NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
Contents:
Product Description and Notes Page 1
Tilt Angle and Rotation
Ventilation Requirements
Display Dimensions
Front, Top, Bottom & Right Side Page 3
Rear
Cosmetic Colors
Display Dimensions w/Optional Speakers and Stand
Optional Stand Dimensions
Optional Speaker Dimensions
Dimensions w/Optional Wall Mount
Connections
Control Codes
Product Description
Type: Plasma Monitor Screen Surface: Anti-Reflective
Resolution: 1024x768 Dimensions: 40.79”(W) x 25.36”(H) x 5.00”(D)
Aspect Ratio: 16:9 Weight: 81.6 lbs
FCC: Class B
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Do not install in the portrait position.
Landscape 20deg
Page 1
Page 2
Page 4
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
www.necdisplay.com
Max. 20 deg
P42XP10-BK Page 1 of 10
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
Ventilation Requirements (all models)
Dimensions below are minimum required for proper ventilation.
WALL
0 to 40 degC
50mm
2”
50mm
2”
32 to 104 degF
WALL WALL
2”
50mm
2”
50mm
2”
NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the
opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for
50mm
design review and recommendations.
www.necdisplay.com
P42XP10-BK Page 2 of 10
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
Display dimensions
38.27
36.69
34.33
0.87
FILTER PANEL SURFACE
30.31
2
1
.
TOP VIEW
0
0
0
.
8
5
2
.
3
3
5
.
1
2.36
1.6237.541.62
6
3
.
5
2
0
4
.
9
0.51
0
8
.
2
RIGHT SIDE VIEW
8
7
4
8
.
.
0
0
0
0
.
2
0
6
.
9
5
8
.
1
1
0
8
.
1
)
A
E
R
A
Y
A
2
L
7
.
P
1
S
2
I
D
L
E
N
A
P
(
3
4
.
0
2
0
8
.
1
6
4
.
2
36.28 (PANEL DISPLAY AREA)
LED
IR
19.70
40.79
14.80 3.23
0.40 0.33
POWER SWITCH
www.necdisplay.com
AC IN
16.51
18.50 (TERMINAL PANEL)
BOTTOM VIEW
P42XP10-BK Page 3 of 10
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
Display dimensions (cont.)
for PC
4-M4 Depth 10
for MOUNT UNIT
4-M8 Depth 16
1
8
.
1
1
4
2
.
8
for SPEAKER
8-M4
700
445
0
7
.
0
Label
0
0
.
7
0
0
.
7
8
2
5
0
.
.
3
4
4
4
.
0
0
7
.
0
0.63
23.78 (STAND)
0
4
.
4
REAR VIEW
www.necdisplay.com
P42XP10-BK Page 4 of 10
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
Dimensions with optional speakers and stand
23.78
3
8
.
6
0
0
.
5
2
3
.
2
4
5
.
1
3.15 0.04
1
2
.
4
1
26.50
47.17
2.80
3.150.04
6
3
.
5
2
6.80
0
5
.
1
16.40
www.necdisplay.com
P42XP10-BK Page 5 of 10
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
Optional Stand Dimensions (ST-P42P1)
0.79
0
2
.
2
0
0
.
3
7
8
.
0
8
0
.
0
Table Top Stand
ST-P42P1
0
8
.
2
1.77
7
7
.
1
9.66
0.79
13.60
16.4
°
0
.
°
1
7
.
+
0
-
°
0
9
Ø 0.39
6
9
.
5
6
5
.
1
www.necdisplay.com
P42XP10-BK Page 6 of 10
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
Optional Speaker Dimensions (SP-P42P1)
Optional Speakers
SP-P42P1
3.15 1.54
6
3
.
5
2
0.79
0.79
5
7
.
4
1
4-M4
INPUT TERMINAL
www.necdisplay.com
P42XP10-BK Page 7 of 10
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
Dimensions with optional Wall Mount Kit (WMK3260-L)
www.necdisplay.com
P42XP10-BK Page 8 of 10
Label
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
Connections
Speaker Terminal Connections
Located at bottom of display
Control Panel
Power Switch
www.necdisplay.com
P42XP10-BK Page 9 of 10
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
Control Codes
Function Code Data
POWER ON 01 30 2A 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03 18 0D
OFF 01 30 2A 30 41 30 43 02 43 32 30 33 44 36 30 30 30 34 03 1D 0D
INPUT SWITCH RGB1 (15pin HD) 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 31 03 18 0D
RGBHV 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 32 03 1B 0D
DVI 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 33 03 1A 0D
DVD3/HD3 (HDMI) 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 34 03 1D 0D
VIDEO1 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 35 03 1C 0D
VIDEO2 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 36 03 1F 0D
S-Video 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 37 03 1E 0D
DVD1/HD1 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 43 03 6A 0D
DVD2/HD2 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 44 03 6D 0D
AUDIO MUTE ON 01 30 2A 30 45 30 41 02 30 30 38 44 30 30 30 31 03 62 0D
OFF 01 30 2A 30 45 30 41 02 30 30 38 44 30 30 30 30 03 63 0D
PICTURE MODE BRIGHT 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 33 03 6E 0D
STANDARD 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 34 03 69 0D
CINEMA1 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 35 03 68 0D
CINEMA2 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 42 03 1F 0D
DEFAULT 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 43 03 1E 0D
SCREEN MODE: NORMAL 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 31 03 1B 0D
FULL 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 32 03 18 0D
ZOOM 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 33 03 19 0D
DYNAMIC 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 34 03 1E 0D
2.35:1 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 42 03 68 0D
14:9 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 43 03 69 0D
UNDERSCAN 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 44 03 6E 0D
TRUE 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 45 03 6F 0D
AUTO PICTURE ON 01 30 2A 30 45 30 41 02 30 30 31 45 30 30 30 31 03 6A 0D
OFF 01 30 2A 30 45 30 41 02 30 30 31 45 30 30 30 30 03 6B 0D
FILM MODE ON 01 30 2A 30 45 30 41 02 30 32 32 33 30 30 30 32 03 1E 0D
OFF 01 30 2A 30 45 30 41 02 30 32 32 33 30 30 30 31 03 1D 0D
NOTE: Contact your NEC rep for codes not listed.
NOTE: Use a cross/reverse/null modem cable.
Cable Connection
Communication Protocol:
Interface: RS-232C Parity: None
Communication: Asynchronous Stop Bit: 1 bit
Baud Rate: 9600 bps Communication Code: ASCII
Data Length: 8 bits
PC Control Connector (D-Sub 9P)
NOTE: If so desired, jumper “Request to send” and “Clear to Send” together on both ends of the cable to simplify cable connection.
These connections are not required. The only connections required are pins 2 (RxD), 3 (TxD) and 5 (GND).
www.necdisplay.com
P42XP10-BK Page 10 of 10
Loading...