Nokia 282 User Manual

LED indicator
Flashes fast for incoming calls. Flashes slowly when phone is in service.
OK
Confirms and selects choices on display. Finds a Phone Book entry by name.
MENU
Enters the menu.
SEND
Dials the phone number on the display. Answers a call.
0-9, @, and #
Number and character keys.
Scrolls through menu functions and Phone Book. Adjusts earpiece volume during a call. When held, scrolls continuously.
Retractable antenna
(not visible -­extend fully during calls
)
CLR
Erases characters or clears display. Backsteps one menu level.
Profiles
Selects a profile (group of preset sound settings). During a call, adjusts earpiece volume.
END
Ends the call. When not in a call, exits the current function and clears the display. Activates Keyguard when pressed and held.
PWR
A long press turns the phone on or off. A short press stops the phone’s ringing without answering the call.
#
Shows the Life Timer when pressed and held.

Contents

1. For Your Safety . . . . . . . . . . . . . . . . . . 1
2. Quick Start . . . . . . . . . . . . . . . . . . . . . 3
Opening the phone cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Making your first call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Changing the Profile (sound settings) . . . . . . . . . . . . . . . . . 3
Volume adjustment of earpiece. . . . . . . . . . . . . . . . . . . . . . . 3
Using the cover to answer and end calls . . . . . . . . . . . . . . . 4
The Ready screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Quick Save (saving Phone Book entries). . . . . . . . . . . . . . . . 4
Quick Find (finding Phone Book entries) . . . . . . . . . . . . . . . 4
3. Display Indicators. . . . . . . . . . . . . . . . . 5
4. Battery Information . . . . . . . . . . . . . . . 7
Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Removing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Important Battery information . . . . . . . . . . . . . . . . . . . . . . 10
5. The Basics . . . . . . . . . . . . . . . . . . . . . 12
Opening the phone cover. . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Switching the Phone on and off. . . . . . . . . . . . . . . . . . . . . 12
Welcome note. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Selecting a network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Ending a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Answering a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting the earpiece volume . . . . . . . . . . . . . . . . . . . . . . 16
Last number redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
1-Touch dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Emergency 9 dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Keyguard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Selecting the Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Calling card calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PIN calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Voice and text messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
i
6. The Phone Book . . . . . . . . . . . . . . . . . 23
Saving entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Viewing entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Using the Notepad memory . . . . . . . . . . . . . . . . . . . . . . . . 27
Moving an entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Erasing an entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Editing an entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using the VIP feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
7. Menu features . . . . . . . . . . . . . . . . . . 29
Menu summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Accessing the menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Phone Book (Menu 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Call Log (Menu 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Phone Settings (Menu 3) . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Security Settings (Menu 4). . . . . . . . . . . . . . . . . . . . . . . . . 41
Call Settings (Menu 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Lock Phone (Menu 6). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Messages (Menu 7). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
8. Data and Touch Tones . . . . . . . . . . . . . 52
Data Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Sending touch tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Using the Flash function. . . . . . . . . . . . . . . . . . . . . . . . . . . 54
9. Network Services . . . . . . . . . . . . . . . . 56
Availability of network services . . . . . . . . . . . . . . . . . . . . . 56
Calling Line Identification. . . . . . . . . . . . . . . . . . . . . . . . . . 56
Call Waiting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Message Waiting (Voicemail). . . . . . . . . . . . . . . . . . . . . . . 58
Digital Message Service (Nokia 282 NAMPS only) . . . . . . 59
10. Accessories . . . . . . . . . . . . . . . . . . . 61
11. Reference Information . . . . . . . . . . . . 66
12. Troubleshooting . . . . . . . . . . . . . . . . 72
13. Technical Information . . . . . . . . . . . . 73
14. Warranty . . . . . . . . . . . . . . . . . . . . . 74
15. Index . . . . . . . . . . . . . . . . . . . . . . . 77
ii

1. For Your Safety

Read these simple guidelines before using your phone. Failure to comply with these guidelines may be dangerous or illegal.
For more detailed safety information, see “Important Safety Information” on page 66.
Road Safety Comes First
Don’t use a hand-held phone while driving; park the vehicle first.
Switch Off In Hospitals
Follow any regulations or rules. Switch phone off near medical equipment.
Switch Off On Aircraft
Mobile phones can cause interference. Using them on aircraft is illegal.
Switch Off When Refueling
Don’t use phone at a refueling point. Don’t use near fuel or chemicals.
Switch Off Near Blasting
Don’t use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.
Interference
All wireless phones may get interference which could affect performance .
Use Sensibly
Use only in the normal position (to ear). Don’t touch the antenna un nec ess ar ily.
Qualified Service
Only qualified service personnel must install or repair equipment.
Accessories and Batteries
Use only approved accessories and batteries. Do not connect incompatible products.
1
For Your Safety

FCC/Industry Canada Notice

Your phone may cause TV or radio interference (e.g. when using a telephone in close proximity to receiving equipment). The FCC/Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility.
This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Using this Guide

The wireless phone described in this guide is approved for use in AMPS and NAMPS networks.
A number of features included in this guide are called Network Services. They are special services provided by wireless service providers. Before you can take advantage of any of these Network Services, you must subscribe to the service(s) from your home service provider and obtain instructions for their use .
For Your Safety
2

2. Quick Start

Opening the phone cover

To prolong the life of your phone, hold it in one hand while opening the cover with the other hand.

Making your first call

1 Install and charge the battery (see “Battery
Information” on page 7).
2 Give PWR a long press to switch on your
phone. Wait for the signal indication to appear.
3 Enter the area code (if needed) and the phone
number, then press SEND.
4 To end the call, press END or close the cover.
Note: If you make a mistake entering the phone number, to clear the last digit give the entire numb er, g ive

Changing the Profile (sound settings)

You can easily change the profile, which is a set of predefined sound and alert settings. (This is simpler and quicker than changing these sound settings using the menu.)
Press repeatedly until the profile you want is next to the pointer, then press and hold the Profile key (or press OK).
description of the Profiles.
Note: You cannot change the profile when in a call.
CLR a short press, or to clear
CLR a long press or press END.
See page 18 for a

Volume ad justment of earpiece

When in a call, to increase volume, give a short press, or to decrease volume give a long press. Or, press the or keys.
3
Quick Start

Using the cover to answer and end calls

You can answer incoming calls by opening the cover if the Active Cover menu feature is set to On. (See “Active Cover (Menu 3 12)” on page 40).
Note: To prolong the life of your phone, hold it in one hand while opening the cover with the other hand.
You can end a call by closing the cover.

The Ready screen

When you see the term “Ready screen” in this manual, it means the phone’s display is free of phone numbers, names, and menu items. Many of the functions require that you start with the “Ready screen”. To do this:
Give END a (short) press, or CLR a long press. (Don’t press END to return to idle when in a call because this will end the call.)
Status indicators such as KEYGUARD ACTIVE,
ROAMING, or the name of the profile you’re using may
appear on the Ready screen and can’t be cleared.

Quick Save (saving Phone Book entries)

1 At the Ready screen, enter t he area code (i f
needed) then the phone number, then press OK.
2 At the Save Name: prompt, enter the name
then press OK twice.
Note: It’s better to use short names (i.e., no more than 10 characters). Entries with short names and numbers fit on a single screen in the Phone Book.
For more details, see “The Phone Book” on page 23.

Quick Find (finding Phone Book entries)

1 At the Ready screen, press OK. 2 At the Find name: prompt, enter the first
letter(s) of the name then press OK.
Quick Start
4

3. Display Indicators

ABC
AB
Shows which
type
of system your phone will use when it is roaming (see also the t a bl e “System selection and display indicators” on page 47).
Your phone is using the Home system (see also the table “System selection and display indica­tors” on pa ge 47).
You have an active call. You can enter letters or view na mes. You have one or more voice messages waiting. You have one or more text messages wait ing.
Blinks when Messages list is full. Indicates m en u , or Phone Boo k location num-
ber, or number of unheard voice messages. and bar indicate the cellular signal strength at
the location where you are using your phone. and bar indicate the battery charge level.
When the battery is fully charged, the whole bar is displaye d.
Points to an item which may be selected (scroll to choose another item) - press OK to select.
Indicates overflowing menu items or Phone Book entries (scroll to view the next or previous screen).
5
Display Indicators
Signal strength indication
A cellular phone sends and receives radio signals. As with all radio equipment, the quality of radio reception depends on the strength of the radio signal in the area wher e you are operating your phone.
The strength of the cellular signal is shown by the vertical bar on the left­hand side of the display. The higher the bar, the stronger the signal at your present location, and the more likely you are to get good call quality.
When NO SERVICE is displayed, the phone is either outside of the cellular service area or restricted from entering serv i c e , and calls cannot be made or received.
If the signal is poor and you are using the phone in a building, you may get better reception near a window.
IMPORT ANT!
only when:
The phone can make and receive calls
• It is switched on, and
• It is located in the cellular service area, and the radio signal strength is adequate.
To make an emergency call
, see "Emergency Calls"
on page 69.
Display Indicators
6

4. Battery Information

Your phone is powered by a rechargeable Lithium­Ion battery. Use only batteries approved by the phone manufacturer a nd recharge your ba ttery only with the chargers approved by the manufacturer. See “Important Battery information” on page 10.
Note: A new battery must be charged before use.

Installing the Battery

1
3
2
1 Slide the battery cover down slightly, then lift
it off.
2 Put the battery in the space on the back of the
phone. Align the battery contacts with the contacts in the phone.
3 Put the battery cover in the guides on the
phone, then slide it into position.
7
Battery Information

Charging the Battery

1 Connect the lead from the charger to the bottom
of your phone, or place the phone in the Compact Desktop Charging Stand (optional accessory).
Note: See the “Accessories” section starting on page 61 for more charging options.
2 Plug the charger into a standard wall outlet.
When charging starts, the segments of the battery indicator scroll and the phone beeps once.
After the segments of the battery indicator stop scrol­ling and all segments are displayed, the battery is fully charged.
Charging times (specified below) depend on the charger used.
3 Disconnect the charger from the power outlet
and phone.
You can use the phone during charging, but charging is reduced for the duration of the call.
Note: In a call, charging stops completely if you are using the Standard Travel Charger (ACP-7U).
If the battery is too hot or cold, the charging may be interrupted until the battery reaches its nor­mal operating temperature.
Charging times
The battery charging times shown in the follow­ing table are approximate
Standard
Travel Charger
ACP-7U
Rapid Travel
Charger ACP-9U
.
Rapid Cigarette Lighter Charger
LCH-9
4 hours 2 hours 2 hours
Battery Information
8
Talk and Standby times
Battery operation times depend greatly on how you use the phone, as well as on the coverage of the network and network parameters set by the wireless service provider. Typical times are shown in the table.
Talk Time Standby Time
100 minutes 24 hours
Battery Low warning The phone says BATTERY
LOW and gives a warning
tone when the battery charge is low and only a few minutes of talk time remain.
The repetition rate of the battery low warnings depends on the remaining battery capacity and the battery condition.
When the battery charge is too low for the phone to work, the phone displays RECHARGE BATTERY, then beeps, then shuts itself off.
Charge the battery as described earlier in this section.
9
Battery Information

Removing the Battery

1
2
Note: Switch off the phone’s power before removing the battery!
1 Slide the battery cover down slightly, then lift
it off.
2 Lift the battery out.

Important Battery information

• Use only batteries and chargers approved by the phone manufacturer.
• When a charger is not in use, disconnect it from the power source. Do not leave the bat­tery connected to a charger for longer than a week, since overcharging may shorten its life.
• If left unused, a fully charged battery may lose some if its charge over time.
• Never use any charger or battery that is dam­aged or worn out.
• Use the battery only for its intended purpose.
• Do not short circuit the battery. Accidental short circuiting can occur when a metallic object (e.g. coin, clip or pen) causes direct
Battery Information
10
connection of the + and - terminals of the battery (metal strips on the side of the battery), for example, when you carry a spare battery in your pocket or purse. Short circuit­ing the terminals may damage the battery or the connecting object.
• Leaving the battery in hot or cold places, such as in a closed car in summer or winter condi­tions, reduces the capacity and lifetime of the battery. Always try to keep the battery between 59°F and 7 7° F (1 5° C and 25°C). A phone with a hot or cold battery may tem­porarily not work, even if the battery is fully charged, or it may temporarily not charge. Li-Ion battery performance is particularly lim­ited in temperatures below 32°F (0°C).
• Temperature extremes affect the ability of your battery to charge; allow it to cool down or warm up first.
• When the battery is not in use, store it uncharged in a cool, dark and dry place.
• The battery is a sealed unit with no service­able parts. Do not attempt to open the case.
• The battery can be charged and discharged hundreds of times but will eventually wear out. When the operating time is shorter than normal, it is time to buy a new battery.
• Do not dispose of a battery in a fire!
• Dispose of used batteries in accordance with any local laws and regulations.
11
Battery Information

5. The Basics

Opening the phone

To prolong the life of your phone, hold it in one hand while opening the cover with the other hand.

Switching the Phone on and off

Press the PWR key for about one second. If Keyguard is active, you need to deactivate it
before you can turn the phone off. If the display shows LOCKED, press MENU and
enter your 4-digit lock code.

Welcome note

Your dealer may have stored a welcome note in your phone (such as the dealer’s name). If not, your phone number is displayed. If you want to replace the dealer’s welcome note with your own, see “Welcome Note (Menu 3 14)” on pag e 40.
Note: The welcome note is specific to your currently selected phon e number.

Selecting a network

Your phone operates on specific networks and sometimes it must choose which system to use. This can happen, for example, if you leave the area where you have signed up for service.
If you want your phone to work only in certain types of networks (for example, to take advan­tage of certain billing agreements between sys­tems), you can specify this using “Carrier Selection (Menu 5 2 1)“. See page 45.

Making a call

1 Extend the phone’s antenna fully.
The Basics
12
2 Enter the area code (if needed) and the phone
CALL
number, then press SEND. If you make a mistake dialing, press CLR to erase digits one by one. Press and hold CLR or press END to clear the whole display.
A phone symbol appears on the display. The call is connected when the phone number disappears from the display and CALL appears.
For international calls
: You can enter a ‘+’ at the beginning of a number by pressing @@. Then enter the country code and number, then press SEND. The ‘+’ expands to the international dial­ing code prefix.
To dial a number stored in the Phone Book
: From the Ready screen press or until the Phone Book entry is displayed, then press SEND.
To make an emergency call
: See "Emergency
Calls" on page 69. NO SERVICE appears and the phone beeps if you
try to make a call when your phone is outside the cellular service area.
CALL NOT ALLOWED appears if you try to make a call that is restricted (see “Allowed Calls (Menu 5 2 2)” on page 47), or the phone is locked.
If you receive a call when you’re trying to make a call, the incoming call comes through and the outgoing call is cancelled.
NORMAL POSITION: Hold the phone as you would any other telephone, with the antenna pointed up and over your shoulder.
TIPS ON EFFICIENT OPERATION: Extend your antenna fully when in calls. As with any other radio transmitting device, avoid unnecessary contact with the antenna
13
The Basics
when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.
WARNING! Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.

Ending a call

Press#END, or
Close the cover, or
If you’re using the headset (HDC-3P), press
the answer/end button on the headset cord.
Note: If you give END a long press, you’ll activate Keyguard (see “Keyguard” on page17).

Answering a call

Press SEND, or any key except END or PWR,
or
Open the cover if Active Cover is On. (See "Active Cover (Menu 3 12)" on page 40).
Note: To prolong the life of your phone, hold it in one hand while opening the cover with the other hand.
To answer a waiting call (normally indicated by a beep), press SEND.
Note: Call Waiting is a network feature. You need to subscribe to it through your service provider.
• To stop the ringing without answering the call, press PWR briefly or press END.
• To answer the call while using the headset (HDC-3P), press the answer/end button on the headset cord, or press SEND on the keypad.
The Basics
14
Make sure the antenna is fully extended during
CALL
the call.
Note: If Keyguard is active, a call can only be answered by pressing headset.
SEND, including when you are using the
When there is an incoming call CALL flashes on the dis­play and the LED indicator flashes. The phone’s ringing sound (and vibration) depends on the Profile you’re using. See “Select­ing the Profile” on page 18.
You can answer a ca ll an y tim e , even while using Keyguard, Phone Book or menu functions.
If you don’t answer a call, the message 1 MISSED CALL or ‘n’ MISSED CALLS appears on the display. Press CLR to clear the display.
Or, press OK, or to view the Missed Calls List. The phone automatically stores the caller’s number (if available) in the Missed Calls list (see “Missed Calls (Menu 2 3)” on page35). The list first tells you the number of new numbers in the list. Wait a few seconds for the most recent number to appear or press to scroll the list.
If you have subscribed to voicemail, the call will be transferred to your voice mailbox (see "Message Waiting (Voicemail)" on page 58).
Calling Line Iden tification
If you are a subscriber to a network that supports Calling Line Identification your phone may dis­play the caller’s number or name when there is an incoming call. (The name appears only if the name and number are stored in the Phone Book). For more details, see “Availability of network ser­vices” on page 56 and “Callin g Lin e Iden tific ation ” on page 56.
15
The Basics

Adjusting the earpiece volume

During a call, press quickly to increase the volume, or press and hold
to decrease the vol-
ume. Or, press or .

Last number redial

From the Ready screen, press SEND. The last number dialed appears. Press SEND again to initiate the call.
Last 15 Dialed Calls
From the Ready screen, press SEND, then press
or repeatedly until you see the number
you want. Then press SEND to dial it. See "Dialed Calls (Menu 2 1)" on page 35 for
more information.

Speed dialing

Enter the number of the Phone Book location (1-75) where the phone number is stored, then press SEND.
If the Phone Book location is empty, the message
LOCATION EMPTY appears.

1-Touch dialing

If 1-Touch Dialing is set to On, you can dial the phone number stored in any of the Phone Book locations 1-8 by pressing a single key:
Press the required number key (1-8) for about two seconds.
Note: Use location 1 for your Voice Mailbox Number.
See “1-Touch Dialing (Menu 3 6)” on page 38.
The Basics
16

Emergency 9 dialing

The 9 Key is reserved for an Emergency Number that is programmed into your phone by your dealer.
Press the 9 key for about 2 seconds.
Emergency 9 Dialing must be set On for this to work! See “Emergency 9 Dialing (Menu 3 7)” on page 38.
Note: Official emergency numbers vary by area (e.g., 911 or another official emergency number). However, only one emergency number is programmed into your phone to be dialed automatically by Emergency 9 Dialing, and this may not be the proper number in all circumstances.
Note: Emergency 9 Dialing does not operate when Keyguard is activated. However, an emergency call can be made without deactivating Keyguard by entering the whole emergency number programmed into your phone and then pressing
SEND.

Keyguard

To activate Keyguard, press#END for a few seconds (or press MENU then @).
To deactivate Keyguard, press MENU then @.
Keyguard lets you “lock” your phone’s keypad so that keys don’t accidentally get pressed (e.g. when the phone is in a pocket or a purse). KEY- GUARD ACTIVE remains (or reappears) on the display until any key is pressed or Keyguard is deactivated.
Answering a Call with Keyguard Active
Press SEND.
During the call, the keypad is automatically unlocked and the phone can be used normally. Af ter the call is ended, Keyguard is a utoma ticall y act ivat ed aga in.
Switching off your phone with Keyguard Active
Open the phone, deactivate Keyguard (press MENU then @), then switch the phone off as usual.
17
The Basics
Or, if the phone is r inging and Keyguard is active, you can press and hold PWR to switch off the
while it is ringing
phone
.
Making an emergency call with keyguard active
Enter the emergency number preprogrammed in your phone and press SEND.
The emergency number shows up on the display after you have entered it completely.
Note: When Keyguard is activated, calls may be possible to the emergency number programmed into your phone (e.g., 911 or another official emergency number). However, Emergency 9 Dialing does not operate.
Note: Keyguard is not a security feature and will not prevent unauthorized use of your phone.

Selecting th e Profile

A profile is a group of preset sound settings. You can choose the profile that works best for you.
The only changeable profile is My tones. All of the other profiles are set to the values shown in the table (and cannot be viewed using the menu). To change settings in My tones, simply use the menu or volume control for each item in the profile.
Ringing Options
Ringing Volume
Keypad Tones
Roam Beep
Message Alert Tone
Earpiece Volume
The Basics
Normal
Profile
Ring+ Vibra
Level 4 Level 5 None None Level 5
Level 2Level 3Off Level 1Level 3
**OffOff*
Short Long Off Vibra
Level 4 Level 5 Level 4 Level 4 *
Loud
Profile
Ring+ Vibra
Silent
Profile
N/A Beep+
18
Quiet
Profile
Vibra
Only
Car
Profile
Ring
Short
* These items are as you set them using the menu or the volume control. You can set all of the settings in the My tones profile.
To select a profile: 1 At the Ready screen, press
.
2 Press again repeatedly
(or use or ), to move the pointer to the profile
you want. 3 Press OK or press and hold to choose it. For profiles other than
Normal, the phone displays the profile you are using. (Sometimes the profile name is replaced by a status message like LOCKED).
Note: When you’re in a call, pressing changes the earpiece volume, and you can’t change profiles.
Useful information about the Profile feature
• Settings for all the profiles except My tones
are fixed. You cannot view the settings in the
menu. The values in the menu are only for My
tones.
• If you use the menu to change any of the
profile settings, the profile will automatically
change to My tones, and any changes affect
My tones only.
• The phone remains set to a profile until you
select a different one.
• When you select the profile feature, you exit
any current menu or Phone Book operation.
• If you connect the phone to a Complete Car
Kit, the Car profile is selected automatically,
and Car appears in the displayed list of
19
The Basics
profiles. When you remove the phone from the Car Kit, the phone reverts to the profile selected before you used the Car Kit.
• If a headset is connected to the phone, then the current profile remains selected, but the earphone level is adjusted automatically (and remains selected until the headset is removed).
Don’t connect a headset when the phone is in the Complete Car Kit (you will hear an error tone)
.
• The Vibra Ri ngin g Opt ion will b e disab led when the phone is connected to a charger or a car kit.

Calling card calls

If you use the phone’s Calling Card storage feature (see “Calling Card (Menu 5 1)” on page42), you can charge long-distance calls to a calling card. You won’t need to enter the Calling Card information every time you want to make a card call.
Note: No physical credit cards are needed in order to direct the call charges to the credit card; however you must first store and select a Calling Card with Menu 5 1!
To make a calling card call:
1 Enter the phone number. 2 Press SEND
for 2 seconds
. The phone displays CARD CALL (and the card name if entered). The message will change to WAIT FOR TONE, THEN PRESS ‘OK’.
3 When you hear a tone or voice prompt, press
OK or SEND. The phone may ask you again to WAIT FOR TONE, THEN PRESS ‘OK’.
4 If you get another tone or voice prompt, press
OK or SEND again.
The call is then made, and the phone displays CARD CALL and the name of the card (if it is has a name).
The Basics
20

PIN calls

PIN code:
You can make calling card calls in conjunction with PIN calls.
‘PIN Call’ is a network security feature that requires a PIN Code every time you make a call. You can activate or deactivate it and specify the numbers in your PIN Code. Please check with your operator for the availability of PIN Calling in your network.
Note: If you are using the phone in an area that doesn’t require PIN dialing, deactivate PIN Call.
Activating PIN call
1 Enter * # 7 4 6 2 2 5 5 # (spells PINCALL). 2 Enter your four-digit PIN
Code, which is provided by your network operator. Press OK. The phone briefly displays PIN CALL ON.
Making PIN Calls
1 Make the call as usual (refer to “Making a
call” on page 12). The phone displays PIN CALL.
2 After you hear a tone, press SEND again.
The phone displays SENDING PIN.... If the
message remains on the display, press SEND again to resend t he PIN code. Wait for your call to be connected.
Note: If you’re in a network that doesn’t support PIN Calls, but your phone has tries to send a PIN. Press
Note: When the phone is set to the emergency number programmed into your phone (e.g., 911 or another official emergency number) will be dialed as a normal call without the PIN code request.
PIN Call On
CLR to end the PIN Call attempt.
21
, the phone still
PIN CALL ON, a call to
The Basics
Deactivating PIN call
Follow the steps in “Activating PIN Call”, but don’t enter your PIN Code at the prompt; just press OK.
The phone briefly displays PIN CALL OFF.

Voice and text messages

If you subscribe to voicemail, callers can leave you voice messages which you can recall from your voice mailbox.
If you have purchased the Nokia 282 NAMPS version and subscribe to a text message network service, callers may send you short text messages that you can read on your phone’s display.
For more details, see “Network Services” on page 56.
The Basics
22
Loading...
+ 58 hidden pages