Read the Operating Instructions carefully and completely before operating the unit. Be sure to keep the
Operating Instructions for future reference. All warnings and cautions in the Operating Instructions and on
the unit should be strictly followed, as well as the safety suggestions below.
INSTINST
INST
INSTINST
1 Water and Moisture - The apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
2 Heat - Do not use this unit near sources of heat, including heating vents, stoves, or other appliances that
generate heat. It also should not be placed in temperatures less than 5°C (41°F) or greater than 35°C
(95°F).
3 Mounting surface - Place the unit on a flat, even surface.
4 Ventilation - The unit should be situated with adequate space around it so that proper ventilation is
assured. allow 10 cm (4 in.) clearance from the rear and the top of the unit, and 5 cm (2 in.) from each
side. - Do not place on a bed, rug, or similar surface that may block the ventilation openings. - Do not
install the unit in a bookcase cabinet, or airtight rack where ventilation may be impeded.
5 Objects and liquid entry - Take care that objects or liquids do not get inside the unit through the
ventilation openings.
TION OF GRAPHICAL SYMBOLSTION OF GRAPHICAL SYMBOLS
TION OF GRAPHICAL SYMBOLS
TION OF GRAPHICAL SYMBOLSTION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
ALLAALLA
TIONTION
ALLA
TION
ALLAALLA
TIONTION
6 Carts and stands - When placed or mounted on a stand or cart, the unit should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the unit and cart to overturn or fall.
7 Wall or ceiling mounting - The unit should not be mounted on a wall or ceiling, unless specified in the
Operating Instructions.
WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRONIC SHOCK, DO NOTWARNING! TO REDUCE THE RISK OF FIRE OR ELECTRONIC SHOCK, DO NOT
WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRONIC SHOCK, DO NOT
WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRONIC SHOCK, DO NOTWARNING! TO REDUCE THE RISK OF FIRE OR ELECTRONIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTUREEXPOSE THIS APPLIANCE TO RAIN OR MOISTURE
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE
EXPOSE THIS APPLIANCE TO RAIN OR MOISTUREEXPOSE THIS APPLIANCE TO RAIN OR MOISTURE
CAUTION: TO PREVENT ELECTRIC SHOCK, MACAUTION: TO PREVENT ELECTRIC SHOCK, MA
CAUTION: TO PREVENT ELECTRIC SHOCK, MA
CAUTION: TO PREVENT ELECTRIC SHOCK, MACAUTION: TO PREVENT ELECTRIC SHOCK, MA
SLOTSLOT
, FULL, FULL
, FULL
, FULL, FULL
Y INSERY INSER
Y INSER
Y INSERY INSER
SLOT
SLOTSLOT
This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE
89/366/EEC, 92/31/EC and 93/68/EEC
Microsoft, HDCD, and the HDCD logo are trademarks, or registered trademarks of Microsoft Corporation in
the United States and/or other countries.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380,
5,978,762 and other world-wide patents issued and pending. “DTS”, “DTS-ES Extended Surround” and
“Neo:6” are trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc.
All Rights Reserved.
TT
..
T
.
TT
..
TCH WIDE BLADE OF PLUG TO WIDETCH WIDE BLADE OF PLUG TO WIDE
TCH WIDE BLADE OF PLUG TO WIDE
TCH WIDE BLADE OF PLUG TO WIDETCH WIDE BLADE OF PLUG TO WIDE
22
2
22
ELECTRIC POWERELECTRIC POWER
ELECTRIC POWER
ELECTRIC POWERELECTRIC POWER
1 Power Sources - Connect this unit only to power sources specified in the Operating Instructions, and as
marked on the unit.
2 Polarization - As a safety feature, some units are equipped with polarized AC power plugs which can
only be inserted one way into a power outlet. If it is difficult or impossible to insert the AC power plug into
an outlet, turn the plug over and try again. If it still does not easily insert into the outlet, please call a
qualified service technician to service or replace the outlet. To avoid defeating the safety feature of the
polarized plug, do not force it into a power outlet.
3 AC power cord - When disconnecting the AC power cord, pull it out by the AC power plug. Do not pull
the cord itself.
• Never handle the AC power plug with wet hands, as this could result in fire or shock.
• Power cords should be routed to avoid being severely bent, pinched, or walked upon. Pay particular
attention to the cord from the unit to the power socket.
• Avoid overloading AC outlets and extension cords beyond their capacity, as this could result in fire
or shock.
4 Extension cord - To help prevent electric shock, do not use a polarized AC power plug with an extension
cord, receptacle, or other outlet unless the polarized plug can be completely inserted to prevent exposure
of the blades of the plug.
5 When not in use - Unplug the AC power cord from the AC outlet if the unit will not be used for several
months or more. When the cord is plugged in, a small amount of current continues to flow to the unit,
even when the power is turned off.
CAUTIONCAUTION
CAUTION
CAUTIONCAUTION
Modifications or adjustments to this product, which are not expressly approved by the manufacturer, may
void the user’s right or authority to operate this product.
SAFETY INFORMATION
ENGLISH
MAINTENANCEMAINTENANCE
MAINTENANCE
MAINTENANCEMAINTENANCE
Clean the unit only as recommended in the Operating Instructions.
DAMAGE REQUIRING SERVICEDAMAGE REQUIRING SERVICE
DAMAGE REQUIRING SERVICE
DAMAGE REQUIRING SERVICEDAMAGE REQUIRING SERVICE
Have the unit serviced by a qualified service technician if
• The AC power plug has been damaged.
• Foreign objects or liquid have gotten inside the unit.
• The unit has been exposed to rain or water - The unit does not seem to operate normally.
• The unit exhibits a marked change in performance.
• The unit has been dropped, or the cabinet has been damaged
DO NOT ADO NOT A
DO NOT A
DO NOT ADO NOT A
OWNER’S RECORDOWNER’S RECORD
OWNER’S RECORD
OWNER’S RECORDOWNER’S RECORD
For your convenience, record the model number and serial number (you will find them on the rear of your set)
in the space provided below. Please refer to them when you contact your dealer in case of difficulty.
TTEMPT TO SERTTEMPT TO SER
TTEMPT TO SER
TTEMPT TO SERTTEMPT TO SER
Model No. :
Serial No. :
VICE THE UNIT YOURSELFVICE THE UNIT YOURSELF
VICE THE UNIT YOURSELF
VICE THE UNIT YOURSELFVICE THE UNIT YOURSELF
33
3
33
TABLE OF CONTENTS
44
4
44
TT
ABLE OF CONTENTSABLE OF CONTENTS
T
ABLE OF CONTENTS
TT
ABLE OF CONTENTSABLE OF CONTENTS
Safety InformationSafety Information
Safety Information
Safety InformationSafety Information
GETTING THE MOST FROM THE NAD T 762GETTING THE MOST FROM THE NAD T 762
GETTING THE MOST FROM THE NAD T 762
GETTING THE MOST FROM THE NAD T 762GETTING THE MOST FROM THE NAD T 762
UNPACKING AND SETUPUNPACKING AND SETUP
The T 762 A/V Surround Sound Receiver is a technologically advanced and highly capable product — yet we
have invested great effort in making it simple and easy to use. The T 762 delivers a range of genuinely
useful options for surround sound and stereo listening alike, using powerful digital signal processing and
superbly accurate digital-audio circuitry. However, we have also been careful to ensure that the receiver is
as musically transparent and spatially accurate as possible, incorporating much of what we’ve learned from
a quarter-century’s experience designing audio and home-theater components. As with all our products,
NAD’s “Music First” design philosophy guided the T 762’s design, such that it can confidently promise you
both state-of-the-art surround home-theater and audiophile-quality music listening for years to come.
We encourage you to take a few minutes now to read right through this manual. Investing a little time here
at the outset might save you a good deal of time later, and is by far the best way to ensure that you make
the most of your investment in the NAD T 762, and get the most from this powerful and flexible hometheater component.
One more thing: We urge you to register your T 762 ownership on the NAD Worldwide Web site:
< http://NADelectronics.com/w/Registration.html >
For warranty information contact your local distributor.
ENGLISH
55
5
55
UNPACKING AND SETUP
WHAWHA
T’S IN THE BOXT’S IN THE BOX
WHA
T’S IN THE BOX
WHAWHA
T’S IN THE BOXT’S IN THE BOX
Packed with your T 762 receiver you will find:
• An AM loop antenna
• A FM ribbon-wire antenna with balun
• A removable AC cable (if you wish, any IEC-standard AC cable of suitable wattage may be substituted).
• The HTR 2 remote control with 4 (four) AAA batteries.
• The ZR 2 zone remote control with 3V CR2025 battery.
• This owner’s manual.
Save the packaging
Please save the box and all of the packaging in which your T 762 arrived. Should you move or otherwise
need to transport your receiver, this is by far the safest container in which to do so. We’ve seen too many
otherwise perfect components damaged in transit for lack of a proper shipping carton, so please: Save that
box!
CHOOSING A LOCACHOOSING A LOCA
CHOOSING A LOCA
CHOOSING A LOCACHOOSING A LOCA
Choose a location that is well ventilated (with at least several inches to both sides and behind), and that will
provide a clear line of sight, within 25 feet/8 meters, between the receiver’s front panel and your primary
listening/viewing position—this will ensure reliable infrared remote control communications. The T 762
generates a modest amount of heat, but nothing that should trouble adjacent components. It is perfectly
possible to stack the T 762 atop other components, but the reverse usually should be avoided. Nonetheless,
it is generally preferable that the T 762 stand alone. It is especially important that sufficient ventilation be
provided; if you are contemplating locating the T 762 within a cabinet or other furniture, consult your NAD
audio/video specialist for advice on providing adequate airflow.
TIONTION
TION
TIONTION
66
6
66
Though the T 762 is among the most technically sophisticated A/V receivers, we worked hard to make it one
of the most musically transparent home-theater components available as well; this is what we mean by
NAD’s “Music First” design philosophy. Here are just a few examples:
• The T 762 uses NAD’s proprietary Power Drive™ amplifier technology for all channels to preserve
accurate, linear reproduction regardless of the loudspeaker. This uniquely efficient power-supply topology provides the real-world benefits of high dynamic power that remains uncompromised by lowimpedance speakers. The result is dynamic, detailed, “un-receiver-like” sound in stereo and multichannel
modes alike. NAD’s exclusive Soft Clipping™ circuitry further enhances sound quality and dynamic
potential.
• High-performance components used throughout the receiver’s analog audio circuits maximize quality from
all sources, including multichannel analog sources such as DVD-Audio and SACD.
• Preamp output (all channels) and main-amp input jacks make potential expansion as flexible as possible.
• A Second set of Speaker terminals (Speakers B) for remote listening.
• Second Zone (MULTISOURCE) pre-amp and video feed with assignable 12 V DC trigger control.
• An RS-232 port for advanced zone control through a Windows® compatible PC.
• Gold-surfaced connectors are employed throughout to ensure maximum signal integrity.
ABOUT THE T 762
ENGLISH
E.A.R.S., MAE.A.R.S., MA
E.A.R.S., MA
E.A.R.S., MAE.A.R.S., MA
A key element of the T 762’s unique musical aptitude is NAD’s proprietary Enhanced Ambience Recovery
System (EARS). In sharp contrast to many “ambience-synthesis” music-surround modes, EARS exploits the
T 762’s substantial DSP power to route the ambient content that is “encrypted” in virtually all naturalacoustic recordings to the appropriate main, center and surround speakers, without resorting to artificiallygenerated reflections or regeneration. EARS’ natural ambience yields a subtle but exceptionally effective
surround mode that naturally enhances the spatial presentation in a fashion suitable for serious music
listening. The T 762 also incorporates a second proprietary surround mode, Matrix 7.1. This creates a full
6.1/7.1-channel environment from stereo and surround-encoded recordings, oftentimes with extraordinarily
good results. Dolby ProLogic II Music and DTS Neo:6 Music modes can also create enjoyable experience
from 2-channel sources.
On the digital side, the T 762 combines extraordinarily high-speed DSP processing employing one of the most
advanced high-speed DSP “engines” available, with fully 24-bit, 192 kHz-sampling-capable D/A converters
for all channels. A single, high-precision master clock synchronizes all digital circuits to eliminate the timing
errors (“jitter”) that otherwise compromise sonics. The result is legitimately state-of-the-art surround
decoding from Dolby Digital and DTS sources, and 6.1/7.1-channel reproduction, with genuinely superior
sound quality in all modes.
EASE OF USEEASE OF USE
EASE OF USE
EASE OF USEEASE OF USE
Despite the effort NAD has invested in the T 762 receiver’s sonic performance, we expended no less in
making it powerfully easy to use. Its design is uniquely simple for so sophisticated a component, and the HTR
2 universal remote control is equally understandable, as are the T 762’s own front-panel and on-screen
displays. Its simple yet powerful system of “presets” permits you to fine-tune your listening setup for
different conditions, sources, or listeners, and to recall these multiple parameters with a single keypress.
INTEGRAINTEGRA
INTEGRA
INTEGRAINTEGRA
The T762 receiver offers extensive, flexible system-integration options through its configurable DC trigger
outputs and input, and its standard-protocol IR communications links. The DC trigger outputs can be
assigned to either Local and/or Zone locations.
TRIX AND DIGITTRIX AND DIGIT
TRIX AND DIGIT
TRIX AND DIGITTRIX AND DIGIT
TIONTION
TION
TIONTION
AL SURROUNDAL SURROUND
AL SURROUND
AL SURROUNDAL SURROUND
SECOND ZONE (MULSECOND ZONE (MUL
SECOND ZONE (MUL
SECOND ZONE (MULSECOND ZONE (MUL
The T762 receiver is equipped with a full second Zone control through the ZR 2 remote and the use of Video
and pre-amp level audio outputs. Complete access to volume, On/Off, all inputs including the local input is
available.
RS-232RS-232
RS-232
RS-232RS-232
Flexible system configuration is possible with the RS-232 interface and NAD’s proprietary Windows®
compatible software. This interface allows complete remote control of the T762 from any remote location
via the PC. Complete remote control functionality is available to the user by interface software. See your
NAD audio specialist for further information.
TISOURCE)TISOURCE)
TISOURCE)
TISOURCE)TISOURCE)
77
7
77
ABOUT THE T 762
UPGRADABILITYUPGRADABILITY
UPGRADABILITY
UPGRADABILITYUPGRADABILITY
The T 762 receiver permits flexible system growth via individually accessible pre-out and main-in jacks for all
three front channels, enabling external amplifiers to be used for any of these while still maintaining utility
of the receiver’s on-board power-amplifier channels for additional channels, remote-room links, or any other
suitable purpose. Of course, the T 762’s Surround Back channel outputs let a system grow from 5.1 to 6.1
or 7.1 channels, simply by adding a 1- or 2-channel external amplifier. See “Rear Panel (Audio Pre-Out),”
below.
ABOUT THE HTR 2 SYSTEM REMOTE CONTROLABOUT THE HTR 2 SYSTEM REMOTE CONTROL
ABOUT THE HTR 2 SYSTEM REMOTE CONTROL
ABOUT THE HTR 2 SYSTEM REMOTE CONTROLABOUT THE HTR 2 SYSTEM REMOTE CONTROL
Packed with your T 762 is the NAD HTR 2 remote control, a full-system remote especially designed to be easy
to use and easy to understand. Be sure to read the section “Using the HTR 2 Remote Control,” below, to
familiarize yourself with the remote’s layout and operations before proceeding to setup your receiver.
Chances are, you will want to use your HTR 2 as your primary way to command your entire A-V system. The
HTR 2 can be employed to operate additional NAD or other-brand components such as a DVD/CD player,
television, satellite/HDTV tuner, VCR, or virtually anything else that operates via standard infrared remote
control.
88
8
88
In case you simply cannot wait to experience the performance of your new NAD T 762 receiver, we provide
the following “Quickstart” instructions to get you underway. The steps below connect your DVD player to the
T 762’s DVD input; be sure to read “Input Setup”, below.
PLAPLA
Y A DVD MOVIEY A DVD MOVIE
PLA
Y A DVD MOVIE
PLAPLA
Y A DVD MOVIEY A DVD MOVIE
• Connect the T 762’s composite video or S-Video MONITOR OUT jack to your TV/monitor’s corresponding
input.
• Connect your DVD player’s composite video or S-Video output to the T 762’s corresponding DVD input.
• Connect the DVD player’s optical digital output to the T 762’s optical DIGITAL IN 1 input (Optical cable not
supplied).
• Connect your left and right front speakers to the T 762’s FRONT L and R outputs, being sure to connect
red to red (“+”) and black to black (“-”), with care to avoid stray wires or strands crossing between
terminals. (Connect center, surround, and surround-back speakers as well, if you like). If your system
includes a powered subwoofer, connect the T 762’s AUDIO PRE-OUT SW1, 2 or both jacks to its line
inputs.
• Press in the main power switch (green pushbutton) on the T 762’s front panel (this puts the T 762 into
STANDBY mode and illuminates an amber LED to indicate it is ready to receive remote commands), then
use the HTR 2’s [ON] key to power up the receiver. Be sure the TV/monitor is powered up, with the correct
input selected.
• Start playback of the DVD player. Press the HTR 2 remote’s [Amp] Device Selector key, and then its (red)
DVD/numeric 1 key to select the DVD input. You should hear multichannel or stereo sound, and see an
image on the TV/monitor. (If one or the other fails to appear, you may need to use the receiver’s on-screen
menu system to check assignment of audio, video, and digital inputs; see “Setting Up the T 762”, below.)
QUICKSTART
ENGLISH
Enjoy the movie or music, but be sure to set aside time to read this manual thoroughly, and to set up,
calibrate, and configure your T 762 carefully and completely.
99
9
99
Loading...
+ 20 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.