New Holland 620TL, 610TL, 600TL User Manual

New Holland 600TL Series Front-End Loader Specifications

610TL 620TL

LOADER MODEL 610TL 610TL 620TL 620TL TRACTOR COMPATIBILITY TT45A TT50A TT60A TT75A

ax. lift height, in. (mm) 109.0 (2769) 111.7 (2837) 114.5 (2908) 118.0 (2997) 114.5 (2908) 118.0 (2997)

M Dump clearance, in. (mm) 90.3 (2294) 93.0 (2362) 92.5 (2350) 93.0 (2362) 92.5 (2350) 93.0 (2362) Digging depth, in. (mm) 6.0 (152) 5.5 (140) 5.0 (127) 5.5 (140) 5.0 (127) 5.5 (140) Lift capacity @ 500 mm from

bucket pivot pin, lb. (kg) 1320 (599) 1320 (599) NA NA NA NA

Lift capacity @ 800 mm from

bucket pivot pin, lb. (kg) NA NA 2210 (1002) 2150 (975) 2210 (1002) 2150 (975)

Breakout force @ 500 mm from

bucket pivot pin, lb. (kg) 3400 (1542) 3400 (1542) NA NA NA NA

Breakout force @ 800 mm from

bucket pivot pin, lb. (kg) NA NA 4791 (2173) 4520 (2050) 4791 (2173) 4520 (2050) Reach @ max. lift height, in. (mm) 24.3 (617) 24.3 (617) 34.0 (864) 26.0 (660) 34.0 (864) 26.0 (660) Bucket rollback angle, degrees 20 20 23 26 23 26 Bucket dump angle, degrees 42 42 45 47 45 47

Loader specifications may vary with tractor model, hydraulic system, tire, size, etc.

2WD 2WD 2WD 4WD 2WD 4WD

Visit our Web site at www.newholland.com/na Or, call toll-free: 1-888-290-7377

Design, materials and/or specifications are subject to change without notice and without liability ther Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.

efor

Safety begins with a thorough understanding of

the equipment. Always make sure you and

your operators read the Operator’s Manual

e using the equipment. Pay close

befor

attention to all safety and operating

decals and never operate machinery

without all shields, pr

and structures in place.

otective devices