Nikon D100 Help Guide

Quick Ceph®Systems

Doc ID# 1028Nikon_D100_help - Revision 4-25-03

Nikon D100 Help Guide

http://www.quickceph.com/docs/1028Nikon_D100_help.pdf

Page 1

The camera settings shown below offer a starting point for taking pictures with the Nikon D100 digital camera.

Nikon includes a help manual with each camera. We encourage you to familiarize yourself

with the settings and usage of this camera.

Recommended Camera Accessories

A

Setting Up the Nikon D100

Tips for Taking Extraoral Images

Camera Usage

B

Nikon D100 Camera Body
Nikkor 60mm Micro Lens
Nikon SB-29s Ring Flash
128MB CompactFlash card
(multiple camera cards optional)

NOTE: We recommend that you use the 60mm lens as opposed to a more traditional 105mm lens because the camera has a built-in mag­nification of 1.5x. A 60mm lens is equivalent to a 90mm lens on a 35mm camera. The normal 105mm lens that is recommended for use
with 35mm film cameras is too long. The user would have to take the photos from more than 7 feet away, and with the flash this far from
the patient's face, the images may be darker.

We recommend purchasing two CompactFlash cards and using a Card Reader to import images to the Quick Ceph program. Although the
camera can be connected directly to the computer using a USB cable, the transfer process would use the camera batteries unnecessarily
and would make the camera unavailable to take additional photos. Two cards allow the user to transfer images with one card while tak­ing additional photographs with the other.

Sub-Command Dial

Function Dial (A)

Metering Selector

Ideal settings for the

extraoral photographs,

displayed on top LCD

screen.

SB-29s Flash Intensity

Before taking photographs, the image size on the camera needs
to be changed to the Medium setting. This yields images that
have a resolution of 2240 x 1488 pixels, which is enough for
QC2000. To do this, rotate the Function Dial (found on the left
side of the camera) to the “QUAL” mode. Then, rotate the Sub-
Command Dial (found on the front of the camera) until the “M”
setting appears in the top LCD display. Make sure the “Norm”
icon is also displayed, as shown in the sample to the right.

Next, set the camera to the “Aperture Priority” mode by rotating
the Function Dial to the “A” mode.

The SB-29s ring flash should be mounted to the hot shoe on the
top of the camera, and the ring should be mounted on the lens.
Depending on the lens size, you may need to use a lens adapter
to connect the flash to the lens. The camera bag included with
the SB-29s ring flash contains three different sized lens adapters
to allow you to mount the flash unit.

1

2

Lens Adapter

When taking the extraoral images with the 60 mm lens, the cam­era should be held approximately 5 feet from the patient’s face.
Set the aperture to “F11” by rotating the Sub-Command Dial
clockwise. If the F value does not appear, hold down the shutter
button half-way to display the F value. You can then change the
F-stop value. Then, rotate the Metering Selector on the back of
the camera to select the “Matrix Metering” option.

1

The SB-29s ring flash can attached to the lens or
attached to the mount above the lens. It needs to have
the flash intensity set to the highest manual setting
for the extraoral images. On the back of the
Controller unit, slide the Flash Mode Selector to the
“M” mode, as shown on the image below.

2

Sub-Command Dial

3

Function Dial (QUAL)

Quick Ceph®Systems

Doc ID# 1028Nikon_D100_help - Revision 4-25-03

Nikon D100 Help Guide

http://www.quickceph.com/docs/1028Nikon_D100_help.pdf

Page 2

Please Note: We only recommend this camera. We do not manufacture it. If you have technical difficulties,
please contact Nikon Support at [phone].

When you are taking the lateral head image, make sure the patient’s head is level, with no tilting or canting. We suggest that
you place a mirror with a vertical line in front of the patient and have them align themselves to it. You should capture the
photo with the camera lens perpendicular to the patient’s Frankfurt Horizontal plane. These steps ensure the most accuracy
when you align the photos to the x-ray tracings.

We suggest using either a wall mounted lightbox with a built-in slave flash or a bare slave flash to eliminate shadows on
the facial photos. If you are using a bare slave flash, we have found that it works best when placed precisely behind the
patient’s head, facing toward a white background. You may need to adjust the brightness on the background lighting that
you use in order to generate accurate soft tissue hues. Overhead fluorescent lighting may also affect the color of the images.
You can replace the fluorescent bulbs with halogen lighting to produce better color images. Professional photographers
spend time setting up their studios for just the right picture. We also have to invest time in setting up our practices for the
right lighting for digital images.

Tips for Taking Intraoral Images

Taking Images of X-Rays For QC2000

C

Using the settings provided in this document, the Nikon D100 equipped with a 60mm lens can be used to take digital images
of x-rays that are 100% the size of the original when imported into QC2000. To do this, place the x-ray on a lightbox and
situate the camera so that the distance between the lens and the x-ray is exactly 1015mm. This can be done by mounting the
camera on a camera stand oriented vertically, or by placing both the lightbox and the camera horizontal to each other.

Once the image is taken, it can be transferred to QC2000. Make sure not to resize it, as that will affect the calibration. Follow
the steps outlined in Chapter 2 and 3 of the QC2000 manual to import the image into the program.

SB-29s Flash Intensity

3

4

The Nikon D100 requires a well-lit subject in order to focus correctly. If the subject is not bright­ly lit, as is sometimes the case with occlusal pictures, images taken with the camera may be out
of focus, or the camera may simply not allow the image to be taken. To prevent this from hap­pening, make sure to provide enough intraoral lighting, either through ambient light sources or
with a dental light. If the patient is sitting in a dental chair, have them tilt their head back when
taking lower occlusal pictures to maximize the amount of light entering the intraoral cavity.

When taking the intraoral images, we recommend that you use the view finder to center the
image within the frame while leaving a slight margin on both sides. This allows the Quick Ceph
program to crop the image better. If the subject fills up too much space on the image, the photo
may not be able to be cropped correctly. When you are taking the frontal and buccal intraoral
pictures, make sure to take the picture at a 90º angle to the teeth. Also, try to align the horizon­tal plane of the camera with the patient’s occlusal plane. This will save time, as you will not have
to rotate the image inside Quick Ceph later.

With the 60 mm lens, the camera should be held between 1 to 2
feet from the patient’s face. Set the aperture to “F22” by rotating
the Sub-Command Dial (found on the front of the camera)
clockwise. If the F value does not appear, hold down the shutter
button half-way to display the F value. You can then change the
F-stop value. Then, rotate the Metering Selector on the back of
the camera to select the “Center-Weighted Metering” option.

1

Sub-Command Dial Metering Selector

The SB-29s ring flash can attached to the lens or
attached to the mount above the lens. It needs to have
the flash intensity set to the lowest manual setting for
the intraoral images. On the back of the Controller
unit, slide the Flash Mode Selector to the “M1/4”
mode, as shown on the image below.

2

3

4

Ideal settings for the

intraoral photographs,

displayed on top LCD

screen.