Nil sk P 130.1/150.1/160.1
Nil sk P 130.1/150.1/160.1 X-TRA
128303204 c
User Manual
Printed in China
Copyright © 2010 Nilfisk, Division of Nilfisk-Advance A/S
We congratulate you on your new Nilfi sk High Pressure Washer
We are confi dent that the new high pressure washer of Nilfi sk will justify your expectations of quick and
effective cleaning. Now you have a cleaning device which will facilitate your future cleaning tasks and make
them more effective. Many tasks which were previously diffi cult, can now be solved in a few minutes and
with a much better result.
If, contrary to expectations, problems should arise which cannot be remedied by means of the information
in section 8.0, the Nilfi sk service organization will be at your disposal.
Nilfi sk is a global concern with a comprehensive knowledge within development and manufac turing of ef fi cient and environmentally friendly cleaning solutions. Our product range comprises cleaning solutions for
selected customer groups - from machines for domestic use to big industrial cleaning systems.
The expertise of Nilfi sk is cleaning focusing the need of the customer. Our wish is that you as a customers should feel quite confi dent that the cleaning equipment you buy from us is the most effi cient and that it
fulfi ls all of your expectations.
Best regards
Nilfi sk
Division of Nilfi sk-Advance A/S
Fields of application EN
The applications for this product are domestic clean ing jobs:
Car, motorbike, boat, caravan, trailer, pa tio/drive/
fl agstones, woodwork, brickwork, bar be cue,
garden furniture etc.
Contents EN
1.0 Preparation .................................................... 4
2.0 Operating instructions .................................... 5
3.0 Accessories ................................................... 7
4.0 Maintenance .................................................. 8
5.0 Storage .......................................................... 8
6.0 Recycling the washer ..................................... 8
7.0 Questions - and answers ............................... 8
8.0 Trouble shooting guide ................................... 9
9.0 Warranty .....................................................10
Model survey
(P 12 476)
1. Electric cable
2. Start-/stop switch
3. Connection for high pressure hose (only PRO
130/150/160)
4. Connection for water (with fi lter)
5. High pressure hose
6. Spray gun with trigger (6a) and locking device
(6b)
7. Spray lance with bayonet socket
8. TORNADO
9. POWERSPEED
®
PR nozzle
®
nozzle
10. Needle for cleaning of nozzle
11. Detachable container for detergents
12. Dosing regulator for detergents
13. Pressure gauge (not available on model B)
14. Regulation of pressure / water volume (not
available on model B)
15. Hose reel (only PRO 130/150/160 X-TRA)
16. Hose storage (only PRO 130/150/160)
Specifi cations: See model tag of machine.
Sound pressure level measured in accor dance with
ISO 3744, EEC Directive 2000/14/EEC:
P 130.1: L
P 150.1: L
P 160.1: L
= 80 dB(A), L
pA
= 80 dB(A), L
pA
= 80 dB(A), L
pA
= 90 dB(A).
WA
= 93 dB(A).
WA
= 95 dB(A).
WA
Hand/arm vibrations measured according to ISO
5349 is < 2.5 m/s
2
.
We reserve the right to alter the spec i fi ca tions.
3
1.0 Preparation EN
Before starting up your high pressure wash er, we
advise you to carefully read through this instruction
manual. Fol low all instructions to min i mize the risk
of injuries when using the ma chine.
Prior to operation
Before you start up your new machine for the fi rst
time, you must mount the holder for the spray lance.
It is fi xed at the top of the transport handle.
1
2
1. Insert the holder in the recess of the handle (see
illu.).
2. Fix the holder with the screw.
Mount water fi lter and water inlet connection (4).
PRO 130/150/160 X-TRA: Mount the handle for the
hose reel.
Before starting up your machine please check it
care ful ly for any de fects. If you fi nd any, do not start
up your ma chine and con tact your Nilfi sk distributor.
Especially check:
• The insulation of the electric cable should be
fault less and without any cracks. If the elec tric
cable is damaged, it should be replaced by an
authorized Nilfi sk distributor.
Mains power connection
The following should be observed when connecting
the high pressure washer to the elec tric in stal la tion:
• Only connect the machine to an in stal la tion with
earth connection.
• The electric installation shall be made by a cer ti fi ed electrician.
• It is strong ly rec om mend ed that the elec tric sup ply to this ma chine should in clude a re sid u al
cur rent device (GFCI).
Extension cable
Extension cables should be of a watertight con struc tion and comply with the below-men tioned
requirements for length and cable dimensions.
1,5 mm² max 20 m
2,5 mm² max 30 m
• Cable connections should be kept dry and off the
ground.
• Always uncoil the extension cable com plete ly to
avoid heat dam age to the cable.
Water connection
Connect the high pressure washer by means of a
water hose to the water tap (pressure of inlet wa ter, max. 10 bar - temperature of inlet water, max.
60°C). You may use an or di nary ½" gar den hose of
min. 10 m and max. 25 m. At tach the hose using
a quick connector. NOTE: Connection to the public
mains according to regulations.
This high pressure washer is only allowed
to be connected with the drinking water
mains, when an appropriate backfl ow
preventer has been installed, Type BA according to
EN 1717. The backfl ow preventer can be ordered
under number 106411177. The length of the hose
between the backfl ow preventer and the high pressure washer must be at least 10 metres to absorb
possible pressure peaks (min diameter ½ inch).
Operation by suction (for example from a rainwater
vessel) is carried out without backfl ow preventer.
Recommended suction set: 126411387.
As soon as water has fl own through the BA valve,
this water is not considered to be drinking water any
more.
IMPORTANT! Only use water without any im pu ri ties. If there is a risk of running sand in the inlet
water (i.e. from your own well), a fi lter should be
mounted.
Safety precautions
• WARNING! High pressure jets can
be dan ger ous. Nev er direct the water jet at per sons, pets, live elec tri cal equip ment or the ma chine itself.
• The operator and anyone in the im-
me di ate vi cin i ty of the site of clean ing should take action to pro tect
them selves from being struck by
debris dis lodged dur ing op er a tion.
Wear goggles during op er a tion.
4