NComputing X300 Users Manual

User’s guide for Xtenda

(X300 Series)

documentation is prohibited by law. All other brand- and produ ct na mes are trademarks of

registered trademarks of the respective owners.

Safety Instructions

The following instructions pertain to the risk of fire, electric shock or bodily injury.

Please read all of these instructions carefully.

- Do not use this system on an unstable cart, stand or table.

The product may fall, causing serious damage to the product.

- Slots and openings in the cabinet and the back have been provided for

ventilation. To ensure reliable operation of your computer, and to protect it

from overheating, do not block or cover these openings.

- Never push objects of any kind into the system through the cabinet

openings. Objects may touch dangerous voltage points or short out parts that

could result in a fire or electrical shock. Never spill liquid of any kind on the

product.

- This computer should only be connected to the adapter comes with your

system. If you want to use other adapter, consult your dealer.

- Do not allow anything to rest on the power cord. Do not locate this product

where people will walk on the cord.

- Unplug your system form the main electrical power outlet before cleaning.

Warning

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

- Do not use this system near water.

- Your adapter plug will only fit into a grounding-type power outlet. This is a

safety feature. If you are unable to insert or replace your obsolete outlet,

contact your electrician to replace your obsolete outlet. Do not defeat the

purpose of the grounding-type plug.

- To avoid generating an electric shock, be sure to plug the power cord into

the system before plugging it into the wall socket.

- For protection of your system and other devices during a lightning storm, or

when it is left unattended and unused for long periods of time, unplug the

computer and other devices form the wall outlet and disconnect the cable

form system. This will prevent damage to the system and other devices due

to lighting and power line surges.

FCC Information to Use

For enhancing the performance and the reliability of our product, We recommend that a user use the FTP or STP cable between X300 PCI Card and X300 Multi Box.

Note : This equipment has been tested and found to comply with the limit for a

Class B digital device, pursuant 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instructions. May cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. IF

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off nad on, the user is encourage

to try to correct the interference by one or the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

- Consult the dealer or an experience radio TV technician for help

Change or modification not expressly approved by the party responsible for Compliance could void the user’s authority to operate the equipment

Introductions

What is XtendaTM ?

Xtenda X300 allows you to extend your computer for additional users without any

hassle. Instantly up to 7 users can use the computer simultaneously and independently. NComputing’s patent-pending proprietary remote computing technologies including

SoC(System on Chip) based multi-user terminal processing, virtual termainal server

software and unique optimized protocol will scale efficiently your underutilized CPU

horsepower to share without sacrificing any speed.

Features of important chip

*** X300 PCI Card

z CPLD Device : ALTERA Cyclone EP1C6Q240 z PLD Device : ALTERA MAX EPM3128ATC100 z SDRAM : SAMSUNG K4S043232H-TC60

*** X300 Multi Box

z PLD Device : ALTERA MAX EPM3064ATC44

Features of I/O Ports

*** X300 PCI Card

z Three PC(RJ-45) Port

*** X300 Multi Box

z One PS/2 Type Keyboard z One PS/2 Type Mouse z One VGA Port z One PC(RJ-45) Port z One Speaker Jack

Speaker/Headphone Jack

PS/2 Keyboard Port

PS/2 Mouse Port

VGA Monitor Port

X300 PCI Card Connection Port

Power LED

X300 Multi Box

Connection Port

Overview

X300 PCI Card

X300 Multi Box

The X300 PCI Card ports are for connection with the X300 Multi Box only. They are not LAN ports for generic Ethernet connections. Connecting generic LAN devices may result in damage to the product .

※

The product may vary depending on your model type.

Installing the X300 PCI Card

Please follow the instructions below for installing the X300 PCI Card in the Host PC:

1 Disconnect all peripheral and power cables from the Host PC.

Remove the system cover of the Host PC.

3 Find an available PCI slot for the installation of the X300 PCI Card.

Remove the slot cover.

4 Insert the X300 PCI Card and secure the end of the card to the chassis with

a retaining screw.

5 Replace the Host PC cover and reconnect all peripheral and power cables.

󳦈󳦈

+ 11 hidden pages