Operating within the voltage range 90 V...264 V AC (50 Hz...60 Hz), the Fast
Travel Charger is practically current independent in normal office and household use. Like the standard charger, it is compatible with all battery options and
is available for different wall sockets.
The Fast Travel Charger can also be used with basic stand and desktop stand.
Fast Travel Charger
Fast Travel Charger (Chinese plug) 90-264 VacACP-9C0675204
Fast Travel Charger
Fast Travel Charger (Australia) 90-264 VacACP-9A0675152
3.5 mm DC plug, 3-pole (+, -, control)
output current limiting, max. 850 mA
output voltage limiting, max. 9.3 V (unloaded)
Output voltage/current (typ):
Weight approx. with cable
ACP-9X
ACP-9A
8.4 V / 800 mA
100 g
Page 12 – 6
Issue 1 06/01
Page 7
PAMS
RAE-3
Technical Documentation
Data Cable DLR-2
RS-232 Data cable DLR-2 to be used for PC connectivity and fax mode. Connected between PC serial port and transceiver system connector.
Product Code
Data Cable DLR-2:0730132
View of DLR-2
12. Accessories
Issue 1 06/01
Page 12 – 7
Page 8
RAE-3
PAMS
12. Accessories
Memory Card DTS-16
The PDA includes a synchronous serial interface that is compatible with the
Multimedia Card Bus (MMC) Protocol. The MMC is a changeable Flash or
ROM memory card with variable memory size, DTS-16 memory capacity is
16Mbytes The MMC connector is located on the BS8 Module.
Note: The same part is used for RAE-2 communicator. The media is electrically
and mechanically compatible. However the data format is different.
RAE-3 is compatible with 4MByte and 8MByte cards also.
Product Code
Memory Card DTS-16:0271658
View of DTS-16
Technical Documentation
1234567
24mm
32mm
1.5mm
Page 12 – 8
Issue 1 06/01
Page 9
PAMS
RAE-3
Technical Documentation
Portable Accessories
Audio Headset HDC-8L
The audio headset can be used for normal voice calls instead of the PC audio.
Product Code
Headset HDC-8L
View of HDC-9
12. Accessories
0271368
Issue 1 06/01
Page 12 – 9
Page 10
RAE-3
PAMS
12. Accessories
Mobile Charger LCH-9
Charging adapter for car environment;
Input voltage 9...32 V
Output voltage 7.8 V /+1.4V/–1.0V)
Charger typeSwitching mode power supply
Operationquick charge (< 0.5-2.5 h), trickle charge
Protectioninput fused, output current limit
Green LED indicating input voltage on
WeightAppx. 78g
Product Code
Technical Documentation
Portable charger LCH-90675005
View of LCH-9
Page 12 – 10
Issue 1 06/01
Page 11
PAMS
RAE-3
Technical Documentation
Belt Clip BCH-17
Used to carry the phone on belt. Installation Belt clip is fixed to belt. The counterpiece is fixed to B cover of the transceiver. The belt part is equipped with a
latch to ensure firm retention and easy removal.
Product Code
Belt Clip BCH-17:0271664
View of BCH-17
12. Accessories
Issue 1 06/01
Page 12 – 11
Page 12
RAE-3
PAMS
12. Accessories
Carry Case CBR-44
Used to carry the phone on belt.
Product Code
Carry Case CBR-440720262. . . . . . . .
View of CBR-44
Technical Documentation
Page 12 – 12
Issue 1 06/01
Page 13
PAMS
RAE-3
Technical Documentation
Office Use Accessories
Desktop Stand DCH-10
The desktop stand DCH-10 is designed for calendar data synchronization between a PC and a Communicator with a button press.
The front slot holds and charges the phone, and the rear slot holds and
charges a spare battery.
The desk stand includes red and green LEDs to show the status of the spare
battery charging in the rear slot.
The desk stand supports charging of 4.1V and 4.2V lithium-ion batteries.
The desk stand is powered by an external ACP-9 type charger.
12. Accessories
When a RAE-3 is placed in the front slot it is charged at the same rate as if the
external charger was connected directly to the phone. When a spare BLL-3
battery is placed in the rear slot, it is charged at a slower rate. Charging of the
spare battery is delayed until the phone has finished charging.
The front slot provides data connection between the deskstand connected PC
and the RAE-3. The host PC is connected by Nokia data cable to the rear of the
desk stand. The PC must have the Nokia ”Share” software running for the data
transfer to the PC to be successful.
Product Code
Desktop stand DCH-100675209
Desktop stand DCH-10 (chinese variant)0675222
View of DCH-10
Issue 1 06/01
Page 12 – 13
Page 14
RAE-3
PAMS
12. Accessories
Fast Travel Charger ACP-9
Identical with the item in the basic sales package.
Data Cable DLR-2L
Identical with the item in the basic sales package.
Technical Documentation
Page 12 – 14
Issue 1 06/01
Page 15
PAMS
RAE-3
Technical Documentation
12. Accessories
Advanced Handsfree Car Installation Kit CARK109
HHS-13
MKU-1
CRM-1
HFU–2
PCH–4J
AMD-2
HFS–12
HFM-8
HSU-1
Item:Accessory:Type Product code:
1Active Car CradleCRM-1 0630220
The holder for the mobile phone is attached to the vehicle’s interior in a convenient position using the swivel mount HHS-13. The mounting is secured with a
screw (included with HHS-13).
The cable with the plug-in connector from CRM-1 connects to the PHONE
socket in HFU-2. (The other cable from CRM-1 connects to the external antenna.)
Product Code
Active Car Holder CRM-10630220
View of CRM-1
Technical Documentation
Page 12 – 16
Issue 1 06/01
Page 17
PAMS
RAE-3
Technical Documentation
Swivel Mount HHS-13
HHS-13 offers two installation methods for the holder CRM-1. Either use all
components to make a swivel mount, or use the flat mounting plate for a fixed
position.
Product Code
Swivel Mount HHS-130620055
View of HHS-13
12. Accessories
Mounting plate MKU-1
The handsfree unit HFU-2 can be attached to the vehicle interior using the
mounting plate MKU-1.
Product Code
Mounting plate MKU-10620036
Issue 1 06/01
Page 12 – 17
Page 18
RAE-3
PAMS
12. Accessories
Advanced HF Unit HFU-2
The handsfree unit HFU-2 enables the phone to operate in handsfree mode
and it is attached to the vehicle interior using the mounting plate MKU-1.
Product Code
Advanced HF Unit HFU-20694049
View of HFU-2
Technical Documentation
Page 12 – 18
Issue 1 06/01
Page 19
PAMS
RAE-3
Technical Documentation
Power Cable PCH-4J
The power cable connects to the DC socket in HFU-2 and to the vehicle’s power supply. See section ”Installation” for more information.
Product Code
Power Cable PCH-4J0730055
View of PCH-4J
12. Accessories
Handsfree Microphone HFM-8
The microphone connects to the MIC socket in HFU-2. Twist the plug clockwise
to lock firmly in place.
Product Code
Power Cable HFM-80690016
View of HFM-8
)LJXUH+DQGVIUHHPLFURSKRQH+)0
Issue 1 06/01
Page 12 – 19
Page 20
RAE-3
PAMS
12. Accessories
External HF Speaker HFS-12
The external HF speaker connects to the SPEAKER socket in HFU-2. Twist the
plug clockwise to lock firmly in place.
Product Code
External HF speaker HFS-120692008
View of HFS-12
Technical Documentation
Handset HSU-1 (not included)
The handset HSU-1 offers more privacy during a call. It connects to the DATA/
HANDSET socket in HFU-2. For more information, please refer to the user
guide for the handset.
Product Code
Handset HSU-1 0640047
View of HSU-1
Page 12 – 20
Issue 1 06/01
Page 21
PAMS
RAE-3
Technical Documentation
12. Accessories
Antenna Set NMT/GSM 900/1800 AMD-2 (not included)
Upgrade kit CARK110
CARK99 installation kit can be upgraded to CARK109 installation kit with upgrade car kit CARK110.
CARK110 comprises the following items:
Active Car Cradle CRM-1
Swivel Mount HHS-13
User Guide
Issue 1 06/01
Page 12 – 21
Page 22
RAE-3
PAMS
12. Accessories
Technical Documentation
This page intentionally left blank.
Page 12 – 22
Issue 1 06/01
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.