Netgear ACC-10314-03 Product Data Sheet
NETGEAR ProSafe™ Wireless LAN Antennas and Accessories
NETGEAR 14 dBi Patch Panel Directional Antenna - ANT24D18
N
ETGEAR 9 dBi Omni-directional Antenna-ANT2409
NETGEAR 5 dBi Omni-directional Antenna - ANT24O5
NETGEAR Antenna Cables
OTE:To obtain optimal results in
N
xtending wireless range with antenna
e
nstallations, it is recommended that a
i
ualified, professional installer is consulted
q
or site survey and proper installation.
f
Optimize WLAN Range and Power
NETGEAR’s ProSafe line of antennas and accessories for 802.11b and 802.11g devices give you multiple
options for maximizing the reach and performance of your wireless infrastructure devices. Every
WLAN deployment is unique. When planning a network that incorporates wireless, varying facility
sizes, construction materials, distance between transmission points and physical obstructions must
be accounted for. With both directional and omni-directional antennas, low-loss cables, mounting
hardware, and other accessories, installers can customize a value-priced wireless solution that meets
the requirements of even the most challenging applications. All NETGEAR antennas are FCC-approved
to work with the following NETGEAR models: WAG302, WG302, WAG102, WG102, FVG318, FWG114P.
ProSafe 14 dBi Patch Panel Directional Antenna
The ANT24D18 indoor/outdoor directional* antenna provides a 3-in-1 solution for mixed applications in combination
with an 802.11b or 802.11g access point or wireless router. One, it delivers extended access point range in a single floor
environment ideally positioned in the corner of a building. Two, it functions point-to-point so that you can wirelessly
connect LANs between buildings in a campus-type environment. Three, it provides multifloor transmission when placed
on a ceiling, as the higher power output extends the range through typical flooring materials. Includes several mounting
options (fixed wall, wall adjustable, and pole), cable sold separately.
*Directional: Concentrates transmit and receive radio-frequency energy into a cone, or beam, for higher signal strength and reception in a
single direction.
ProSafe 9 dBi Indoor/Outdoor Omni-directional Antenna
The ANT2409 indoor/outdoor antenna provides extended point-to multi-point coverage for wireless 802.11b or 802.11g
devices. Optimal for medium range indoor or outdoor point-to-multi-point applications. Included lightning arrestor
(a $90 value) helps prevent damage due to lightning-induced surges or static electricity in outdoor applications. Typically
hung from crossbars of drop ceilings or on a rooftop, the waterproof and UV resistant ANT2409 includes wall and pole
mounting materials for installation ease, antenna cable and gr
ounding cable not included.
ProSafe 5 dBi Omni-directional Antenna
The ANT24O5 indoor omni-directional** antenna is designed to extend coverage of wireless 802.11b or 802.11g devices.
This antenna is especially useful in optimizing coverage when you want to place your wireless access point or router out of
plain view – in a wiring closet or above a ceiling pad. Locate this antenna at the top of a cubicle, on a ceiling, desktop or
wall, where it is more receptive to radio signals. Ideal placement is on a wall, 2 m high, or on the ceiling facing the area to
cover. Includes mounting brackets, cable sold separately.***
mni-directional: Radiates radio-frequency energy equally in all directions for widespread, all-points deployment.
O
**
***NET
Low
These 1.5 m, 3 m, 5 m, and 10 m antenna cables offer lo
points at a greater distance from a power source. They come with reverse SMA connectors and provide a standard connection optimized for use with NETGEAR‘s line of WLAN antennas, and Booster/Power Injector products (range can be
drastically reduced if longer or higher loss cables than these are used.)
ecommends use of antenna cable up to 5 m long with the ANT24O5 antenna.
GEAR r
-loss Antenna Cables
w loss at 2.4 GHz and added flexibility for setting up access
ProSafe 14 dBi Patch Panel Directional Antenna - ANT24D18
echnical Specifications
T
Description: 18 dBi Patch Panel Directional Antenna with reverse N female
jack and reverse N to reverse SMA adapter
Typical Application: Indoor/outdoor long range point-to-point connections
Maximum Outdoor Range1: 15.8 km (~9.8 miles)
Frequency Range: 2400 - 2500 MHz
Gain2: 14 dBi
Beam Width: Horizontal 60°
Vertical 30°
Dimensions: 262 x 240 x 30mm (10.31 x 9.44 x 1.18 in)
Weight: 1520 g/3.35 lbs.
Package Contents: - 14 dBi Patch Panel Directional Antenna - ANT24D18
(cable required, sold separately)
- Wall and ceiling mount brackets and hanging materials
- One reverse N type to reverse SMA adapter
- 2 meter cable
- Lightening Arrestor
- Installation guide
- Warranty/Support information card
Warranty: NETGEAR 2-year warranty
1
Range estimation is based on two wireless nodes each with an ANT24D18 antenna attached, associating with each other at 11 Mbps
under ideal line-of-sight conditions.
2
Gain: A ratio of decibels to an isotropic antenna that is commonly used to measure antenna coverage.
ProSafe 9 dBi Indoor/Outdoor Omni-directional Antenna - ANT2409
Technical Specifications
Description: 9 dBi Omni-directional Antenna with reverse N female connector
Typical Application: Indoor/outdoor medium range point-to-multipoint connections
Frequency Range: 2400 ~ 2485 MHz
Gain2: 9 dBi
Polarization: Vertical
Operating Temperature: -30 to 80º C (-22 to 176º F)
Weight: .9 kg/2 lbs.
Package Contents: - Indoor/Outdoor 9 dBi Omni-directional Antenna ANT2409
- Lightning Arrestor
- 2 meter low loss antenna cable (to connect antenna to the lightning arrestor)
- Wall and pole mounting brackets and hanging materials
erse N/SMA A
ev
ne r
- O
nstallation guide
- I
-
W
Warranty: NETGEAR 2-year warrranty
arranty/Support information card
dapter
Loading...