NComputing U200 Users Manual

PC Expanion User’s Manual

(U200, U2000 Series)

documentation is prohibited by law. All other brand- and product names are trademarks of

registered trademarks of the respective owners.

Safety Instructions

- Do not use this system on an unstable cart, stand or table.

The product may fall, causing serious damage to the product.

- Slots and openings in the cabinet and the back have been provided for

ventilation. To ensure reliable operation of your computer, and to protect it

from overheating, do not block or cover these openings.

- Never push objects of any kind into the system through the cabinet

openings. Objects may touch dangerous voltage points or short out parts that

could result in a fire or electrical shock. Never spill liquid of any kind on the

product.

- This computer should only be connected to the adapter comes with your

system. If you want to use other adapter, consult your dealer.

- Do not allow anything to rest on the power cord. Do not locate this product

where people will walk on the cord.

- Unplug your system form the main electrical power outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for

Warning

cleaning.

- Do not use this system near water.

- Your adapter plug will only fit into a grounding-type power outlet. This is a

safety feature. If you are unable to insert or replace your obsolete outlet,

contact your electrician to replace your obsolete outlet. Do not defeat the

purpose of the grounding-type plug.

- To avoid generating an electric shock, be sure to plug the power cord into

the system before plugging it into the wall socket.

- For protection of your system and other devices during a lightning storm, or

when it is left unattended and unused for long periods of time, unplug the

computer and other devices form the wall outlet and disconnect the cable

form system. This will prevent damage to the system and other devices due

to lighting and power line surges.

FCC Information to Use

Note : This equipment has been tested and found to comply with the limit for a

Class B digital device, pursuant 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instructions. May cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. IF

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off nad on, the user is encourage

to try to correct the interference by one or the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

- Consult the dealer or an experience radio TV technician for help

Change or modification not expressly approved by the party responsible for

Compliance could void the user’s authority to operate the equipment

overview and Hardware installation of PC Expanion

1. Introductions

- Configuration of PC Expanion

2. Overview

- Front

- Rear

Installation device driver and NCU-2000/XP Software

1. Connecting PC Expanion to the Computer

2. Installing the Driver in Windows XP

Contents

3. Installing NCU-2000/XP Software

Unpacking the Box on PC Expanion

PC Expanion Specification

+ 10 hidden pages