Netgear WNA1000M Quick Start Manual

N150 Wireless Micro USB Adapter
WNA1000M

N150 Wireless Micro USB Adapter

Installation Guide

Resource CD

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are
trademarks and/or registered trademarks of NETGEAR, Inc. and/or its
subsidiaries in the United States and/or other countries. Information is
subject to change without notice. Other brand and product names are
trademarks and/or registered trademarks of their respective holders.
© 2012 NETGEAR, Inc. All rights reserved

Statement of Conditions

In the interest of improving internal design, operational function, and/or
reliability, NETGEAR reserves the right to make changes to the
products described in this document without notice. NETGEAR does
not assume any liability that may occur due to the use or application of
the product(s) or circuit layout(s) described herein.

This symbol is placed in accordance with the European
Union Directive 2002/96 on the Waste Electrical and
Electronic Equipment (the WEEE Directive). If disposed
of within the European Union, this product should be
treated and recycled in accordance with the laws of your
jurisdiction implementing the WEEE Directive.

2

Installation

1. Insert the Resource CD in your computer’s CD

drive. If the CD main screen does not display,
browse the files on the CD and double-click
Autorun.exe.

2. Click Setup. The Software Update Check screen
displays.

3. If you are connected to the Internet, click Check
for Updates. If not, then click Install from CD.

4. Accept the license agreement.

A message displays asking you to wait while
software is installed. Then you are prompted to
insert your adapter.

3