NIKON D200 TECHNICAL INFORMATION TIE05251

QUALITY ASSURANCE DEPT.

TIE-05251

2006/01/12

H.Masumoto

Mgr

Chf

T.Ogasahara

H. Tsuru

D200》 Revision of Image adjustment software (J65084)

《

Summary

The image adjustment software, which was modied to correct vertical "noise" lines (ref. TIE05245), has been
revised and the some items have been changed as follows:

Contents

　Change:

1. Two-type data (xed value to correct vertical noise lines; traditional xed value) was kept in the

software, and the software could automatically make a judgement and write the value.

2. The message indicated before making WHITE POINT compensation was changed to [IF

THE DG PCB HAS BEEN CHANGED, ADJUST "1. BLACK POINT PIXEL DEFECT

COMPENSATION" FIRST.]

3. The initialization of clock function was added to the factory default.

4. The destinations specied by the factory default were changed to only Japan and U.K.

　Date of Version: 2006-01-10 (Ver1.02)

　Distribution: For service facilities where the adjustment software was already purchased,

the revised version will be separately distributed by RP of Service Planning

free of charge.

Caution) "CCDINT_1_04.DAT" le was added.

Internal and subcontractors' use only

P1/1