Page 1
Nokia Customer Care
RH-53/54
5-Service Tools
Issue 1 09/2004 Copyright © 2004 Nokia. All Rights Reserved
Page 2
RH-53/54
Nokia Customer Care 5-Service Tools
[This page left intentionally blank]
2 COMPANY CONFIDENTIAL ISSUE 1 09/2004
Copyright © 2004 Nokia. All Rights Reserved.
Page 3
RH-53/54
5-Service Tools Nokia Customer Care
Table of Contents
Page No
Custom Service Tools ........................................................................................5
Standard service tools ....................................................................................... 7
Service Cables ................................................................................................ 10
DA-27 Working Instruction...............................................................................12
ISSUE 1 09/2004 COMPANY CONFIDENTIAL 3
Copyright © 2004 Nokia. All Rights Reserved.
Page 4
RH-53/54
Nokia Customer Care 5-Service Tools
[This page left intentionally blank]
4 COMPANY CONFIDENTIAL ISSUE 1 09/2004
Copyright © 2004 Nokia. All Rights Reserved.
Page 5
RH-53/54
5-Service Tools Nokia Customer Care
Custom Service Tools
Product Service Tool
DA-27 Docking Station
Adapter
Spare lock part
for DA-27
MJ-36 Module Jig 0770856 This jig allows phone
Product
Code
0780352 The Docking Station
0780465 Spare lock part for
Photo Description Info
Adapter , togeth er
with a Docking Station, is used for analysis of Mbus, Fbus,
RF, and audio connections.
Pack of test 10 test
pins to be used with
SF-33 and DA-27,
code 0780398
DA-27
PWB-level service
and troubleshooting. Components
must be protected
against over-voltage
and over-current.
RJ-39 Soldering Jig 0780321 Used for soldering
and as a rework jig
for system module.
SA-45 RF Coupler 0780353 Enables RF connec-
tion with DA-27.
Note! Do not use for
RF-tuning.
ISSUE 1 09/2004 COMPANY CONFIDENTIAL 5
Copyright © 2004 Nokia. All Rights Reserved.
Page 6
RH-53/54
Nokia Customer Care 5-Service Tools
Product Service Tool
SF-33 POS Flash
Adapter
ST-12 Rework stencil 0780384 Front End Module
RJ-51 Rework Jig 0780417 To be used with ST-
Product
Code
0770857 The flash adapter
Photo Description Info
allows FBUS/MBUS
connections for
flashing.
Pack of test 10 test
pins to be used with
SF-33 and DA-27,
code 0780398
(FEM)
12.!
6 COMPANY CONFIDENTIAL ISSUE 1 09/2004
Copyright © 2004 Nokia. All Rights Reserved.
Page 7
RH-53/54
5-Service Tools Nokia Customer Care
■ Standard service tools
Product Service Tool
ACF-8 Universal Power
Supply
FLS-4S POS Flash
Adapter
FPS-8 Flash Prommer 0080321 The Flash Prommer FPS-
Product
Code
0680032 ACF-8 is used to power
0080543
(Americas)
0080542
(APAC)
0080541
(Europe/
Africa)
Photo Description Info
FPS-8 and FLS-4S. ACF8 has 6 Vdc and 2.1A output.
The Point of Sale (POS)
flash is a low-cost software upgrade tool. This
requires the XCS-1 cable
and ACP-8U for operation.
8 is used for heavy flash.
FPS-11 Parallel Flash
Prommer
JBV-1 Docking Station 0770298 The Docking Station and
0770758
Flashing several
units(max 8) at one time.
The FPS-11 multi prommer will replace FPS-8C
the Docking Station
Adapter are needed for
Mbus, Fbus, RF, and
audio connections.
This setup allows connection between flash prommers. When the audio box
is connected, it has to be
connected to the phone’s
audio connector. The
Docking Station can be
powered by FPS-8 or
external power supply.
ISSUE 1 09/2004 COMPANY CONFIDENTIAL 7
Copyright © 2004 Nokia. All Rights Reserved.
Page 8
RH-53/54
Nokia Customer Care 5-Service Tools
Product Service Tool
PKD-1 SW Security
Device
Product
Code
0750018 SW security device PKD-1
Photo Description Info
is hardware device that,
when connected to the
parallel (LPT) port of the
PC, enables the use of the
service software. Without
the dongle present, it is
not possible to use the
service software. Printers
or other peripheral
devices can be connected to the PC through
the dongle, if needed.
Caution: Make sure that
you have switched off the
PC and the printer before
making connections!
Caution: Do not connect
the PKD-1 to the serial
port. You may damage
your PKD-1!
SPS-2 Soldering Paste
Spreader
SRT-6 SRT-6 Opening
Tool
0770471
0770431 Opening tool for e.g.
removing display module
from C2 cover
8 COMPANY CONFIDENTIAL ISSUE 1 09/2004
Copyright © 2004 Nokia. All Rights Reserved.
Page 9
RH-53/54
5-Service Tools Nokia Customer Care
Product Service Tool
Product
Code
Photo Description Info
CA-5S Printing Cable 0730283 The DC cable CA-5S to be
used with the JVB-1 docking station.
St a ndard toolkit Content:
-
Nokia opening tool SRT-6
Nokia No. 0770431
-Tonichi torque driver Nokia
No. 6901525
-Hoya micro fibre cloth
MX304
-Dastex gloves S, M, XL
-Artilux goggles AH166
-Wera bit T5 867/4TX 5x50
-Wera bit T6 867/4TX 6x50
-Wera bit T6 867/4 6IPx50
-Facom side cutter 416E
-Facom T5 driver SP.14032
-Facom T6 driver SP.14033
-Facom slot screwdriver
AEF. 2x35.E
-Wetec tweezers 7abb SA-
ESD
-Wetec tweezers 22 SA-ESD
-Wetec tweezers 13 SA-
SMD ESD
-Wetec tweezers PSF SA-
ESD
-Wetec ESD brush E1211
-Kaiser Fototechnik airbrush
6315
-Wetec dental tool
DEM83266/0
-RS Components Scissors
323-5732
ISSUE 1 09/2004 COMPANY CONFIDENTIAL 9
Copyright © 2004 Nokia. All Rights Reserved.
Page 10
RH-53/54
Nokia Customer Care 5-Service Tools
■ Service Cables
Product Service Tool
AXS-4 Service Cable 0730090 The AXS-4 D9-D9
DAU-9S MBUS Cable 0730108 The MBUS cable
Product
Code
Photo Description Info
service cable is used
to connect two 9-pin
connectors (e.g.,
between PC and
FPS-8). AXS-4
length is 2 meters.
DAU-9S has a modular connector and is
used between PC
serial port and, for
example, the MJ-36.
FLC-2 DC Cable 0730185 FLC-2 is used to
supply a controlled
operating voltage.
PCS-1 Power Cable 0730012 The Power Cable
PCS-1 is used to
connect the service
tools (JBV-1, MJ-36)
to an external power
supply.
10 COMPANY CONFIDENTIAL ISSUE 1 09/2004
Copyright © 2004 Nokia. All Rights Reserved.
Page 11
RH-53/54
5-Service Tools Nokia Customer Care
Product Service Tool
XCS-1 Service Cable 0730218 The XCS-1 Service
XCS-4 Modular Cable 0730178 XCS-4 is a shielded
XRF-1 RF Test Cable 0730085 RF cable XRF-1 is
Product
Code
Photo Description Info
Cable is used to
connect FLS-4S to
SF-33.
cable (one specially
shielded conductor)
modular cable for
flashing and service
purposes.
used to connect e.g.
Module Jig MJ-36 to
RF measurement
equipment.)
ISSUE 1 09/2004 COMPANY CONFIDENTIAL 11
Copyright © 2004 Nokia. All Rights Reserved.
Page 12
RH-53/54
Nokia Customer Care 5-Service Tools
DA-27 Working Instruction
Working instructions for DA-27.
Table 1:
Insert the DA-27 like a battery, start at the battery
connector side.
First move the phone as shown in figure 1, then
lift the phone carefully.
First press the phone as shown in figure 1,
then push down the phone and release the
unit.
Now remove the phone from DA-27.
12 COMPANY CONFIDENTIAL ISSUE 1 09/2004
Copyright © 2004 Nokia. All Rights Reserved.
Loading...