Nissan MAXIMA QRG 2006 Service Manual

QU I CK R E FERENC E G U I D E

2006 MAXIMA

Sh ift_exhilaration

HEADLIGHT AND TURN SIGNAL CONTROL

CONTROL PANEL DISPLAY

POWER FOLDING OUTSIDE MIRRORS

INSTRUMENT BRIGHTNESS CONTROL

HEATED STEERING WHEEL SWITCH

(if so equipped)

CRUISE CONTROL

WINDSHIELD WIPER/ WASHER SWITCH

STEERING WHEEL SWITCHES FOR AUDIO CONTROL/ BLUETOOTH®

CLIMATE CONTROLS

AUDIO SYSTEM

STEERING WHEEL SWITCHES FOR AUDIO CONTROL

 To choose Preset A, B, C, Tape, CD or SAT (if

so equipped) press MODE repeatedly.

 The tuning up or down

to perform the following:

• Push the to change to a preset station.

• Push the

< >

switch for less than 1.5 seconds

< >

switch for more than 1.5 seconds to seek to the next or previous broadcasting radio station.

• Push the to change programs on the CD.

< >

switch while playing a CD (if so equipped) for less than 1.5 seconds

< >

switch can be used

• If the vehicle is equipped with a CD changer, press for more than 1.5 seconds to change between CDs.

BLUETOOTH® HANDS-FREE PHONE SYSTEM

(if so equipped)

 With steering wheel mounted buttons, an overhead microphone and sound

transmitted through the audio system speaker, the Bluetooth® Hands-Free Phone System utilizes Bluetooth® wireless technology and voice recognition to provide hands-free cellular communication. Before you can use the feature, you will need to set-up or pair the system to recognize your cellular phone(s). The pairing procedure for cellular phones varies according to each manufacturer. For a list of recommended phones and detailed pairing instructions, please visit www.nissanusa.com/bluetooth.

Refer to your Owner’s Manual for detailed information on usage and operation.

WINDSHIELD WIPER/WASHER SWITCH

 The ignition switch must be in the ON

position to activate the windshield wipers.

 Push the lever down to operate the

windshield wipers.

 Switch operation includes:

INT

Intermittent – Wipers operate intermittently

and can be adjusted by turning the time control. Also, the intermittent operation speed varies in accordance with the vehicle speed. (For example, when the vehicle speed is high, the intermittent operation speed will be faster.)

Low speed – Wipers operate at a continuous low speed.

High speed – Wipers operate at a continuous high speed.

MIST

Mist – Lift the lever up for one sweep operation of the wiper.

Wash – Pull the lever toward you. Wipers automatically wipe several times.

CRUISE CONTROL

 To turn on the cruise control, push the main

(ON/OFF) switch on. The indicator light in the instrument panel comes on.

 To set cruising speed, accelerate the vehicle

to desired speed, push the

COAST/SET

switch and release it. The SET indicator light in the instrument panel comes on.

 To reset at a faster cruising speed, push and hold the ACCEL/RES switch. When

the vehicle attains the speed you desire, release the switch.

 To reset at a slower cruising speed, push and hold the COAST/SET switch.

Release the switch when the vehicle slows to the desired speed.

 To resume a preset speed, push and release the ACCEL/RES switch. The

vehicle returns to the last set cruising speed when the vehicle speed is over 25 MPH (40 km/h).

 To cancel cruise control, push the CANCEL switch or tap the brake pedal. The SET

indicator light in the instrument panel will go out.

 To turn off cruise control, push the main (ON/OFF) switch. Both the CRUISE indicator

light and the SET light in the instrument panel will go out.

CONTROL PANEL DISPLAY WITH NAVIGATION SYSTEM (if so equipped)

TRIP BUTTON

When the TRIP button is pressed, the following modes will display on the screen:



Warning message (if there are any)

 TRIP 1 (Elapsed Time, Driving

Distance, Average Speed)

 TRIP 2 (Elapsed Time, Driving

Distance, Average Speed)

 FUEL ECONOMY (Average Fuel Economy, Distance to Empty)  MAINTENANCE (Engine Oil, Tire Rotation)  OFF

MAINTENANCE ITEMS

You can set the engine oil and the tire rotation interval. To display the setting of the maintenance interval, select the ENGINE OIL or TIRE ROTATION key using the joystick and press the ENTER button. To set the maintenance interval, select the MAINTENANCE SCHEDULE key using the joystick and push the joystick to the right or left. To reset the maintenance interval, select the RESET key using the joystick and press the

ENTER button.

DISPLAY SCREEN SET TINGS The SETTING screen will appear when the SETTING button is pressed. Select the

DISPLAY key with the joystick and press the ENTER button to choose from various

display screen options. The DISPLAY key will allow you to personalize the information shown on the display screen, such as climate control or audio system display.

SET TING THE CLOCK

The clock on the display screen can be adjusted using the joystick by the following procedure:

 Press the SETTING button, then select SYSTEM SETTINGS from the menu on the

display screen.

 Next select CLOCK to enter the CLOCK SETTINGS mode.  Then select the HOURS or MINUTES key and hold the joystick left or right to adjust

the time. After the desired time is shown on the display screen, press the BACK button to store.

Refer to your Owner’s Manual and Navigation System Owner’s Manual for additional information on your navigation system.

+ 8 hidden pages