia. All rights reserved.
Page 21
7 Enter a name for the connection, and click Finish. 8 In Connect Dial-up Connection, enter your user
name and password, and click Dial to establish a connection to your Internet service provider.
9 Wait for the connection to be established. Once the
connection is established, you can use it as any other modem connection.
For consecutive connections, you can establish a connection by double-clicking the connection name in
Start
Settings Network and Dial-up connections.
Before you establish a connection, make sure that you activate the infrared modem on your device and that the infrared port of your device faces the infrared port of your computer.
Infrared connection
Copyright © 2004 Nokia. All rights reserved.
21
Page 22

Adjusting the connection speed

22
Nokia Modem Options software offers an easy way of adjusting the speed of your modem connection. Nokia Modem Options is included in Nokia PC Suite. You can download the latest version of Nokia PC Suite from the Nokia site at www.nokia.com.
Check available connection speeds from your network operator or Internet service provider.
To adjust the speed of a modem connection with Nokia Modem Options:
1 Make sure you have installed Nokia PC Suite on your
Adjusting the connection speed
computer.
2 On your computer, select Start SettingsControl
Panel
Nokia Modem Options.
Copyright © 2004 Nokia. All rights reserved.
3 From the Installed Nokia Modems list, select the
modem connection the speed of which you want to adjust.
4 Drag the slider left or right to the desired speed, and
click Apply.
Page 23

Troubleshooting

For all connections, always check that your user name and password are correct, and make sure that the network signal is good.

Bluetooth connections

• Check that you have activated a Bluetooth connection in both devices.
• Check that Nokia 9300 Bluetooth is listed in Phone and Modem Options (Start Phone and Modem Options). See “Installing your device as a modem using Bluetooth connectivity” on page 6.
If you are using Bluetooth wireless technology with Nokia PC Suite and a modem and experience problems, do the following:
• Check that you have paired your device and your computer.
• Activate Dial-up networking in your Bluetooth Neighbourhood by double-clicking the Dial-up networking icon.
• Reinstall the modem using Bluetooth connectivity. See “Installing your device as a modem using Bluetooth connectivity” on page 6.
SettingsControl Panel
If this does not work, disable Bluetooth connectivity from the Nokia PC Suite in the following way:
• Open Nokia PC Suite.
• Double-click Manage connections.
•In Nokia Connection Manager, clear the Bluetooth checkbox, and click OK.

Data cable connections

• Check that you are using a DKU-2 cable.
• Check that Nokia 9300 USB is listed in Phone and Modem Options (StartSettingsControl Panel Phone and Modem Options). See “Installing the cable modem” on page 12.
• Check that the value of the Data cable mode field is PC
Suite connection. (Press Desk, and select Tools panelConnectionsCable setup.)
If you have connected your Nokia 9300 to your computer with a data cable before installing the Nokia Connectivity Cable driver or Nokia PC Suite 6.4, you may have to do following:
1 Connect your device and computer with the data
cable.
2 Select Start Settings Control Panel
System
Hardware Device Manager.
Copyright © 2004 Nokia. All rights reserved.
Control
Troubleshooting
23
Page 24
3 Select your Nokia 9300 from Other device s, and select
Action Uninstall.
4 Unplug your device from your computer, and install
the Nokia Connectivity Cable driver or Nokia PC Suite
6.4 according the instructions.

Infrared connections

Troubleshooting
• Check that you have activated the modem infrared connection on your device. See “Activating the infrared modem” on page 17.
• Check that the infrared ports of your computer and your device are face-to-face and that there are no obstacles blocking the connection.
• Check that the infrared port connection is enabled on your computer (Start SystemHardwareDevice Manager).
• Check that the infrared port connection is enabled in the BIOS settings of your computer.
SettingsControl Panel
24
Copyright © 2004 Nokia. All rights reserved.
Loading...