NEC WT610E User Manual

NEC Display Solutions of America, Inc.
WT610E Installation Guide
Desktop and Ceiling Mount v2.4
Contents
Ceiling Mounted Installation
Desktop Setup
Cabinet Dimensions Top, Front and Right Side Bottom, Back and Left Side
Optional Ceiling Mount Dimensions Optional Wall Mount Dimensions Optional Wall Mount Dimensions cont. Input Panel and Control Codes
Product Description
Type: 1 chip DMDTM Lens-less projector Dimensions: 15.0”(W) x 12.3”(H) x 12.3”(D) w/final mirror up 4 mirror bounce optical system Weight: 14.1 lbs Native Resolution: 1024 x 768 (1024x576 for 16:9 screens) Screen Range: 40” – 100” Diagonal (4:3) Brightness: 2000 lumens (1500 ANSI) Fan Noise: 37 dB / 32dB @ 1 meter Power Consumption: 370W (max) BTU’s: 1262 BTU/hour
Screen/Aspect Ratio_
Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developed scaling technology. By selecting the screen type in the menus, Aspect Ratio control is reconfigured for that screen type.
Notes
For screen sizes not indicated on the projection charts, use the formulas below. If the figures on the tables do not match the results of formulas, use the figures in the table.
All calculations are based on 4:3 aspect ratio.
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Formulas
The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug the screen width in for “W” in the Projection Formulas. Refer to the diagrams and charts for popular screen sizes on page 2 and 3.
Definitions: W = Screen width W = H x 4/3 H = Screen height H = W x 3/4 B = Vertical distance between projector foot and screen center Screen Diagonal = W x 5/4 C = Throw distance D = Vertical distance between projector foot and screen bottom
(screen top for ceiling mounted application) 16:9 Screen Formulas:
W = H x 16/9
Projection Formulas: B = 0.6882W + 3.935 Screen Diagonal = W x 18.358/16 C = 0.4874W - 13.056 D(4:3) = 0.3132W + 3.935 D(16:9) = 0.407W + 3.935
Vertical Position for a 16:9 screen: The Vertical Position adjustment moves the 16:9 image up and down in the unused portion of the 4:3 DLP panel. This adjustment is only available when the projector is set for 16:9 in the “Screen” menu. The range of Vertical Position is dependent on aspect ratio and 3D Reform used. If 3D Reform is not used, the approximate range of vertical position is +/-0.167H (H=Screen Height) when using a 16:9 screen. (See “Screen Type” and “Position” in user ma nual)
4:3 Screen Formulas:
H = W x 9/16
Page 2 Page 3
Page 4 Page 5 Page 6
Page 7 Page 8
Page 9
www.necdisplay.com WT610E Page 1 of 9
NEC Display Solutions of America, Inc.
WT610E Installation Guide
Desktop and Ceiling Mount v2.4

Ceiling Mounted Installation

The following diagram shows the relationship between pr ojector position and the screen. Refer to the charts below for data. Distances are in inches. For millimeters multiply by 25.4.
C
Distance chart for popular 4:3 screen sizes
D
37°
B
Distance chart for popular 16:9 screen sizes
Note: For screen sizes not indicate d in the distance charts, use the formulas on page 1.
66°
55°
5.1"
4.1"
Image Size (4:3)
Diagonal Width(W) Height(H)
inches inches inches inches inches inches
BCD
(4:3)
40 32 24 26.0 2.5 14.0 48 38.4 28.8 30.4 5.7 16.0 60 48 36 37.0 10.3 19.0 64 51.2 38.4 39.2 11.9 20.0 67 53.6 40.2 40.8 13.1 20.7 72 57.6 43.2 43.6 15.0 22.0 77 61.6 46.2 46.3 17.0 23.2 84 67.2 50.4 50.2 19.7 25.0 90 72 54 53.5 22.0 26.5 94 75.2 56.4 55.7 23.6 27.5
100 80 60 59.0 25.9 29.0
Image Si ze (16: 9)
Diagonal Width(W) Height(H)
inches inches inches inches inches inches
BC
D
(16:9)
37 32 18 26.0 2.5 17.0 40 35 19.7 28.0 4.0 18.2 83 72 40.5 53.5 22.0 33.2 92 80 45 59.0 25.9 36.5
Vertical Position for a 16:9 screen: The Vertical Position adjustment moves the 16:9 i m age up and down in the unused portion of the 4:3 DLP panel. This adjustment is only available when the projector is set for 16:9 in the “Screen” menu. The range of Vertical Position is dependent on aspect ratio and 3D Reform used. If 3D Reform is not used, the approximate range of vertical position is +/-0.167H (H=Screen Height) when using a 16:9 screen. (See “Screen Type” and “Position” in user manual)
www.necdisplay.com WT610E Page 2 of 9
NEC Display Solutions of America, Inc.
WT610E Installation Guide
Desktop and Ceiling Mount v2.4
Desktop Setup
The following diagram shows the relationship between pr ojector position and the screen. Refer to the charts below for data. Distances are in inches. For millimeters multiply by 25.4.
Distance chart for popular 4:3 screen sizes
5
B
Distance chart for popular 16:9 screen sizes
Note: For screen sizes not indicate d in the distance charts, use the formulas on page 1.
C
D
Vertical Position for a 16:9 screen: The Vertical Position adjustment moves the 16:9 i m age up and down in the unused portion of the 4:3 DLP panel. This adjustment is only available when the projector is set for 16:9 in the “Screen” menu. The range of Vertical Position is dependent on aspect ratio and 3D Reform used. If 3D Reform is not used, the approximate range of vertical position is +/-0.167H (H=Screen Height) when using a 16:9 screen. (See “Screen Type” and “Position” in user manual)
Image Size (4:3)
Diagonal Width(W ) Height(H)
inches inches inches in ches in ches in ches
40 32 24 26.0 2.5 14.0 48 38.4 28.8 30.4 5.7 16.0 60 48 36 37.0 10.3 19.0 64 51.2 38.4 39.2 11.9 20.0 67 53.6 40.2 40.8 13.1 20.7 72 57.6 43.2 43.6 15.0 22.0 77 61.6 46.2 46.3 17.0 23.2 84 67.2 50.4 50.2 19.7 25.0 90 72 54 53.5 22.0 26.5 94 75.2 56.4 55.7 23.6 27.5
100 80 60 59.0 25.9 29.0
Image Size (16:9)
Diagonal Width(W) Height(H)
inches inches inches inches inches inches
BCD
BC
D
37 32 18 26.0 2.5 17.0 40 35 19.7 28.0 4.0 18.2 83 72 40.5 53.5 22.0 33.2 92 80 45 59.0 25.9 36.5
(4:3)
(16:9)
www.necdisplay.com WT610E Page 3 of 9
Loading...
+ 6 hidden pages