
Nokia Charger via USB port (CA-100)
ENGLISH
The charger allows you to charge your Nokia device battery through the
USB port of a compatible computer.
Read this user guide carefully before using the charger. Also read the user
guide for your Nokia device, which provides important safety and
maintenance information, and the user guides for your computer and
operating system. Check www.nokia.com/support or your local Nokia
website for the latest version of the user guide and additional
information.
The charger plug can be inserted into a 2.0-mm charger connector of a
compatible Nokia device.
To charge the battery of your Nokia device from your computer, remove
the cap from the top of the charger, plug the charger into the USB port
on your computer as instructed in the user guides for your computer and
operating system, and insert the charger plug into the charge r connector
on the Nokia device. Ensure that the computer is turned on. If the battery
9254175/1

of the Nokia device is empty, it may take several minutes before charging
starts. If the computer enters the stand-by or hibernation mode during
charging, charging may stop. After charging, unplug the charger plug
from the Nokia device. Charging the device battery from the computer
increases the demand on computer battery power and reduces the ba ttery
life.
To unplug the charger from the computer, proceed as instructed in the
user guides for your computer and operating system.
ENGLISH
Care and maintenance
Your device is a product of superior design and craftsmanship and should
be treated with care. The following suggestions will help you protect your
warranty coverage.
• Keep all accessories and enhancements out of the reach of small
children.

• Keep the device dry. Precipitation, humidity, and all types of liquids
or moisture can contain minerals that will corrode electronic
circuits. If your device does get wet, allow it to dry completely.
• Do not use or store the device in dusty, dirty areas. Its electronic
components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten
the life of electronic devices and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its
normal temperature, moisture can form inside the device and
damage electronic circuit boards.
• Do not drop, knock, or shake the device. Rough handling can break
internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents
to clean the device.
• Do not paint the device. Paint can prevent proper operation.
ENGLISH

If the product is not working properly, take it to the nearest authorized
service facility for service.
The crossed-out wheeled bin means that within the European
Union the product must be taken to separate collection at the
product end-of-life. Do not dispose of these products as
unsorted municipal waste. For more information, see product
Eco-Declaration or country specific information at
www.nokia.com.
© 2006 Nokia. All rights reserved.
ENGLISH