Nec Audio-EMCEE Owners Manual

Audio Emcee

Users Guide

Installation

Programming
Instructions

Care and
Maintenance

Troubleshooting

Tips

NEC America, Inc.

Page 2

Page 3

Page 4

Page 5

Page 6

1

Document Revision 3

WARNING

To prevent fire or shack hazard, do not expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

For the customers in the United States Except for customers in the United States

This appliance is classified as a CLASS 1 LASER
product.

AC power cord must be changed only at the
qualified service shop.

This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product'

INFORMATION

This equipment has been tested and found to
comply to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instruction, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:

-Reorient or relocate the receiving antenna

-Increase the separation between the equipment
and receiver.

-Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected

-Consult the dealer or an experienced radio/TV
technician for help

CAUTION

You are cautioned that any changes or modification
not expressly approved in this manual could void
your authority to operate this equipment.

Do not install the appliance in a confined space,
such as bookcase or built-in cabinet.

To prevent fire, do not Cover the ventilation of the
apparatus with newspapers, table-cloths, curtains,
etc. And don’t place lighted candles on the
apparatus.

To prevent fire or shock hazard, do not place vases
on the apparatus.

Always properly dispose of
batteries.

This Class A digital apparatus complies with
Canadian ICES-003

CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT
USE THIS POLARIZED AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE

ABOUT THIS MANUAL

Tip

Instructions in this manual describe the controls on
the player.
You can also use the controls on the remote if have
the same or similar names as those on the player.

2

NEC America, Inc.

Document Revision 3

let e

player into a regular 110 electrical outlet, and not a battery back up

2) Using the audio cable, connect the player to the phone system. The end
with the adapter goes into the front of the CD Player and the other end goes
into the MOH Port located on your phone system. If your phone system
does not have a MOH Port, you’ll need to splice the cable into your phone
system.

MOH Port
(On Hold)

3) Program your messages. Refer to programming instructions on the next
page.

4) Adjust the volume. Call your main phone line from another line at your
location, and ask to be put on hold. If the sound quality is distorted, or the
volume is too low even when turned all the way up, contact Customer
Service at [phone].

NEC America, Inc.

Document Revision 3

3