Nokia 2865, 2865i User Manual

Nokia 2865 and Nokia 2865i User Guide

Part No. 9249438, Issue No. 1 Copyright ©2006 Nokia. All rights reserved. Nokia, Nokia Connecting People, Nokia 2865, Nokia 2865i, Pop-Port, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners.

Bluetooth wireless technology is a registered trademark of Bluetooth SIG, Inc.

Includes RSA BSAFE cryptographic or security protocol software from RSA Security.

Java is a trademark of Sun Microsystems, Inc.

The information contained in this user guide was written for the Nokia 2865 and Nokia 2865i products. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice.

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT AS RE QUIR ED BY APPL ICAB LE LAW , NO W ARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.

EXPORT CONTROLS

This device may contain commodities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited.

Copyright protections may prevent some images, music (including ringing tones), and the content from being copied, modified, transferred, or forwarded.

FCC/INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may

cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user’s authority to operate this equipment.

Contents

For your safety................................................................................... 5

Welcome............................................................................................. 8

1. Phone at a glance..................................................................... 9

2. Set up your phone.................................................................. 14

3. Text entry................................................................................ 21

4. Messaging ............................................................................... 24

5. Log........................................................................................... 40

6. Contacts .................................................................................. 44

7. Gallery ..................................................................................... 53

8. Media ...................................................................................... 56

9. Settings ................................................................................... 59

10. Organizer................................................................................. 81

11. Extras ...................................................................................... 93

12. Minibrowser............................................................................ 94

13. PC connectivity....................................................................... 97

14. Enhancements......................................................................... 98

15. Reference information ........................................................ 100

Care and maintenance ................................................................. 103

Additional safety information..................................................... 104

Index.............................................................................................. 110

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Do not use the phone at a refueling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.

PLAY SAFELY

Use of vibration can aggravate injuries. Do not turn vibration on if you have any ailment in the bones or joints of your fingers, hands, wrists, or arms.

For your safety

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACKUP COPIES

Remember to make back-up copies or keep a written record of all important information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.

■ About your device

The wireless device described in this guide is approved for use on the CDMA 800, CDMA 1900, and 800 AMPS networks, and may also receive signals from the global positioning system satellite network. Contact your service provider for more information about networks.

When using the features in this device, obey all laws and respect privacy and legitimate rights of others.

When taking and using images or videos, obey all laws and respect local customs as well as privacy and legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.

■ Network services

To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may

For your safety

have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as Mobile web require network support for these technologies.

■ Shared memory

The following features in this device may share memory: Messaging, Contacts,

Gallery, Organizer, and Extras. Use of one or more of these features may reduce

the memory available for the remaining features sharing memory. For example, saving many photos to the Gallery may use all of the available memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as Messaging and Contacts, may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.

Welcome

Congratulations on your purchase of this Nokia mobile phone. Your phone provides many functions which are practical for daily use, such as a hands-free loudspeaker, FM radio, and more. Your phone can also connect to a PC, laptop, or other device using a USB data cable, infrared, or Bluetooth wireless technology.

■ Getting help

Find your phone label

If you need help, the Nokia Care Contact Center is available for assistance. Before calling, we recommend that you write down the electronic serial number (ESN) or the mobile equipment ID (MEID) of your phone and have it available:

The ESN or MEID is found on the type label, which is located beneath the battery on the back of the phone. See "Remove the back cover," p. 15, and "Remove the battery," p. 15, for more information.

Accessibility solutions

Nokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. For more information visit the Web site at

http://www.nokiaaccessibility.com.

Additional information

Check http://www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and service related to your Nokia product.

1. Phone at a glance

■ Keys and parts

Earpiece port (1)

Display screen (2)

Four-way scroll and center selection key (3)

Right selection key (4)

Power key and end key (5)

Keypad (6)

Pop-Port™ connector (7)

Microphone (8)

Charger port (9)

Call key (10)

Left selection key (11)

2.5 mm Headset connector (12)

Loudspeaker (13)

Voice command key (14)

Infrared (15)

Phone at a glance

Volume key(16)

Phone at a glance

■ Standby mode

Depending on your wireless service provider and the model number of your phone, some or all of the following selection keys may appear in the standby mode.

The standby mode is home base and indicates your phone is idle.

Signal strength (1)—More bars indicate a stronger network signal.

Menu (2)—Press the center selection key to

select this option.

Go to (3)—Press the left selection key to select this option.

Names or network operator menu (4)—Press the right selection key to select this

option.

Battery level (5)—A filled-in battery icon indicates a fully charged battery.

■ Shortcut keys

Depending on your wireless service provider and your phone, some or all of the following scroll key shortcuts may be available in the standby mode.

In the standby mode, the four-way scroll and center selection keys instantly take you to frequently accessed menus:

Scroll up—Go to the contacts list or network operator menu.

Scroll right—View the calendar.

Scroll down—Go to the contacts list.

Scroll left—Create a text message.

Center selection key—Selects menus and submenus to which you have scrolled.

■ Indicators and icons

To identify all the icons on your phone, select Menu > .Settings > Phone details >

Icon details.

Phone at a glance

■ Phone menus

Phone features are grouped according to function and are accessed through the main menus. Each main menu contains submenus and lists from which you can select or view items and customize your phone features. You can access these menus and submenus by using the scroll method or by using a shortcut.

Note: Some features may not be available, depending on your network. For more information, contact your wireless provider.

Scroll method

You can use the four-way scroll key to scroll up, down, left, and right through the options.

1. To select Menu, use the center selection key. To scroll through the main menu, use the scroll key.

As you scroll through the menus, the menu number appears in the upper right corner of the display. Below the battery level indicator is a scroll bar with a tab that moves up or down on the right side of the display screen as you scroll through the menus, providing a visual representation of your current position in the menu structure.

2. When you arrive at a menu, press the center selection key to enter submenus.

Select Back from the submenu level to return to the previous menu.

Press the end key to return to the standby mode from any menu or submenu.

Main menu display

You can control whether your phone main menu is displayed as a List, or Grid. By default, the main menu displays in Grid format.

Select Menu > Options > Main menu view > List or Grid.

If supported by your wireless service provider, you can also change the order of menus in your main menu.

Select Menu > Options > Organize. Scroll to a menu, select Move. Use the scroll key to move the menu to a new location, select OK. You can repeat the procedure to customize your main menu.

Phone at a glance

In-phone help

Many features have brief descriptions (help text) that can be viewed on the display. To view these descriptions, scroll to a feature, and wait for about 15 seconds. Scroll down to view all of the description, or select Back to exit.

In order to view the descriptions, you must activate help text. See "Help text activation," p. 68.

■ Security feature

The security feature protects your device from unauthorized outgoing calls or denies access to stored information with a lock or security code. The lock code is a four-digit number, while the security code is a five-digit number. By default, the security feature uses the lock code (defaulted to 0000, 1234, or the last four digits of your phone number) to protect your phone.

To access the Security menu, do the following:

1. Select Menu > Settings > Security.

2. Enter the lock code, and select OK. See "Security," p. 74 for more information.

Note: Depending on your wireless service provider, the preset lock code may be 1234 or 0000 instead of the last four digits of your phone number. If none of these work, contact your wireless service provider for

more help.

To restore the factory settings, do the following:

1. Select Menu > Settings > Restore settings.

2. Enter the lock code, and select OK.

Note: Depending on your wireless service provider, your phone may ask for the security code (default setting of 12345 or 00000) instead of the lock code.

■ Go to functions

The Go to menu allows you to change the function of the left selection key on your phone so that your most frequently used functions can be quickly accessed from the Go to menu in the standby mode.

Select options

1. Select Go to > Options > Select options.

Phone at a glance

2. Scroll to the options you want to add.

3. Select Mark to add an option or Unmark to remove an option.

4. Select Done when you have added all desired options.

5. Select Yes to save the changes.

6. Select Go to to display a list of the options that you selected in step 3.

Organize functions

Select Go to > Options > Organize. Scroll to an option, select Move. Scroll to move the option to a new location, and select OK. You can repeat the procedure to customize your Go to menu.

Select Done > Yes to save the changes.

Set up your phone

2. Set up your phone

■ Antenna

Your device has an internal antenna.

Hold the device as you would any other telephone with the antenna area pointed up and over your shoulder.

Note: As with any other radio transmitting device, do not touch the antenna area unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life.

■ Battery

Note: Always switch off the power, and disconnect the charger and any

other device before removing the cover. Avoid touching electronic components while changing the cover. Always store and use the device with the cover attached.

Prolonged, continuous use of your device may increase the device temperature. The increased temperature is a normal function of this product and does not pose a safety concern for you or the device. If the temperature is uncomfortable to you, use a headset or allow your device to return to room temperature before your next call.

Set up your phone

Remove the back cover

Slide the back cover toward the bottom of the phone, then lift the cover up and remove it.

Remove the battery

After you remove the back cover, insert your finger into the finger grip, and lift the battery from its compartment.

UIM (CDMA SIM) card slot

Your phone may have a built-in UIM card slot. However, the UIM is not functional in this phone model. Avoid placing anything into the UIM card slot.

Replace the battery

1. Insert the battery, gold-colored contact end first, into the battery slot.

2. Push down on the other end of the battery to snap the battery into place.

Set up your phone

Replace the back cover

1. Set the back cover on the phone with the cover tabs aligned with the slots in the phone.

2. Slide the back cover toward the top of the phone until the back cover is securely in place.

Charge the battery

1. Plug the charger transformer into a standard ac outlet.

2. Insert the charger output plug into the round jack at the bottom of the phone.

If necessary, you can use a CA-44 adapter cable (1) to connect a charger and the phone.

After a few seconds, the battery indicator in the display scrolls. If the battery is completely discharged, it may take a few minutes

Set up your phone

before the charging indicator appears on the display or before any calls can be made.

■ Turn your phone on or

off

1. To turn your phone on or off, press and hold the end key for at least 3 seconds.

2. Enter the lock code, if necessary, and select OK.

■ Connect the headset

A compatible headset, such as HS-5, may be purchased with your phone or separately as an enhancement. See "Enhancement settings," p. 73 for information.

1. Plug the headset connector into the Pop-Port™ connector at the bottom of your phone. appears on the display.

2. Position the headset on your ear.

With the headset connected, you can make, answer, and end calls as usual.

• Use the keypad to enter numbers.

• Press the call key to place a call.

• Press the end key to end a call.

You can also plug a compatible headset, such as the such as the HS-9 Universal Headset, into the into the 2.5-mm headset jack on the side of your phone to allow hands-free operation. See "Enhancement settings," p. 73.

Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety.

Set up your phone

■ Make calls

Keypad

1. Enter the phone number (including the area code), and press the call key. To delete a character to the left of the cursor, select Clear.

2. To end the call, press the end key. To cancel the call attempt, select End call.

Save contact option

1. Enter the phone number (including the area code) and select Save, enter a name for the contact, and select OK.

2. To make the call, press the call key. To return to the standby mode, select

Done.

Contacts list

1. Scroll down to display your contacts.

2. Scroll to the contact you wish to dial, and press the call key. To view details of the entry, select Details.

Use the last dialed number

1. Press the call key to display the last 30 numbers dialed.

2. Scroll to the number or name you wish to redial, and press the call key.

Make a conference call

Conference calling is a network service that allows you to take part in a conference call with two other participants.

1. Make a call to the first participant.

2. With the first participant on the line, select Options > New call.

3. Enter the phone number of the second participant; or, to retrieve a number from your contacts, select Search and the contact you want to call.

4. Press the call key. The first participant is put on hold.

5. When the second participant picks up, press the call key to connect the calls.

Set up your phone

6. To end the conference call, select Options > End all calls, or press the end key.

■ Answer calls

Answer or silence an incoming call

1. To answer the call, press the call key or select Answer.

2. To reject the call, press the end key.

Select Silence to mute the ringing tone. Select Dismiss or do nothing, and the call is eventually forwarded to voice mail.

If your phone is set to Silent in the Profiles menu, select Dismiss, and the call is forwarded to voice mail.

Adjust the earpiece volume

Whether in or out of a call, you can scroll the volume key located on the left side of your device up or down to adjust the volume of the earpiece. When you adjust the volume, a bar chart indicates the volume level.

Answer a call with the keypad locked

To answer a call with the keypad locked, press the call key.

During the call, all features function normally. When you end or reject the call, the keypad automatically relocks. See "Keyguard," p. 20 for details.

When the device is locked, calls may be possible to the official emergency number programmed into your device.

Use the loudspeaker

Warning: Do not hold the device near your ear when the loudspeaker is

in use because the volume may be extremely loud.

You can use your phone loudspeaker during a call:

• To activate the loudspeaker, select Loudsp.

• To deactivate the loudspeaker, select Normal.

The loudspeaker is deactivated automatically when a call or a call attempt ends or when certain enhancements are connected.

Set up your phone

Mute phone during call

To mute your phone during a call, select Mute; to unmute the phone, select

Unmute.

Options during a call

Many of the options that you can use during a call are network services. Check with your wireless service provider for more information.

During a call, select Options and one of the following:

Loudspeaker or Normal—Activate or deactivate the loudspeaker while in a call.

New call—Initiate a conference call. See "Make a conference call," p. 18 for

information.

Save—Save a number entered during a call.

Add to contact—Add a number entered during a call to a contact in your list.

End all calls—Disconnect from all active calls.

Touch tones—Enter the numbers, and select Tones to send the numbers as tones.

Contacts—View the contacts list.

Menu—View the phone menu.

■ Keyguard

With keyguard, you can lock the keypad to prevent keys from being pressed accidentally. Remember to lock your phone keypad to prevent accidental calls or activation of features. If the keypad is locked, it unlocks when you receive a call. After the call, the lock automatically reactivates.

When the keyguard is on, calls may be possible to the official emergency number programmed into your device.

• To unlock the keypad, select Unlock, and press * within 2 seconds.

• To lock the keypad, select Menu, and press * within 2 seconds.

Text entry

3. Text entry

You can use two methods for entering text and numbers: standard mode and predictive text mode.

■ Standard mode

Standard mode is the only way to enter text into the contacts list, and to rename caller groups.

Text (Abc)

• Press a key once to insert the first letter on the key, twice for the second letter, etc. If you pause briefly, the last letter in the display is accepted and your phone awaits the next entry.

• Press 0 to enter a space, thereby accepting a completed word.

• Press 1 as many times as necessary to scroll through a list of commonly used characters.

• Press * to display a complete list of special characters.

• Press and hold # to open Editor settings, and select Number mode, Prediction

on or Prediction off, or Writing language.

Numbers (123)

To switch to 123 mode from Abc mode, press and hold # at any message entry screen to open the Editor settings. Select Number mode, and the device returns to the message entry screen and switches the ABC icon in the upper left corner of the display to the 123 icon (or back). To return to Abc mode, press and hold #.

Change language

To change the language, do the following:

1. Press and hold # to open the Editor settings menu list.

2. Select Writing language and the new language.

The phone will return to the message entry screen, and you can write in the new language.

Text entry

Punctuation and special characters

While at any text entry screen, press * to display special characters (press and hold * if predictive text is on). Press * again to cycle through all available characters. Scroll to navigate through the list of special characters. Once a character is highlighted, select Insert to insert the character into your message.

■ Predictive text mode

Predictive text input allows you to write messages quickly using your keypad and the built-in dictionary. It is much faster than the standard mode method, because for each letter, you only press the corresponding key on your keypad once.

Activate or deactivate

At any text entry screen, select and hold Options to turn predictive text on or off depending on previous mode, or select Options > Predictive text > Predi ction on or Prediction off. Press # twice to change from predictive text mode to standard mode and back.

Enter text

The illustration below simulates your display each time a key is pressed. For example, to write ’Nokia’ with predictive text on and with the English dictionary selected, press each of the following keys once:

6 6 5 4 2

Press 0 to enter a space and begin writing the next word. If a displayed word is not correct, press * to see other matches. To return to the previous word in the list of matches, select Prev.

If ? appears after a word, it is not in the dictionary. Select Spell to add the word to the dictionary.

Press 1 to insert a period into your message.

Press and hold:

• * to display special characters. Press * again to cycle through all available characters.

Text entry

• the specific number key to enter a number.

• # to select Editor settings > Number mode, Predi ction on or Prediction off, or

Writing language.

■ Change case and mode

Press # to switch between uppercase, lowercase, and sentence case, as well as standard and predictive text modes. Case and mode are indicated by the following icons that appear in the upper left of the display screen.

Uppercase text: standard mode is on.

Lowercase text: standard mode is on.

Sentence case text: standard mode is on. Only available at the beginning of a sentence.

Uppercase text: predictive text is on.

Lowercase text: predictive text is on.

Sentence case text: predictive text is on. Only available at the beginning of a sentence.

■ Delete text

To delete text:

• select Clear to backspace the cursor and delete a character, or

• select and hold Clear to backspace continuously and delete characters.

Messaging

4. Messaging

Your phone can create and receive text, multimedia, voice and minibrowser messages. Check with your service provider to see what messaging is available for you.

■ Text messages

Text messaging is a network service. See "Network services," p. 6, for more information. If your wireless service provider supports this feature, you can send and receive text messages to compatible phones that are also subscribed to the service.

When you write messages, the number of characters used is displayed on the upper right of the screen. Special (unicode) characters take more space than is indicated. Before the message is sent, a prompt will indicate whether the message is over the maximum length. Also, you can make distribution lists that contain phone numbers and names from your contact list. See "Distribution lists," p. 36 for more information.

Note: When sending messages, your device may display Message sent. This is an indication that the message has been sent by your device to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.

Text message folders and options

Select Menu > Messaging > Text messages and from the following:

Create message—Create and send messages.

Inbox—Check for received text messages. Text messages are automatically stored

in the Inbox when they are received. A notification appears when a message arrives in the Inbox.

Outbox—Check for outgoing text messages. Text messages are automatically

stored in the Outbox as they are sent. If your service is interrupted while sending, the text message is stored in the Outbox until another delivery attempt is made.

Sent items—Sent text messages are stored in Sent items.

Drafts—View the list of messages saved for additional work.

Messaging

Archive—View the list of saved messages for later reference.

Templates—Select from a collection of prewritten Templates, when creating text

messages. Preloaded Templ ates can be edited and customized.

My folders—Create and name personal folders.

Delete messages—Delete messages from a selected folder or all folders.

Message settings—Change settings to read, write, and send text messages.

Send numeric page—Send a message with a number to which to return a call.

Write and send text messages

1. Select Menu > Messaging > Text messages > Create message.

To go quickly to the Create message screen from the standby mode, scroll left.

2. Compose a text message using the keypad. See "Choose a text message option," p. 26, for options in composition.

3. Select Send to > Recently used, Send to number, Send to e-mail, Send to

many, or Send to distrib. list (if you have created one).

4. Select a number or distribution list, enter the recipient’s phone number or e-mail address, or select Search to retrieve a number or e-mail address from your contacts list; select Send.

Use a template

Templates are short, prewritten messages that can be retrieved and inserted into new text messages.

Select Menu > Messaging > Text messages > Create message > Options > Use

template, and select one of the available templates. Use the keypad to complete

the text message.

Read and reply to text messages

When you receive a text message, a notification appears and the unopened letter icon ( ) is displayed.

1. Select Show to read the text message or Exit to dismiss the notification.

Scroll to view the whole message, if necessary.

When unopened messages are in your inbox, is shown in the upper left corner in the standby mode as a reminder.

Messaging

2. Select Reply > Empty screen, Original text, Template , or one of the predefined answers provided.

3. Compose your reply with the keypad, and select Send.

Choose a text message option

Create message options

When you create or reply to a text message, depending on the mode of text input you use and the features supported by your wireless service provider, some or all of the following are available:

Sending options—Mark or Unmark a message as Urgent, Delivery note, Callback no., or Signature.

Clear text—Erase all text from your message.

Insert contact—Insert detail from your contacts list into your message.

Insert number—Insert a phone number or find a phone number in the contacts

list.

Save—Save the message in Drafts.

Exit editor—Exit the message editor.

Use template—Insert a predefined template.

Insert smiley—Insert a smiley.

Insert word or Edit word—Enter or edit the text of a new word that might not

appear in the predictive text dictionary. This is displayed only when predictive text is on.

Insert symbol—Insert a special character. This is displayed only when predictive

text is on.

Writing language—Select the language used for text input.

Prediction on —Turn predictive text on or off, and select the language used for

predictive text.

Read message options

When you read a text message, the following options are available:

Delete—Discard the text message.

Message details—View the details of the text message.

Use detail > Number, E-mail address, or Web address—Select Save to create a

new contact; select Options > Add to contact, Send message, or Call for other

Messaging

options. See "Save other details," p. 46, to create and save details for a new contact.

Move—Save the message to Archive, Templates, or a folder you have created.

Forward—Forward the text message to another phone number.

Lock or Unlock—Lock or unlock the text message. The appropriate option appears.

Rename—Edit the title of the text message.

Use custom folders

Your phone has a folder system that saves and stores text messages. Additionally you can create custom folders.

Create a custom folder

To organize your messages, create custom folders, and save messages you want to keep there.

1. To create your initial custom folder select Menu > Messaging > Text

messages > My folders > Add fold.

2. Enter a name for the new folder, and select OK.

3. To create an additional custom folder, select Menu > Messaging > Text

messages > My folders > Options > Add folder.

Rename a custom folder

1. Select Menu > Messaging > Text messages > My folders.

2. Scroll to the folder you wish to rename, and select Options > Rename folder.

3. Select and hold Clear to delete the existing entry, and enter a new name for the folder.

4. Select OK to confirm or Back to exit.

Delete a custom folder

Only folders in My folders can be deleted. The Inbox, Outbox, Sent items, Drafts,

Archive, and Templates folders are protected. When you delete a folder, all

messages in the folder are also deleted.

Select Menu > Messaging > Text messages > My folders, scroll to the folder you wish to delete, and select Options > Delete folder > Yes or No.

Messaging

Delete text messages

If your message memory is full and you have more text messages waiting at the network, blinks in the standby mode. You can do the following:

• Read some of the unread text messages, and delete them.

• Delete text messages from some of your folders.

Delete a single text message

To delete a single text message, you must open it.

1. Select Menu > Messaging > Text messages.

2. Select the folder containing the text message you wish to delete.

3. Select and open the message you wish to delete and Options > Delete.

4. Select Yes to delete the message or No to exit.

Delete all messages in a folder

1. Select Menu > Messaging > Text messages > Delete messages and one of the following:

All—Deletes all text messages in the folder.

All read—Deletes only the read text messages in the folder.

All unread—Deletes all unread text messages in the Inbox.

2. If you select All or All read, select Mark or Unmark to choose the folders from which to delete text messages. Select Options > Mark all to choose all folders.

3. Select Done after choosing the folders.

4. Select Yes to delete the message or No to exit.

Text message settings

Sending options

Select Menu > Messaging > Text messages > Message settings > Sending

options . and the setting or settings you wish to change:

Priority > Normal or Urgent—to mark the priority of the message

Delivery note—to receive a note confirming delivery of a text message

Send callback number > On—to send your default phone number to the recipient

Messaging

Signature—to append a signature to an outgoing text message. If you have not

created a signature, select On; enter a signature, and select OK.

Other settings

Select Menu > Messaging > Text messages > Message settings > Other settings and the setting you wish to change:

Message font size—Select the desired font size for the display.

Message overwriting > Sent items only, Inbox only, S. items & Inbox, orOff—Set

your phone to automatically replace old messages in Inbox or Sent items when new ones arrive. When the message memory is full, your phone cannot send or receive any new messages.

Save sent messages—Select Always save or Always prompt to save s ent text

messages to Sent items. Select Off to not save messages.

Auto-playback of sounds—If you have enhanced text messaging, select On or Off

to control sound clips.

Queue msgs. if no digital—Select On or On prompt to store text messages in the Outbox until they can be sent with a digital service. Select Off to not store

messages.

■ Multimedia messages

Multimedia messaging is a network service. See "Network services," p. 6, for more information. If your wireless service provider supports this feature, you can send and receive multimedia messages to compatible phones that are also subscribed to the service.

A multimedia message can contain text, sound, a picture, or a video. Your phone supports multimedia messages that are up to 300 KB. If the maximum size is exceeded, the phone may not be able to receive the message.

Depending upon your network, you may receive a message that includes an internet address where you can go to view the multimedia message. Pictures are scaled to fit the display area of the phone. Your phone has a multimedia message viewer for playing messages and a multimedia inbox for storing saved messages. Once you save the multimedia message, you can use the image as a screen saver or the sound as a ringing tone.

Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. The wireless network may limit the size of multimedia messages. If the

Messaging

inserted picture exceeds this limit, the device may make it smaller so that it can be sent by multimedia message.

Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.

Multimedia messaging supports the following formats:

• Picture: JPEG, GIF, animated GIF, BMP, and PNG

• Sound: MP3, eAAC+, SP-MIDI, AMR audio, QCELP, and monophonic ringing tones

• Video: clips in 3g2 or 3gp format in QCIF image size

You cannot receive multimedia messages if you have a call in progress, games or other applications running, or an active browsing session. Because delivery of multimedia messages can fail for a variety of reasons, do not rely solely upon them for essential communications.

Multimedia message folders and options

Select Menu > Messaging > Multimedia messages. and from the following:

Create message—Create and send multimedia messages.

Inbox—Check for received multimedia messages. Multimedia messages are

automatically stored in the Inbox when they are received. You receive a notification when a message arrives in your Inbox.

Outbox—Check for outgoing multimedia messages. Multimedia messages are

automatically stored in the Outbox as they are sent. If your service is interrupted while sending, then messages are stored in the Outbox until another delivery attempt is made.

Sent items—Sent multimedia messages are stored in Sent items.

Saved items—Save multimedia messages for later use in Saved items.

Delete messages—Delete multimedia messages from the Inbox, Outbox, Sent items, or Saved items.

Message settings—Change the settings for multimedia messages.

Write and send multimedia messages

1. Select Menu > Messaging > Multimedia msgs. > Create Message.

2. Compose a message using the keypad. See "Choose a multimedia message option," p. 32, for composing options.

+ 84 hidden pages