Nokia 9232254 User Manual

Nokia HS-4W Wireless Boom Headset User Guide

9232254

Version 1A

DECLARATION OF CONFORMITY

We, NOKIA CORPORATION declare under our sole responsibility that the product HS-4W is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity

document in any form without the prior written permission of Nokia is prohibited. Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other

product and company names mentioned herein may be trademarks or tradenames of their respective owners.

Bluetooth is a registered trademark of Bluetooth SIG, Inc. The information contained in this user guide was written for the Wireless Boom Headset

HS-4W. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

In some countries there may be restrictions in using Bluetooth devices. Check with your local authorities.

EXPORT CONTROLS

This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.

Contents

1. Introduction .................................................................................... 5

Overview.................................................................................................................................. 5

Bluetooth wireless technology.......................................................................................... 5

Bluetooth passcode.............................................................................................................. 6

2. Get started....................................................................................... 7

Overview.................................................................................................................................. 7

Chargers and batteries ........................................................................................................ 8

Charge the battery ............................................................................................................... 9

When the battery charge falls low ............................................................................ 9

Pair the headset with a compatible phone ................................................................. 10

Disconnect the headset from the phone............................................................... 11

Reconnect the paired headset to the compatible phone ................................. 11

Troubleshooting................................................................................................................... 11

3. Use the headset............................................................................. 13

Switch the headset on or off........................................................................................... 13

Wear the headset......................................................................................................... 13

Call functions................................................................................................................ 14

Adjust the earphone volume ........................................................................................... 15

Switch calls between the phone and headset............................................................ 15

Use the headset with several paired phones .............................................................. 16

Reset the headset ............................................................................................................... 16

4. Battery information ...................................................................... 17

Charge and Discharge........................................................................................................ 17

Care and Maintenance ...................................................................... 19

FCC Notice........................................................................................... 20

Introduction

1. Introduction

■Overview

The Nokia HS-4W Wireless Boom Headset can be connected to a compatible phone that supports Bluetooth technology. This allows you freedom to make and receive calls while on the move or in the office.

Read this user guide carefully before using the headset. In addition to this user guide, read your phone’s user guide, which provides important safety and maintenance information.

Keep the headset out of reach of small children.

■Bluetooth wireless technology

The headset is specially designed for compatible Nokia phones that support Bluetooth technology. The headset can, however, be used with any compatible Bluetooth devices that support the compatible Handsfree or Headset profiles. (A profile is a set of Bluetooth commands that the phone uses to control the headset).

The Bluetooth technology makes it possible to connect compatible communication devices without using cables. A Bluetooth connection does not require that the phone and the headset be in line of sight, but both devices should be within 30 feet (10 metres) of each other. Connections can be subject to interference from obstructions, such as walls, or other electronic devices.

This headset is compliant with and adopts the Bluetooth Specification 1.1. However, interoperability between the headset and other products with Bluetooth connectivity is not guaranteed because it depends on compatibility.

Introduction

For more information on the compatibility between this headset and other products, please check with your dealer.

■Bluetooth passcode

You need a Bluetooth passcode for pairing the headset with a compatible phone. The passcode is

0000

Get started

2. Get started

■Overview

Note: The use of wireless devices may be restricted in some situations.

Observe any restrictions and obey all signs and instructions concerning use of wireless devices.

The headset contains the following parts, as shown in Figure 1:

1. Power key: Switches the headset on and off, or mutes the ongoing call

2. Speaker: Relays the caller’s voice.

Get started

3. Indicator light: Displays the current status of the headset. The indicator light

can be yellow, green or red. If the light is yellow, a Bluetooth connection is

active. The green and red lights indicate the status of a call and charging.

4. Volume control key: Increases/decreases the earphone volume during a call.

5. Microphone: Picks up your voice.

6. Answer/end key: Answers or ends the call. This key can also be used for voice

dialling, redialling and switching an active call between the headset and the

compatible phone.

7. Charger connector

Before you can start using the headset, you must:

• Charge the battery

• Pair a compatible phone with the headset

■Chargers and batteries

Warning: Use only batteries and chargers approved by Nokia for use

with this particular enhancement. The use of any other types will invalidate any approval or warranty applying to the enhancement, and may be dangerous.

Check the model number of any charger before using it with this device. The headset is intended for use with the following Nokia chargers: AC-1, ACP-7, ACP-8, ACP-9, ACP-12, and LCH-12.

For availability of approved batteries and chargers, check with your local dealer.

When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

Get started

■Charge the battery

1. Open the flap and connect the charger cable to the headset as shown in Figure

2. Connect the charger to an AC wall outlet. The red indicator light is displayed during charging. Charging the battery fully may take up to 2hours 45 minutes depending on the charger.

3. When the battery is fully charged, the green indicator light is displayed. Disconnect the charger from the AC wall outlet and the headset.

When the battery charge falls low

Fully charged batteries last up to 6 hours of talk-time or up to 160 hours of standby time. (In standby mode the headset is switched on but no call is in progress.)

Get started

When the battery is running out of power, the headset beeps. Charge the battery as described above.

■Pair the headset with a compatible phone

1. Make sure that the compatible phone is switched on and the headset is charged.

2. Switch on the headset.

3. Activate the Bluetooth connection from the phone. For more information, see the user guide of the phone.

4. Set the phone to search for Bluetooth devices as instructed in the user guide of the phone.

5. Select the Nokia HS-4W from the list.

6. Enter the generic passcode 0000 to associate ("pair") and connect the headset to the phone.

Once you have entered the passcode, the phone becomes the default phone for the headset, if the headset has not been previously paired with another phone.

’Use the headset with several paired phones, ’ p. 16.

See

The headset beeps once and an active Bluetooth connection is displayed by a blinking yellow indicator light. The headset should now appear in the phone menu where you can view the Bluetooth devices that are currently paired with the compatible phone.

7. Start using the headset (see p. 13).

Get started

Disconnect the headset from the phone

The headset can be disconnected from the phone, if you want to use another Bluetooth device with it. You can disconnect the headset in the following ways:

• Switch off the headset. OR:

• Disconnect the headset in the phone’s Bluetooth menu. OR:

• Move the headset more than 30 feet (10 metres) away from the phone.

The headset is also disconnected if the battery of the headset or the phone becomes flat.

Note that you do not need to delete the pairing with the headset to disconnect it. When you reconnect a paired headset, you are not asked for its passcode.

Reconnect the paired headset to the compatible phone

To reconnect the headset to the default phone or the last phone used, switch on the headset. Otherwise, make the connection in the phone’s Bluetooth menu as instructed in the user guide of the phone.

Note that switching on the headset creates the connection automatically only if you have set the phone to accept Bluetooth connection requests without your permission. In Nokia phones this can be done by changing your paired devices settings in the Bluetooth menu.

■Troubleshooting

If you cannot connect the headset to the compatible phone, proceed as follows:

• Make sure that the Bluetooth feature is activated on the compatible phone.

Get started

• Make sure that the headset is switched on and paired with the compatible phone.

• Make sure that you have disconnected the previous Bluetooth connection from the phone.

• Check that the headset is within 30 feet (10 metres) of the phone and that there are no obstructions, such as walls, or other electronic devices between the headset and the phone.

• Make sure the pairing information list of the headset is not full. The headset can store the information of up to 8 phones at a time. If the list becomes full, reset the headset to the original settings. See

’Reset the headset, ’ p. 16.

• Press and hold the answer/end key if the headset does not automatically reconnect to the default or last used phone.

Use the headset

3. Use the headset

■Switch the headset on or off

Note: The use of wireless devices may be restricted in some situations.

Observe any restrictions and obey all signs and instructions concerning use of wireless devices.

Switch on the headset: press and hold the power key for 2 seconds. The headset beeps and the green indicator light starts blinking. The indicator light changes to yellow when the headset is connected to a compatible phone.

Switch off the headset: press and hold the power key for 2 seconds when no call is in progress. The headset beeps and the red indicator light is displayed briefly.

Wear the headset

Slide the headset onto your ear as shown in Figure 3.

Use the headset

Call functions

When the headset is connected to the phone, make a call by using the phone in the normal way. Note that the call functions depend on the phone that you use.

Answer and end a call

When you receive a call, you hear a ringing tone through the headset. Press the answer/end key to answer the call or to end the currently active call.

You can also answer or end the call using the phone.

Answer automatically

If the phone’s automatic answer function is set to on, the phone automatically answers the incoming call after one ring and forwards it to the headset.

Use the headset

Reject a call

When you receive an incoming call that you do not want to answer, briefly press the

answer/end key twice.

Redial the last dialed number

Press the answer/end key twice briefly when no call is in progress.

Mute an ongoing call

You can mute or unmute the ongoing call by pressing the power key briefly.

Dial by voice

When no call is in progress, press and hold the answer/end key until you hear a tone that indicates that you can say the desired name ("voice tag"). Say the voice tag. The phone plays the voice tag and dials the related phone number.

You can also activate voice dialing with the phone. For details on voice dialing, see the phone’s user guide. Note that this function is only available if the phone supports voice dialing.

■Adjust the earphone volume

Press the volume control key to increase or decrease the volume.

■Switch calls between the phone and headset

You can switch active calls between the headset and a compatible device. To switch the calls from the headset to a phone and vice versa, press and hold the

answer/end key or use the respective function in your phone.

Use the headset

■Use the headset with several paired phones

Before the headset can be used, the compatible phone has to be paired with the headset. The headset can be paired with up to 8 compatible phones but connected to only one phone at a time.

The phone that was first paired with the headset is called the "default phone". The phone that was last used with the headset is called the "last used phone".

If the headset is switched on within 30 feet (10 metres) of several paired phones, the headset will try to connect to the "default phone" within a few seconds.

If the headset cannot connect to the "default phone" (for example, it is switched off or its user rejects the connection), the headset tries to connect to the "last used phone" within a few seconds.

If the headset does not automatically connect to the default or last used phone, press and hold the

If the headset cannot connect to either of the compatible phones, it remains discoverable for other phones for approximately 10 minutes, which is displayed by the blinking green indicator light.

If you want to use the headset with a paired phone that is not a "default phone" or "last used phone", make the connection in the phone’s Bluetooth menu.

answer/end key.

■Reset the headset

You can reset the headset to its original settings, for example, to change the default user of the headset. Resetting the headset clears all of its settings, including pairing information. To reset the headset:

Press and hold the power key and the upper end of the volume control key for 10 seconds. After the headset has been reset, it beeps twice and the red and the green indicator lights alternate for several seconds.

Battery information

4. Battery information

Your headset is powered by a rechargeable battery. Take good care of the battery and follow the guidelines below.

■Charge and Discharge

The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk time and standby time) is noticeably shorter than normal, contact your nearest qualified service facility.

Use only batteries approved by the manufacturer and recharge your battery only with the chargers approved by the manufacturer. Unplug the charger when not in use. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its lifetime. If left unused a fully charged battery will discharge itself over time.

Temperature extremes can affect the ability of your battery to charge.

Use the battery only for its intended purpose.

Never use any charger or battery that is damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object (coin, clip or pen) causes direct connection of the + and - terminals of the battery (metal strips on the battery), for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59° F and 77° F). A headset with a hot

Battery information

or cold battery may temporarily not work, even when the battery is fully charged. Batteries' performance is particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire!

Discard batteries according to local regulations (e.g. recycling). Do not dispose as household waste.

Care and Maintenance

Your headset is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfil any warranty obligations and to enjoy this product for many years.

• Keep all accessories out of the reach of small children.

• Keep the headset dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits.

• Do not use or store the headset in dusty, dirty areas. Its moving parts can be damaged.

• Do not attempt to open the headset. Non-expert handling may damage it.

• Do not drop, knock or shake the headset. Rough handling can break internal circuit boards.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the headset.

• Do not paint the headset. Paint can clog the moving parts and prevent proper operation.

FCC Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference; and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Guía del Usuario Equipo Auricular Inalámbrico Compacto (HS-4W)

9232254

Edición Nº 1a

DECLARACIÓN DE CONFORMIDAD

Nosotros, NOKIA CORPORATION, declaramos bajo nuestra sola responsabilidad que el producto HS-4W cumple en conformidad con las provisiones del Consejo Directivo: 1999/5/EC. Se puede encontrar una copia de esta Declaración de conformidad en http://www.nokia.com/phones/declaration_of_conformity

de este documento en ninguna forma sin previo permiso escrito de parte de Nokia. Nokia y Nokia Connecting People son marcas registradas de Nokia Corporation. Otros

nombres de productos y compañías aquí mencionados podrían ser marcas o nombres, registrados o no, de sus respectivos propietarios.

Bluetooth es marca registrada de Bluetooth SIG, Inc. La información contenida en esta guía del usuario fue escrita para el Equipo Auricular

Inalámbrico Compacto HS-4W. Nokia opera bajo un sistema de desarrollo continuo. Nokia se reserva el derecho de hacer cambios y mejoras en cualquier producto descrito en esta guía sin previo aviso.

Bajo ningún concepto Nokia será responsable por cualquier pérdida de datos o ganancias o por cualquier otro daño especial o incidental, por cualquier causa directa o indirecta.

El contenido de este documento está provisto "tal cual". Además de las exigidas por las leyes, no se emite ninguna otra garantía de ningún tipo, sea expresa o implícita, incluyendo, pero sin limitarse a, garantías implícitas de mercadeo y de capacidad para un propósito particular, en cuanto a la precisión, fiabilidad o contenido de este documento. Nokia se reserva el derecho de revisar este documento o retirarlo en cualquier momento sin previo aviso.

La disponibilidad de ciertos productos y servicios podrían variar por región. Consulte con su distribuidor local de Nokia.

Algunos países pueden prohibir el uso de los dispositivos Bluetooth. Consulte con sus autoridades locales.

CONTROL DE EXPORTACIONES

Este dispositivo podría contener bienes, tecnología o software sujeto a leyes y regulaciones de exportación de los Estados Unidos y otros países. Se prohibe su desvío contraviniendo las leyes.

AVISO FCC/INDUSTRIA CANADIENSE

Este aparato cumple con la sección 15 de los reglamentos de la FCC. Su funcionamiento está sujeto a estas dos condiciones: (1) este dispositivo no podría causar interferencia peligrosa, y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluso interferencias que podrían causar su funcionamiento no deseado.

Contenido

1. Introducción ..................................................................................... 5

Resumen.................................................................................................................................. 5

Tecnología Inalámbrica Bluetooth................................................................................... 5

Contraseña Bluetooth.......................................................................................................... 6

2. Para empezar .................................................................................... 7

Resumen.................................................................................................................................. 7

Cargadores y baterías .......................................................................................................... 8

Cargar la batería ................................................................................................................... 9

Cuando se baja la carga de batería ........................................................................ 10

Vincular el equipo auricular con un teléfono compatible....................................... 10

Desconectar el equipo auricular del teléfono...................................................... 11

Reconexión del equipo auricular vinculado a un teléfono compatible ........ 11

Detección de averías.......................................................................................................... 12

3. Empleo del equipo auricular ......................................................... 13

Encender y apagar el equipo auricular ......................................................................... 13

Empleo del equipo auricular..................................................................................... 13

Funciones de llamada ................................................................................................. 14

Ajustar el volumen del auricular .................................................................................... 15

Intercambiar las llamadas entre el teléfono y el equipo auricular....................... 16

Uso del equipo auricular con diferentes teléfonos vinculados .............................. 16

Reconfigurar el equipo auricular.................................................................................... 17

4. Información sobre las baterías...................................................... 18

Carga y descarga................................................................................................................. 18

Cuidado y mantenimiento................................................................. 20

Aviso de la FCC .................................................................................. 21

Introducción

1. Introducción

■ Resumen

El Equipo Auricular Inalámbrico Compacto HS-4W puede ser conectado a un teléfono compatible que respalde la tecnología Bluetooth. Esto facilita el hacer y recibir llamadas en tránsito o en la oficina.

Lea detenidamente esta guía del usuario antes de usar el equipo auricular. Además de la guía del usuario del Equipo Auricular Inalámbrico Compacto HS-4W, el manual del usuario del teléfono también provee información importante sobre el cuidado y mantenimiento.

Mantenga el equipo auricular fuera del alcance de los niños.

■ Tecnología Inalámbrica Bluetooth

El Equipo Auricular Inalámbrico Compacto HS-4W está especialmente diseñado para teléfonos Nokia compatibles que respalden la tecnología Bluetooth. Sin embargo, el equipo auricular puede ser utilizado con cualquier dispositivo Bluetooth compatible que respalde los perfiles Manos libres o Equipo Auricular. (El perfil es un conjunto de comandos Bluetooth que el teléfono utiliza para controlar el equipo auricular).

La tecnología Bluetooth hace posible la conexión entre dispositivos compatibles de comunicación sin usar cables. Una conexión Bluetooth no requiere que el teléfono y el equipo auricular estén alineados, pero si que se mantenga una distancia de 10 metros (30 pies) entre los dos dispositivos. Las conexiones pueden estar sujetas a interferencias causadas por obstrucciones, tales como las paredes u otros dispositivos electrónicos.

Introducción

El Equipo Auricular Inalámbrico Compacto HS-4W es compatible con la Especificación Bluetooth 1.1. Sin embargo, el interfuncionamiento entre el Equipo Auricular Inalámbrico Compacto HS-4W y otros productos vía la conexión Bluetooth depende de la compatibilidad por lo que no se puede garantizar.

Para más información sobre la compatibilidad entre el Equipo Auricular Inalámbrico Compacto HS-4W con otros productos, por favor contacte a su distribuidor.

■ Contraseña Bluetooth

Se necesita una contraseña Bluetooth para vincular el equipo auricular con un teléfono compatible. La contraseña es 0000.

+ 60 hidden pages