Navman MiVue 358 User Manual

Welcome

Thank you for purchasing MiVue 358. This Quick Start Guide guides you through a successful setup
and familiarises you with the basic skills of using the recorder.

Precautions and notices

 For your own safety, do not operate the controls of the product while driving.

 A window mount is needed when using the recorder in a car. Make sure that you place the

recorder in an appropriate place, so as not to obstruct the driver’s view or deployment of
airbags.

 Make sure that no object is blocking the camera lens and no reflective material appears near

the lens. Please keep the lens clean.

 If the car’s windscreen is tinted with a coating, it may impact the recording quality.

1

Getting to know the recorder

Camera lens

OK key

Memory card slot

Power key

Speaker

Status indicator

Microphone

Menu key

Up key

Down key

2

Mini-USB connector

HD OUT connector

Reset switch

Inserting a memory card

CAUTION: Do not apply pressure to the centre of the memory card.

You have to insert a memory card before you can start recording.

The recorder supports MicroSD cards with up to 32GB capacity. You are
advised to use a Class 6 memory card with at least 8GB capacity.

Hold the card (MicroSD) at the edges and gently insert it into the slot
with the label facing the camera lens of your Navman Technology.

To remove card, gently push the top edge of the card inwards to release it, and pull it out of the
slot.

Note: Navman Technology does not guarantee the product’s compatibilities with MicroSD cards from all
manufacturers.

Note: Before you start recording, please format the MicroSD card to avoid malfunction caused by files not
created by MiVue 358. You can format the card on your computer or on MiVue 358 (pressing the Menu key

when recording is not in progress and then select the format feature).

Using your recorder in a vehicle

CAUTION:

 Select an appropriate location for mounting the device in a vehicle. Never place the device where the

driver’s field of vision is blocked.

 DO NOT insert or remove the memory card when operating the recorder.

3