Nokia 34003800FM20 User Manual

Download

Nokia FastMile Outdoor Unit User Manual

FastMile

Nokia FastMile Outdoor Unit User Manual

3TG-00088-AAAA-TCZZA Issue: 01P03 October 2018

Nokia — Proprietary and confiden tial Use pursuan t to applicable agreements

Nokia FastMile Outdoor Unit User Manual

Nokia is a registered trademark of Nok ia Corpor ation. Other pr oduct s and company names mentioned herein may be trademarks or tradenames of their respective owners.

The information presented is subject t o change without notice. No responsibility is assumed for inaccuracies contained herein.

not be made available to, or copied or used by anyone outside Nokia without its written authorization. Not to be used or disclosed except in accordance with applicable agreements.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Preface

1 Preface

This preface provides general information about the user manual for the Nokia FastMile Outdoor Unit.

1.1 Scope

This document provides an overview of the Nokia FastMile Outdoor Unit along with information about safet y, install ing, and troubl eshooting t he Nokia Fast Mile Outdoor Unit.

1.2 Audience

This document is intended fo r planners, administ rators, operators, and mai ntenance personnel involved in installing, upgrading, or maintainin g the Nokia Fast Mile Outdoor Unit.

Table 1 provides a summary of how the main content of this manual is organized.

Table 1 Main content of manual

Chapter number

This chapter

5 Overview Brief overview of the Nokia FastMile Outdoor Unit 6 Installation Detailed installation steps for the Nokia FastMile Outdoor Unit 7 Troubleshooting Resolutions for problems that might be faced during installation

Chapter content Description

Document preface Defines the purpose, scope, and intended audience of this

document; explains how information is organized in this document

1.3 Required knowledge

The reader must be familiar with general telecommunications principles.

1.4 Acronym s and initialisms

The expansions and optional descriptions of most acronyms and initialisms used in this document appear in the glossary at the back of the document.

Issue: 01P03 3TG-00088-AAAA-TCZZA 3

Preface

Nokia FastMile Outdoor Unit User Manual

1.5 Assistance and ordering phone numbers

Nokia provides global technical support through regional call centers. Phone numbers for the regional call centers are available at the following URL: http://support.alcatel-lucent.com.

For ordering information, contact your Nokia sales representative.

1.6 Nokia quality processes

Nokia’s FastMile Outdoor Unit quality practices are in compliance with TL 9000 requirements.These requirements are docume nted in the Fixed Networks Quality Manual 3FQ-30146-6000-QRZZA. The quality practices adequately ensure that technical requirements and cus tomer end-point requirements are met. The customer or its representatives may be allowed to perform on-site quality surveillance audits, as agreed upon during contract negotiations.

1.7 Safety information

For safety information, see the appropriate safety guideline chapters.

1.8 Documents

Documents are available from Nokia using ALED or OLCS.

Procedure 1 To download a ZIP file package of the customer documentation

1 Navigate to http://support.alcatel-lucent.com and enter your user name and password. If you

are a new user and require access to this service, please contact your Nokia sales representative.

2 From the Technical Content for drop-down menu, choose the product.

3 Click on Downloads: Electronic Delivery.

4 Choose Documentation from the drop-down menu and click Next.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Preface

5 Select the image from the drop-down menu and click Next.

6 Follow the on-screen directions to download the file.

Procedure 2 To access individual documents

Individual PDFs of customer documents are also accessible through the Nokia Customer Support website.

1 Navigate to http://support.alcatel-lucent.com and enter your user name and password. If you

are a new user and require access to this service, please contact your Nokia sales representative.

2 From the Technical Content for drop-down menu, choose the product.

3 Click on Manuals and Guides to display a list of customer documents by title and part

number. You can filter this list using the Release drop-down menu.

4 Click on the PDF to open or save the file.

1.9 Special information

The following are examples of how special inf ormation is presented in this document.

Danger — Danger indicates that the descri bed activity or

situation may result in serious personal injury or death; for example, high voltage or electric shock hazards.

Warning — Warning indicates that the described acti vity or

situation may, or will, cause equipment damage or serious performance problems.

Caution — Caution indicates that the described activi ty or

situation may, or will, cause service interruption.

Issue: 01P03 3TG-00088-AAAA-TCZZA 5

Preface

Note — A note provides information that is, or may be, of

special interest.

1.9.1 Steps with options or substeps

When there are options in a step, they are identi fied by letters. When there are required substeps in a step, they are identified by roman numerals.

Procedure 3 Example of options in a step

At step 1, you must choose option a or b.

1 This step offers two options. You must choose one of the following:

a This is one option.

Nokia FastMile Outdoor Unit User Manual

b This is another option.

2 You must perform this step.

Procedure 4 Example of required substeps in a step

At step 1, you must perform a series of substeps within the step.

1 This step has a series of substeps that you must perform to complete the step. You must

perform the following substeps:

i This is the first substep. ii This is the second substep. iii This is the third substep.

2 You must perform this step.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Preface

1.10 Multiple PDF document search

You can use Adobe Reader Release 6.0 and later to search multiple PDF files for a common term. Adobe Reader displays the results in a single displ ay panel. The results are grouped by PDF file, and you can expand the entry for each file.

Note — The PDF files in which you search must be in the same

folder.

Procedure 5 To search multiple PDF files for a common term

1 Open Adobe Acrobat Reader.

2 Choose Edit→Search from the Acrobat Reader main menu. The Search PDF panel appears.

3 Enter the search criteria.

4 Click on the All PDF Documents In radio button.

5 Select the folder in which to search using the drop-down menu.

6 Click on the Search button.

Acrobat Reader displays the search results. You can expand the entries for each document by clicking on the + symbol.

Issue: 01P03 3TG-00088-AAAA-TCZZA 7

Nokia FastMile Outdoor Unit User Manual ETSI environmental and CRoHS guidelines

2 ETSI environmental and CRoHS

guidelines

This chapter provides i nformation about the ETSI env ironmental China Restri ction of Hazardous Substances (CRoHS) regulations that govern the installation and operation of Nokia FastMile Outdoor Unit equipment. This chapter also includes environmental operation parameters of general interest.

2.1 Environmental labels

This section describes the environmental instructions that are provided with the customer documentation, equipment, and location where the equipment resides.

2.1.1 Overview

CRoHS is applicable to Electronic Information Products (EIP) manufactured or sol d and imported in the territory of the mainland of the People’s Republic of China. EIP refers to products and their accessories manufactured by using electronic information technology, includi ng electronic communications products and such subcomponents as batteries and cables.

2.1.2 Environmental rel ated labels

Environmental labels are located on appropri ate equipment. The following are sample labels.

2.1.2.1 Products below Maximum Concentration Value (MCV) label

Figure 1 shows the label that indicates a product is below the maximum concentration value, as defined by standard SJ/T11363-2006 (Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products). Products with this labe l are recyclable. The label may be found in this documentation or on the product.

Issue: 01P03 3TG-00088-AAAA-TCZZA 9

ETSI environmental and CRoHS guidelines

18986

Figure 1 Products below MCV value label

Nokia FastMile Outdoor Unit User Manual

2.1.2.2 Products containing hazardous substances above Maximum Concentration Value (MCV) label

Figure 2 shows the label that indicates a product is above the maximum concentration value, as defined by standard SJ/T11363-2006 (Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products). The number conta ined inside the label i ndicates the Environment-Friendly User Period (EFUP) value. The label may be found in this documentation or on the product.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual ETSI environmental and CRoHS guidelines

18985

Figure 2 Products above MCV value label

Together with major int ernational telecommuni cations equi pment companies, Nokia has determined it is appropriate to use an EFUP of 50 years for network infrastructure equipment and an EFUP of 20 years for handsets and accessories. These values are based on manufacturers' extensive practical experience of the design, manufacturing, maintenance, usage conditions, operating environments, and physical condition of infrastructure and handsets after years of service. The values reflect minimum values and refer to products operated according to the intended use conditions. See “Hazardous Substances Table (HST)” for more information.

2.2 Hazardous Substances Table (HST)

This section describes the compliance of the Nokia FastMile Outdoor Unit equipment to the CRoHS standard when the product and subassemblies contain hazardous substances beyond th e MCV value. This infor mation is found i n this user documentation where part numbers for the produ ct and suba ssemblies are listed. It may be referenced in other documentation that describes the Nokia FastMile Outdoor Unit equipment.

In accordance with the People’s Republic of China Electronic Indu stry Standard Marking for the Control of Pollution Caused by Electronic Information Products (SJ/T11364-2006), customers may access th e Nokia Hazardous Substance Table, in Chinese, from the following location:

• http://www.alcatel-sbell.com.cn/wwwroot/images/upload/private/1/media/ChinaRo

HS.pdf

Issue: 01P03 3TG-00088-AAAA-TCZZA 11

ETSI environmental and CRoHS guidelines

2.3 Other environmental requiremen ts

Observe the following environmental requirements when handling Nokia FastMile Outdoor Unit equipment.

2.3.1 Environmental requirement s

See chapter 9 in this guide for more information about temperature ranges for the Nokia FastMile Outdoor Unit equipment and other Nokia FastMile Outdoo r Unit specifications.

2.3.2 Storage

According to ETS 300-019-1-1 - Class 1.1, storage of Nokia FastMil e Outdoor Unit equipment must be in Class 1.1, weather-protected, temperature-controlled locations.

Nokia FastMile Outdoor Unit User Manual

2.3.3 Transportation

According to EN 300-019-1-2 - Class 2.3, transportation of Nokia FastMile Outdoor Unit equipment must be in packed, public transportation.

2.3.4 Stationa ry use

According to EN 300-019-1-3 - Class 3.1/3.2/3.E, stationary use of Nokia FastMile Outdoor Unit equipment must be in a temperature-control led location, with no rain allowed, and with no condensation allowed.

2.3.5 Thermal limitations

The thermal limitations for the Nokia FastMi le Outdoor Unit equipment are:

• operating temperature (ambient): –30°C to 65°C (–22°F to 149°F)

• operating relative humidity: 5% to 85% relati ve humidity, non-condensing

• short-term relative humidity: 5% to 93% relative humidity, non-condensing

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual ETSI environmental and CRoHS guidelines

2.3.6 Material content compliance

European Union (EU) Directive 2002/95/EC, “Restriction of the use of certain Hazardous Substances” (RoHS), restricts the use of lead, mercury, cadmium, hexavalent chromium, and certain flame retardants in electrical and electronic equipment. This Directive a pplies to electr ical and electroni c products placed on the EU market after 1 July 2006, with various exemptions , including an exemption for lead solder in network infrastructure equipment. Nokia products shipped to the EU after 1 July 2006 comply with the EU RoHS Directive.

Nokia has implemented a material/substance content management proces s. The process is described in: Nokia process for ensuring RoHS Compliance (1AA002660031ASZZA). This ensures compliance with the European Union Directive 2011/65/EU on the Restri ction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS2). With the process equipment is assessed in accordance wit h the Harmonised Standard EN50581 :2012 (CENELEC) on Technical documentation for the assessment of electr ical and electronic products with respect to the restriction of hazardous substances.

2.3.7 End-of-life collection and treatment

Electronic products bearing or referencing the symbol shown in Figure 3, wh en put on the market within the European Union (EU), shall be collec ted and treat ed at the end of their useful life, in compliance wit h applicable EU and local legislation. They shall not be disposed of as part of unsorted municipa l waste. Due to materials that may be contained in the product, such as heavy metals or batteries, t he environment and human health may be negatively impacted as a result of inappr opriat e dispo sal.

Note — In the European Union, a solid bar under the symbol for

a crossed-out wheeled bin i ndicates that the product was put on the market after 13 August 2005.

Figure 3 Recycling/take back/disposal of product symbol

Issue: 01P03 3TG-00088-AAAA-TCZZA 13

ETSI environmental and CRoHS guidelines

At the end of its life, Nokia FastMile Outdoor Un it equipment is subject to the applicable local legislati ons that implement the European Directive 2012/19EU on waste electrical and electroni c equipment (WEEE).

There can be different requirements fo r collection and treatment in different member states of the European Union.

In compliance with legal requirements and contractual agreements, whe re applicable, Nokia will offer to provide for the collection and treatment of Nokia products bearing the logo shown in Figure 3 at the en d of their useful life, or product s displaced by Nokia equipment offers. For information regarding take-back of equipment by Nokia, or for more information regarding the requirements for recycling/disposal of product, contact your Nokia account manager or Nokia take back support at sustainability.global@nokia.com.

2.4 Additional information

See Chapter 10 for RF exposure information.

Nokia FastMile Outdoor Unit User Manual

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual ETSI safety guidelines

3 ETSI safety guidelines

This chapter provides information about the mandat ory regulations that govern the installation and operation of Nokia FastMile Outdoor Unit equipment in the ETSI market.

3.1 Safety instructions

This section describes the safety instructions that are provided in the customer documentation and on the Nokia FastMile Outdoor Unit equipment.

3.1.1 Safety instruction boxes

The safety instruction boxes are provided in the Nokia FastMile Outdoor Unit customer documentation. Observe the instructions to meet safety requirements.

The following is an example of the Danger box.

Danger — Possibility of personal injury.

The Danger box indicates that the described activity or situation may pose a threat to personal safety. It call s a ttenti on to a situat ion or procedur e which, if not c orrect ly performed or adhered to, may result in death or seri ous physical harm.

Do not proceed beyond a Danger box until the indicated condit ions are fully understood and met.

The following is an example of the Warning box.

Warning 1 — Possibility of equipment damage. Warning 2 — Possibility of data loss.

The Warning box indicates that the described activ ity or situation may, or will, cause equipment damage, loss of data, or serious performance problems. It identifies a possible equipment-damaging situation or provides essential information to avoid the degradation of system operations or data.

Do not proceed beyond a warning until the indica ted condit ions are fully und erstood and met.

Issue: 01P03 3TG-00088-AAAA-TCZZA 15

ETSI safety guidelines

Nokia FastMile Outdoor Unit User Manual

The following is an example of the Caution box.

Caution 1 — Possibility of service interruption. Caution 2 — Service interruption.

The Caution box indicates that th e describe d acti vity or si tuati on may, or will , cause service interruption.

Do not proceed beyond a caution until the indicated conditions are fully und erstood and met.

The following is an example of the Note box.

Note — Information of special interest.

The Note box provides information that assists the personnel working with Nokia FastMile Outdoor Unit equipment. It does not pr ovide safety-related instructions.

3.1.2 Safety-related labels

The Nokia FastMile Outdoor Unit equipment is labeled with the speci fic safety instructions and compliance information that is related to a product, or produc t variant, of the equipment. Observe the inst ructions on the safety labels.

Table 2 provides sample safety labels on Nokia FastMi le Outdoor Unit equipment.

Table 2 Safety labels

Description Label text

ESD warning Caution: This assembly contains an electrostatic sensitive device.

3.2 Safety standards compliance

This section describes Nokia FastMile Outdoor Unit equipment compl iance with the European safety standards.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual ETSI safety guidelines

3.2.1 EMC compliance

The Nokia FastMile Outdoor Unit equipment complies with the foll owing EMC requirements:

• Electromagnetic compatibility of multimedia equipment - Emission requirements

CISPR 32, EN 55032

• Electromagnetic compatibility of multimedia equipment - Immunity requirements

CISPR 35, EN55035

• Electromagnetic Compatibility (EMC) standar d for radio equipment and servic es;

Part 1: Common technical requirements; Harmonized Standard covering the essential requirements of ar ticle 3.1(b) of Di rective 2014/53/ EU and the essential requirements of article 6 of Directi ve 2014/30/EU EN 301489-1

• Electromagnetic Compatibility (EMC) standar d for radio equipment and servic es;

Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonized Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU EN 301489-17

3.2.2 Equipment safety standard compliance

The Nokia FastMile Outdoor Unit equipment complies with the requirements of the following:

• EN 60950-1, Safety of Information Technology Equi pme nt for use in a restricted

location (per R-269)

• IEC 60950-22, EN 60950-22: Information Technology Equipment- Safet y - Part 22

Equipment to be installed Outdoors

3.2.3 Environmental standard comp liance

The Nokia FastMile Outdoor Unit equipment complies wit h the EN 300 019 European environmental standards.

3.2.4 Laser product standard compliance

The Nokia FastMile Outdoor Unit equipment is not a laser product.

Issue: 01P03 3TG-00088-AAAA-TCZZA 17

ETSI safety guidelines

3.3 Electrical safety guidelines

3.3.1 Power supplies

Nokia FastMile Outdoor Unit User Manual

This section provides the electr ical safe ty guideli nes for the Noki a FastMile Outdoo r Unit equipment.

Note 1 — The Nokia FastMile Outdoor Unit eq uipment complies

with the U.S. National El ectrical Code. However, local elect rical authorities have jurisdiction when there are differences between the local and U.S. standards.

Note 2 — The Nokia FastMile Outdoor Unit eq uipment complies

with BS EN 61140.

The use of any non-Nokia approved power supplies or power adapters is not supported or endorsed by Nok ia. Such use wil l void any warranty or support co ntract with Nokia. Such use greatly increases the danger of damage to equipment or property.

3.3.2 Cabling

The following are the guidelines regarding cables used for the Nokia FastMile Outdoor Unit equipment:

• All cables must be approved by the relevant national electrical code.

• Cables for outdoor connection to the Nokia FastMile Outdoor Unit equipment

must be suitable for outdoor use.

• The Nokia FastMile Outdoor Unit equipment must be used with the cabling

supplied with the equipment.

3.3.3 Protective earth

Earthing and bonding of the Nokia FastMile Outdoor Unit equipmen t mus t comply with the requirements of local electrical codes.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual ETSI safety guidelines

3.4 ESD safety guidelines

The Nokia FastMile Outdoor Unit equipment is sensitive to ESD if opened. Operations personnel must observe the f ollowing ESD instructions when they handle the Nokia FastMile Outdoor Unit equipment.

Caution — This equipment is ESD sensitive if opened. Proper

ESD protections should be u sed if you open the Noki a FastMile Outdoor Unit.

Service personnel are not required to wear wrist straps when performing normal installation or maintenance activities.

3.5 Envir onmental requireme nts

See chapter 9 in this guide for more information about temperature ranges for the Nokia FastMile Outdoor Unit equipment and other Nokia FastMile Outdoo r Unit specifications.

During operation in the supported t emperature range, condensation i nside the Nokia FastMile Outdoor Unit equipment caused by humidit y is not an issue because the Nokia FastMile Outdoor Unit is a sealed unit.

3.6 Additional information

See Chapter 10 for RF exposure information.

Issue: 01P03 3TG-00088-AAAA-TCZZA 19

Nokia FastMile Outdoor Unit User Manual ANSI safety guidelines

4 ANSI safety guidelines

This chapter provides information about the mandat ory regulations that govern the installation and operati on of the Nokia FastMile Outdoor Uni t equipment in the North American or ANSI market.

4.1 Safety instructions

This section describes the safety instructions that are provided in the customer documentation and on the Nokia FastMile Outdoor Unit equipment.

4.1.1 Safety instruction boxes in customer documentation

The safety instruction boxes are provided in the Nokia FastMile Outdoor Unit customer documentation. Observe the instructions to meet safety requirements.

The following is an example of the Danger box.

Danger — Possibility of personal injury.

Do not proceed beyond a Danger box until the indicated condit ions are fully understood and met.

The following is an example of the Warning box.

Warning 1 — Possibility of equipment damage. Warning 2 — Possibility of data loss.

Do not proceed beyond a warning until the indica ted condit ions are fully und erstood and met.

Issue: 01P03 3TG-00088-AAAA-TCZZA 21

ANSI safety guidelines

Nokia FastMile Outdoor Unit User Manual

The following is an example of the Caution box.

Caution 1 — Possibility of service interruption. Caution 2 — Service interruption.

The Caution box indicates that th e describe d acti vity or si tuati on may, or will , cause service interruption.

Do not proceed beyond a caution until the indicated conditions are fully und erstood and met.

The following is an example of the Note box.

Note — Information of special interest.

The Note box provides information that assists the personnel working with Nokia FastMile Outdoor Unit equipment. It does not pr ovide safety-related instructions.

4.1.2 Safety-related labels

The Nokia FastMile Outdoor Unit equipment is labeled with specific safety compliance information and instructions that are related to a product, or product variant, of the equipment. Observe the inst ructions on the safety labels.

Table 3 provides examples of the text in the various Nokia FastMile Outdoor Unit equipment safety labels.

Table 3 Safety labels

Description Label text

UL compliance ETL/cETL UL50E compliance Type 3 ESD warning Caution: This assembly contains electrostatic sensitive device. FCC standards compliance Tested to comply with FCC standards for home or office use. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is

CE marking There are various CE symbols for CE compliance.

subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual ANSI safety guidelines

18533

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Tested to Comply with FCC Standards

FOR HOME OR OFFICE USE

COMMUNICATION SERVICE EQUIPMENT US LISTED 27FY Type 3R Enclosure - Rainproof

CAUTION

This Assembly Contains Electrostatic Sensitive Devices

Figure 4 shows a sample safety label for FCC and Figure 5 shows a sample safety label for ETL.

Figure 4 Sample safety label for FCC

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la class B est conforme a la norme NMB-003 du Canada

Figure 5 Sample safety label for ETL

5011710

27799

4.2 Safety standards compliance

This section describes the Nokia FastMile Outdo or Uni t equipment co mpliance wi th North American safety standards.

Warning — Changes or modifications to this unit not expressly

approved by the party responsible for compli ance could void

Issue: 01P03 3TG-00088-AAAA-TCZZA 23

the user's authority to operate the equipment.

ANSI safety guidelines

4.2.1 EMC, EMI, and ESD compliance

Nokia FastMile Outdoor Unit User Manual

The Nokia FastMile Outdoor Unit equipment complies with th e following EMC, EMI, and ESD requirements:

•

Federal Communications Commission PART 15-RADIO FREQUENCY DEVICES

Subpart C-INTENTIONAL RADIATORS Title 47 CFR Part 15. Part 15.247

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentia l installation. This eq uipment generates, us es and can radiate radio frequenc y energy and, if not installed and us ed in accordance with the i nstructions, may ca use harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turni ng the equipment of f and on, th e user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the recei ving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is needed.

• Consult the dealer or an experienced radio/TV technician for help.

4.2.2 Equipment safety standard compliance

The Nokia FastMile Outdoor Unit equipment complies with the requirements of:

• UL62368-1, Outdoor ONTs to “Communication Service Equipment” (CSE) and

Indoor ONTs to Information Technology Equipment (ITE)

• Information Technology Equipment- Safety - Part 22 Equipment to be installed

Outdoors

• UL 60950-22

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual ANSI safety guidelines

4.3 Electrical safety guidelines

This section provides the electr ical safe ty guideli nes for the Noki a FastMile Outdoo r Unit equipment.

Note — The Nokia FastMile Outdoor Unit equipment compl ies

with the U.S. National El ectrical Code. However, local elect rical authorities have jurisdiction when there are differences between the local and U.S. standards.

4.3.1 Power supplies

4.3.2 Cabling

The following are the guidelines regarding cables used for the Nokia FastMile Outdoor Unit equipment:

• All cables must be approved by the relevant national electrical code.

• Cables for outdoor connection to the Nokia FastMile Outdoor Unit equipment

must be suitable for outdoor use.

• The Nokia FastMile Outdoor Unit equipment must be used with the cabling

supplied with the equipment.

4.3.3 Protective earth

Earthing and bonding of the Nokia FastMile Outdoor Unit equipmen t mus t comply with the requirements of NEC article 250 or local electrical codes.

Issue: 01P03 3TG-00088-AAAA-TCZZA 25

ANSI safety guidelines

4.4 ESD safety guidelines

4.5 Envir onmental requireme nts

Nokia FastMile Outdoor Unit User Manual

The Nokia FastMile Outdoor Unit equipment is sensitive to ESD if opened. Operations personnel must observe the f ollowing ESD instructions when they handle the Nokia FastMile Outdoor Unit equipment.

Caution — This equipment is ESD sensitive if opened. Proper

ESD protections should be u sed if you open the Noki a FastMile Outdoor Unit.

Service personnel are not required to wear wrist straps when performing normal installation or maintenance activities.

See chapter 9 in this guide for more information about temperature ranges for the Nokia FastMile Outdoor Unit equipment and other Nokia FastMile Outdoo r Unit specifications.

4.6 Additional information

See Chapter 10 for RF exposure information. See Chapter 11 for additional FCC compliance information.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual

1 Preface.............................................................................................3

1.1 Scope ..........................................................................................................3

1.2 Audience......................................................................................................3

1.3 Required knowledge....................................................................................3

1.4 Acronyms and initialisms.............................................................................3

1.5 Assistance and ordering phone numbers....................................................4

1.6 Nokia quality processes...............................................................................4

1.7 Safety information........................................................................................4

1.8 Documents ..................................................................................................4

1.9 Special information......................................................................................5

1.9.1 Steps with options or substeps....................................................................6

1.10 Multiple PDF document search ...................................................................7

2 ETSI environmental and CRoHS guidelines.................................9

2.1 Environmental labels ...................................................................................9

2.1.1 Overview......................................................................................................9

2.1.2 Environmental related labels .......................................................................9

2.1.2.1 Products below Maximum Concentration Value (MCV) label......................9

2.1.2.2 Products containing hazardous substances above Maximum

Concentration Value (MCV) label..............................................................10

2.2 Hazardous Substances Table (HST).........................................................11

2.3 Other environmental requirements............................................................12

2.3.1 Environmental requirements......................................................................12

2.3.2 Storage......................................................................................................12

2.3.3 Transportation ...........................................................................................12

2.3.4 Stationary use............................................................................................12

2.3.5 Thermal limitations ....................................................................................12

2.3.6 Material content compliance......................................................................13

2.3.7 End-of-life collection and treatment...........................................................13

2.4 Additional information................................................................................14

3 ETSI safety guidelines... .. ............... ................ ............................. .15

3.1 Safety instructions .....................................................................................15

3.1.1 Safety instruction boxes ............................................................................15

3.1.2 Safety-related labels..................................................................................16

3.2 Safety standards compliance ....................................................................16

3.2.1 EMC compliance .......................................................................................17

3.2.2 Equipment safety standard compliance.....................................................17

3.2.3 Environmental standard compliance .........................................................17

3.2.4 Laser product standard compliance ..........................................................17

3.3 Electrical safety guidelines........................................................................18

3.3.1 Power supplies ..........................................................................................18

3.3.2 Cabling ......................................................................................................18

3.3.3 Protective earth .........................................................................................18

3.4 ESD safety guidelines ...............................................................................19

3.5 Environmental requirements......................................................................19

Issue: 01P03 3TG-00088-AAAA-TCZZA 27

Nokia FastMile Outdoor Unit User Manual

3.6 Additional information................................................................................19

4 ANSI safety guidelines.................................................................21

4.1 Safety instructions .....................................................................................21

4.1.1 Safety instruction boxes in customer documentation................................21

4.1.2 Safety-related labels..................................................................................22

4.2 Safety standards compliance ....................................................................23

4.2.1 EMC, EMI, and ESD compliance...............................................................24

4.2.2 Equipment safety standard compliance.....................................................24

4.3 Electrical safety guidelines........................................................................25

4.3.1 Power supplies ..........................................................................................25

4.3.2 Cabling ......................................................................................................25

4.3.3 Protective earth .........................................................................................25

4.4 ESD safety guidelines ...............................................................................26

4.5 Environmental requirements......................................................................26

4.6 Additional information................................................................................26

5 Overview........................................................................................35

5.1 Product overview.......................................................................................35

5.2 Functional overview...................................................................................37

5.2.1 LTE characteristics....................................................................................38

5.2.2 Ethernet characteristics.............................................................................38

5.2.3 Power supply characteristics.....................................................................38

5.3 Variant overview........................................................................................38

5.3.1 Variant label information............................................................................39

5.4 Physical interfaces ....................................................................................39

5.5 LED behavior ............................................................................................40

5.6 Power information......................................................................................41

5.7 Performance information ...........................................................................41

5.7.1 Throughput information .............................................................................41

5.7.2 Power consumption information................................................................42

5.8 Standards certification........................ ...... ....... ...... ....... ...... ....... ...... ....... ...42

6 Installat io n p ro c e d u re ..... .. .. ................ ............................. ............ 4 5

6.1 Safety information......................................................................................45

6.2 Package contents......................................................................................46

6.3 Installation prerequisites ...........................................................................47

6.3.1 Lightning protection...................................................................................48

6.4 Installation steps for the Nokia FastMile Outdoor Unit ..............................48

6.5 Post-installation of the Nokia FastMile Outdoor Unit.................................73

7 Troubleshooting ...........................................................................85

7.1 Potential problems during installation and startup phase..........................85

7.1.1 Nokia FastMile Outdoor Unit cannot attach to LTE network due to

hardware mismatch...................................................................................85

7.1.2 Failed to get Base Station Location...........................................................85

7.2 Potential problems during execution phase...............................................85

7.2.1 Nokia FastMile Outdoor Unit firmware upgrade to latest build failed.........86

7.2.2 Trace request ............................................................................................86

8 Appendix A: Factory settings......................................................87

8.1 Factory settings.........................................................................................87

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual

9 Appendix B: Specifications .........................................................89

9.1 Specifications ............................................................................................89

10 Appendix C: RF exposure............................................................91

10.1 RF exposure..............................................................................................91

11 Appendix D: FCC statements and label instructions................93

11.1 FCC compliance statement .......................................................................93

11.2 FCC radiation exposure statement............................................................93

11.3 FCC label instructions ...............................................................................93

12 Glossary ........................................................................................95

Issue: 01P03 3TG-00088-AAAA-TCZZA 29

Nokia FastMile Outdoor Unit User Manual

List of figures

2 ETSI environmental and CRoHS guidelines.................................9

Figure 1 Products below MCV value label...............................................................10

Figure 2 Products above MCV value label ..............................................................11

Figure 3 Recycling/take back/disposal of product symbol.......................................13

4 ANSI safety guidelines.................................................................21

Figure 4 Sample safety label for FCC......................................................................23

Figure 5 Sample safety label for ETL ......................................................................23

5 Overview........................................................................................35

Figure 6 Application example of the Nokia FastMile Outdoor Unit ..........................36

Figure 7 Versions of the Nokia FastMile Outdoor Unit ............................................37

Figure 8 Location of physical interfaces on the Nokia FastMile Outdoor Unit .........40

6 Installat io n p ro c e d u re ..... .. .. ................ ............... ................ ..........4 5

Figure 9 Splash screen............................................................................................49

Figure 10 Screen for preparing to scan the QR code................................................50

Figure 11 QR code screen.........................................................................................50

Figure 12 Screen showing the Fresh Install option....................................................51

Figure 13 Screen for logging in to the Nokia Altiplano FastMile Controller ...............52

Figure 14 Screen indicating to use the Nokia Field Assistant app to start

finding a nearby base station.....................................................................53

Figure 15 Screen showing to hold vertically for first person view..............................53

Figure 16 Screen showing to check for obstructions that will block signal from

a base station............................................................................................54

Figure 17 Screen with prompt to allow access to the device’s location.....................55

Figure 18 Screen showing good location with respect to the base station................56

Figure 19 Location of physical interfaces on the Nokia FastMile Outdoor Unit .........57

Figure 20 Attaching the mounting plate to the Nokia FastMile Outdoor Unit.............58

Figure 21 Mounting the wall-mount bracket...............................................................59

Figure 22 Mounting the Nokia FastMile Outdoor Unit................................................60

Figure 23 Location of ports on a PoE injector............................................................61

Figure 24 Screen showing the connect prompt.........................................................62

Figure 25 Screen showing the Bluetooth pairing request..........................................63

Figure 26 Screen for enabling the VPN profile .........................................................64

Figure 27 Screen showing the login prompt..............................................................65

Figure 28 Screen showing that 0% of the reboot process is complete......................66

Figure 29 Screen showing that 100% of the reboot process is complete..................66

Figure 30 Screen showing connecting state..............................................................67

Figure 31 Screen showing offline state......................................................................68

Figure 32 Screen showing online state......................................................................68

Figure 33 System state screen..................................................................................70

Figure 34 Screen that has the “Upload CA certificates” option..................................71

Figure 35 Screen that lists the CA certificates...........................................................72

Figure 36 Screen indicating that uploading of the CA certificates was

successful..................................................................................................72

Figure 37 Splash screen............................................................................................73

Issue: 01P03 3TG-00088-AAAA-TCZZA 31

Nokia FastMile Outdoor Unit User Manual

Figure 38 Screen for preparing to scan the QR code................................................74

re 39 QR code screen.........................................................................................75

Figu

Figure 40 Screen showing the Connect to Receiver option.......................................76

Figure 41 Screen showing the connect prompt.........................................................77

Figure 42 Screen showing the Bluetooth pairing request..........................................78

Figure 43 Screen for enabling the VPN profile .........................................................79

Figure 44 Screen showing the login prompt..............................................................80

Figure 45 System state screen..................................................................................81

Figure 46 Screen that has the “Upload CA certificates” option..................................82

Figure 47 Screen that lists the CA certificates...........................................................83

Figure 48 Screen indicating that uploading of the CA certificates was

successful..................................................................................................83

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual

List of tables

1 Preface.............................................................................................3

Table 1 Main content of manual ...............................................................................3

3 ETSI safety guidelines... .. ............... ................ ............................. .15

Table 2 Safety labels..............................................................................................16

4 ANSI safety guidelines.................................................................21

Table 3 Safety labels..............................................................................................22

5 Overview........................................................................................35

Table 4 Variants of the Nokia FastMile Outdoor Unit.............................................39

Table 5 Label information for Nokia FastMile Outdoor Unit variants......................39

Table 6 Physical interfaces of the Nokia FastMile Outdoor Unit ............................40

Table 7 LED behavior description ..........................................................................40

Table 8 LTE throughput information.......................................................................41

Table 9 Power consumption information................................................................42

Table 10 Standards certifications for the Nokia FastMile Outdoor Unit....................42

6 Installat io n p ro c e d u re ..... .. .. ................ ............................. ............ 4 5

Table 11 LED behavior description ..........................................................................62

9 Appendix B: Specifications .........................................................89

Table 12 Specifications for the Nokia FastMile Outdoor Unit...................................89

Issue: 01P03 3TG-00088-AAAA-TCZZA 33

Nokia FastMile Outdoor Unit User Manual Overview

5Overview

5.1 Product overview

5.2 Functional overview

5.3 Variant overview

5.4 Physical interfaces

5.5 LED behavior

5.6 Power information

5.7 Performance information

5.8 Standards certification

5.1 Product over view

The Nokia FastMile Outdoor Unit is the outdoor unit (ODU) of the Nokia FastMile solution, the purpose of which is to use 3GPP based LTE radio technolo gy to provide broadband connectivity with guaranteed high bitrates in larger service areas in a more cost-efficient manner than is possible with other existing solutions.

The Nokia FastMile solution can overcome network performance challenges faced by today's mobile networks by optimizing all of the following:

• intra site interference due to neighbor sectors in same LTE base station

• inter site interference due to neighbor base stations

• link performance due to wall penetration loss and several miles path loss

The Nokia FastMile Outdoor Unit provides high-performing, wireless broadband access over LTE to meet residential users’ total home connectivity needs for urban, suburban, rural, and deep rural spot s.

The Nokia FastMile Outdoor Unit supports LTE connectivity to an LTE base station in the network and provides 1 Gbps Ethernet connectivi ty through a pre-attached 3 m (9.8 ft) Ethernet cable to an indoor unit, such as a residential gateway like the Nokia 7368 ISAM CPE A-020W-A.

Figure 6 shows an application example of the Nokia FastMile Outdoor Unit.

Issue: 01P03 3TG-00088-AAAA-TCZZA 35

Overview

Nokia FastMile Outdoor Unit User Manual

Figure 6 Application example of the Nokia FastMile Outdoor Unit

WiFi or Ethernet connectivity to end-user devices

Radio basestation

ODU

PoE Injector

IDU

LTE 1 Gbps

Ethernet

Wi-Fi or Ethernet

27903

The Nokia FastMile Outdoor Unit is available in two versions:

• Compact with fixed beamforming antennas

• ABA version with high gain beam steering antenna with automated beam

alignment

Figure 7 shows the two versions of the Nokia FastMile Outdoor Unit .

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Overview

Figure 7 Versions of the Nokia FastMile Outdoor Unit

Compact version ABA version

The Nokia FastMile Outdoor Unit has built-in antenna and an LTE modem that provide the LTE broadband access to the network.

The Nokia FastMile Outdoor Unit is capable of withstanding out door environmental conditions. It has an IP rating of IP66 TYPE3 and can operate in a temperature of –30°C to 65°C (–22°F to 149°F). See chapter 9 for additional specifications of the Nokia FastMile Outdoor Unit.

5.2 Functional overview

The Nokia FastMile Outdoor Unit provides wireless broadband ac cess in the form of LTE to meet the ever growing network needs of end users.

The Nokia FastMile Outdoor Unit lets operators use LTE to offer fixed wireless broadband to their customers. The Nokia Fast Mile Outdoor Unit is easy to inst all and user-friendly to oper ate. It uses a mobi le phone insta llation appl ication known as the Nokia Field Assistant to make sure that it is deployed in the opt imal location.

The Nokia FastMile Outdoor Unit supp orts r emote management capab ili ty, al lowin g management and health monitoring of it from the Nokia Altiplano Fast Mile Controller.

27897

Issue: 01P03 3TG-00088-AAAA-TCZZA 37

Overview

5.2.1 LTE characteristics

The following are some of the key LTE characteristi cs of the Nokia FastMi le Outdoor Unit:

• LTE 3GPP Release 12 Compliant, UE Category 12

•

transmit power: max +16 dBm +/- 2 dBm

• has variants that support the following E-UTRA bands:

• Band 43/48

5.2.2 Ethernet characteristics

The following are some of the key Ethernet characteris tics of the Nokia FastMile Outdoor Unit:

• provides a 1 Gbps Ethernet LAN Interface

• supports IEEE802.3 1000BASE-T

• supports IEEE802.3az energy efficient Ethernet

• has a pre-attached 3 m (9. 8 ft) Cat5e shiel ded twisted pai r Ethernet c able with an

RJ 45 connector at the free end; the same cable is also used for power over Ethernet (PoE) as per IEEE802 .3 at type-2 and for gr ounding to a n indoor gr ound

Nokia FastMile Outdoor Unit User Manual

5.2.3 Power supply characteristics

The following are some of t he key power supply character istics of the Nokia FastMil e Outdoor Unit:

• powered through PoE from an indoor unit, such as a residential gateway, or

through a PoE injector; the same cable also provides grounding to an indoor ground

• supports PoE+ as per IEEE802.3 at type-2

• rating: 53 VDC at 600 mA

See section 5.6 for power information.

5.3 Variant overview

Variants are available for the Nokia FastMile Outdoor Unit to support different E-UTRA bands for LTE.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Overview

Table 4 describes the E-UTRA band and frequency support and the antenna configurations for each v ariant of the Nokia Fast Mile Outdoor Unit, a nd provides t he orderable part number.

Table 4 Variants of the Nokia FastMile Outdoor Unit

Version and variant

Compact B48

E-UTRA band support and frequencies Antenna configuration Part number

Band 48: TDD, 3650 MHz – 3700 MHz

•

Integrated with 14 dBi 3FE 75113 AAAA

5.3.1 Variant label information

Table 5 describes the label informati on for the variants of the Nokia FastMile Outdoor Unit.

Table 5 Label information for Nokia FastMile Outdoor Unit variants

Version and variant Product details Model

Compact B48

Nokia FM compact 3FE75113AAAA

5.4 Physical interfaces

Table 6 describes the physical interfaces of the Nokia FastMile Outdoor Unit.

Issue: 01P03 3TG-00088-AAAA-TCZZA 39

Overview

Nokia FastMile Outdoor Unit User Manual

Table 6 Physical interfaces of the Nokia FastMile Outdoor Unit

Interface Description

Ground point External ground point in case a ground separate from indoor grounding provided by the

Ethernet cable is required

Ethernet cable Pre-attached 3 m (9.8 ft) Ethernet cable; the same cable is also used for power (PoE

as per IEEE802.3 at type-2) and for grounding to an indoor ground. The RJ 45 connector at the free end of the cable supports connection of an additional

length of cat5e shielded Ethernet cabling up to a maximum of 40 m (131 ft) in combined

length. Reset button Button to reset the Nokia FastMile Outdoor Unit LED Single multifunction LED that indicates status information for the Nokia FastMile

Outdoor Unit

See section 5.5 for information about LED behavior SIM slot Slot for Nano/4FF SIM card for the Nokia FastMile Outdoor Unit

Figure 8 shows the location of the phy sical interface s on the Nokia FastMile Outdoor Unit. Note that the cover for the SIM slot has been removed to show the slot.

Figure 8 Location of physical interfaces on the Nokia FastMile Outdoor Unit

SIM slot

Ground point

Ethernet Cable

LED Reset

button

5.5 LED behavior

Table 7 describes the behavior of the Nokia FastMile Outdoor Unit LED.

Table 7 LED behavior description

LED color LED behavi or LED behavior description

Green Blinking once per second OAM link broken

Blinking twice per second Kernel or application start up

Solid Power on

27898

(1 of 2)

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Overview

LED color LED behavi or LED behavior description

Red Blinking once per second Major or critical alarm

Solid Minor alarm Blue Solid Bluetooth connection established

(2 of 2)

5.6 Power information

The Nokia FastMile Outdoor Unit recei ves power though a CAT5e shiel ded Ethernet cable connected to an indo or unit, such as a residential gateway like the Noki a 7368 ISAM CPE A-020W-A, or a PoE injector.

See section 5.7.2 for power consumption information.

5.7 Performance info rmation

This section provides throughput and power consumpti on information for the Nokia FastMile Outdoor Unit:

• section 5.7.1 provides throughput consumption information

• section 5.7.2 provides power consumption information

5.7.1 Throughput information

<< need LTE throughput data for the table and some Ethernet

throughput info

Table 8 provides LTE throughput information for the Nokia FastMile Outdoor Unit.

Table 8 LTE throughput information

Mode UDP UL UDP DL UDP Bi-dir

FDD TDD

The results in the above table are based on the following:

(UL/DL)

TCP UL TCP DL TCP Bi-dir

(UL/DL)

• cell bandwidth 20MHz max

•

TDD for Band 43/48

Issue: 01P03 3TG-00088-AAAA-TCZZA 41

Overview

Nokia FastMile Outdoor Unit User Manual

Data rates can have a margin of 2%

•

• Packet length is 1460B for UDP

• Window is 128k for TCP

• Data rates are for IPv4 cases

Ethernet throughput for the Noki a FastMile Outdoor Uni t is as per standa rd Ethernet 1000BASE-T, with a maximum of 1000 Mbps. The Ethernet link gets negotiated at 1000 Mbps when the indoor unit, such as a residential gateway li ke the Nokia 7368 ISAM CPE A-020W-A, or a PoE injector is connected to the Nokia FastMile Outdoor Unit. The end-to-end throughput is achieved in the conductive mode with cable connected.

5.7.2 Power consum ption information

Table 9 provides power consumption information for the Nokia FastMile Outdoor Unit.

Table 9 Power consumption information

Condition Power consumption

Maximum power output 7 w Provisioned but not activated 1 w

5.8 Standards certification

Table 10 provi des standards certificati on information for the Nokia FastMil e Outdoor Unit.

Table 10 Standards certifications for the Nokia FastMile Outdoor Unit

Category Certifications

EMC

FCC 47 Parts 90 for Band 43, 48 of the Compact version

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Overview

The FCC ID is valid for Band 43,48 of the Compac

t version

See chapter 11 for FCC statements and label instructions.

Issue: 01P03 3TG-00088-AAAA-TCZZA 43

Nokia FastMile Outdoor Unit User Manual Installation procedure

6 Installation procedure

6.1 Safety information

6.2 Package contents

6.3 Installation prerequisites

6.4 Installation steps for the Nokia FastMile Outdoor Unit

6.5 Post-installation of the Nokia FastMile Outdoor Unit

6.1 Safety information

Be sure to observe the following before installing the Nokia FastMile Outdoor Unit:

• Professional installat ion is recommended for the Nokia FastMile Outdoor Unit. If

the end-user is going to instal l the Nokia FastMile Outdoor Unit, appr opriate safety instructions and appropriate information must be provided.

• Only use a Nokia-approved indoor unit or a Nokia-approved PoE Injector for

powering the Nokia FastMile Outdoor Unit.

Issue: 01P03 3TG-00088-AAAA-TCZZA 45

Installation procedure

Nokia FastMile Outdoor Unit User Manual

Do not provide power to the Nokia FastMile Outdoor Unit before comple ting the

•

hardware installation step of the installation procedure.

• Maintain at least 50 cm (20 in) distance from the fron t fac e of the Nokia FastMile

Outdoor Unit while the system is operating.

Danger 1 — Lightning danger: Since cables from exter nal

environment may connect to the syste m and they are exp osed to lightning, do not work on equi pment or cables during peri ods of lightning activity.

Danger 2 — Height danger: Falling from high elevations can

cause serious injury or death. Caution should be observed whenever performing aerial installations.

Danger 3 — Power danger:

• Hazardous electrical voltages and currents can cause

serious physical harm or death. Always use insulated tools and follow proper safety precautions when connecting or disconnecting power circuits.

• Make sure all sources of power are turned off and have no

live voltages present on feed lines or terminals. Use a voltmeter to measure for voltage before proceedi ng.

• Always contact the local utility company before connecting

the equipment to power.

6.2 Package contents

The shipping package for the Nokia FastMile Outdoor Unit contains the following:

• Nokia FastMile Outdoor Unit (quant ity one) with pre-attache d 3 m (9.8 ft) Ethernet

cable

• wall mount-bracket and mounting plate (quantity one of each), attached to each

other with three fasteners when shipped

• two screws for attaching the mounting plate to the Nokia FastMile Outdoor Unit

The outside of the shipping package of the Nokia FastMile Outdoor Unit has a QR code that has system-use information for the Nokia FastMile Outdoor Unit.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

6.3 Installation prerequ i sites

Be sure to observe the following prerequisites before installing the Nokia FastMile Outdoor Unit:

• Installation personnel must have knowledge about installing the unit

• A valid Nano/4FF SIM card is needed for the Nokia FastMile Outdoor Unit to

communicate with the LTE net

• If required, a Cat5e shielded Ethern et cable that can be connected to the Ethern et

ble of the Nokia FastMile Outdoor Unit to make it longer, up to a maximum

40 m

(131 ft) in combined length

• A ground cable is needed if the Nokia FastMile Outdoor Unit will be grounded

parately from the indoor ground provided by the Ether net cable; req uir

y suitable for hex socket k nurled he ad cup screw assembl ies, ISO 4762-

• Appropriate fasteners for secu ring the Nokia FastMil e Outdoor Uni t to an outside

wall

• Silicone or other waterproof sealing or caulking compound

• Mechanical tools are required (but are not included) for mounting the Nokia

Fas

tMile Outdoor Unit

• Phillips screwdrive r to open the SIM slot

• hex key as described above if ground cable is needed

• The Nokia Field Assistant app must be installed on an Android mobile phone

hrough Google Play and the mobile phone must have a camera and hardware

compass and Android OS 6.0 (Marshmallow) or above

• The following certificates need to be stored in the download folder of the mobile

phone:

work

es a hex

M5X8

• The LTE base station that will be used by the Nokia FastMile Outdoor Unit must

be available and functioning

• The indoor unit, such as a residential gateway like the Nokia 7368 ISAM CPE

A-020W-A, that will be connecting to the Nokia FastMil e Outdoor Unit must be available and reachable; if the indo or unit cann ot supp ly PoE power to the Nokia FastMile Outdoor Unit, then a Nokia-approved PoE injector must be used in conjunction with the indoor unit

Issue: 01P03 3TG-00088-AAAA-TCZZA 47

Installation procedure

6.3.1 Lightning protection

6.4 Installation steps for the Nokia Fast Mile

Nokia FastMile Outdoor Unit User Manual

Be sure to observe the following lightning protection information:

Danger — If you are installing the Nok ia FastMile Outdoor Unit

above roof level, check that lightning rods are above the planned installation location.

PoE+ capable surge protectors should be used if the out side cabling is longer than 10 meters (32 feet). If the outside cable length is less than 10 meters (32 feet), no protection is required .

Only use a properly earthed wall socket for powering the indoor unit or PoE+ injector.

Outdoor Unit

The Nokia FastMile Outdoor Unit can be install ed by using the Nokia Field Assist ant app in conjunction with the following steps.

The Nokia Field Assistant app must be installed on a mobile phone as indi cated in section 6.3 before you start the Nokia FastMi le Outdoor Unit installation procedure.

The following need to be c onsidered before the start of Nokia F astMile Outdo or Unit installation procedure:

• Follow the installation step s with exact order described in Procedure 6

• During the installation procedure and especially dur ing base station locati on, you

need to avoid sending the Nokia Field Assistant app to backgr ound or press back and forth options, otherwise the procedure will fail and you won't be able to register again the Subscription ID since it will be considered already registered.

• During installation the procedure you need to ensur e that the connection between

the Nokia Field Assistan t app and the Nokia Al tiplano FastMile Contr oller (WiFi or LTE) and the connection between the Nokia Field Assistant app and the Nokia FastMile Outdoor Unit (Bluetooth and VPN) will not be lost otherwise installat ion will fail.

• You need to finish the Nokia FastMile Outdoor Unit install a tion procedure within

number needed >> minutes from the time the Nokia Field Assistant app is

connected to the Nokia Altiplano FastMile Controller, otherwise the installation procedure will fail.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

Procedure 6 To install the Nokia FastMile Outdoor Unit

1 Connect the mobile phone to the Internet and open the Nokia Field Assistant app on the

phone. A splash screen appears on screen for a few seconds. Figure 9 shows the splash screen.

Figure 9 Splash screen

While the splash screen is showing, you can:

• learn about the Nokia Field Assistant app by tapping on the “More” option

• get information about the open source software included in Nokia Field Assistant by

tapping on the “Open source licenses” option

2 After the splash screen has cleared, the Nokia Field Assistant app prompts you to scan the

QR code of the Nokia FastMile Outdoor Unit so that the app can access the MAC address, serial number, and device type of the Nokia FastMile Outdoor Unit.

Tap on “Scan” to start the scan of the QR code. Figure 10 shows the screen for preparing to scan the QR code.

Issue: 01P03 3TG-00088-AAAA-TCZZA 49

Installation procedure

Nokia FastMile Outdoor Unit User Manual

Figure 10 Screen for preparing to scan the QR code

Use the viewfinder of the phone to align with the QR code on the shipping package of the Nokia FastMile Outdoor Unit.

Figure 11 shows the QR code screen.

Figure 11 QR code screen

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

3 After successful scan of the QR code, the Nokia Field Assistant app redirects you to the

home screen so that you can start a fresh install for the Nokia FastMile Outdoor Unit. Tap on the “Fresh Install” option from the main menu of the Nokia Field Assistant app. Figure 12 shows the Fresh Install option.

Figure 12 Screen showing the Fresh Install option

4 After you select the Fresh Install option, the Nokia Field Assistant app needs you to log in to

the Nokia Altiplano FastMile Controller. A login screen prompts you to input the user name, password, FastMile Controller URL, and

the Subscription ID. Figure 13 shows the prompt to log in to the Nokia Altiplano FastMile Controller.

Issue: 01P03 3TG-00088-AAAA-TCZZA 51

Installation procedure

Nokia FastMile Outdoor Unit User Manual

Figure 13 Screen for logging in to the Nokia Altiplano FastMile Controller

When the button is enabled (that is, it turns to blue), tap on “Login” to log in to the Nokia Altiplano FastMile Controller

5 The Nokia Field Assistant app provides instructions on to find a base station.

Figure 14 shows the screen that indicates to use Nokia Field Assistant app to start finding a nearby base station.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

Figure 14 Screen indicating to use the Nokia Field Assistant app to start

finding a nearby base station

Figure 15 shows to screen to hold vertically for first person view.

Figure 15 Screen showing to hold vertically for first person view

Issue: 01P03 3TG-00088-AAAA-TCZZA 53

Installation procedure

Nokia FastMile Outdoor Unit User Manual

Figure 16 shows the screen indicating to check for obstructions that will block the s ignal from a base station.

Figure 16 Screen showing to check for obstructions that will block signal

from a base station

6 The Nokia Field Assistant app sends the Subscription ID, Serial Number, Device Type,

Geocoordinates of Mobile phone to the Nokia Altiplano FastMile Controller using token authorization.

The Nokia Field Assistant app retrieves the Cell ID and Geocoordinates of provided Cell ID from the Nokia Altiplano FastMile Controller.

7 The Nokia Field Assistant app prompts you to allow access to location of the Nokia FastMile

Outdoor Unit. Figure 17 shows the prompt to allow access to the device’s location.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

Figure 17 Screen with prompt to allow access to the device’s location

Tap on “Allow” to allow access to the location of the Nokia FastMile Outdoor Unit.

8 The Nokia Field Assistant app uses augmented reality and the mobile phone's camera to

help you identify the direction that the Nokia FastMile Outdoor Unit should be facing, based on base station location information stored by the server.

Note — Do not send the Nokia Field Assistant app to Background or

press back and forth otherwise the installation will fail and you won't be able to repeat procedure for same Subscriber ID.

When the optimal direction is detected, tap on the “Done” option. The Nokia Field Assistant app updates information on the screen dynamically to indic ate the

status of the process.

Issue: 01P03 3TG-00088-AAAA-TCZZA 55

Installation procedure

Nokia FastMile Outdoor Unit User Manual

The Nokia Field Assistant app can do the following:

• inform you about the location status, the fetching of the base station location, and so on

• if the base station is not visible, the app prompts you with an arrow to move left or right

• if the base station is visible in the screen you need to center it in a circle that the app

provides

• if the base station is centered, the app enables the “Done” option so that you can proceed

with the installation

• if the direction of the phone is inaccurate, the app informs you

• if fetching of the base station location from the server went wrong, the app informs you

user

Figure 18 shows the screen with a circle on the base station. The green color in the circle means that this is a good place to mount the Nokia FastMile Outdoo r Unit with respect to the location of the base station.

Figure 18 Screen showing good location with respect to the base station

Tap on “Done”.

9 Use a pencil or similar device to mark the location where the Nokia FastMile Outdoor Unit is

to be mounted and be sure to note the direction that the Nokia FastMile Outdoor Unit will need to face with respect to the base station.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

Confirm that the location is suitable for considerations within the home, and that the Ethernet cable (with or without an additional Cat5e shielded Ethernet cable attached) can be safely and securely run though the wall and inside the home from the Nokia FastMile Outdoor Unit to the indoor unit or PoE injector or to the prospective indoor unit or PoE injector location. The indoor unit can be a residential gateway such the Nokia 7368 ISAM CPE A-020W-A; the PoE injector must a Nokia-approved PoE injector.

10 Mount the Nokia FastMile Outdoor Unit and make connections as described below.

As part of this step you will be working with most of the interfaces shown in Figure 19.

Figure 19 Location of physical interfaces on the Nokia FastMile Outdoor Unit

SIM slot

Ground point

LED Reset

button

Ethernet Cable

27898

i Unpack the following from the shipping package:

• Nokia FastMile Outdoor Unit

• wall-mount bracket; note that the wall mount-bracket is shipped attached to the

mounting plate with three fasteners

• two screws for attaching the mounting plate to the Nokia FastMile Outdoor Unit

ii Separate the mounting plate from the wall-mount bracket and save the three fasteners

for securing the mounting plate to the wall-mount bracket later on in this step

iii Use the two supplied screws to attach the mounting plate to the back of the Nokia

FastMile Outdoor Unit as shown in Figure 20.

Issue: 01P03 3TG-00088-AAAA-TCZZA 57

Installation procedure

Nokia FastMile Outdoor Unit User Manual

Figure 20 Attaching the mounting plate to the Nokia Fas tMile Outdoo r Unit

Install the screws

27899

iv Use a Phillips screwdriver to remove the cover from the SIM slot of the Nokia FastMile

Outdoor Unit, insert a valid Nano/4FF SIM card in the slot, and re-attach the cover on the SIM slot. Figure 19 shows the location of the SIM slot on the Nokia FastMile Outdoor Unit.

v As appropriate, drill a hole through the wall for the Ethernet cable from the Nokia

FastMile Outdoor Unit to be able to pass through. It is recommended that you drill the hole for the Ethernet cable at a slight angle so that any water that might enter the hole will run down towards the outside of the home.

vi As appropriate, drill two anchor holes for the wall-mount bracket on the outside of the

wall. The anchor holes should be one directly above the other. You can use the wall-mount bracket as a template for the anchor holes.

vii Mount the wall-mount bracket on the outside of the wall using two appropriate fasteners

in the anchor holes drilled in the previous step, as shown in Figure 21. Ensure that the wall-mount bracket is in a vertical position on the wall.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

Figure 21 Mounting the wall-mount bracket

27900

viii Line up the mounting plate (attached earlier on the back of the Nokia FastMile Outdoor

Unit with the wall-mount bracket and temporarily secure in place with the three saved fasteners as shown in Figure 22. The figure shows one of the fasteners already in place.

Issue: 01P03 3TG-00088-AAAA-TCZZA 59

Installation procedure

Nokia FastMile Outdoor Unit User Manual

Figure 22 Mounting the Nokia FastMile Outdoor Unit

27901

ix If the Nokia FastMile Outdoor Unit is to be connected to an outside ground, use a hex

key to connect the ground cable to the ground connection point of the Nokia FastMile Outdoor Unit and ensure that the far end of the ground cable is connected to a suitable ground point. Figure 19 shows the location of the ground point on the Nokia FastMile Outdoor Unit.

x Pass the Ethernet cable from the Nokia FastMile Outdoor Unit through the hole in the

wall and use silicone or other waterproof sealing or caulking compound to seal the hole.

xi If required, rotate the Nokia FastMile Outdoor Unit +/-35 degrees horizontally for best

alignment with the LTE base tower. Tighten the fasteners to securely hold the Nokia FastMile Outdoor Unit in place.

xii If the Ethernet cable from the Nokia FastMile Outdoor Unit will not be long enough to

reach the indoor unit or PoE injector, make the cable longer by attaching an additional Cat5e shielded Ethernet cable to it. The maximum combined length is 40 m (131 ft).

Do not run the cable to the indoor unit or PoE injector yet.

xiii Confirm that the indoor unit that is going to provide service for the Nokia FastMile

Outdoor Unit is installed and powered up, or install and power up the indoor unit. The indoor unit indoor unit can be a residential gateway such as the Nokia 7368 ISAM CPE A-020W-A.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

xiv If the Nokia FastMile Outdoor Unit is not going to be powered from the indoor unit, set

up a Nokia-approved PoE injector that is going to provide power over Ethernet to the Nokia FastMile Outdoor Unit, including connecting the PoE injector to the indoor unit at the PoE injector's “LAN” port and to power. Figure 23 shows the location of the “LAN” port on a PoE injector. Specifics of the set up will depend on the PoE injector and indoor unit.

Figure 23 Location of ports on a PoE injector

POWER

ACTIVE

LAN

POE

LAN port PoE port

27902

xv Connect the Nokia FastMile Outdoor Unit to its power source:

• If the Nokia FastMile Outdoor Unit is going to be powered directly by the indoor unit,

safely and securely run the Ethernet cabling from the hole in the wall, through the home to the indoor unit, and make the connection at the indoor unit. The Nokia FastMile Outdoor Unit powers up when it receives power from the indoor unit.

• If the Nokia FastMile Outdoor Unit is go ing to be powered by the P oE injector, safely

and securely run the Ethernet cable from the hole in the wall, through the home to the PoE injector, and make the connection at the PoE injector's “POE” port. Figure

23 shows the location of the “POE” port on a PoE injector. Specifics of the set up will

depend on the PoE injector. The Nokia FastMile Outdoor Unit powers up when it receives power from the PoE injector.

xvi Check the LED on the Nokia FastMile Outdoor Unit. The LED is located on the bottom

of the Nokia FastMile Outdoor Unit as shown in Figure 19. Table 11 describes the LED behavior.

Issue: 01P03 3TG-00088-AAAA-TCZZA 61

Installation procedure

Nokia FastMile Outdoor Unit User Manual

Table 11 LED behavior description

LED color LED behavi or LED behavior description

Green Blinking once per second OAM link broken

Blinking twice per second Kernel or application start up

Solid Power on Red Blinking once per second Major or critical alarm

Solid Minor alarm Blue Solid Bluetooth connection established

11 The Nokia Field Assistant app prompts you to connect to the Nokia FastMile Outdoor Unit.

Tap on “Connect” to initiate a Bluetooth connection via MAC address to the Nokia FastMile Outdoor Unit.

Figure 24 shows the screen for the connect prompt.

Figure 24 Screen showing the connect prompt

12 If Bluetooth is not enabled, the Nokia Field Assistant app requests that you allow the

Bluetooth pairing request.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

Allow the Bluetooth pairing request by tapping on “Pair”.

Note — Only one active Bluetooth connection is allowed towards the

Nokia FastMile Outdoor Unit. This means that at any one time, only one mobile phone device can have a Bluetooth connection to the Nokia FastMile Outdoor Unit. In case of a new Bluetooth connection attempt from a different mobile phone, at the same time, the new connection will not be accepted by the Nokia FastMile Outdoor Unit.

Figure 25 shows the screen for the Bluetooth pairing request.

Figure 25 Screen showing the Bluetooth pairing request

13 The Nokia Field Assistant app prompts you to enable the VPN profile.

Enable the VPN profile by tapping on “Connect”.

Note — Any preexisting VPN connection on the mobile phone will be

deactivated when you enable the VPN profile.

Figure 26 shows the screen for enabling the VPN profile.

Issue: 01P03 3TG-00088-AAAA-TCZZA 63

Installation procedure

Nokia FastMile Outdoor Unit User Manual

Figure 26 Screen for enabling the VPN profile

14 After successfully enabling the VPN profile, the Nokia Field Assistant app will log in to the

Nokia FastMile Outdoor Unit to exchange certificates and apply necessary configuration. A login screen appears and prompts you to input credentials for the Nokia FastMile Outdoor

Unit. When the button is enabled (that is, it turns to blue), you can tap on “Connect” to continue. Figure 27 shows the login prompt.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

Figure 27 Screen showing the login prompt

15 After successful credential validation from the Nokia FastMile Outdoor Unit is done, the Nokia

Field Assistant app retrieves the ODU Public Key and sends it to the Nokia Altiplano FastMil e Controller along with Subscription ID. The Nokia Altiplano FastMile Controller uses the ODU Public Key in order to encrypt the config package. The Nokia Field Assistant app retrieves the config package including the encrypted Configuration file, the Public Key (signed by Operator CA) and the Operator CA Certificate.

The Nokia Field Assistant app relays configuration file towards the Nokia FastMile Outdoor Unit.

The Nokia Field Assistant app waits for the Nokia FastMile Outdoor Unit to acknowledge that has received the configuration file.

16 After successful receipt of the configuration file from the Nokia FastMile Outdoor Unit, the

Nokia Field Assistant informs you that the Nokia FastMile Outdoor Unit will be rebooted and prompts you to press “Done” in order to navigate back to main menu.

Figure 28 shows the screen when 0% of the reboot is complete.

Issue: 01P03 3TG-00088-AAAA-TCZZA 65

Installation procedure

Nokia FastMile Outdoor Unit User Manual

Figure 28 Screen showing that 0% of the reboot process is complete

Figure 29 shows the screen when all of the reboot process is complete.

Figure 29 Screen showing that 100% of the reboot process is complete

Tap on “Done” when the Nokia Field Assistant app indicates that the setup is complete.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

17 After the Nokia FastMile Outdoor Unit has finished rebooting, tap on “Connect to Receiver”

on the main menu of the Nokia Field Assistant app to connect to the Nokia FastMile Outdoor Unit.

The Nokia Field Assistant app prompts you to connect again to the Nokia FastMile Outdoor Unit via Bluetooth and afterwards to enable VPN as described in earlier steps.

18 The Nokia Field Assistant shows the status of the connection to the Nokia FastMile Outdoor

Unit. There are three possible states:

• connecting: the Nokia FastMile Outdoor Unit is connecting to LTE network

• offline: the Nokia FastMile Outdoor Unit is not connected to LTE network

• online: the Nokia FastMile Outdoor Unit is connected to the LTE network and is

communicating with the Nokia Altiplano FastMile Controller

Figure 30 shows the connecting state.

Figure 30 Screen showing connecting state

Figure 32 shows the offline state.

Issue: 01P03 3TG-00088-AAAA-TCZZA 67

Installation procedure

Nokia FastMile Outdoor Unit User Manual

Figure 31 Screen showing offline state

Figure 32 shows the online state.

Figure 32 Screen showing online state

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

19 You can view the following information by selecting the Connection Status opti on of the main

screen:

• General stats:

• bytes sent: the total number of bytes sent on the interface

• bytes received: the total number of byte s rece iv ed on the int erfac e

• LTE cell stats:

• cell ID: The ECI of cell

• connection state: Does ODU connect to this cell

• status: The current operational state of the PDN connection

• EARFCN: The carrier f requency in the uplink and dow nlink is designat ed by the E-UT RA.

Absolute Radio Frequency Channel Number (EARFCN) in the range 0 - 65535.

• PCI: The physical cellid of cell

• RSRP: The average value of Reference Signal Received Power (dBm) in measured

interval, resolution 1dBm.

• RSRQ: The average value of Reference Signal Received Quality (dB) in measured

interval, resolution 1dB.

• RSSI: The average value of Received Signal Strength indicator (dBm) in measured

interval, resolution 1dBm.

• SINR: The average value of Signal-to-Interference-plus-Noise Ratio (dB) in measured

interval, resolution 1dB.

Figure 33 shows an example of the System state screen.

Note — After Fresh Installation and when LTE attach is successful,

some of the values displayed will not be updated for some time (values will be zero until the first 15minutes interval is finished).

Issue: 01P03 3TG-00088-AAAA-TCZZA 69

Installation procedure

Nokia FastMile Outdoor Unit User Manual

Figure 33 System state screen

20 Additionally, the main menu of the Nokia Field Assistant app displays an additional option

“Upload CA certificates’ where you can transfer updated certificates (stored under download mobile phone's directory) towards the Nokia FastMile Outdoor Unit.

i Tap on the “Upload CA certificates” option.

Figure 34 shows the screen that has the “Upload CA certificates” option.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

Figure 34 Screen that has the “Upload CA certificates” option

ii Select the required Upload CA certificates and tap on “Ok”. Note that the certificates

must be in the download folder of the mobile pho ne before y ou can upload them to the Nokia FastMile Outdoor Unit.

Figure 35 shows the screen that lists the CA certificates.

Issue: 01P03 3TG-00088-AAAA-TCZZA 71

Installation procedure

Nokia FastMile Outdoor Unit User Manual

Figure 35 Screen that lists the CA certificates

iii Figure 36 shows the screen that indicates that uploading of the CA certificates was

successful.

Figure 36 Screen indicating that uploading of the CA certificates was

successful

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

Tap on “Ok” to clear the message.

6.5 Post-installation of the Nokia FastMile Outdoor Unit

After installation, the Nokia FastMile Outdoor Unit can be accessed by using the Nokia Field Assistant app in conjunction with the following steps.

The Nokia FastMile Outdoor Unit must be instal led as indicated in section 6.4 bef ore you can do this post-installation procedure.

Procedure 7 To access an installed Nokia FastMile Outdoor Unit

1 Connect the mobile phone to the Internet and open the Nokia Field Assistant app on the

phone. A splash screen appears on screen for a few seconds. Figure 9 shows the splash screen.

Figure 37 Splash screen

Issue: 01P03 3TG-00088-AAAA-TCZZA 73

Installation procedure

Nokia FastMile Outdoor Unit User Manual

While the splash screen is showing, you can:

• learn about the Nokia Field Assistant app by tapping on the “More” option

• get information about the open source software included in Nokia Field Assistant by

tapping on the “Open source licenses” option

2 After the splash screen has cleared, the Nokia Field Assistant app prompts you to scan the

QR code of the Nokia FastMile Outdoor Unit so that the app can access the MAC address, serial number, and device type of the Nokia FastMile Outdoor Unit.

Tap on “Scan” to start the scan of the QR code. Figure 10 shows the screen for preparing to scan the QR code.

Figure 38 Screen for preparing to scan the QR code

Use the viewfinder of the phone to align with the QR code on the shipping package of the Nokia FastMile Outdoor Unit.

Figure 11 shows the QR code screen.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

Figure 39 QR code screen

3 After successful scan of the QR code, the Nokia Field Assistant app redirects you to the

home screen so that you can connect to the Nokia FastMile Outdoor Unit. Tap on the “Connect to Receiver” option from the main menu of the Nokia Field Assistant

app. Figure 12 shows the Connect to Receiver option.

Issue: 01P03 3TG-00088-AAAA-TCZZA 75

Installation procedure

Nokia FastMile Outdoor Unit User Manual

Figure 40 Screen showing the Connect to Receiver option

4 The Nokia Field Assistant app prompts you to connect to the Nokia FastMile Outdoor Unit.

Tap on “Connect” to initiate a Bluetooth connection via MAC address to the Nokia FastMile Outdoor Unit.

Figure 24 shows the screen for the connect prompt.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

Figure 41 Screen showing the connect prompt

5 If Bluetooth is not enabled, the Nokia Field Assistant app requests that you allow the

Bluetooth pairing request. Allow the Bluetooth pairing request by tapping on “Pair”.

Note — Only one active Bluetooth connection is allowed towards the

Figure 25 shows the screen for the Bluetooth pairing request.

Issue: 01P03 3TG-00088-AAAA-TCZZA 77

Installation procedure

Nokia FastMile Outdoor Unit User Manual

Figure 42 Screen showing the Bluetooth pairing request

6 The Nokia Field Assistant app prompts you to enable the VPN profile.

Enable the VPN profile by tapping on “Connect”.

Note — Any preexisting VPN connection on the mobile phone will be

deactivated when you enable the VPN profile.

Figure 26 shows the screen for enabling the VPN profile.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

Figure 43 Screen for enabling the VPN profile

7 After successfully enabling the VPN profile, the Nokia Field Assistant app will log in to the

Nokia FastMile Outdoor Unit to exchange certificates and apply necessary configuration. A login screen appears and prompts you to input credentials for the Nokia FastMile Outdoor

Unit. When the button is enabled (that is, it turns to blue), you can tap on “Connect” to continue. Figure 27 shows the login prompt.

Issue: 01P03 3TG-00088-AAAA-TCZZA 79

Installation procedure

Nokia FastMile Outdoor Unit User Manual

Figure 44 Screen showing the login prompt

8 You can view the following information by selecting the Connection Status option of the main

screen:

• General stats:

• bytes sent: the total number of bytes sent on the interface

• bytes received: the total number of byte s rece iv ed on the int erfac e

• LTE cell stats:

• cell ID: The ECI of cell

• connection state: Does ODU connect to this cell

• status: The current operational state of the PDN connection

• EARFCN: The carrier f requency in the uplink and dow nlink is designat ed by the E-UT RA.

Absolute Radio Frequency Channel Number (EARFCN) in the range 0 - 65535.

• PCI: The physical cellid of cell

• RSRP: The average value of Reference Signal Received Power (dBm) in measured

interval, resolution 1dBm.

• RSRQ: The average value of Reference Signal Received Quality (dB) in measured

interval, resolution 1dB.

• RSSI: The average value of Received Signal Strength indicator (dBm) in measured

interval, resolution 1dBm.

• SINR: The average value of Signal-to-Interference-plus-Noise Ratio (dB) in measured

interval, resolution 1dB.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

Figure 33 shows an example of the System state screen.

Note — After Fresh Installation and when LTE attach is successful,

some of the values displayed will not be updated for some time (values will be zero until the first 15minutes interval is finished).

Figure 45 System state screen

9 Additionally, the main menu of the Nokia Field Assistant app displays an additional option

“Upload CA certificates’ where you can transfer updated certificates (stored under download mobile phone's directory) towards the Nokia FastMile Outdoor Unit.

i Tap on the “Upload CA certificates” option.

Figure 34 shows the screen that has the “Upload CA certificates” option.

Issue: 01P03 3TG-00088-AAAA-TCZZA 81

Installation procedure

Nokia FastMile Outdoor Unit User Manual

Figure 46 Screen that has the “Upload CA certificates” option

ii Select the required Upload CA certificates and tap on “Ok”. Note that the certificates

must be in the download folder of the mobile pho ne before y ou can upload them to the Nokia FastMile Outdoor Unit.

Figure 35 shows the screen that lists the CA certificates.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Installation procedure

Figure 47 Screen that lists the CA certificates

iii Figure 36 shows the screen that indicates that uploading of the CA certificates was

successful.

Figure 48 Screen indicating that uploading of the CA certificates was

successful

Issue: 01P03 3TG-00088-AAAA-TCZZA 83

Installation procedure

Nokia FastMile Outdoor Unit User Manual

Tap on “Ok” to clear the message.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Troubleshooting

7 Troubleshooting

7.1 Potential problems during installation and startup phase

7.2 Potential problems during execution phase

7.1 Potential problems during installation and startup phase

The following are potential probl ems that can occur during the installa tion and startup phase.

7.1.1 Nokia FastMile Outdoor Unit cannot attach to LTE network due to hardware mismatch

This issue can be due to E-UTRA band support mismatch between the Nokia FastMile Outdoor Unit and LT E network because th e Nokia FastMile Outdoor Unit is not the correct variant for the E-UTRA band of the LTE network.

Check the variants listed in secti on 5.3 to see if the variant you are installing supports the E-UTRA band of the LTE network. If there is a mismatch, change the Nokia FastMile Outdoor Unit to a variant that supports the E-UTRA band of the LTE network. If the variant is correct, co ntact operator.

7.1.2 Failed to get Base Station Location

One possible cause of this error, visible on Augmented Reality View, is the input of wrong Subscription ID at login step to the Nokia Altiplano FastMile Controller.

By pressing Retry button problem persists. In order to overcome this issue, press Back option until you reach login step and

enter again a valid Subscription ID.

7.2 Potential problems during execution phase

The following are potential problems that can occu r during the execution phase.

Issue: 01P03 3TG-00088-AAAA-TCZZA 85

Troubleshooting

7.2.1 Nokia FastMile Outdoor Unit firmware upgrade to

7.2.2 Trace request

Nokia FastMile Outdoor Unit User Manual

latest build failed

This issue can be due to a radio signal issue in the LTE network for the Nokia FastMile Outdoor Unit.

If another LTE network is available, select it f or the Nokia FastMile Outdoor Unit. When the connection to the Noki a Altiplano FastMile Controller is recovered, check the radio signal condition. If no problem, then perfo rm the firmware upgrade again.

If problem persists, contact oper ator.

The Nokia FastMile Outdoor Unit has a trace and log function that can be used for trouble shooting purposes and for help in performing root cause analysis.

If internet is available for the Nokia FastMile Outdoor Unit, contact Nokia to request that the trace and log function be used for the Nokia FastMile Outdoor Unit.

The trace log can be uploaded to the Nokia Altiplano FastMile Controller or other HTTP file servers.

3TG-00088-AAAA-TCZZA Issue: 01P03

Nokia FastMile Outdoor Unit User Manual Appendix A: Factory settings

8 Appendix A: Factory settings

8.1 Factory settings

<< need input - assume that will be similar to the type of info in the 17.10

FastMile Home Outdoor Modem User Manual

Issue: 01P03 3TG-00088-AAAA-TCZZA 87

Nokia FastMile Outdoor Unit User Manual Appendix B: Specifications

9 Appendix B: Specifications

9.1 Specifications

Table 12 provides some specifications for the Noki a FastMile Outdoor Unit.

Table 12 Specifications for the Nokia FastMile Outdoor Unit

Item Description

Dimensions Compact: 23.5 cm by 23.5 cm by 5.2 cm (9.3

Weight Compact: 1.3 kg (2.9 lb)

Power consumption Less than 8 w Operating altitude Maximum operating altitude is 3048 m (10

Non-operating altitude Maximum non-operating altitude is 12 192 m

Operating temperature –30°C to 65°C (–22°F to 149°F) Storage temperature –40°C to 85°C (–85°F to 185°F) Operating humidity 5% to 85% relative humidity, non-condensing Storage humidity 5% to 93% relative humidity, non-condensing IP rating IP66 TYPE3

in by 9.3 in by 2 in) ABA: 31.8 cm by 31.8 cm by 5.6 cm (12.5 in

by 12.5 in by 2.2 in)

ABA: 2 kg (4.4. lb )

000 ft) above mean sea level

(40 000 ft) above mean sea level

Issue: 01P03 3TG-00088-AAAA-TCZZA 89

Nokia FastMile Outdoor Unit User Manual Appendix C: RF exposure

10 Appendix C: RF exposure

10.1 RF exposure

<< this information needs to be verified >> The international standard used for the assessment of this device provides simple

conformity assessment methods for low power el ectronic and electrical equipment to an exposure limit relevant to electromagnet ic fields (EMF).

Based on the compliance criteria for maximum permissible exposure as in EN 50385:2017 and CE Council Recommendation Directive 2014/53/EU

Issue: 01P03 3TG-00088-AAAA-TCZZA 91

Nokia FastMile Outdoor Unit User Manual Appendix D: FCC statements and label instructions

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 25cm between the radiator& your body.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

—Reorient or relocate the receiving antenna.

—

Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help.

it is not permitted to use the product on aircraft or satellites.

Issue: 01P03 3TG-00088-AAAA-TCZZA 93

Nokia FastMile Outdoor Unit User Manual Glossary

11 Glossary

<< this will be populated when the document is closer to completion >> This glossary provides the expansions and optional descr iptions of most acronyms

and initialisms that appear in this document.

3GPP 3rd Generation Partnership Project ABA Automated Beam Alignment E-UTRA Evolved Universal Terrestrial Radio Access LTE Long-Term Evolution

Issue: 01P03 3TG-00088-AAAA-TCZZA 95

Customer document and product support

Customer documentation

Customer Documentation Welcome Page

Technical Support

Customer Documen tation Technical Support

Documentation feedback

Customer Documentation Feedback

Nokia 34003800FM20 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

1 Preface

1.1 Scope

1.2 Audience

1.3 Required knowledge

1.4 Acronym s and initialisms

1.5 Assistance and ordering phone numbers

1.6 Nokia quality processes

1.7 Safety information

1.8 Documents

1.9 Special information

1.9.1 Steps with options or substeps

1.10 Multiple PDF document search

Nokia FastMile Outdoor Unit User Manual ETSI environmental and CRoHS guidelines

2.1 Environmental labels

2.1.1 Overview

2.1.2 Environmental rel ated labels

2.1.2.1 Products below Maximum Concentration Value (MCV) label

2.1.2.2 Products containing hazardous substances above Maximum Concentration Value (MCV) label

2.2 Hazardous Substances Table (HST)

2.3 Other environmental requiremen ts

2.3.1 Environmental requirement s

2.3.2 Storage

2.3.3 Transportation

2.3.4 Stationa ry use

2.3.5 Thermal limitations

2.3.6 Material content compliance

2.3.7 End-of-life collection and treatment

2.4 Additional information

3 ETSI safety guidelines

3.1 Safety instructions

3.1.1 Safety instruction boxes

3.1.2 Safety-related labels

3.2 Safety standards compliance

3.2.1 EMC compliance

3.2.2 Equipment safety standard compliance

3.2.3 Environmental standard comp liance

3.2.4 Laser product standard compliance

3.3 Electrical safety guidelines

3.3.1 Power supplies

3.3.2 Cabling

3.3.3 Protective earth

3.4 ESD safety guidelines

3.5 Envir onmental requireme nts

3.6 Additional information

4 ANSI safety guidelines

4.1 Safety instructions

4.1.1 Safety instruction boxes in customer documentation

4.1.2 Safety-related labels

4.2 Safety standards compliance

4.2.1 EMC, EMI, and ESD compliance

4.2.2 Equipment safety standard compliance

4.3 Electrical safety guidelines

4.3.1 Power supplies

4.3.2 Cabling

4.3.3 Protective earth

4.4 ESD safety guidelines

4.5 Envir onmental requireme nts

4.6 Additional information

Table of contents

List of figures

List of tables

5Overview

5.1 Product overview

5.2 Functional overview

5.2.1 LTE characteristics

5.2.2 Ethernet characteristics

5.2.3 Power supply characteristics

5.3 Variant overview

5.3.1 Variant label information

5.4 Physical interfaces

5.5 LED behavior

5.6 Power information

5.7 Performance info rmation

5.7.1 Throughput information

5.7.2 Power consum ption information

5.8 Standards certification