NComputing L200, L120, L100 User Manual
PC EXPANIONUser s Guide
Fast Ethernet Version
1
Hardware specification regarding PC Expanion L100, L120, and L200
Dimension
Weight
Protocol
Serial Port*
USB port
Operating
System
8.46inch(W) x 6.30inch(D) x 1.57inch(H)
0.83 lb
WoIP (Windows® over IP) / LoIP (Linux over IP)
X
X
Windows® XP Home Edition
Windows® XP Professional
Windows® 2000 Professional
Windows® XP Media Center Edition
Windows® Server 2003
Windows® 2000 Server
Windows® Small Business Server 2003
Linux**
L100
9.57inch(W) x 5.31inch(D) x 1.57inch(H)
0.81 lb
WoIP (Windows® over IP) / LoIP (Linux over IP)
X
X
Windows® XP Home Edition
Windows® XP Professional
Windows® 2000 Professional
Windows® XP Media Center Edition
Windows® Server 2003
Windows® Small Business Server 2003
Linux**
L120
9.57inch(W) x 5.31inch(D) x 1.57inch(H)
0.82 lb
WoIP (Windows® over IP) / LoIP (Linux over IP)
O
O
Windows® XP Home Edition
Windows® XP Professional
Windows® XP Media Center Edition
Windows® Server 2003
Windows® Small Business Server 2003
Linux**
L200
The specifications of the product may be altered without any advance notice being given to individual users.
* Some restrictions apply
** Some restrictions apply. See website for details.
2
Trademarks
● Windows, Windows2000 Professional, Windows2000 Server,
Windows
XP Home Edition, WindowsXP Professional
and Windows
XP Media Edition, WindowsServer 2003, Windows
Small Business Server 2003 are trademarks of Microsoft Corporation.
● Intel
, Pentinum4, and Xeonare trademarks of Intel Corporation.
● PC Expanion
is a trademark of NComputing Corportaiton.
Disclaimers
● The manufacturer, importers and agencies are not responsible for any
accidental damage to the product or damage to the product which is
caused by improper use and operation of this product.
● The information in the User's Guide has been written based on the
specifications of current products. The manufacturer of the product,
NComputing Co., Ltd., continues to upgrade the product with
additional new functions, and will continue to improve the product
by applying new technologies.
● The specifications of this product may be altered without advance
notice given to individual users.
Symbols and descriptions for the correct and safe
use of the product.
The following instructions are for the correct use of this product and
must be observed in order to prevent any unexpected danger that may
occur to users or damage the product.
A user must read and follow this User's Guide instructions carefully
before use.
This sign indicates the
possibility of damage to the
product when instructions are
not followed.
This sign indicates important
information which a user must
read carefully in order to use
this device correctly.
This sign indicates helpful
information which a user can
refer to in order to use the
system correctly.
NoteWarning Note
Copyright
NComputing Co., Ltd. has all rights reserved in respect of this User's Guide
including patent rights, trademark rights, copyright and other intellectual
property rights. No part of this User's Guide may be copied or reproduced
in any form or by any manner without the prior permission of
NComputing Co., Ltd. The use of the contents of this User's Guide in whole
or in part may result in prosecution. The contents of software, sound
recordings and video images, which are registered for copyright, are
protected by copyright laws and other related laws. If any part of the
contents of this product, which have been registered for copyright, are
reproduced or distributed without permission, the legal responsibility lies
with the users. The company, organizations, products, characters and
events, which are used in the examples, are fictitious. NComputing Co.,
Ltd. does not have any intention of using actual companies, organizations,
products, characters or events anywhere in the User's Guide, and therefore
no such assumption is made. It is the user's responsibility to observe the
relevant copyright laws.
3
● Be sure that the place of installation is not too hot (temperature
above 35C degrees) or too cold (temperature below 0C degrees), or
too wet.
● Be sure to keep the mainframe safe from any severe impact.
● Be sure that the product does not come into direct contact with
benzene or paint thinner.
● Be sure that the product is not exposed to direct sunlight or any hot
machinery.
● Be sure to keep the product away from any items which have strong
magnetic properties.
● Do not disassemble, repair or rebuild the product.
● Do not leave a LAN (Local Area Network) cable in any passageway.
An electric shock, fire, damage to the product or physical injury may
occur as a result of tripping over the cable.
● Disconnect the LAN cable from the product when the cable is not in
use for a long period of time.
● Be sure to install the product in such a way that it is safe from
damage caused by dropping or falling.
Classifications and descriptions of signs
The following descriptions for the correct use of the product must be
referred to by the user in order to prevent any physical injury occurring
from unexpected danger, or any loss of assets which may be caused by
damage to the product.
A user must read this User's Guide carefully before use and follow
the instructions.
This equipment has been tested and found to comply with the limit for a
class B digital device, pursuant 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try and correct
the interference by one or the following measures:
● Reorient or relocate the receiving antenna
● Increase the separation between the equipment and receiver
● Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
● Consult the dealer or an experienced radio TV technician for help
Change or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Information to Use
4
● Any other operating systems including new operating systems require special
software, which can be purchased separately, or an upgrade of the software is
available at extra cost.
● This product is an independent terminal device which provides for the
emulation of Windows, not a computer. Unlike an existing computer there is no
need for the addition of auxiliary peripheral devices, or for the connection of
different types of communication devices, or for the modification of hardware.
The product does not support video images with a high picture quality or 3D
games which have to be supported by high performance computers.
When more than one user shares one computer by using this product, the settings
for related functions, which are provided by the Windows operating system, must
be carried out as an adequate safety measure. The file service by using the NTFS
(New Technology File System) method and environment settings in User Accounts
in Control Panel must be carried out in administrator mode in order to ensure the
security, easy maintenance and repair of the system. Please refer to the Windows
operating system for more detailed information.
* Some restrictions apply. See website for details.
Notice
Thank you for purchasing our company's product.
This product has been made by using state of the art technology from NComputing
and has undergone thorough testing. An understanding of reliability has been
reached for this product due to extensive testing. This User's Guide is designed to
help the user to achieve easy installation and use of the product. Our company
makes every effort to provide our customers with information related to the product,
and with answers for any questions that may be asked by our customers. The
performance of the product can be continuously enhanced via the software update
utility. (Please refer to the relevant section of the User's Guide for more detailed
information).The customer's registration and the registration of the product serial
number, which can be done via the Internet, enables customers to receive the
software upgrade service and ongoing technical support via the Internet for their
convenience.
● Please note that reproduction of the User's Guide in whole or in part, without
permission from the manufacturer, is not permitted.
● Please read the notes, which are related to safety, before use.
● The information in the User's Guide may vary depending on any improvements in
the product and the model type of the purchased product.
● The manufacturer is not responsible for any damage to the product that is caused
by using any products which are not specified as standard products, or by not
following instructions and procedures correctly.
● This product is compatible with Windows2000 Professional, Windows2000
Server, WindowsXP Home Edition, WindowsXP Professional, WindowsXP
Media Center Edition, WindowsServer 2003(Standard Edition/Enterprise
Edition), WindowsSmall Business Server 2003, Linux*
5
CONTENTS
Product Features
Part 1
NCT-2000-XP Installation
Part 2
Setting up Network Configurations
Part 3
Connecting to the network using a cable or DSL router 3-1
Connecting using a switch (Supports 100Mbps switching) 3-2
What is the PC Expanion? 1-1
Features 1-1
System Minimum Requirement 1-2
OS (Operating System) and Maximum Connection Limit 1-3
PC ExpanionConceptual Diagram 1-3
How to use the PC Expanion 1-4
Product Registration
Part 4
Selecting online Internet registration 4-2
Creating a product registration document in instances where
the Internet cannot be used for registration
4-3
Unregistration 4-6
Updating the NCT-2000-XP application via
the Internet
Part 5
NCT-2000-XP Remote Management Console
Part 6
Using the “Setup”
Part 7
6
Using the PC Expanion (Advanced)
Part 8
1. How to add a new user account 8-1
2. How to check the IP address setting of PC Expanion 8-5
3. How to check the IP address of the host PC. 8-7
4. How to connect between the PC Expanion and the host PC using network equipment. 8-9
5. How to connect the PC Expanion to the host PC directly 8-11
6. How to connect to the specific host PC 8-13
7. How to connect to the specific host PC automatically 8-16
8. How to log in automatically when the PC Expanion connects to the host PC. 8-18
9. How to send a message to the connected PC Expanion 8-20
10. How to start or stop running the NCT-2000-XP application 8-21
11. How to terminate an active PC Expanion. 8-22
12. How to see the screen running PC Expanion 8-22
13. How to control the running of the PC Expanion by an administrator 8-23
14. How to log in to the host PC automatically 8-24
15. How to set the timer for a ‘system shutdown’ message 8-24
16. How to enable or disable the function of sending a message 8-25
17. How to view and take control of the PC Expanion 8-26
18. How to stop the station automatically when the PC Expanion is disconnected 8-26
19. How to run both NCT-2000-XP program and an application using Windows RDP 8-27
20. How to see the background-bitmaps image of PC Expanion 8-28
7
21. How to set the password of the NCT-2000-XP program 8-29
22. How to use the USB port in case of L2XX model series 8-29
23. How to change the name of the PC Expanion 8-30
24. How to run a specific program when the PC Expanion connects to the host PC 8-31
25. How to manage grouped PC Expanions under the NCT-2000-XP program 8-34
26. How to manage when a user forgets the password of the NCT-2000-XP program 8-36
27. How to add or remove the serial number of NCT-2000-XP program 8-37
28. How to delete the PC Expanion on the list of NCT-2000-XP console 8-39
29. How to set the resolution and frequency on the PC Expanion 8-40
30. How to set the user ID and the password before the PC Expanion logs in to the host PC 8-42
31. How to uninstall the NCT-2000-XP program 8-44
32. How to assign an USB storage device 8-45
Troubleshooting against an error message
Troubleshooting about an error message that appears on the PC Expanion 9-1
Troubleshooting about an error message that appears on the Host PC 9-3
Part 9
Glossary
Regarding PC Expanion A-1
Regarding computer network A-1
FAQ
Appendix
1-1
Product Features
Part 1
What is the PC Expanion?
The PC Expanion is a unique networking device using WoIP(Windows over
IP) or LoIP(Linux over IP) networking standards. Users can share the
resources of the host PC system by connecting a PC Expanion terminal(s) to
it, providing the benefit of having several networked PCs. Users can connect
one or more PC Expanion terminals to one host PC directly using a LAN
adapter and cable or via the network using a switch/router.
Features
Cost Effective
Save up to 80% of hardware cost versus buying a Pentum4 or equivalent
PC; the PC Expanion gives any office or home the ability to expand any
existing host PC easily and affordably.
Compatibility
The PC Expanion will run Windows or Linux based applications on a host
PC; applications include Internet browsing, email, office suites, most
games and much more.
No Maintenance Required
Maintenance and upgrades only apply to the host PC. The PC Expanion
requires no hardware maintenance, only occasional software updates.
Small sleek design
Space saving design allows more room for your office or desk area.
Secure and Fast
Our proprietary Terminal Protocol allows for a fast and secure
environment using image caching and 128 bit encryption
*No noise output and low power consumption, quiet operations while saving energy costs.
Depending on the performance of the host PC, an application’s
compatibility and operating speed can vary. Refer to NComputing’s
web site for more information.
Note
1-2
System Minimum Requirement
The minimum hardware requirements
To connect one PC EXPANION terminal to a single host PC,
the following system requirements apply :
IntelPentium4 1.3 GHz processor with at least 512 MB RAM or higher.
To connect two to three PC EXPANION terminal(s) to a single host
PC, the following system requirements apply :
IntelPentium4 2.4 GHz processor with Hyper - Threading
technology with at least 512 MB RAM or higher.
To connect four to seven PC EXPANION terminal(s) to a single host
PC, the following system requirements apply :
IntelPentium4 3.0 GHz processor with Hyper - Threading technology
with at least 1024 MB RAM or higher.
To connect eight to ten PC EXPANION terminal(s) to a single host PC,
the following system requirements apply :
IntelPentium4 3.2 GHz processor with Hyper - Threading technology
with at least 2048 MB RAM or higher.
To connect 10-15 PC EXPANION terminal to a single host PC,
the following system requirements apply :
IntelPentium4 or Xeon3.0 GHz processor with at least 3 GB RAM or higher.
To connect 16-20 PC EXPANION terminal(s) to a single host PC,
the following system requirements apply :
IntelPentium4 or Xeon3.2 GHz processor with Hyper - Threading
technology with at least 4 GB RAM or higher.
To connect 20-25 five PC EXPANION terminal(s) to a single host PC,
the following system requirements apply :
IntelPentium4 or Xeon3.4 GHz processor with Hyper - Threading
technology with at least 5 GB RAM or higher.
To connect 26-30 PC EXPANION terminal(s) to a single host PC, the
following system requirements apply :
IntelPentium4 or Xeon3.6 GHz processor with Hyper - Threading
technology with at least 6 GB RAM or higher.
Do not use a notebook PC as a host PC. Using notebook PCs causes
power management and memory problems. Notebooks use
power-saving features and different technologies than a typical
desktop PC.
We recommend a 60GB and 7200rpm or higher hard disk drive.
Note
1-3
● Windows
2000 Professional : 10 units (L200 model does not support
this operating system.)
● Windows
2000 Server : 30 units (L200 model does not support this
operating system.)
● Windows
XP Home Edition : 10 units
● Windows
XP Professional : 10 units
● Windows
XP Media Center Edition : 10 units
● Windows
Server 2003 (Standard Edition / Enterprise Edition) : 30 units
● Windows
Small Business Server 2003 : 30 units
● Linux
*
: 30 units (the USB memory port of L200 model does not
support a USB device under Linux.)
* Some restrictions apply. See website for details.
OS (Operating System) and Maximum Connection
Limit
PC ExpanionConceptual Diagram
※ Maximum number of users can vary depending on host PC
configuration, type of OS and administrative settings.
PC EXPANION
Windows2000 Professional/Server
Windows
XP Home Edition/Professional/Media Center Edition
Windows
Server 2003(Standard/Enterprise Edition)
Windows
Small Business Server 2003
Linux
Host PC
1-4
How to use the PC Expanion
Install the PC Expanion (Refer to the Quick Installation Guide )
1
Install the NCT-2000-XP application on the host PC
2
Setup the network configuration
3
Turn on the PC Expanion, set up the PC Expanion
4
Click the “Connect” button
5
2-1
NCT-2000-XP Installation
Part 2
Insert the software installation CD into the CD drive.
Turn on the host PC and insert the Software Installation CD into the
CD drive after your computer boots up.
1
Click <Install Program> button.
The installation program will start automatically. When the installation
screen appears, click “Install Main Program”.
2
‘Preparing to install’ message appears.
This means that the program is checking the server to see if it has the
latest version.
3
Message similar to the one shown
here will appear if your Internet is not
connected.
If you have Internet
connectivity and Windows®
XP Service pack 2 is installed,
a message similar to the one
shown below will appear.
Click the “Ask Me Later”
button.
Note
The latest NCT-2000-XP program installation
If the server has the latest version, you will be asked if you want to
install the latest version as shown on the left below. Click “Yes” if
you want to install, or click “No” if you want to install the version on
the CD. The new version will be downloaded as shown on the right
below when installing. (It is recommended to select “Yes” to install
the latest version. The download may take some time depending
on the Internet speed)
4
2-2
Click <Next> button.
The installation program will start automatically. When the
installation wizard screen appears, click “Next”.
5
Click <Next> button.
If you click the <more> button, you will see a notice with the html
type.
6
Please make sure to DISABLE or UNINSTALL any Anti-Virus or
Firewall software that may be running in the background. Security
software of this type has been tested and known to interfere with
the installation and operation of this product.
Note
Select ‘I agree’ and then click the <Next> button.
Once the license agreement window appears, check "I agree" and click
"Next". If you do not agree with the license agreement, click the "Cancel"
button to finish the process. If you would like to print this out, please click
“Print.”
7
Select ‘I agree’ and then click the <Next> button.
When the NCT-2000-XP-Terms of Use window appears, check "I agree"
and click "Next". If you do not want to agree to the license, click "Cancel"
to finish the process. If you would like to print this out, please click
“Print”.
8
2-3
Click the <Next> button.
Read the contents of the readme file and click “Next”.
If you would like to print this out, please click “Print”.
9
Click the <Next> button.
Select the installation default folder and click "Next."
The “Program Files” folder is the default installation folder.
10
If you want to install it in another path, type the path directly or click
the <find> button and select the desired folder.
Note
Click <Next> button.
If the same screen as the one
shown on the right appears, select
the item that you want to install
after confirming the following
reference and click “Next.”
11
Administrator Password : If you set an administrator password,
the Network Administrator Console will require this password to
make changes within the console. You should remember the
"Administrator Password" for future configuration changes. If you
do not remember the password, you can't execute the program or
alter management settings.
( If you want to cancel the previous password, refer to “26. How
to manage when a user forgets the password of the NCT-2000XP program” in Part 8.)
Note
2-4
Network Control Console : A management application that
manages local user groups and can also manage individual
computers and the connected PC EXPANIONs
Click the <Next> button.
If you would like to review or
change any settings, click
“Back”. If you are satisfied with
the settings, click “Next” to
begin copying files.
12
Installing the NCT-2000-XP program
Refer to the following steps.
Gathering information for troubleshooting help ▶ Copying files ▶
Installation of service ▶ Remote management console installation
▶ the selected items installation ▶ Virtual audio device driver
installation
13
Add user accounts.
When the program installation is completed, the message screen for
adding new users will appear.(Refer to the screen) For more details,
please refer to "Create a new account" of operating system and “1. How
to add new user accounts” in Part 8.
14
Click the <Restart> button.
When this is completed you will be asked to restart the system (Refer
to the following screen). After checking "Yes, I want to restart my
computer now," click "Restart" to reboot your computer.
15
3-1
Setting up Network configuration
Part 3
You need to configure the network to connect with any PC Expanion
terminal(s). To configure your computer's network configurations, please
refer to the following :
Connecting to the network by using a cable or DSL
router
If you use a Cable/DSL router, you can use dynamic IP addresses. (To use
dynamic IP addresses, the router must support DHCP or a dynamic IP
address allocation function) If you want to use static IP addresses when
using a Cable/DSL router, refer to “Connecting by using a switch.”
Turn on the PC Expanion.
1
Click the <Setup> button on the startup screen of the PC Expanion.
2
With the L120 and L200 models, the list of host computers is
displayed in the startup screen of the PC Expanion. The other
products require using the “Connection to” drop-down list. If the
user clicks either <TS Options> within <Setup> or <Options>
within <Setup> after selecting “Autodetection,” the host computer
name is displayed automatically. The name of the host computer
will be displayed for up to 8 host computers. Click the <Connect>
button. Start using the PC Expanion.
4
Select the ‘Network’ tab. Then Select ‘Get Dynamic IP address’ and
click the <Save> button. (The PC Expanion uses the “Get Dynamic IP
address” option as the default. No additional settings are required.)
3
3-2
Connecting by Using a switch (Supports 100Mbps
switching)
To connect by using a switch, you need to set a static IP address on both
the PC Expanion terminal and the host PC.
To configure an IP address as static, follow these steps :
Turn on the PC Expanion.
1
Click the <Setup> button on the
startup screen of the PC Expanion.
2
Select the ‘Network’ tab. Then select ‘Use Static IP address’ option.
Type the IP address and the gateway. And then Click the <Save>
button. (If you do not know them, please contact a network
administrator.)
3
With the L120 and L200 models, the list of host computers is displayed in
the startup screen of the PC Expanion. The other models list the host
computers when a user clicks the “Connection to” drop-down list. If the
user clicks on either <TS Options> within <Setup> or <Options> within
<Setup> after selecting “Autodetection”, the host computer name is
displayed automatically. Click the <Connect> button. Start using the PC
Expanion.
4
4-1
Product Registration
Part 4
The user must be registered in order to receive continuous support such as
upgrades of the application software and after Sales service. The following
method can be used for registering the user via the Internet.
After clicking on the <Start> button on the Windows login screen,
please select the <All Programs ▶ NCT-2000-XP ▶ NCT-2000-XP
Internet Registration> in order to register.
1
The serial number and the activation key of the product, which the
user has purchased, must be registered via the Internet or by other
means. When you are formatting or modifying the hard disk, or you
are replacing the current computer with a new one after registering
the serial number, please unregister the serial number and the
activation key. Please take note that the serial number and the
activation key can be registered up to only 10 times if you fail to
unregister the serial number.
Note
When the message window on the right appears, please input the
‘Administrator Password’, and then click on the <Next> button.
(If the ‘Administrator Password’ has been registered, please click on
the <Next> button after inputting the ‘Administrator Password’)
2
If the 'Disable password protection' was selected during the
installation of the application, the message window for the
'Administrator Password' does not appear.
Note
Please click on the <Next>
button after inputting the
correct information in the
relevant boxes. For excellent
service in the future, please
make sure that all the
information you provide is
accurate.
3
4-2
Personal information protection policy
The NComputing Inc. highly values any personal information which
is provided by customers. NComputing Inc. observes the personal
information protection provision clause of the "laws related to the
use and promotion of information and communication networks"
and the "guidelines for personal information protection" which
were enacted by the Ministry of Information and Communication of
the Korean government. NComputing Inc. informs customers of
how and for what purpose personal information provided is used,
in accordance with the personal information protection policy of
the company. NComputing also informs the customer of what
measures have been taken by the company in order to protect the
customers' privacy. The personal information that customers
provide for registration, is only used for the purpose of updating
the software and providing technical support.
Note
Select the method of registration
●
Online : At present the host PC is connected to the Internet
●
Offline : The host PC is not connected to the internet
4
Please click on the <Next> button after selecting 'On Line - Register by
Internet'.
1
Selecting online Internet registration
This option is only available when the computer, which has the NCT-2000-XP
program, is connected to the Internet.
Please click on the <Next> button after selecting the serial number.
2
4-3
A window for user's information registration appears. Please click on
the <Back> button to correct the information, or click on the <Next>
button to continue the registration.
3
The registration of the serial number starts when all the information has
been inputted correctly. Please take note that if the computer is logged
off or the Internet is disconnected before the registration is completed,
the registration cannot be completed successfully.
4
Please select the 'Off Line - Register via File/Email, ' and then click
on the <Next> button.
1
Creating a product registration document in
instances where the Internet cannot be used for
registration
In instances where the computer with which the NCT-2000-XP
software has been registered with is not connected to the Internet,
please select the 'Off Line - Register via File/Email' and then create a
data file for offline-registration. Please send this file in an email as an
attached file to a supplier or an agent who can help you with the
registration of the serial number.
Please select the serial number with which you wish to register,
and then click on the <Next> button.
2
4-4
A window with user's information registration appears. After
checking the information with which the user has provided,
please click on the <Back> button to correct the information, or
click on the <Next> button to continue the registration.
3
Please select a directory for creating the offline registration file
and the name of the file, and then click on the <Next> button.
The destination of the storage is <My Documents>and the name
of the file is ‘RGF serial number.txt.’ To change the storage
destination please click on the ‘Change’ button and select a new
storage destination.
4
If you would like to change the path, click the <Change> button.
Note
The following message window will appear to inform of the successful
completion of the registration. Please send the stored file to the
registration center or agent. Please click on the <Finish> button.
((PPlleeaassee ddoo nnoott mmooddiiffyy tthhee rreeggiissttrraattiioonn ffiillee.. IIff tthhee rreeggiissttrraattiioonn ffiillee iiss
mmooddiiffiieedd,, wwee ccaannnnoott rreeggiisstteerr iitt..))
5
4-5
Please send the file to the registration center or agent. The registration
center or agent will send out a text file which can be used for registration
of the serial number. This option is used to register the serial number by
using a text file.
6
If you would like to cancel the registration before receiving the activation
key, you can select the “Offline – Cancellation of registration” option and
then select the serial number that you would like to cancel. After
cancelling the serial number, you cannot use the previous registration
file. You must repeat the registration process.
Note
There will be 2 six-digit numbers, a total of 12 digits, of the approval
number in the 'Activate Key' contained in the file with which has been
sent out by the registration center or agent. Please select the 'Off Line Key Input' and then click on the <Next> button.
7
After selecting the corresponding serial number, input the
approval number into the ' Activation Key' as seen below, and
then click on the <Accept> button. If the correct serial number
and the activation key has been submitted, the following message
window appears. Please click on the <OK> button, and then click
on the <Finish> button.
8
4-6
Please select the 'On Line – Unregister by Internet', and then click
on the <Next> button.
1
Unregistration
After registering the serial number, if you wish to replace the computer
which is currently being used with a new computer, or to modify the hard
disk, the serial number must be unregistered before cancelling the
installation of the NCX-2000-XP program.
Unregistration of the product via the Internet
This option is used to unregister the corresponding serial number in the
instance where the serial number was registered by using the 'On Line Register by Internet'. If the 'On Line - Register by Internet' option is used
for the registration of the serial number, please use the option to
unregister the serial number.
Please select the serial number with which you wish to unregister,
and then click on the <Next> button.
2
A window for the user's registration information appears. Please click
on the <Back> button to correct the information, or click on the <Next>
button to continue the registration.
3
4-7
Please select the 'Off Line -unregister via File/Email' option for
unregistration, and then click on the <Next> button.
1
Cancellation of registration Offline (File/Email)
Serial numbers can be unregistered offline in the same manner that they
are registered offline.
Please select the serial number with which you wish to
unregister, and then click on the <Next> button.
2
A window for user's information registration appears. After
checking the information with which the user has provided,
please click on the <Back> button to correct the information,
or click on the <Next> button to continue the registration.
3
The registration of the serial number starts when all of the information
has been inputted correctly. Please take note that the unregistration
cannot be completed successfully if the computer is signed off or if the
Internet is disconnected before the registration is completed.
4
4-8
A file creating process is required for the unregistration of the
serial number. Please confirm the destination of the storage and
the name of the file, and then click on the <Next> button. The
storage folder is ‘My Documents’ and the file name is ‘URGF serial
number.txt’. If you wish to change the storage location, please
click on the ‘Change’ button to select a new destination.
4
If you would like to change the path of where to save the file, click
the <change> button.
Note
Please send the created file to the registration center or agent.
The serial number cannot be used again once the unregistration is
completed. Please click on the <Finish> button.
5
5-1
Updating the NCT-2000-XP application via the Internet
Part 5
A user who has successfully completed the registration process can update
the NCT-2000-XP program by using the following methods.
Updating with the application installation CD which is included
In order to update the NCT-2000-XP program via the Internet, users must
have completed the registration process. Without registration, updating
the software will not be possible. User information must be saved
temporarily before installing the new version in order to protect the
private information of the user and to achieve safe and easy updates .
This process is required in order to have a backup in case an unexpected
problem occurs while trying to update the program with a new version,
so that the system can always return to where it was before.
Direct Updating via the Internet
This method can be used only when the user registration with the
previous version has been completed. (Please refer to "Part 2. NCT-2000XP Installation")
Please input the password in the space provided in the 'Enter
Password" message window, and then click on the <OK> button.
(This 'Enter Password" message window appears only if the
administrator password is set during the installation.)
2
Please click on the <Start> button on
the Windows logon screen, and then
select the <All Programs ▶ NCT2000-XP ▶ NCT-2000-XP Internet
Update> in order.
1
In order to continue updating, the <Internet Registration> process
must have been completed. If you have already completed the
registration process, please click on the <Register later> button to
continue the updating process. If you have not yet completed the
registration process, please click on the <Register Now> button to
complete the <Internet Registration> process and then execute
the updating process.
3
5-2
Please click on the <Connect> button so that the user can compare
the program in the NCT-2000-XP server against the program which
has been currently installed.
4
As shown in the picture below, the current version and the latest
version on NComputing’s Internet Server can be confirmed.
If there is a new version on the Internet server, please click on the
<Connect> button to start the updating process. The speed of the
download varies depending on the speed of the Internet
connection.)
5
If you do not want to install the latest NCT-2000-XP version right now,
save the program the file type and click the <Product information>
button. Then select the “Save the program in the disk” option. The
default folder is the installed NCT-2000-XP folder in the hard disk drive.
If you would like to save the file in another folder, please select another
folder. When you save the file in another folder, you must move the file
to the installed NCT-2000-XP folder in order to run the program.
Note
. When the download is completed, the installation of the program
starts in the same way as the 'Installation of the NCX-2000-XP
application.'
6
6-1
NCT-2000-XP Remote Management Console
Part 6
Remote management of the NCT-2000-XP is automatically implemented
with the installation. When the installation of the application is completed,
the NCT-2000-XP group is automatically created in the program group.
To confirm the installation of the NCT-2000-XP application, please click on
the <Start> button in the Windows operating system, and then select the
<All Programs ▶ NCT-2000-XP> in order.You also can run the NCT-2000XP application on the NCT-2000-XP program icon on the taskbar of
Windows.
Functions of the NCT-2000-XP program icon in the taskbar of
Windows.
There are some basic functions that can be accessed by rightclicking on the NCX-2000-XP icon which is in the 'Information area'
of the taskbar. Here are the differences between options of the host
PC and PC Expanion.
Note
<Host computer> <PC Expanion>
Please refer to each option for the function.
The option is that the
NCT-2000-XP is running.
NCT-2000-XP Management Console
The user can see the user ID, the
station information, and the host
computer name.
Station Information
6-2
When the user uses the PC Expanion, the user can set the status
of ‘Num Lock’ key or ‘Caps Lock’ key or ‘Scroll Lock’ key.
keyboard setting
The user can send a message to the connected PC Expanion or a
specific PC Expanion. For more information, please see “9. How to
send a message to the connected PC Expanion.” in Part 8.
NCT-2000-XP – Send Message
The user can stop running or start the NCT-2000-XP application.
For more information, please see “10. How to start or stop
running the PC Expanion.” in Part 8.
NCT-2000-XP Disable(Enable)
Run the NCT-2000-XP application
To confirm the installation of the NCT-2000-XP application, please click
on the <Start> button in the Windows operating system, and then
select the <All Programs ▶ NCT-2000-XP▶ in order. You also can run
the NCT-2000-XP application on the NCT-2000-XP program icon on the
taskbar of Windows.
1
Software Settings (Local)
There are items such as ‘Sessions’, ‘Information & Settings’ and ‘USB-
Device Assignment(s) under the ‘Software Settings (local)’ These option
can be used to check the status of the PC Expanion, change options,
and assign the USB storage device.
2
Loading...