BINOCULARS/BINOCULARES/JUMELLES/BINÓCULO En
Es
Fr
Pt
8x42/10x42
Instruction manual/Manual de instrucciones/
Manuel d’utilisation/Manual de instruções
English ............................................ |
p. 4-5 |
Español ........................................... |
p. 6-7 |
Français .......................................... |
p. 8-9 |
Português brasileiro .................. |
p. 10-11 |
2
|
|
A |
|
5 |
|
|
6 |
|
1 |
|
|
|
7 |
|
2 |
2 |
B |
3 |
8 |
|
|
|
CD
9
4
3
Es
Fr
Pt
Nomenclature
Please refer to the numbered images on page 3.
1Eyecup
2Neck strap eyelet
3Focusing ring
4Objective lens
English 5Interpupillary distance
6Dioptre ring
7Dioptre index
80 (zero) dioptre position
9Central shaft
ITEMS SUPPLIED |
|
Binoculars |
x1 |
Eyepiece cap |
x1 |
Objective lens caps |
x2 |
Soft case |
x1 |
Neck strap |
x1 |
Eyecups
For directions in which to turn the eyecups, please refer to the image on page 3.
For eyeglass wearers, use fully retracted. To accurately adjust your view, you can also use two click stops before reaching the fully retracted position.
For non-eyeglass wearers, use fully extended. To accurately adjust your eye position, you can also use two click stops before reaching the fully extended position.
4
Neckstrap and caps during observation
Please refer to images A, B, C and D on page 3.
Neck Strap
Attach the neckstrap as illustrated (A), paying special attention to avoid twisting the strap.
Attach the objective lens caps (B), making sure the cap part hinges open downward from the binocular tube when folded open. The slit should be visible at the left side of each binocular tube, viewed from the eyepiece side, to confirm correct positioning (correctly attached when supplied).
Eyepiece cap
There are two ways you can position the eyepiece cap as you observe your subject.
Remove the eyepiece cap from the eyepieces and allow it to hang from the neckstrap.
Remove the eyepiece cap from the eyepieces, then detach the right strap from the cap and allow it to hang from the left neckstrap (C).
To attach/detach caps from the neckstrap as shown in image (D) in the following order:
Attaching: c → b → a
Detaching: a → b → c
Flipdown objective lens caps
The binoculars are used with the objective lens caps folded open (C).
Es
Fr
Pt
5
Es
Fr
Pt
Specifications
Type: Dach prism central focusing type
Model |
8x42 |
|
10x42 |
Magnification (x) |
8 |
|
10 |
|
|
|
|
Effective diameter of objective lens (mm) |
42 |
|
42 |
|
|
|
|
Angular field of view (real) (°) |
8.0 |
|
6.7 |
|
|
|
|
Angular field of view (apparent) (°)* |
58.4 |
|
60.7 |
Field of view at 1,000m/yds. (m/ft.) |
140/420 |
|
117/351 |
|
|
|
|
Exit pupil (mm) |
5.3 |
|
4.2 |
|
|
|
|
Brightness |
28.1 |
|
17.6 |
|
|
|
|
Eye relief (mm) |
17.1 |
|
16.5 |
Close focusing distance, approx. (m/ft.) |
2.5/8.2 |
|
2.5/8.2 |
|
|
|
|
Interpupillary distance adjustment (mm) |
56-72 |
|
56-72 |
|
|
|
|
Length (mm/in.) |
142/5.6 |
|
142/5.6 |
|
|
|
|
Width (mm/in.) |
130/5.1 |
|
130/5.1 |
Weight (g/oz.) |
650/22.9 |
|
660/23.3 |
|
|
|
|
Structure |
Waterproof (up to 1 metre for 10 minutes) and nitrogen |
||
|
gas filled |
||
|
|
*The number calculated by the formula [tan ω' = Γ x tanω ]: Apparent field of view: 2ω', Magnification: Γ , Real field of view: 2ω
6