Nokia 3105 Service Manual 5rh48servtools
CCS Technical Documentation
RH-48 Series Transceivers
Service Tools
Issue 1 11/2003 Confidential ©2003 Nokia Corporation
RH-48
Service Tools CCS Technical Documentation
Contents
Page No
Model 3105 Service Tools............................................................................................. 3
Flashing, Testing, and Tuning .....................................................................................8
Point of Sales Flashing.............................................................................................. 9
Flash Programming Using Docking Station (JBV-1 and MJF-17)......................... 10
Covers-Off Troubleshooting Using Service Jig (MJ-23)........................................ 11
Automated Tuning and Alignment ............................................................................12
Automated Tuning and Alignment Equipment List................................................ 13
Page 2 ©2003 Nokia Corporation Confidential Issue 1 11/2003
RH-48
CCS Technical Documentation Service Tools
Model 3105 Service Tools
JBV-1 Docking Station MJF-17 Docking Station Adapter
0770298 0774282
The Docking Station and the Docking Station Adapter
are needed for Mbus, Fbus, RF, and audio connections.
This setup allows connection between flash prommers.
When the audio box is connected, it has to be connected to the phone’s audio connector. The Docking
Station can be powered by FPS-8 or external power
supply.
The docking station adapter enables tuning, testing,
and flashing.
CPL-8 RF Coupler RJ-32 Rework Jig
0770475 0770757
CPL-8 allows antenna testing at AMS locations.
Shield Box JSX-1A is required.
The rework jig is a PWB component that allows de-soldering and soldering.
Issue 1 11/2003 Confidential ©2003 Nokia Corporation Page 3
RH-48
Service Tools CCS Technical Documentation
JXS-1 Shield Box DKU-5F Flash Cable
0770346 0780738
The Shield Box allows RF radiated tests and antenna
testing. Contact the Americas AMS in Melbourne, FL
for more information on how to obtain one.
For use with the Spirent UPST and UMPP service software.
Note: The cable cannot be used as a straight through
USB connection cable.
FPS-8 Flash Prommer XCS-1 Service Cable
0080321 0730218
The Flash Prommer FPS-8 is used for flashing at service
centers with Phoenix service software.
This cable is required for FLS-4S operation if flash
adapter FLA-30 is used.
Note: This cable can be replaced with CA-22DS for bottom connector flashing.
Page 4 ©2003 Nokia Corporation Confidential Issue 1 11/2003
RH-48
CCS Technical Documentation Service Tools
XCS-4 General Purpose Cable CA-5S DC Service Cable
0730178 0730283
XCS-4 Service Cable is a modular cable for flashing
DCT4 products.
The DC Service Cable (CA-5S) connects the docking
station (JBV-1) to the charger connection (Vin) of the
phone to conduct EM calibration.
Note: CA-5S replaces the SCB-3 cable (0730114).
PCS-1 Power Cable FLC-20 Flash Device
0730012 0081544
The PCS-1 Power Cable is used to connect the service
tools to an external power supply.
This is a USB flash cable (per Verizon requirements). Kit
includes a detachable USB cable.
Note: FLC-20 requires DCT3 or DCT4 cable to handset.
Issue 1 11/2003 Confidential ©2003 Nokia Corporation Page 5
Loading...