Netgear WG511 Quick Start Manual
3. Use the Smart Wizard to set up your wireless PC card.
4. Use the status bar to verify your wireless connectivity.
)NSTALLATION'UIDE
NETGEAR 54 Mbps Wireless PC Card WG511v2
These setup instructions assume that you will connect to an access point or
wireless router.
Estimated Completion 10 minutes.
Windows XP Installation
1. First, install the WG511v2 software.
Insert the NETGEAR CD. If the
CD main page does not appear,
double click autorun.exe on
the CD.
a. Click the Install Software link
and the Smart Wizard starts.
b. Follow the Wizard steps, and
click Next to continue.
c. When the Installation
Complete message appears,
click Next.
2. Now, insert the wireless PC
card.
a. When prompted, insert your
wireless PC card.
You will be prompted to select
the country where you are
located.
b. Select the country and click
Agree.
a. Choose to set up your wireless
adapter either with the NETGEAR
Smart Wizard (recommended) or the
Windows configuration utility.
Note: If you choose the Windows
Zero Configuration option, then you
must read the Windows XP
documentation for instructions.
b. Click Next to accept the NETGEAR
Smart Wizard.
You will be prompted to let the
wizard help you connect to a network
(recommended).
c. Click Next to accept.
d. Select the wireless network from the
drop down list, and the wizard
records your choice.
Note: Hidden networks do not
broadcast the Network Name
(SSID). These networks are included
in the drop down list, but the
Network Name (SSID) is blank.
If the network uses security, then the
Smart Wizard detects it.
e. Follow the Wizard steps for Security (if used) and for saving a Profile.
f. After you have reviewed the settings, click Finish.
The status bar is located at the bottom of the Settings page.
connection
status
Internet/router unlocked: network
connection indicator does not use security
signal strength
indicator
• The connection status indicator and the WG511v2 system tray icon
show the status of the connection.
• For details about the icons in the status bar, the WG511v2 LEDs, and
troubleshooting tips, see the User Manual on the NETGEAR CD.
• The Internet/Router connection indicator shows the progress of your
connection.
Connection Indicator Description
Connected to Internet Wireless Internet connection OK.
Connected to Router
___.___.___.___ or
169.254..x.x
Wireless connection to router OK
but no Internet connection at router.
Wireless connection to a router OK
but problem with the router. See the
online help or User Manual for
troubleshooting tips.
The WG511v2 icon appears in the system tray and on the desktop; and
the Settings page opens. The wizard initiates your wireless connection. It
could take up to a minute for your wireless connection to be established.
Windows 2000, Me/98SE
Installation
1. First, install the WG511v2 software.
Insert the NETGEAR CD. If the
CD main page does not appear,
double click autorun.exe on
the CD.
a. Click the Install Software
link and the Smart Wizard
starts.
b. Follow the Wizard steps, and
click Next to continue.
c. When the Installation
Complete message appears,
click Next.
2. Now, insert the wireless PC
card.
a. When prompted, insert your
wireless PC card.
You will be prompted to select
the country where you are
located.
b. Select the country and click
Agree.
3. Use the Smart Wizard to set up your wireless PC card.
a. You will be prompted to let the
wizard help you select a network
(recommended)
Click Next to accept.
b. Select the wireless network from the
drop down list, and the wizard
records your choice.
Note: Hidden networks do not
broadcast the Network Name
(SSID). These networks are included
in the drop down list, but the
Network Name (SSID) is blank.
If the network uses security, then the
Smart Wizard detects it.
c. Follow the Wizard steps for Security (if used) and for saving a Profile.
d. After you have reviewed the settings, click Finish.
The WG511v2 icon appears in the system tray and on the desktop; and
the Settings page opens. The wizard initiates your wireless connection. It
could take up to a minute for your wireless connection to be established.
4. Use the status bar to verify your wireless connectivity.
The status bar is located at the bottom of the Settings page.
• The connection status indicator and the WG511v2 system tray icon
show the status of the connection.
• For details about the icons in the status bar, the WG511v2 LEDs, and
troubleshooting tips, see the User Manual on the NETGEAR CD.
• The Internet/Router connection indicator shows the progress of your
connection.
Connection Indicator Description
Connected to Internet Wireless Internet connection OK.
Connected to Router
___.___.___.___ or
169.254..x.x
Wireless connection to router OK
but no Internet connection at router.
Wireless connection to a router OK
but problem with the router. See the
online help or User Manual for
troubleshooting tips.
Technical Support
After completing the Smart Wizard configuration assistant, locate the serial
number on the bottom label of your product and use it to register your product at
http://www.NETGEAR.com/register.
Registration on the Web site or over the phone is required before you can use our
telephone support service. The phone numbers for worldwide regional customer
support centers are on the Warranty and Support Information card that came with
your product.
Go to http://kbserver.netgear.com for product updates and Web support.
October 2005
connection
status
signal strength
Internet/router unlocked: network
connection indicator does not use security
indicator
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,
this product should be treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
©2005 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of Netgear, Inc. in the
United States and/or other countries. Other brand and product names are trademarks or registered trademarks of
their respective holders.
Loading...