Motorola R750, iDEN r750plus User Manual

Download

Page 1

Motorola

iDEN®

Digital Multi-Servi ce Ph one

r750plus User’s Guide

11/17/00

@NTN9333A@

NTN9333-A

Page 2

Page 3

Table of Contents

Table of Contents.......................................... ..... ...... ........................... iii

Welcome ............................................................................................... 1

TTY Access...................... .... ... ..................................... ... .... .................. .... ... .. 2

Large-Print Manuals....................................................................................... 2

Features of your r750plus Phone.................................................................... 2

Attaching and Charging the Battery............................................................... 4

Attaching the Battery .............................................................................. 4

Detaching the Battery.......................... ... .... .................. .... ... .... ................ 4

Charging the Battery ............................................................................... 4

Battery and Charging Status.................................................................... 4

Turning On Your r750plus Phone.................................................................. 5

Turning Off your r750plus Phone ..................................................................5

Connecting the Supplied Antenna........................................................... 6

Keypad Lock.................................................................................................. 6

Activating Keypad Lock............. .................. .... .................. .... ... ............. 6

Receiving Incoming Calls....................................................................... 6

Receiving New Mail Messages............................................................... 7

Receiving Voice Mail ..............................................................................7

Receiving Private (Two-Way Radio) Calls............................................. 7

Deactivating Keypad Lock...................................................................... 7

Display Icons .................................................................................................. 8

About Modes and Menus ............................................................................... 9

Setting the Time and Date............................. .... ... ................... ... .... ................ 9

Changing the Display Language.................................................................. 11

Selectable Backlight Timer.......................................................................... 11

Making Phone Calls .......................................................................... 12

Using Other Dialing Methods...................................................................... 12

Scroll..................................................................................................... 12

Speed Dial............................................................................................. 12

Automatic Redial........... ... ................... ... .... .................. .... ... .................. 13

Last Number Redial .............................................................................. 13

Turbo Dial® Key................................................................................... 13

Plus Dialing........................................................................................... 14

Hands-Free Speakerphone..................................................................... 14

Receiving a Phone Call ............................................................................... 14

Ending a Phone Call ............................................ .... .... .................. ... .... ........14

What Is My Phone Number?........................................................................ 15

iii

Page 4

VibraCall® Alert ......................................................................................... 15

Selecting VibraCall Alert for All Incoming Calls and Messages......... 15

Selecting VibraCall Alert for Individual Services................................ 16

Setting the Ringer Volume .......................................................................... 16

Setting a Ring Style for the Alternate Line ..................................... 16

Additional Phone Services................................................................ 17

Call Waiting..................................... .... ... .... .................. .... ... .................. .... .. 17

Turning Off Call Waiting ..................................................................... 17

Call Hold............................................................................................... 17

3-Way Calling....................................................................................... 18

Alternate Phone Line................................................................................... 18

Setting the Active Line......................................................................... 18

Receiving a Call.................................................................................... 19

Receiving a Call on Your Alternate Line............................................. 19

Receiving a Phone Call Using Speakerphone ...................................... 19

Missed Call Indicator................................................................................... 19

Call Forwarding ..... ... .................. .... .... .................. ... .... .................. .... ... .... ...20

Unconditional Call Forwarding............................................................ 20

Conditional Call Forwarding................................................................ 20

Creating, Editing, and Using Stored Lists....................................... 22

Combined Phone Number and Private ID List..................................... 22

Entering Numbers............................................................................ 22

Entering Names............................................................................... 22

Storing Names and Numbers........................................................... 23

Pause Digit Entry............................................................................. 24

Editing and Erasing Phone List Entries........................................... 24

Editing and Erasing Private ID List Entries .................................... 25

Last 10 Calls Received and Sent Lists.................................................. 26

Quickstore of Phone Numbers.............................................................. 26

Making Private Calls......................................................................... 28

Scroll ................................................................................................28

Name Search.................................................................................... 28

Receiving a Private Call ............................ .... ... .................. .... .... .................28

Private/Group Mode Speaker .......................................................................28

Call Alert................. .................. ... .... .................. .... ... ................... ... .... ......... 29

Selecting a Call Alert Tone Style ................................................................29

Setting an Alert Tone Style ............................................................. 29

Sending a Call Alert..................................................................................... 29

Receiving a Call Alert .......................................................................... 29

Call Alert Queuing................................................................................ 30

www.mot.com/iDEN

Page 5

Table of Contents

Clearing or Queueing a Call Alert......................................................... 30

Responding to a Queued Call Alert....................................................... 30

Quickstore of Private IDs .............................................................................31

Storing Your Private ID ............................................................................... 31

Making Group Calls.......................................................................... 32

Receiving a Group Call................................................................................ 32

Adding and Storing a Talkgroup.................................................................. 32

Area Selection ..................... ... ................... ... .... .................. .... ... .................. .33

Private/Group Mo de Spe a ke ........................ .... ... ................... ... .... ...............33

Advanced Features............................................................................ 34

Multi-Simultaneous Talk Group Scan.......................................................... 34

Entering Group Mode............................................................................ 34

Initiating a Group Call........................................................................... 35

Responding to a Secondary Talkgroup ................................................. 35

Turning Scan On and Off ......................................................................36

Aliasing Talkgroup Mode ..................................................................... 36

Talkgroup Mode Selection by Direct Entry.......................................... 37

Talkgroup Mode Selection by Memory Scroll...................................... 37

Emergency Group Call................................................................................. 37

Placing an Emergency Group Call........................................................ 37

Canceling an Emergency Group Call.....................................................38

Receiving an Emergency Group Call.................................................... 38

Receiver Operations During an Emergency Call ..................................38

Status Message............................................................................................. 38

Entering the Status Message Function.................................................. 39

Selecting a Status Message with Direct Entry ...................................... 39

Selecting a Status Message Using Memory Scroll................................ 40

Selecting a Target by Direct Entry........................................................ 40

Selecting a Target by Memory Scroll ................................................... 40

Selecting a Target by Alpha Search...................................................... 40

Sending a Status Message..................................................................... 41

Exiting the Status Message Function.................................................... 41

Receiving a Status Message.................................................................. 41

ID List Programming ............................................................................41

Isolated Site Operation................................................................................. 42

Entering ISO 42

Initiating a Group Call ...........................................................................43

Exiting ISO............................................................................................ 43

Other Operations ................................................................................... 43

Using Mail Services........................................................................... 44

Page 6

Net Mail....................................................................................................... 44

Voice Mail.............................................................................................45

Alert Receipt During Phone Call.......................................................... 45

Message Mail............................................................................................... 46

Saving and Erasing Mail........................................................................46

Auto Call Back ......................................................................................47

Mail Memory Full............................ .... .... .................. ... .... .................. ...47

Using Your Phone as a Modem........................................................ 48

TTY Users ....................... ................... ... .... .................. .... ... ..............48

Setting Programming Menus............................................................ 49

About Error Codes........................................................................................54

Optional Accessories ........................................................................ 56

Batterie......................................................................................................... 56

Charging the Battery............................................................................. 56

Battery Operating Instructions.............................................................. 56

Rapid Travel Charger................................................................................... 57

Using the Rapid Travel Charger (110V/220V/240V) .......................... 57

Rapid Travel Charger Operating Specifications................................... 57

Vehicular Battery Charger ...........................................................................58

Using the Vehicular Battery Charger ...................................................58

Removing the Vehicular Battery Charger ............................................ 58

Operating Specifica tio ns.................. .................. .... .... .................. ... ...... 58

Desktop Dual-Pocket Charger .....................................................................59

Charging a battery................................................................................. 59

Data Operation.......................... .... ... .................. .... .... .................. ... .... .. 59

Inserting and removing a battery from the rear pocket......................... 60

Desktop Charger Statu s................ .................. ... .... .................. .... ... .......60

Desktop Charger Troub l eshoo tin g ............................... .... .... .................60

Audio Adapter ...................................................................................... 62

Using the Audio Adapter 62

Attaching/Detaching the Earpiece Microphone or Headset................. 62

Removing the Audio Adapter.......................................................... 63

Battery Belt Clip................................................................................... 63

Using the Battery Belt Clip .............................................................63

Leather Carry Case............................................................................... 63

Hard-Install Car Kit.............................................................................. 64

Remote Speaker/Microphone ............................................................... 65

Attaching and Removing the Swivel Clip....................................... 65

Connecting the Remote Speaker/Microphone to the Portable......... 65

Operation......................................................................................... 66

www.mot.com/iDEN

Page 7

Table of Contents

Safety and General Information...................................................... 67

RF Operational Characteristics .................................................................... 67

Exposure To Radio Frequency Energy ........................................................ 67

Portable Radio Product Operation and EME Exposure............................... 68

Antenna Care......................................................................................... 68

Phone Operation............................................ .... .... .................. ... .... ....... 68

Two-way radio operation...................................................................... 68

Body-worn operat ion. .... .................. .... ... .................. .... .................. .... ... 68

Data operation........................................................................................68

Approved Accessories........................................................................... 69

Electro Magnetic Interference/Compatibility ............................................... 69

Facilities................................................................................................ 70

Aircraft.................................................................................................. 70

Medical Devices...................... .... .... .................. ... .... .................. .... .............. 70

Pacemakers............................................................................................ 70

Hearing Aids ........................ .................. .... .................. .... ... .................. 70

Other Medical Devices ..........................................................................70

Use While Driving ................................................................................ 71

Operational Warnings....... .... .................. .... ... .................. .... .... .................. ... 72

For Vehicles Equipped with an Air Bag ................................................72

Potentially Explosive Atmospheres ......................................................72

Blasting Caps and Areas..................... .................. ... .... .................. .... ... 72

Operational Cautions.......................... .... .... .................. ... .... .................. .... ... 73

Antennas................................................................................................ 73

Batteries................................................................................................. 73

Cleaning and Drying Conside ra tio ns......... ... ................... ... .................. 73

Intrinsically Safe Radio

Information ........................................................................................ 75

FMRC Approved Equipment .......................................................................75

Repair of FMRC Approved Products ...........................................................77

Repair..................................................................................................... 77

Relabeling .............................................................................................. 78

Do Not Substitute Options or Accessories............................................ 78

Accessory Safety Information ..........................................................79

Warranty............................................................................................ 81

Patent & Trademark Information ...................................................89

Owner’s Information......................................................................... 93

vii

Page 8

Important!

Be sure to read “Safety and General Information” on page

67 before using your ph on e .

viii

www.mot.com/iDEN

Page 9

Welcome

ongratulations on purchas ing your Motoro la iDEN r750plus datacapable, multi -service, digit al portable phone. Superior features and state-of-the-art technology help to keep you in constant touch with all

your business and personal contacts. Your r750plus phone has so many new and exciting features! With wireless

access to the Internet, you can check on the latest news and weather, get stock quotes, send and receive e-mail, and download information from your computer. A missed-call indicato r lets you know that you received calls while you were away.

And new ease-of-dialing features, such as Turbo Dial Calls Received and Sent lists, help you to quickly make and return phone calls.

NOTE:Some features may be network dependent or subscription only, and

may not be available in all areas. Contact your service provider for more information.

The r750plus phone offers:

 key and the Last 10

•Phone Mode—for cellular phone operation.

See Page 12.

•Private Mode—for two-way radio use to talk with one person.

See Page 28.

•Group Mode—for two-way radio use to talk with several people. See Page 32.

•Net Mode—for accessing the built-in microbrowser.

See the Net Mode User’s Guide.

•Advanced Features—for monitoring multiple talkgroups, emergency calls, status messages, and Isolated Site Operation (ISO) functions. Dependent on Network and phone availability. See Page 34.

•Mail Services—for message, voice, and net mail. See Page 44.

•Fax and Data Transfer—for circuit data faxes and file transfers. See

Page 48.

NOTE: This manual describes the features of your phone as they were set up at

the factory. However, your carrier or your organizat ion m ay have changed or added features. For more information, check with your carrier or your organiza tio n.

This manual pro vides informa tion about how Net Mode works with various features of your r750plus phone. For information on us ing the microbr owser and other comp onents of Net Mode , see the Net Mode User’s Guide.

Page 10

TTY Access

TTY access is availab le on your phone. See the Wireless Data Services User’s Guide for complete instructions.

Large-Print Ma nuals

A large-print version of the pho n e’s User’s Guide is available. For more information on Motorola pro ducts for peo ple with disab ilities, c ontact Moto rola Customer Ca re at 1-800-453-0920 or TTY 1-877-483-284 0.

Features of your r750plus Phone

** Emergency Call Button (AFU only)

VibraCall

Status Light

Alert On/Off Button

Antenna

Volume Control/ List Buttons

Push-To- Talk (PTT) Button

Option Key On/Off Key

* Punctuation Key

Alphanumeric Keypad

* Back Key

Microphone

4 7

6 9

* These features are availabl e in the Net Mode browser.

Earpiece

Rubber Over-Mold Grip

Alphanumeric Display

Option Key

Scroll Keys

Send/End Key

Mode Key

* Home Key * Next Key

Speaker Key

Accessory Connector

** Emergency Call Key is orange; Vi braCall

NOTES: Remove the plastic film lens protector from the display before you

use your phone for the first time. Some keys have multiple uses. For more information, see the Net Mode User’s Guide . Press any key or button to turn on the keypad backlight.

Alert key is black.

www.mot.com/iDEN

Page 11

Antenna Install for optima l signal. Earpiece Hold to your ear to hear the other party. Volume Control/

List Butt ons Push-To-Talk

(PTT) Button

Mode Key Press to change modes. Emergency Call

Button

VibraCall Button

Alert

Press to adjust volume levels in Phone, Private, and Group modes.

Transmit a Private or G roup Call, or a Call Alert. Press and hold the PTT butt on t o ta lk; release it to listen.

Emergency Call Button: Activates Eme rge ncy Group Call feature (see

“Emergency Group

Call” on page 37).

VibraCall Alert Button: Turns on/off the VibraCall Alert featu re (see

“VibraCall® Alert” on page

15).

On/Off Key Press and hold to turn your r750plus phone on or

off.

Status Light Shows the phone’s status. See Table 2 on page 5 for

more information.

Punctuation Key Add punctuation in the Net Mode browser (within

T9™ Text Input).

Back Key Return to t he previous b r owser screen. Microphone Use to speak during calls. Rubber Over-Mold

Grip Alphanumeric

Display MENU Key Press to scroll throu gh m en u optio ns. Scroll Keys Press the left key to scr o l l backwar d or the right key

Option Keys Press the right or left option key t o sel ect th e m en u

SEND/END Key Press to answer an incoming Phone call. After

Alphanumeric Keypad

Next Word Key Press to display the next word ch oice in t he browser

Home Key Press to return to the browser Home menu. Speaker Key Press to hear incoming calls through th e earpiece o r

Accessory Connector

Hold the phone more securely and comf ortab ly wit h the rubberized grip.

View up to four lines (12 charac te rs pe r li ne) or six lines (16 characters per line) on the display.

to scroll forward through me nu options and lists.

option that appears in th e display directly abov e t he key.

entering a phone number, press to begin an outgoing Phone call or to redial the entered pho ne number. Press to end Phone calls.

Enter telephone n umbers, Private Call IDs, and alphanumeri c characters.

(within T9 Text Input).

the speaker during priv at e and group conversations. Connect battery charging, audio, and da ta

accessories.

Welcome

Page 12

Attachin g and C har ging th e Ba ttery

Attaching the Battery

1. Insert the battery bottom-end first into the battery guide holes on the housing of the phone.

2. Push the batter y for war d into the housing of the phone until it securely locks.

Detaching the Battery

1. Press down on the battery releas e butto n.

2. Pull on the battery and remove it.

Charging the Battery

You should charge your r750plus phone battery overnight before initial use. This allows your battery to achieve its maximum capacity and life.

Connect the charger to th e bottom of the r750plus phone.

NOTE: For more information on charging

the battery, see

page 56

“Batteries” on

Battery and Charging Status

A low battery is indicated by a short, chirplike sound throug h the speaker. The battery strength indicator icon shows the remainin g charge in your battery. Three ba rs indicates full charg e. As the charge is reduced through use, the bars progressively reduce from three to two bars, then one bar, then disappear. The indicator flashes when you have less than five minute s of talk time (see

Table 1 ).

www.mot.com/iDEN

Page 13

Table 1: Battery Charging Status

Icon Flashes

Welcome

Charging Low Battery 0-30% 31-

60%

Discharging Low Battery 0-10% 11-

40%

6190%

4170%

91100%

71100%

Tur ning O n Your r750pl us Phone

Press and hold the On/ Of f bu tto n f until a set of icons appears on your display. Next, a welcome message displays while the r750plus phone connects to your carrier’s network.

The Status Lig ht (LE D) indi cator on the r750plus phone shows the service state. See Table 2 .

Table 2: LED Indicator

Status Li ght

Indicator

Flashing Red

Solid Re d

Registering—your your carrier’s network. Please wait.

No service—your because it is outside your carrier’s service area.

r750plus phone status

r750plus phone is signing on to

r750plus phone cannot sign on

Flashing Green

Solid Green

Turnin g Off y our r750plus Phone

Press and hold the On/Off button f until you see the message “Powering Off”.

In service—your

r750plus phone is ready to use.

You can now place and receive calls. In use—your

r750plus phone is currently being used.

To make sure that you ended the last call, press e.

Page 14

Connecting the Supplied Antenna

Turn your r750plus phone off before installing or removing the antenna .

Insert the bottom of the antenna into the screw-in base on the top of the r750plus phone. Turn clockwise by hand until snug. Do not force.

NOTE: Connect only the supplied NAF5075 antenna to

the antenna connector on your r750plus as it is the only one th at h as b een t e s t ed for complian ce with Federal Communications Commission requirements and authorized by them for use on this radio product. Please see

page 67 of thi s manual for more information.

Keypad Lock

The r750plus phone includes a Keypad Lock feature that enables you to quickly lock the phone’s keypad to av o id ina dvertentl y pre s s i ng ke ys or pl a ci ng calls. Once Keypad Lock is activated, you can only per form the following tasks (unless you receive an incoming call, page, etc.):

“Safety and General Information” on

•Turn your phone On/Off

•Unlock the keypad

Activating Keypad Lock

Before locking your phone’s keypad, you may want to read this en tire section to learn how to respond to in coming calls, pages, etc.

From the Phone Ready screen, simultaneously press and #. The message Keypad Locked displays on your phone.

NOTE: Whenever a key is pressed, while in Ke ypad

Lock mode, the “Keypad Locked” message displays as a reminder.

adjb

Keypad Locked

Receiving Incoming Calls

When you receive an incoming phone call, keypad lock will be temporarily disabled. You may perform the following:

Press e to answer the call. Or,

• Press

o under “End” to send the call to voice mail and reactivate

keypad lock.

www.mot.com/iDEN

Page 15

Welcome

Receiving New Mail Messages

When you receive a new mail message (see “Using Mail Services” on page 44 for more infor m ation), th e keypad lock will be temporarily disabled. You may perform the following:

•

Press o under “Later” to return to Phone Ready and reactivate the lock. Or,

• Press o under “Now”. Press o under “Read”. Press o under

“Save” or “Erase”. Once you have finished, press

o under “Exit”

to return to Phone R eady and reactive the lock.

NOTE: If you have disabled the Message Mail Notification feature, only the

c icon will display. You will not receive the read Now/Later options.

Receiving Voice Mail

When you receive a new voice mail (see “V oice Mail” on page 45) keypad lock will be temporarily disabled. You may perform the following:

• When New Voice Mail Waiting displays, press o under “Exit” to

retur n to Phone Ready and reactivate the lock. Or,

• Press o under “Dial” to access Voice Mail service. Once you have

finished, press

# to exit Voice Mail, return to Phone Ready and

reactivate the lock.

NOTE: If you have disabled the Messag e Mail Noti fication, g icon will

display, however, “New Voice Mail Waiting” will not appear.

Receiving Private (Two-Way Radio) Calls

When you receive an incoming private (two-way radio) call (see “Receiving a Private Call” on page 28) the phone will automatically activate the applicable

mode. Once the call is te rmina te d and th e Displa y Tim er ha s expire d , th e phon e will return to Phone Ready and reactivate the lock.

Deactivating Keypad Lock

From the Phone Ready screen, si multaneously press * and #. The message Keypad Unlocked displays on your phone.

adjb

Keypad

Unlocked

Page 16

Display Icons

Display icons appear on the screen to inform yo u of e xisting c ondi tion s . S e e the following list.

The following icons may appear along the top of the display.

Signal Strength Indicator Shows the signal strength. Six bars indicate the strongest signal. Calls and messages may not be sent or received in no-signal areas.

Battery Strength Indicator Shows the remaining charge in your battery. Three bars show full charge. The indicat or flashes when you have less than five minutes of talk time remaining .

Voice Mail Indicate s that unplayed messages are waiting in your voice mail box.

New Message Mail Indicates that you have new tex t messages in your mail box.

Unread Message Mail Indicate s that you have unread Message Mail.

Vibrate All Indicates that the Vibrate All option is turn ed on. You will not hear a ring tone.

Call Forward Indicates that inco mi ng phone calls are being forwarded.

Active Line Indication Displays the active phone line (1 or 2).

Private/Group Speaker Indicates that the Priv ate/Group speaker is off. You will hear calls through the earpiece.

Packet Data Indicates packet data registration. The blinki ng arrows indicate send and receive activity. For more information, see the Wireless Data User’s Guide.

Some of the following icons may appear in the browser.

Secure Packet Data Connection Indicates that your packet data information is encrypted during transmission.

More Information Indicates that there is more text to read above, below, or above and below the cu rre nt screen.

www.mot.com/iDEN

Page 17

Welcome

About Modes and Menus

Modes and menu s are the navigational tools, providing access to the various features of your r750plus phone. Pressing the Mode key the mode choices. Pressing the Menu key

n takes you through the menu

options within each mode. There are four modes:

Phone—for cellular pho ne calls. See Page 12.

•

Private—for one-to-one radio calls. See Page 28.

•

Group—for radio calls with all individuals in a designated talkgroup. See

Page 32.

Net—for browser use. See the Net Mode User’s Guide.

•

To change modes:

m until you see the desired mode.

Press To select menu options:

m takes you through

n until you see the desired menu option, then press o under the d esi red

Press menu option to select it.

Setting the Time and Date

If your carrier provides this option, you can set your phone to display the current time and date. Unless the phone is turned off, it continues to display the current time during a loss of service.

You have a choice of a 12- or a 24-hour clock format. See Table 3.

NOTE: When this feature is activated, your phone automatically displays local

time.

Table 3: Time Display Options

12-Hour Di s pla y 24-Hour Display

12:00a 00:00 6:25a 06:25 12:00p 12:00 6:25p 18:25

Page 18

You have a choice of either a MM/DD (month/day) or a DD/MM (day/month) date format. See Table 4 :.

Table 4: Date Display Options

Date

Month/Day Form at

(MM/DD)

Day/Month Format

(DD/MM)

January 2nd 01/02 02/01 January 31st 01/31 31/01 October 9th 10/09 09/10 December 31st 12/31 31/12

If your carrier activates the time and da te , th ey ar e displa y ed on the third lin e in all modes (P hone , Pr ivat e, G rou p, N et). Th e tim e of d ay i s als o sho wn dur ing a n active Phone call. The time and date are not displayed in Group mode when you select an Area option.

To set the time and date format:

1. Press

*, #, 7, 1.

2. Select “Ok”. The Time/Date screen displays.

adjb

71=Time/ Date

Exit Ok

The default (preset) time and date format that displays depends on your carrier. You can accept the default format or select an alternate forma t.

3. Press r until you see the Time Format screen.

4. Do one of the following:

• To use the 12-hour format, go to the next st ep.

• To use the 24-hour format, select “24hr”. (See

Table 3 on page 9.)

5. Press

r until you see the

Date Format screen.

6. Do one of the following:

7. To use the MM/DD format, se le ct “Exit”.

8. Or to use the DD/MM format, se lect “DD/MM”, t hen “Exit”. (See Table 4 on pa ge 10.)

adjb

71=Time/ Display:On

Exit Off

adjb

Time Format 12 Hour

Exit 24hr

adjb

Date Format: MM/DD

Exit MM/DD

www.mot.com/iDEN

Page 19

Welcome

9. Select “Exit” again to leave the Time/Date Programming option. The Ready screen for each mode (Phone, Group, Private, and Net) now displays the selected time and date formats.

Changing the Display Language

You can customize your r750plus phone to di splay one of four languages: English, French, Spanish, or Portuguese.

To change th e displayed language:

1. Press

2. Select “Ok”.

3. When th e desired language appears on your display,

4. Select “Exit”.

*, #, 7, 0.

Press l or r to scroll through the language option s.

Selecting “Exit” at any time retain s the curr e nt languag e selection.

select “Ok”. The displayed text immediately changes to the selected language.

adjb

70=Language English

Exit Ok

adjb

Language Français

Cancl Ok

The language that you select will be the displayed language.

Selectable B ack li ght Tim er

Your phon e ’s backlight is what illuminates th e display when you receiv e or make calls. Thr ough your Programming Menu (*,#,16), you can customize the amount of time that your backlight remains illuminated: 0, 10, 20, or 30 seconds. By choosing zero (0) seconds, all keypad backlighting, and the Status Light, remains off (is disabled). This means, when choosing 0 seconds, the

r750plus phone enters completely dark mode. See “Setting Programming Menus” on page 49 for more information.

Page 20

Making Phone Calls

In addition to making and receiving phone calls in Phone mode, you can forward calls, use call waiting, put calls on hold, and create and use stored lists. Phone Ready is the main screen.

NOTE:See “Additional Phone Services” on page 17 for more information.

You can place a cal l by entering the phone number on the keypad.

1. From the “Phone Ready” screen, us ing the keypad, enter the desired number.

If you make a mistake, press l once to move back one digit, or sele ct “Cancl” to start over.

2. Press e to place the call.

3. To end the call, pr ess

e .

Using Ot her Dia ling Metho ds

adjb

Phone Ready Line1

10:42a 11/06

Exit Ok

To use other dialing methods such as Scroll, Speed Dial , or Name Search, names and numbers must be programmed into your phone. See “Creating, Edi t ing, and Using Stored List s” on Page 22.

Scroll

1. From the Phone Ready screen, press l or r to scroll backward or forward through the stored list of numbers and names.

2. Press

3. To end the call, pr ess

e to place the call.

Speed Dial

1. From the Phone Ready screen, press n until you see the “Spd#” option on the last line of your display.

2. Select “Spd#”.

3. Enter the assigned speed-dial number (1-100). You will see the stored name and phone number associated with the speed dial number.

4. Press

5. To end the call, pr ess

e to place the cal l.

www.mot.com/iDEN

Page 21

Making Phone Calls

Name Search

1. From the Phone Read y screen, select “Name”.

2. Using the keypad, enter the first letter of the desired name, for exam ple, to search for the name Bob:

3. Enter “B” by pressing

4. Press

r to scroll through all the names starting with “B” until you see

“Bob”.

5. Press

e to place the call.

6. To end the call , press

Automatic Redial

If you receive a “System Busy, Try Later” message, press e to have your phone automatically redial the number. You will hear a ring-back tone when the call is successful.

2 twice.

Last Number Redial

To redial the last numb er th at you called, press e.

Turbo Dial

Turbo Dial key enables you to quickly place a phone call by simply pressing and holding the numeric key on the keypad that corresponds to the stored ent ry in your Phone list directory. T here are nine Turbo Dial positio ns, 1 through 9.

NOTE: If you are on a Phone call, place the call on hold before using Turbo

From the Phone Ready screen:

1. Select one of the first nine entries in the Phone list using key numbers 1 through 9. For example, press

1 for Turbo dial #1. Keypad number 0 is not avail- able for Turbo Dialing.

2. Press and hold the desired key for two seconds to activate the Turbo Dial key. The phone begins to dial the number and “Phone Ready” changes to “Phone-In Use”.

Key

Dial key.

adjb

Phone Ready 1

Cancl

adjb

Phone-In Use Office

12:45p 10/18

Page 22

Plus Dialing

This feature enables you to place an International call from any country -without enteri ng t he local international access code.

1. Press and hold that precedes the appropriate international access code needed to place the call.

2. Enter the international telephone number.

3. Press

Hands-Free Speakerphone

The r750plus phone provides the conven ience of a speakerphone for holding impromptu meetings or lis tening to your voice mail messages.

During speakerphone operation, you may either speak or listen, but you cannot do both at the same time.

To use the speakerphone:

1. Select “Spkr.” The “Spkr” option flashes while the speakerphone is on.

2. Place the phone 15-30 inches (38-76 cm) away from you. In a noisy envi ronment, you may want to move the r750plus phone closer to you for better transmission.

0 for two seconds. A “0” appears, then changes to a “+”

NOTE: If there is background noise in your area , yo u may have difficulty

hearing a caller’s voice or messages. To res olve this problem: (1) Press (2) To listen, press

“Phone-In Use” to “Phone-Mute”, indicati ng that the microphone is muted.

(3) To speak, pressounder “Mute” again. The display changes from “Phone-Mute” to “Phone-In Use”, indicating that the microphone is on.

While the microphone is muted, you can hear incoming audio, but a caller cannot hear any speec h coming from your r750plus phone.

n until you see the “Mute” menu option.

o under “Mute”. The display changes from

Receivin g a Pho ne Ca ll

Press one of the foll owi ng keys: e, or *, or #. Or press any numeri c key (0 through 9). To activate the speakerphone option, select “Spkr.”

adjb

Incoming Phone Call

End Spkr

Ending a Phone Call

Press e.

www.mot.com/iDEN

Page 23

Making Phone Calls

What Is My Pho ne Num ber?

Press *,#,1 to display your own phone number.

adjb

VibraCall® Alert

VibraCall Alert is a vibration alert system that notifies you of incoming Messages, Phone, Private, Group, and Data calls. You can set a vib ration alert for all services or for in di vidual services.

When you set vibration alerts, they are set only for the current line. If you have a second phone line, you must select that line and repeat the procedure for selecting all services or selectin g indi vi dua l service s to vibrate .

The alert choices are:

• Vibe All—produces a vibration alert for all incoming calls and messages.

• Phon e Vibrate—produces a vibration alert for incoming phone and circui t-

data calls.

• Phone V ibrate/Ring—produces a vibration alert followed by a ring tone for phone and circuit-data calls.

• Ma il Vibe—produces a vibration alert for mail messages and net alerts.

• Grou p/Prvt Vibe—produces a vibration alert for incoming group and

private calls.

1=Own Ph# 9545553434

Exit Edit

NOTE: If VibraCall Alert is set for incoming calls and messages, the power-up

sequence includes a brief vibrate cycle.

Selecting VibraCall Alert for All Incoming Calls and Messages

Advanced Feature Units (orange button on top of housing): To set a vibration alert for all inc oming calls an d

messages:

1. Press*,#,9.

2. Select “All”. You will receive a brief vibration alert.

After you set the alert, the display returns to the previous mode and

q (the Vibrate All icon) app ears at the top of

your display.

All Other (Non-Advanced Feature) Units (black butto n on top of housing): Perform the same steps as described above, or press the black button on top of the r750plus phone.

adjb

9=Vibrate Alert:Off

Exit All

aqjpb

Phone Ready Line1 Vibe

10:54a 12/09

Name Mail

Page 24

Selecting VibraCall Alert for Individual Services

To set a vibration alert for specific phone or mail services:

1. Press

2. Press

3. Select “Selct”. The first choice is Phone Vibrate.

4. To view the Vibe/Ring vibration al ert choices, press

5. To view other choices, press

*,#,9. n until you see the

“Selct” menu option.

n on the keypad.

• To receive vibration alerts only for Mail, select “Mail Vibe”, then select “On”.

• To receive vibration alerts for Group and Private calls, select “Group/Prvt”, then select “On”.

adjb

9=Vibrate Alert:Off

Exit All

adjb

9=Vibrate Alert:Off

Selct

adjb

Phone Vibrate:

Vibrate Off

Exit Vibe

6. Select “Exit” to return to the Vibrate Alert menu.

7. Select “Exit” again to return to the previous mode.

adjb

Group/Prvt Vibe:Off

Exit On

Setting th e Ringe r Volume

You can adjust the ringer volume for incoming calls. If you have a second phone line, you must set each line separately. Be sure to select the desired line before setting the volume.

1. Press

2. Press the Volume Control buttons on the side of the

3. When you reach the desired level, select “Exit”.

Setting a Ring Style for the Alternate Line

*, #, 3, 0. The “30=Ringer Volume”

screen disp la ys.

The display shows your current ring er volume.

phone to listen as you raise or lower the volume. At the lowest setting, the screen displays “Ringer Volume Silent”.

adjb

30=Ringer Volume

Exit

1. From the Phone Ready screen, press n until you see “Line2”.

2. Select “Line2”.

3. Repeat the procedure for "Setting an Alert Tone Style", above.

www.mot.com/iDEN

Page 25

Additional Phone Services

NOTE:Some features may be network dependent or subscription only, and

may not be available in all areas. Contact your service provider for more information.

Call Waiting

Using the Call Waiting feature, you can answer an incomin g call when you are on another call. Call Waiting is on unless you turn it off for a particular call.

1. After the alert tone, your display shows the incoming number and asks “Accept Call?”. To accept the call, select “Yes”. To decline the call, select “No”.

2. Press

n, then select “Hold” to place the second call

on hold and return to the first call. Selecting “Hold” switches you between the two calls.

3. To end the acti ve call, press

adjb

5551212 Take Call

On Line 1

No Yes

adjb

Call 1-Hold 5551212

10:54a 12/09

Hold Name

Turnin g Of f Call Waiting

You can turn off Call Waiting if you do not want to be interrupted during a call.

1. Press

n until you see “Wait”, then select “Wait”.

2. Select “Off”. Call Waiting will be d isa ble d for o ne ca ll—b ut will au tom atically reset to “On” after that call.

Call Hold

When you are on a call, you can place the call on hold and make a second cal l.

1. To place the active call on hold, press then answer or place another call.

2. To remove t he call from hold, press

n, then select “Hold”. You may

n, then select “Hold” again.

Page 26

3-Way Calling

If your carrier provides 3-way calling, you can combine two ongoing phone calls into one conversation. This option is available only when you initiate the second call.

After you place or receive a phone call:

1. Select “3way”. This action places the current call on hold.

2. Enter the ph one number for the second call and press

3. When the second call is connected, select “3way” to join the calls. Both phone numbers and “3way” appear on your screen.

4. To end the 3-way ca ll, pr es s

Alternat e Phon e Lin e

If your phon e is activated with two phone line s , you can switch bet ween them. To change phone li nes, your phone must be at the Phone Ready screen. The following settings are independent for each phone line. When you enable a setting, it applies only to the active line.

• Ringer Volume

adjb

Phone-In Use 5551212

10:42a 11/06

Hold 3way

• Auto Answer

• One-minute Beep

• Automatic Display Timer

• Resettable Timer

• T otal Call Timer

• Selectable Ring Styles

• Call Forwarding

Setting the Active Line

At the “Phone Ready” screen:

1. Press

2. Do one of the following:

Outgoing calls will be made on the selected line.

n until you s ee “Line2”. (If you are on Line 2,

you will see “Line1”.)

• Select “Line2” to activate Line 2 when Line 1 is the active line.

• Or, select “Line1” to activate Line 1 when Line 2 is the active line.

adjb

Phone Ready Line1

11:48a 08/21

Line2

www.mot.com/iDEN

Page 27

Additional Phone Services

Receiving a Call

You can receive calls on either line, regardless of the active line setting.

• If you receive a call on the currently active line, that icon simply flashe s.

• If you receive a call on the line that is not currently active, the active line

icon remains lit and the alternate line icon flashes.

Receiving a Call on Your Alternate Line

1. Select “Yes” to answer the call on the other line. Your previous call will be placed on hold.

2. Do one of the following:

• To end the call, press

• Or, to place the current call on hold, or to toggle between calls, press

n, then select

“Hold”.

When the call ends, the phone remains active in the last active line selected.

adjb

3055551212 Accept Call

On Line 2?

No Yes

Receiving a Phone Call Using Speakerphone

Select “Spkr” to activate the speakerphone.

Missed Call Indicator

Your r750plus phone notifies you of received, but unanswered, phone calls. If you subscribe to Caller ID, the caller’s phone number is stored in your Last 10 C a lls Received list. Your screen displays a flashing message, for example, “2 Rcvd Ca lls”, with the numbe r of missed calls.

Press any key to clear the flashing indicator. To retrieve the missed calls:

1. From the Phone Read y screen, press options change to “Calls” and “Spd#”.

2. Select “Calls”. The Rcvd Calls screen opens wi th th e number, time, and date of the last call that you received.

3. Scroll to continue viewing the list.

n. The menu

adjb

Phone Ready Line1

2 Rcvd Calls

Name Mail

adjb

Phone Ready Line1

10:42a 11/06

Calls Spd#

adjb

Rcvd Calls 1=5552222

10:42a 11/06

Cancl Store

Page 28

Call Forwarding

Call forwarding lets callers reach you wherever you are. You have two options: forward all incoming cal ls (unconditional) or se le ct those circumstances (conditional) when you want your calls forwarded.

Unconditional Call Forwarding

Unconditional call forwarding sends all incoming calls to the designated number.

NOTE: When you set unconditional call forwarding, your phone does not ring.

1. From the Phone Ready screen, press n until you see “Forwd” on the last line of the display.

2. Select “Forwd”.

3. To select the number where you want you r cal ls for-

warded, do one of the following:

• Enter a number.

• Or, press the scroll keys to select a number

from your store d list.

4. Select “On”.

5. After the “Please Wai t” message displays, select “Exit”.

6. Notice that the Call Forward icon z appears on your disp lay whe n Un con-

ditional Call Forwarding is set.

adjb

Phone Ready Line1

9:06a 9/03

Forwd Spd#

adjb

Forwd:Off To:5551212

Exit On

Conditional Call Forwarding

You may want to forward your calls when your r750plus phone is:

• Busy on another call or accessing the browser (Busy)

• Not answered (NoAns)

• Outside the service area (NoRch).

NOTE: You must tur n off Unc ondi tion al Call Forwar di ng before you can set

Conditional Call Forwarding options.

1. From the Phone Ready screen, press n until you see

“Forwd” on the last line of your display, then select it.

adjb

Phone Ready Line1

9:06a 9/03

Forwd Spd#

www.mot.com/iDEN

Page 29

Additional Phone Services

2. Press n once again until you see “Busy” and “NoAns” on the last line of your display.

3. To forward your ca lls wh e n yo ur ph on e is in use, select “Busy”.

4. To forward your calls when you do not want to answer them, select “NoAns”.

5. Press

n again until you see “NoRch” and “Rcl#”.

• To forward your calls when you canno t be reached, select “NoRch”.

• To see the call forward number, select “Rcl#”.

adjb

Forward:Off To:

Busy NoAns

adjb

Forward:Off To:

6. After you select the call forward option, either enter the number where you want your calls to be for warded, or press the scroll bu ttons and select a number.

7. Select “On”.

8. Select “Exit”.

9. You can se t more than one condition by repeating steps 2 through 6.

NoRch Rcl#

Page 30

Creating, Editing, and Using

Stored Lists

A stored list is a directory of phone numbers and Private IDs and their related names. Store d lists are co nvenient beca u se you do not have to re m e mb e r na me s and number s —you simply scroll through your stored list .

Combined Phone Number and Private ID List

You can set a combined Phone and a Private ID with the associated name, which eliminates the need to program the Private ID separately. You can add up to 100 numbers to your Phone list, store them with names, and assign them to speeddial number s .

Entering Numbers

To enter a number, press the corresponding ke y on the keypad.

Entering Names

To enter a letter, press the key the required number of times, which is related to the letter’s position on t he key. Table5 describes how to enter each letter on the

7 key.

Table 5: Entering Letters and Numbers on the Keypad

To en ter:

P once.

Q twice.

R three times.

S four times.

Press

five times.

To shift to lowercase letters, press and hold # after a letter is entered.

www.mot.com/iDEN

Page 31

Creating, Editing, and Using Stored Lists

Storing Names and Numbe rs

1. Press *,#,2,0.

2. Select “Ok”.

The next screen briefly displays the remaining number of phone numbers an d private IDs that you can store.

3. Enter the name that you wish to sto r e.

Select “Store”.

See Figure 1 . for an example of ent ering a name.

adjb

20=Phone/ Prvt List

Exit Ok

adjb

Available 98 Phone #

3 Prvt IDs

adjb

Enter Name

Example

To store the name “TIM”:

1. Enter “T” by pressing

2. Enter “I” by pressing

3. Enter “M” by pressing

Figure 1. Entering a Name

8 once.

4 three times.

6 once.

2. Enter the phone number that you want to associate with this name and select “Store”.

To skip the Phone Number entry, select “Skip”. You will go directl y to the “Enter Prvt ID Number” screen.

The next screen displays the name that you entered and a flashing speed-dial number where the entry will be sto r ed.

3. Do one of t he f ollowing:

• To accept the speed-dial number shown, select “Store”.

• To change the speed-dial number, enter

the desired speed-dial number. The speeddial number stops flashing.

Exit Store

adjb

Enter Phone Number

Skip Store

adjb

TIM Spd#=3

Cancl Store

4. At the next screen, en t er the Pri vate ID number associated with the name that you entered then select “Store”.

To skip the Private ID number entry, select “Skip”.

adjb

Enter PrvtID

Skip Store

Page 32

Pause Digit Entry

When storing a number, you can program your phone so that it will not only dial a number but also pause an d enter another series of numbers such as a personal identificat ion number (PIN ) or password. This feature is particularly useful for automated servi ces such as voice mail and ba nking systems.

Here’s how it works: Let’s say you have a company voice mail account that you frequently check while on travel. And, to access that account currently you must do the following:

• Dial your work numbe r;

• Press * while the voice mail greeting is being played; and

• Ente r you r PIN t o access your messages.

You can progr a m your r750plus phone to enter all of the above informati on for you. All you have to do is separate each entry with a pause. If you were to program your phone to input the above information, the stored data would look like this: 17035551234P1234. In this example, the first eleven digits represent the number that must be dialed to access your voice mail. The P represents a 3 second pause . T he last four digits represent your PIN.

You can use th is feature not only to enter PINs and passwords but also to have the phone automatically select menu options (i.e., press 1 to hear messages).

To create a three-second pause follow the steps below:

Press and hold * for two seconds. The pause symbol (P) will

•

appear.

NOTE: You ca n enter up to 20 numbers/char acte rs in a single entry, stored or

dialed. If you use a system that will not let you enter an option until the automated message has played in its entirety, you can program your phone to pause for more than 3 seconds. For example, performing the above step twice will program two pauses and cause your phone to wait 6 seconds before entering the next set of numbers.

Editing and Erasing Pho ne List Entries

1. Press *, #, 2, 1.

2. Select “Ok”. The “Edit Entry?” sc re e n dis p la ys .

3. Do one of the following: a. To edit an entry, select “Ok”.

(1) At the “Edit Entry” screen, press

then select “OK.

r until the desired entry appears,

(2) At the “Edit Number” screen, edit the phone number, if you wish,

then select “Store”.

(3) At the “Edit Name” screen, edit the name, if you wish, then select

“Store”.

(4) At the “Edit Spd#” screen, edit the speed number, if you wish, then

www.mot.com/iDEN

Page 33

select “Store”.

b. To erase an entry:

Creating, Editing, and Using Stored Lists

(1) At the “Edit Entry” screen, press

l or r.

(2) At the “Erase Entry” screen, select “Ok”. (3) Scrol l to the desired entry, then select “Ok”. At the “E r ase Entry?”

screen, select “Yes”.

4. Select “Exit” to close the Phone List Edi t screen.

Editing and Erasing Private ID List Entries

1. Press *, #, 2, 2.

2. Select “Ok”. The “Edit Entry?” screen displays.

3. Do one of the following: a. To edit an entry, select “Ok”.

(1) At the “Edit Entry” screen, press r until the desired entry appears,

then select “OK.

(2) At the “Edit ID” screen, edit the numbe r, if you wish, then select

“Store”.

(3) At the “Edit Name” screen, edit the name, if you wish, then select

“Store”.

b. To erase an entry at the “Edit Entry” screen, press

select “Ok”. Press

r to scroll to the desired entry, then select “Ok”.

At the “Erase Entry?” screen, select “Yes”.

4. Select “Exit” to close the Private ID List Edit screen.

l or r once, then

Page 34

Last 10 Calls Received and Sent Lists

If you subscribe to your carrier’s Caller ID service, you can view, dial, and store the list of the last ten phone numbers received and the last ten pho ne numbers dialed.

The most recent call sent or received appears first in your call list. From the Phone Ready screen:

1. Press

2. Select “Calls”. The Rcvd Calls screen opens.

3. Do one of the following:

4. To view the Calls Received list again, select “Rcvd”.

5. To close the Calls list, select “Cancl”.

Quickstore of Phone Numbers

n. The menu options change to “Calls” and

“Spd#”.

If the “Store” option appea rs , the number currently di splayed is not in your Phone list. To add the number to your list, select “Store”.

If you want to see the Sent list but the “Store” option is on your disp lay, press

n until you see the “Sent” menu

option.

• To view the Calls Received list, use the Scroll key to view each entry.

If the “Store” option is on your display, press n until you see the “Rcvd” menu option.

• Or, to view the Calls Sent list, select “Sent”. Use the Scroll key to view each entry.

adjb

Phone Ready Line1

12:55p 10/18

Calls Spd#

adjb

Rcvd Calls 1=5554444

12:55p 10/18

Cancl Store

adjb

Rcvd Calls 2=MAILBOX

12:56 10/18

Cancl Sent

adjb

Sent Calls 1=JOHN

12:56p 10/18

Cancl Rcvd

If you subscribe to your carrier’s Ca ller ID service, you can use Quickstore to store the last number that you dialed or quickly store a number from the Last 10 Calls Received and Sent Lists without having to enter the programming menu.

NOTE: As you scroll through the Last 10 Calls Received or Sent List, only the

name displays. If the name is not available, the phone number displays.

To use Phone Number Quic kstore, from either the Phone Ready screen or f rom the Last 10 Calls Received or Sent List:

1. Do one of the following:

• To go to the last call that you dialed, press r.

• To view the Received and Sent Calls list, press n until you see “Calls”, then select it.

adjb

Phone Ready Line1

12:43p 07/22

Name Mail

www.mot.com/iDEN

Page 35

Creating, Editing, and Using Stored Lists

2. Select “Store”. The Enter Name screen displays.

3. Enter the name then select “Store”. The combined name and number entry is stored in the first

available storage space.

The Stored message displays with the name that you stored.

adjb

Phone Ready 0=5554455

Cancl Store

adjb

Enter Name

Cancl Store

adjb

JOHN 5551212

Stored

Page 36

Making Private Calls

A Private call is a on e-t o-one conversation between two people. In Private mode, each phone is identified by a name or a number called a Private ID.

To make a Private Call:

1. Press

2. Use the ke ypad to enter the Private ID of the person

3. To speak, pr ess and hold the PTT button, wait for the

4. To listen, release the PTT button. To use Scroll or Name Search, you must have a Privat e ID list.

Scroll

m until you see “Prvt Ready” on your display.

that you want to r each.

chirp, then speak into the microphone.

adjb

Prvt Ready JOHN SMITH

12:43p 07/22

Alert Name

1. Press m until you see “Prvt Ready” on your display.

2. Press

l or r to scroll through the stored Private ID list.

3. Press and hold the PTT button, wait for the chirp, then speak into the microphone.

Name Sea rch

1. Press m until you see “Prvt Ready” on your display.

2. Select “Name”.

3. Press the key with the first letter of the name you are searching for.

4. Press

l or r to scroll through other stored names associated with the let-

ter you entered.

5. Press and hold the PTT button, wait for the chirp, then speak into the microphone.

Receivin g a Priv ate Cal l

When you receive an incoming Private call, you hear a brief chirp-like tone. Your r750plus phon e automatically switches to Private mode, and the Private ID or the name of the caller displays.

1. Your phone must be idle, that is, not busy in an active call or on the browser.

2. Wait for the caller to fi nish speaking.

3. Press and hold the PTT button. Begin speaking after you hear the chirp.

Private/Group Mode Speaker

You can hear Private calls through eithe r th e earpiece or the speaker. Press the Speaker button Speaker on or off.

k on your r750plus phone to turn the Private/Group Mode

www.mot.com/iDEN

Page 37

Making Private Calls

• With the Speaker on, yo u will hear incoming call s th rough the speaker.

• With the Speaker off, you will hear incoming calls through the earpiece.

Call Alert

Call Alert enable s yo u to pa ge an individual by sending an au d ible tone. A Call Alert allows the individual to respond when it is convenient. The alert plays intermittently until the individual clears it.

Selecting a Call Ale rt Tone Style

Your phone has ten selectable Call Alert tones.

Setting an Alert Tone Style

1. Press *, #, 3, 7.

1. The displ ay shows your current Alert tone.

2. Select “Ok”.

3. Press l or r to scroll through the available Alert tone styles.

4. To listen to the selected Alert tone, press the Volume buttons on t he side of the phone.

5. Select “Ok” to select the Alert tone shown.

adjb

37=Set Alert Style:1

Exit Ok

adjb

Alert Style 4

Cancl Ok

To leave the Alert ton e style unchanged, sele ct “Cancl”

6. Select “Exit”.

Sending a Call Alert

1. Press m to go to the “Prvt Ready” screen.

2. Select “Alert”.

3. Enter t h e Privat e I D , or pres s

l or r to scroll to the

desired name. You may also select the name by press-

n and using Name Search.

ing

4. Press the PTT button.

Receiving a Call Alert

When you receive a Call Alert, y ou will h ear an a lert ton e and see a message o n your display.

• To answer the Call Alert, press the PTT button.

• To clear the Call Alert without answering it, select “Clear”.

adjb

Prvt Ready JOHN

12:43p 07/22

Alert Name

adjb

Alert 0 JOHN

Exit Queue

Page 38

• To silence the Call Alert without clearing it, press any key other than the PTT button.

NOTE: Until the C a l l A le rt is cleared or return ed , th e alert plays inte rmit-

tently and you will not be able to receive any additional Phone, Private, Group, or Net calls.

Call Alert Queuing

If your carrier provides Call Alert Queuing, you can save up to eight Call Alerts in a queue for later use.

After you respond to the Call Alert, it is removed from the queue.

Clearing or Queueing a Call Alert

When you receive a Call Alert, do one of the following:

• To clear a Call Alert, select “Clear”.

• To place the Call Alert into the queue, select “Queue”.

Pressing

m also queues the Call Alert.

adjb

Alert 3 JOHN SMITH

If you receive multiple Call Alert s, the last received Call

Clear Queue

Alert displays and the remaining Call Alerts are stacked at the beginn ing of the queue.

Responding to a Queued Call Alert

You can resp ond to the Call Alerts in any order. To select a C a ll Alert for response:

1. Select “Queue”.

2. Press

3. Press the PTT button to respond to the Call Alert.

l or r to scroll to the desired Call Alert.

www.mot.com/iDEN

Page 39

Making Private Calls

Quickstore o f Pri va te I D s

Quickstore allows you to quickly store a received or sent Private ID, without having to enter the programming menu.

From the Private Ready screen, with the Private ID displayed:

1. Select “Store”.

If an ID is gr ea ter than 12 characters in length, th e ID wraps to the third line.

2. Enter the name associated with the Private ID.

3. Select “Store”. The Stored message displays.

If the list is full with the maximum 100 entries, you will get the messa ge, “Prvt List Full”. You cannot add names until you remove so me names from the list.

adjb

Prvt Ready 56781

12:43p 07/22

Alert Store

adjb

Enter Name

Cancl Store

adjb

JOHN Stored

4. Next, the display returns to the Private Ready mode.

adjb

Storing Your Private ID

NOTE: For non-Crossfleet enabled networks only.

Prvt Ready JOHN

12:43p 07/22

Alert Name

To store your Pr ivate ID in your r750plus phone:

1. Press

*,#,2. The screen displays the message, “2=Own Pvt ID”.

2. Select “Ok”.

3. Enter the Private ID provided by your carrier.

4. Select “Store”.

To view your Private ID at any time after you store it:

1. Press *,#,2. The screen displays the message, “2=Own Pvt ID”. The next line disp lays your Privat e ID. This is the number supplied by your

carrier that yo u store in your phone.

2. Select “Exit”.

Page 40

Making Group Calls

A Group Call allows you to communicate instantly with members of a selected Talkgroup–a pre-defined set of people who share a communication need.

Talkgroups appear on your display as numbers or programmed names, such as Talkgrp10 or Sales Team.

To make a Group C all:

1. Press

2. To place a ca ll, do one of the following:

m until “Group R ea d y” displays. Your most

recently use d ta lkg r ou p displays, for ex a m ple ,

“Talkgrp 10”.

• To speak to this talkgroup, press and hold the

P TT butto n. Wait for the chirp, then speak into the microphone.

adjb

Group Ready 1:Tg1

S Off Sts

• To speak to another talkgroup, pr ess desired talkgroup name. Press and hold the PTT button. Wait for the chirp, then speak in to the microphone.

3. To listen, release the PTT button.

l or r until you see the

Receivin g a Group Ca ll

When you receive an in c omi n g Group ca ll, yo u will hear a brief chirp-like tone. Your r750plus phone autom atic ally s wit che s to Grou p mo de, and the T alkg rou p name displays.

1. Your phone must be idle, that is, not busy in an active call or on the browser.

2. Wait for the caller to finish speaking, then press and hold the PTT button. Begin speaking after you hear the chirp.

3. To listen, release the PTT button.

You can receive group calls only in the Talkgroups that you are provisioned for.

For more information, see “Adding or Storing a Tal kgroup” on Page 32.

Adding and Storing a Talkgroup

To add and stor e a tal kgroup name to your r750plus phone:

1. Press

2. Select “Ok”.

3. At “Add New Entry?”, select “Ok”.

4. At “Enter ID”, enter the desired tal kgroup number and select “Store”.

5. At “Enter Name”, enter a name for the talkgroup and select “Store”.

*,#,2,3.

www.mot.com/iDEN

Page 41

Making Group Calls

Area Selectio n

In Group mode, you can call only those tal kgroup members in a specific location. This is useful when you know where the individuals are located within the service area.

1. Press

2. Press

3. Press

m until you see “Group Ready” on your display. n, then select “Area”. l or r to scroll through the targeted areas specified by your local

carrier.

4. Select “Ok” to select the targete d area.

Private/Group Mode Speaker

You can hear Group calls through either the earpiece or th e speaker. Press the Speaker button

k on the r750plus phone to turn the Private/Group

Mode Speaker on or off. With the Speaker on, yo u will hear incoming calls through the speaker. This is

useful to monitor talk group activity in Group mod e . With the Speaker off, you will hear incoming calls through the earpiece.

Page 42

Advanced Features

Some r750plus phones are provided with an advanced feature set as described in this section. Please contact your service provider for more information.

Multi-Si m ul ta ne ous Talk Group Scan

Multi-Simultaneous Talkgroup Scan (Scan) allows users within a fleet to monitor more than one talkgroup. A Talkgroup Mode, within the range of 1255, is comprised of up to four talkgroups (one Primary Talkgroup and up to three Secondary Talkgroups). Calls can only be initiated on the user’s Primary Talkgroup; however, a user can respon d to an activ e call on eithe r a Primary or Secondary Tal kgroup. Both Primary and Secondary Talkgroups, as well as the Talkgroup Mode, can be named (aliased). The Scan feature is set to “ON”, but the user has the capabi lity of disablin g Scan throug h an option key. The un it will store the last Scan setting, and power on with that setting.

Entering Group Mode

1. Press the f key to power on your unit. Pr ess m to enter Group Mode.

Two different Talkgroup Modes are displayed below. The Primary Talkgroup is indicated to the right of the Talkgroup Mode. The disp lay on the left shows a non-aliased Primary Talkgroup, and the display on the right shows an aliased Primary Talkgroup.

Group Ready

102:Tg 15

S Off Sts

Primary Talkgroup

Not Aliased

Group Ready

3:Electricia

S Off Sts

Primary Talkgroup

Aliased

www.mot.com/iDEN

Page 43

Advanced Features

Initiating a Group Call

1. Press and hold the PTT button to initiate a group call on your Primary Talkgroup.

The example to the right illustrates the display if Fred pressed the PTT button to initiate a call on the Electricians talkgroup. This is Fred’s Pr i m ary Talkgroup for Mode 3.

All subscriber units that have affiliate d with yo ur Primary Talkgroup as either a Primary or Secondary Talkgroup in any Talkgroup Mode will receive your group call if they are not already engaged in an active call.

The following screens will be displayed on the receiver subscriber units indicating they have joined the call. The second line of the display will indicate the Mode number followed by Primary or Secondary Talkgroup, which may be aliased. The third line of the display indicates the PTT-ID of the unit initiating the group call, which can also be ali ased.

Group Ready 3:Electricia

S Off Sts

Fred’s Display

Example: Jaso n joins the Electricia ns tal kg r ou p. He has also selected Electrici ans as his Primary Talkgroup for Talkgroup 3, but he has no alias for his talkgroup, so the Talkgroup nu mber (T G ID) is disp layed. Fr ed’s PTT-ID is displayed on the third line.

Group Ready 3:Tg 3 ID:Fred

S Off Sts

Jason’s Display

Example: Julie joins the call and the unit updates the alias to indicate active Secondary Talkgroup (Mode 1, Secondar y Talk gro up 3 ). Fr ed’s PTT -I D is di sp layed on the third line.

Responding to a Secondary Talkgroup

Group Ready 1:Electricia ID:Fred

S Off Sts

Julie’s Display

1. To respond to a call on a Secondary Talkgroup, press the PTT button.

Example: Julie responds to Fred by pressing the P TT button.

Group Ready 1:Electricia

S Off Sts

Julie’s Display

Page 44

Fred has released his PTT button, then begins to receive Julie’s response.

Jason receives Julies’s response. After the Secondary Talkgroup call is completed, all

receiving subscriber units’ displays will revert to their Primary Talkgroup of the selected Talkgroup Mode.

Group Ready 3:Electricia ID:Julie

S Off Sts

Fred’s Display

Group Ready 3:Tg 3 ID:Julie

S Off Sts

Turning Scan On and Off

Jason’s Display

The capability to turn scan on and off is available as an option key.

1. Press the “Scan” option key. Press the “S Off” soft option key to disable scan.

Group Ready

18:Engineers

102:Tg 15

S Off Sts

Scan Enabled Scan Disabled

Group Ready

18-Engineers

3:Electricia

Scan Sts

S Off Sts

When Scan is disabled, you will not have access to your Secondary Talkgroups

Aliasing Talkgroup Mode

The r750plus phone allows you to Alias Talkgroup Modes and Primary and Secondary Talkgroups.

1. Press *, #, 2, 5.

2. Select “Ok”.

3. At “Add New Entry” select “Ok”.

NOTE: Press l or r to Edit or Erase a Talkgroup Mode Alias.

4. Enter the ID of the desired talkgroup mode and press “Store”.

NOTE:The Aliased Modes are displayed only while scrolling through the T alk-

group Mode or during Direct Entry. In an idle or transmission state, the Mode ID number is displayed. This ensures that the Mode ID number and Primary Talkgroup are displayed simultaneously on screen.

5. Then enter the name of the d e sired talkgroup mode alias and press “Store”.

www.mot.com/iDEN

Page 45

Advanced Features

Talkgroup Mode Selection by Direct Entry

You may select a different Talkgroup Mode at any time.

1. Press the hold

1 key. To erase a digit, press l. To clear all digits, press and

l. To return to your previou s ly selected Talkgroup Mode, press the

“Cancl” option key.

2. Press the

3. Press the PTT button or the “Ok” option key. “Mode 18” will flash until affiliation is complete. If you select ed the Talkgro up Mode by pressing the PTT button, you will initiate a call on yo ur Primary

8 key.

Group Ready 18_

Cancl Ok

Talkgroup.

Talkgroup Mode Selection by Memory Scroll

The Memory Scroll feature allows you to use the l or r keys to scr oll thro ugh memory for Talkg roup Modes.

1. Press

2. Press the PTT button or the “Ok” option key.

r. Press and hold this key to Auto Scroll

through your lists more quickly.

NOTE:To transmit, press the PTT button; to listen

only, pr e ss “Ok”.

Group Ready Mode 18

Cancl Ok

Emergency Group Call

NOTE:If your r750plus phone has an orange button on top of the housing, the

Emergenc y C all feature is present.

Emergency Group Call is a carrier-dependent feature. Please contact your carrier for service availability.

Placing an Emergency Group Call

An Emergency Group Call allows a user to have priority access to his talkgroup members and provide them visual and audible indications of an eme rg ency condition. The Emergency call can be placed from any mode (private, group, phone, Net).

1. Press and hold th e Emer gency Button. T he portable will emit a n emer gency start tone to indicate that you have successfully requested an emergency call.

2. Press the PTT button to ta lk. The currentl y selected Talkgroup Mode will be selected unless your organization pre-programmed an emergency Talkgroup Mode. If th is is the case, t he pre-programmed Emergency Talkgroup Mode will flash in the dis-

EMERGENCY 1: SE Plant ID:John

Page 46

play. The Talkgroup Mode appears in the second line of the display as shown.

3. To end an emergency call, press and hold the Emergency Button for 3 seconds. The portable will return to the last selected talkgroup mode. The initiator cannot exit th e emergency call without fi rst cancellin g the emergen cy call.

Canceling an Emergency Group Call

Press the Emergency Button until the unit generates an Emergency Call Cancel tone. This tone in dicates the cancellation has occurred . The display will retur n to the non-emergency state.

An emergency call will be cancelled if no talkgroup activity occurs for 30 seconds. The dispatcher, or any other person provisioned to can cel an emergency call can also cancel the emergency call.

Receiving an Emergency Group Call

When an emergency call is initiated, other members of the talkgroup will be notified of an emergency condition.

The receiving unit will hear an Emergency Receive Tone, and the receiv er ’s display will change to indicate the condition.

The first line of the display will indicate the ID or alias of the person initiating the emergency call. The second line will show you the Talkgroup Mode and Active Talkgroup name or number. The third line shows you the ID or alias of the person who is currently speaking. The third line will remain blank when the receiving unit initiates a transmission.

EMER:58 1:SE Plant ID:Cheryl

S Off Sts

Receiver Operations During an Emergency Call

Other members of the Emergency Group Call can leave the emergency call and change modes (phone, group, private, Net) while involved in the call.

While listening to the emergency call, the receiving unit will not receive phone calls, Call Alerts, Message Mails, Sta tu s Me ssages, Priv at e Call s or o the r g rou p calls for the duration of the emergency call.

Status Message

Status Message lets you send a pre-d efined message to the dispatcher or to another user’s ID. Up to ten pre -defined alph a numeric Status Me s sa g es are available such as “At Lunch ” or “En Route”.

www.mot.com/iDEN

Page 47

Advanced Features

You can also send any numeric Status Message from 1-255. A Stat us Message can be sent by selecting both the Status Message and target ID (alias) of the person who is to receive the Status Message. You can reduce talk time by sending Status Messages. You can also leave a Status Message for receivers while they are away from their port abl es.

Entering the Status Message Function

1. Press the Status Option Key to get to the Status Message function. You must be in Group or Private Mode to access this function.

The second line of the display shows the Status Mes-

sage (alpha or numeric) of the last successfully sent status.

2. Press Option “Exit” to return to either the group or Private mode. Pres s Opt ion “Targt” to go to the Target ID selection screen.

Sts Message En Route

Exit Targt

Selecting a Status Message with Direct Entry

Direct Entry allows you to use the keypad to select the message you want to send. Enter any number from 1-255 to select a Status Message. The number can correspon d to one of ten pre-pr og ram m e d alp ha numeric status messages or any other numeric Status Mess age wi thin the range of 1-255.

1. Press 2.

2. Press “Ok”. Pressing the PTT button at this time will send the message to the last unit to which you sent a successful message.

3. Press “Targt” to select a target for this message.

Sts Message 2= At Lunch

Cancl Ok

Page 48

Selecting a Status Message Using Memory Scroll

You can selec t S tatus Messages by using the l or r keys to scr oll through the ten named (al iased) Statu s Messages which you have progr ammed.

1. Press

2. Press “Ok”.

3. Press “Targt” to select a target for this message.

Selecting a Target by Direct Entry

1. Enter the numeric ID of the person to whom you

2. Press “Ok”.

3. Press the PTT button to send the message to the

r until you find the message you want. In

this case we scrolled to the Status Message “At Lunch”.

are sending the message.

selected ID.

Sts Message At Lunch

Cancl Ok

Sts Target 5= Rochelle

Cancl Ok

Selecting a Target by Memory Scroll

You can selec t a t arget by scrolling though the portable IDs or aliases by using

l or r keys.

the

1. Press the you want to send the message.

2. Press “Ok”.

3. Press the PTT button. The dis p la y sh ows the mes sage that has been sent.

r key until you find the person to whom

Sts Target Julie

Cancl Ok

Selecting a Target by Alpha Search

You can select a portable ID by selecting the first letter of the name (alias). If no name is stored under a letter, the unit will automatically search forward, alphabetically, until the next name is found.

1. Press the “Name” key.

2. Press a numeric key. i.e.: Pres s

7 three times to

view the names (aliases) that begin with the letter R.

3. Use either the

l or r keys to scroll to the name

(alias) who is to receive the Sta tu s Message.

4. Press the PTT butto n. The dis p la y sh ow s t he me s sag e tha t ha s been sent.

Name:Sts R=Randy

Cancl Ok

www.mot.com/iDEN

Page 49

Advanced Features

Sending a Status M e ssage

After selecting bot h a Status Message and a desired target ID, press the PTT button to send the message. Two high pitched tones will be heard during transmission.

If successful, two high pitched tones will be heard to indicate the message was successfully delivered to the target portable.

If unsuccessful, an alert tone will be heard to indicate that the targeted unit is busy, out-of-range, or turned-off.

In either case, the portable will return to the status screen after 3 seconds.

Sts-Sent Successful

User Not Available

Exiting the Status Message Function

Press the m key to exit the Status Message screen. Pressi ng the “Exit” option key from the Status Message screen will also allow you to exit t he st atus message function.

Receiving a Status Message

The portable will receive a message along with alert tones. To silence the recurring alert tones only, press any key except

m or the “Clear” option key. In case of

a non-aliased sender ID, the Quickstore option is available.

Sts-Kelly At Lunch

Clear

If a non-aliased ID is sent, the Quickstore softkey is displayed.

All calls remain blocked until this message is cleared.

ID List Programming

Feature menu #26 allows you to program ten status messages, each up to 12 characters long.

26=Sts Mesg List Program

Exit Ok

Page 50

Isolated Site Operation

Isolated Site Operation (ISO) allows group call communications to continue within a single cell site when co nn ec tivi ty to the network is lost b y allo wing th e cell to operate in a local, one cell only mode. ISO is limited to dispatch talkgroup calls only. In all modes the display will update to include “-Isoft” on the first line. Talkgroup communications will be limited to only those units that are connected to the ISO c ell, and on ly on the ta lkgro up or Ta lkgro up Mod e that the subscriber unit last used before the cell entered the ISO state.

Entering ISO

The portable will enter th e ISO stat e when its cell becomes isol ated from the network, assuming the portable has no available neighbor cells. It will display one of the following scree ns: (The LED indic a tor is off in IS O un less the uni t is transmitting. While transmitting, the LED will be green.)

NOTE:If the portable is powered on in an ISO cell, it will enter the ISO state if

there are no available neighbor cel ls .

Phone Mode

Group Call Mode

Private Call Mode

Net Mode

Phone-Isoft

Name Mail

Group-Isoft 3:Electricia

S Off Sts

Prvt-Isoft Julie

Alert Name

Net-Isoft Julie

Alert Name

www.mot.com/iDEN

Page 51

Advanced Features

Initiating a Group Call

If the portable has Scan enabled when the site enters ISO, the portable will be able to initiate a call on its Primary Talkgroup and can respond to calls started on either the Primary or an y Secondary Talkgroup.

The portable will not be able to select a new Talkgroup Mode while in ISO condition.

If the portable has Scan disabled when the site enters

Group-Isoft 3:Electricia

ISO, the portable will be able to initiate and respond to calls on the Primary Talkgroup only.

S Off Sts

Exiting ISO

When the cell returns to normal operation, the unit will revert back to standard operation. The green LED indicator will resume blinki ng.

If the unit goes out of range of the ISO cell and has no available neighbor cells, the unit will go out of service.

Group Ready 3:Electricia

S Off Sts

Other Operations

Since the ISO operation is limited to group calls only, any attempts to communicate in other modes (phone, private, alert, status) will result in a “Service Not Available” message. However, all other functions (memory scroll, direct entry, feature menu programming, etc.) are still operable.

Page 52

Using Mail Services

NOTE:Some features may be network dependent or subscription only, and

may not be available in all areas. Contact your service provider for more information.

Your r750plus phone provides the following mail services:

• Net Mail

• Voice Mail

• Message Mail

When you recei ve a new message, the appears and flashes.

• To read your new mail immediately, select “Now”.

• To read your new mail later, select “Later”.

An asterisk * next to a mail service indicates new mail.

c icon

a d c b

New Mail Read?

Later Now

To use message services, select “Mail” from any Rea dy screen. The inbox screen opens with your message services listed.

To select a message service, scroll to highlight the service or press the corresponding number. For example, to access

a d c b

1>Voice Mail

*2>Mesg Mail

3>Net Mail

Exit Ok

your Message Ma il, pre ss 2.

Net Mail

Net Mail alerts you when you receiv e al ert s from t he Browser, for example, notification of an e-mail or fax.

From any mode :

1. Select “Mail”.

2. Select “Net Mail”, then select “Ok”.

The Alerts inbox opens and displays the type of Net Mail alerts.

adjb

1>Voice Mail 2>Mesg Mail

3>Net Mail Exit Ok

The Inbox screen opens.

3. Scroll to the type of alert that you wish to view, then select “Ok”.

adjb

Inbox

1 Email

2 Fax

Ok Del

www.mot.com/iDEN

Page 53

4. To read the message, select “View”.

Using Mail Services

adjb

Inbox:1unread

1*Lunch

2 MEETING

View Menu

5. After you read the message, do one of the following:

adjb

LUNCH

----

With client at 12:00

Next Menu

• Select “Menu” to view a list of action s that y ou can take for this messag e, such as rep ly , delete, save, and so forth.

• Or, select “Next” to read the next message.

adjb

1>Reply

2>Delete

3>Save

4>GoTo Message

Ok More

Voice Mail

When your r750plus phone receives a Voice Mail message:

• The

• The Voice Mail alert tone sounds (if Mail Notification is turned on).

• The mes s age, “New Voice Mail Waiting” appears on your display.

• An exclamation point (!) on the display indicates that you have at least one

From any mode:

1. Select “Mail”.

2. Select “Voice Mail”.

The Voice Mail inbo x opens and displays the number of your new and tot al Voice Mail messages.

To retrieve your voice mail immediately:

1. Select “Dial”. This action automatically places a call

2. To close your vo ic e ma ilbox, select “Exit”.

g icon appear s on your displa y.

urgent message.

to your voic e mailbox. The most recent message is retrieved first.

a gjb

1>Voice Mail

2>Mesg Mail

3>Net Mail

Exit Ok

a gjb

Voice Mail 1 New

1 Total

Exit Dial

Alert Receipt During Phone Call

Through your programming menu (*,#, 15) you can delay Voice Mail and Message Mail Alerts so that you are not interrupted by the alert tone while on a call. You can choose the following:

Receive All Alerts

•

• Delay All Alerts

Page 54

• Receive Message Mail Alerts only See “Setting Programming Me nus” on page 49 for more information.

Message Mail

Message Mail can b e either a numeric page or a text message of up to 140 characters. Your phone can receive and store 16 mail messages at any time.

1. To postpone re ad in g yo ur ma il a nd to clear the display, select “Later”. The icon stops flashing but remains on your display to remind you that you have unread messages.

To read your mail now:

2. Select “Now”. The screen will bri efly di splay the number of new and saved messages in your mailbox.

3. A list of all your messages will display. Highlight the message that you wish to read and select “Read”.

To read you mail later:

4. From any mode , select “Mail”. The Mailbox opens.

adjb

1>Voice Mail

2>Mesg Mail

3>Net Mail

Exit Ok

5. Select “Mesg Mail”.

adjb

Message Mail

Your mess a ge m ai l bo x o pe n s an d briefly disp la ys th e number of new and saved messages currently in your mailbox.

2 New 0 Saved

Next, a list of all messages will displa y. Select the message that you wish to read and select “Read”.

Saving and Erasing Mail

Your message shows the time and date that the sender entered it in the network After you read a text or numeric message, you can either

Save or Erase the message. Press option.

o under the desired

www.mot.com/iDEN

adjb

*>FR: Smith

*2>FR: Jones

Exit Read

adjb

1>Call 5551212 11:15a 04/02

Erase Save

Page 55

Using Mail Services

Auto Call Back

You can respond to numeric pages and text messages containing a call-back number. To automati cally dial a number contain ed within a Messa ge Ma il, pres s e.

Mail Memory Full

If all 16 message registers are full, your phone displays the message “Mail Waiting, Memory Full”. You cannot receive new Message Mail until you empty register space by erasing sav ed or unread messages.

Page 56

Using Your Phone as a Modem

NOTE:Some features may be network dependent or subscription only, and

may not be available in all areas. Contact your service provider for more information.

You can use you r r750plus phone as a modem for dat a transfer from your laptop, handheld device, or desktop computer. This is particul arly useful whe n there is no wired phone line (wall jack) available.

You simply attach a data cable (available separ a tely) to your phone and your computer. From that point, your phone is your modem. This allows you to send or receive time-critic al information such as e-mail, a field servi ce report, or files. In addit ion, you can also send or receive faxes.

This type of wireless connection uses one of two types of data connection: circuit-switched data and packet data.

• Circuit-switched data is typically used for sending and receiving faxes and for transferring large files.

• Packet data is used for small file transfers such as e-mail.

To use these services, you must install the iDEN Wireless Data Services software (available separately). For more information on setting up your computer and your r750plus phone for Packet and Circuit Data calls, see the Wireless Data Services User’s Guide and contact your carrier.

TTY Users

You can use your phone and computer in TTY mode. Your computer screen and keyboard re place the standard TTY devi ce. For more information, please see the Wireless Data Services User’s Guide.

www.mot.com/iDEN

Page 57

Setting Programming Menus

You can customize the settings on your phone using the Programming Menu.

1. Press

2. Select “Prgm”.

3. Select “Ok”.

4. Press

Keypad

Number

n until you see “Prgm” on the display.

l or r to scroll to the desired Programming Menu Option or enter

the number of the Option.

NOTE: You c an press *, #, and then t h e correspondin g keypad number

to get to the desired programming menu.

Table 6: Programming Menu Options

Menu Option Function

1 Own Ph # Automatically store the telephone

number of your phone afte r you receive the first incoming call (Line1). You can also enter the number and v iew it.

2 Own Pvt ID Display the private number of

your phone.

3 Mail Display Turn on and off the New Mail

message that is displayed with incoming Voice, Message, or Net Mail.

4 Manual Lock:Off Lock your phone to prevent

unauthorized use. You must enter a pass code to unlock it.

5 Auto Lock:Off Automatically lock your phone

each time it is powered on to prevent unau thorized use.

6 Auto Answer:Off Turn on or off automatic

answering of incoming phone calls after 1-4 rings.

Page 58

Table 6: Programming Menu Options (Continued)

Keypad

Number

9 Vibrate Alert:Off Receive a non-audible al ert for

10 Last Call Timer Display the duration of the most

11 Display Timer:Off Turn on or off automatic disp lay

12 Reset Timer Display cumulative airtime of all

Menu Option Function

incoming p hone and circuit data calls and messages. See “VibraCall® Alert” on page 15.

recent phone call.

of the Last Call Timer at the end of each phone call.

phone calls since last reset.

13 Total Timer Display cumulat iv e airtime of all

phone calls.

14 1 Minute Beep:Off Automatically signal each minute

of elapsed phon e airtime with an audible beep.

15 Alert Receipt Delay Voice Mail and Message

Mail Alerts so that users are not interrupted by the a ler t t on e while on a call. Users can choose to: Delay All Alerts; Receive All Alerts; Receive Message Mail Alerts only. See “Alert Receipt During Phone Call” on page 45.

16 Backlight Timer Specify the duration of the

Backlight Timer (0, 10, 20 , or 30 seconds).

20 Phone/Prvt List Add phone and private numbers in

one proced ur e . See “Combined

Phone Number and Private ID List” on page 22.

www.mot.com/iDEN

Page 59

Setting Programming Menus

Table 6: Programming Menu Options (Continued)

Keypad

Number

21 Phone List Edit Edit and erase up to 100

22 Prvt ID List Edit Edit and e rase up to 100 Priv at e

Menu Option Function

frequently called phone numbers and associated names. See

“Editin g and Erasing Ph one List Entries” on page 24.

number s an d as s ociated n am e s . See “Editing and Erasing Private ID List Entries” on page 25.

23 Talkgr p List

Program

24 Area List Program Add/Edit/Erase numbers and

25 Talk group Mode

List Program

26 Status Message

List Programming

30 Ringer Volume Set the ringer volume using the

Add/Edit/Erase numbers and associated names for up to 100 pre-programmed talkgroups. See

“Adding and Storing a Talkgroup” on page 32

associated names for up to 50 targeted areas.

Add/Edit/Erase numbers and associated names for up to 30 preprogrammed talkgroup modes.

Add/Edit/Erase numbers and associated names for up to 10 alphanumeric Status Messages.

volume contro l keys, or lower th e volume to silence the ringer. See

“Setting the Ringer Volume” on page 16.

31 Set Ring Style Select a distinct ring style for

incoming phone calls. See

“Setting a Ring Style for the Alternate Line” on page 16.

Page 60

Table 6: Programming Menu Options (Continued)

Keypad

Number

32 Mail Volume Set the volume of incoming

33 Earpiece Volume Set the defaul t earpiece volume

34 Keypad Volume Set the volume of the keypad

Menu Option Function

Message Mail, Voice Mail, and Net alert tones using the volume control keys, or lower the volume to silence the mail alert tones.

using the volume control keys.

tones using the volume cont ro l keys, or to silence the ke y pa d tones.

35 Speaker Volume Temporarily adjust the Group/

Privat e Speaker vol ume for nois y environments.

36 Spkr Vol Set Tone Turn the speaker vo lume set tone s

on or off.

37 Set Alert Style Select a distinct Call Alert tone.

See “Selecting a Call Alert Tone Style” on page 29.

38 Silent Group Silence all incoming Group call

alerts an d vo i c e a ct ivity. When set, your screen displays the message, Group-Silent.

40 Change Passcode Change your secret four-digit pass

code from the initial setting 0000.

60 Set Baud Rate Set the modem baud rate between

the phone and th e PC . See the

Wireless Data Services User’s Guide.

61 Data Ring Volume Set the default d ata ring e r v olum e

using the volume control buttons . See the Wireless Data Services User’s Guide.

www.mot.com/iDEN

Page 61

Setting Programming Menus

Table 6: Programming Menu Options (Continued)

Keypad

Number

62 Pgm Dat a # View your circuit data (fax)

63 IP Address Use the scroll keys to view the

Menu Option Function

number. See the Wireless Data Services User’s Guide.

Internet Protocol (IP) Address -1 for your browser, as programmed in your phone. If your phone is cabled to a computer, view IP Address-2, the stored IP address of your computer. See the Wireless Data Services User’s Guide.

64 Reset KBytes Tx/

View the number of Kilobytes sent and received for packet dat a. See the Wireless Data Services User’s Guide.

65 Lines per Screen

(Browser and Mail menu)

View the display in 4 lines, 12 characters or 6 lines, 16 characters.

70 Language Select one of four languages for

your display text. The default is

English. See “Changing the Display Language” on page 11.

71 Time/Date Select the format for the time and

date display. See “Setting the Time and Date” on page 9.

NOTE: Important! Do not perform the fol low ing shaded me nu opti ons unless

you are instructed to do so by your carrier. You could damage your phone.

Page 62

Table 7: Other Programming Menu Options

Option

Number

41 Feature Reset Returns all feature settings to

42 Master Clear Performs Feature Reset and

43 Master Reset Resets the phone’s identification

44 Change Service

50 NAM Selects alternate Numeric

51 Netw o r k I D Edits the pre-programmed

Menu Option Function

their original defaults.

erases all stored lists.

number.

Changes or resets the fraud

Key

prevention service key.

Assignment Module (NAM). See local carrier for information.

Network number list and se lect s roaming options.

About Error Codes

You may receive operational status messages under certain conditions. Before contacting your carrier, note the message, numeric code, and the conditions under which it appeared. Table 8 lists and describes the operational status messages.

Table 8: Error Codes

Status Messages Message Description

Number Not in Service The number that you entered is not

valid.

User Not Available The party that you called is either

busy, out-of - ran ge, or turned off. Please try again later.

www.mot.com/iDEN

Page 63

Setting Programming Menus

Table 8: Error Codes (Continued)

Status Messages Message Description

User Not Authorized The party th at you called has not

purchased this service.

Please Try Later This service is temporarily not

available. Please t ry again later.

User Busy in Private The party that you called is busy

in a Private call.

Service Restricted This service was restricted by your

carrier or it was not purchased.

Service Not Available This feature is not available on the

current network.

System Busy Try Later The system is experiencing heavy

traffic. Please try again later.

Service Confl ict This service cannot be enabled

because an incompatible service has already been turned on.

Please Try Again An error occurred. Note the error

code and try again.

User Busy in Data The party that you called is busy

in a data call.

Self Check Error A fault was detected with your

phone. If this error recurs, note the error code and contact your carrier.

Self Check Fail An operational fault was detected

with your phone. Note the numeric code, turn your phone off, and contact your carrier immediately.

Page 64

Optional Accessories

Batteries

NOTE: For best results, charge the batteries within the temperature range of

° C to 40° C (50° F to 104° F).

NOTE: Prolonged charging is not recommended. See Table 9 for battery charg-

ing guidelines.

Charging the Battery

To get the maximum use from the battery, charge it overnight before you use it for the first time. See Table 9 for batt e ry charging times.

Table 9: Battery Charging Times

Motorola Battery Charging

Time to 90%:

Kit Number Description

Chemistry

NTN9037 NiMH 100 minutes NTN9038 Intrinsically

NiMH

Safe

Rapid

Charger

100 minutes

* For users who work in hazardous environments, Intrinsically Safe Battery, NTN9038, is offered. Please contact your carrier for availability and the specific environments approved for this battery.

Battery Operating Instructions

• Extreme temperatures will degra de b at te ry p erf orm anc e . Do n ot store yo ur battery where temperatures exceed 60°C (140°F) or fall below -20°C (4°F).

• The battery capacity will be degraded if stored for long perio ds whil e fully charged. If long term storage is required, store at half capaci ty.

• For optimal battery life, use a Motorola iDEN approved NiMH Charger with your Motorola iDEN NiMH battery. Other chargers may not fully charge your NiMH or may yiel d a reduced number of charge cycles.

www.mot.com/iDEN

Page 65

Optional Accessories

Rapid Travel Charger

Using the NTN90 35 Rap i d Tra ve l Ch a r ger , you can charge a batte r y from an electrical outlet.

Accessory Connector

Rapid Travel Charger

Figure 2. Using the Travel Charger

Using the Rapid Travel Charger (110V/220V/240V)

1. While holding the r750plus phone with its front facing you, insert the accessory connector (with the Motorola logo facing you) into the slot on the bottom of the r750plus phone until you hear a click.

2. Insert the Rapid Travel Charger transformer into an AC wall outlet. The power light (green LED) on the accessory power supply will come on.

Rapid Travel Charger Operating Specifications

Input voltage range: 110V/220V/240V. Operating temperature range: 0°C to +50°C.

Page 66

Veh icula r Bat tery Ch arger

The NTN9034 Vehicular Battery Charger enables in-vehicle communications by charging t he NiMH battery and pr oviding power to your r750plus phone.

The power light (green LED) will light when the Vehicular Battery Charger is receiving po wer .

Accessory Connector

Figure 3. Using the Vehicular Battery Charger

Using the Vehicular Battery Charger

1. Attach the Vehicular Battery Charger’s accessory connector to the bottom of the r750plus phone. While holding the r750plus phone with its front toward you, insert the accessory connector (with the Motorola logo facing you) into the slot on the bottom of the r750plus phone until you hear a click.

2. Remove the ve hicle ’s cigare tte lighte r plug from the cigare tte lighte r receptacle.

3. Plug the Vehic ular Battery Charger into the cigarette l i ghter receptacle. The power light (green LED) will turn on.

4. The r750plus phone may be turned off, turned on, or in use.

Removing the Vehicular Battery Charger

1. Unplug the Vehicular Battery Charger from the vehicle’s cigarette lighter receptacle.

2. Press the but tons on the accessory con nector and pull the accessory connector from the bottom of the r750plus phone.

Operating Specifications

Operating voltage ran ge: 10.8 - 33.0 Vdc. Operating temperat ure range: -30°C to +60°C

www.mot.com/iDEN

Page 67

Optional Accessories

Desktop Dual-Pocket Charger

The NTN9036 Desktop Dual-Pocket Cha rg er charges Motorola authorized batteries, as listed on Page 56, for the r750plus phone.

Alignment rails

LED indicators

Pin charge contacts

Front pocket – phone with Battery

Figure 4. Desktop Dual-Pocket Charger

Rear pocket

– Battery only

Power supply cord receptacle

(DC jack)

Charging a battery

1. Plug the power supply DC jack into the receptacle in the back of the Desktop Dual-Pocket Charger.

2. Plug the tr ansformer end of the power-supply cord i nto any standard AC wall outlet.

3. Insert an r750plus phone with an attached battery , into the charger’s front pocket. To do this, align the slots on the sides of the battery with the rails on the sides of the charger pocket. Make sure the metal co ntacts on the back of the battery are in contact with the charger contacts.

4. If the r750plus phone is properly seated in the front pocket, the charger’s front pocket LED indicator will light.

5. The charger has the c apability of disp laying th e batte ry’s charge status. The indicator will show the following: solid red=1- 30%; solid yellow=31 60%; flashing green=61 - 90% ; solid green=91 - 100%.

NOTE: Charging times may var y when performing data operations.

Data Operation

1. Insert the flat end of the iDEN Data Cable (FLN9581A) into the phone’s bottom Accessory connec to r.

2. Connect the opposite end of the data cable to the PC.

Page 68

Inserting and removing a battery from the rear pocket

Insert Remove

Figure 5. Adding and Removing a Battery from the Rear Pocket

1. Insert the battery with the Motorola label facing forward. To do this, align the sides of the battery with the charger rails.

2. Make sure the metal contacts on the bac k of the battery are in contac t with the charging contacts.

3. To remove the battery, pull it up and out of the Charger.

NOTE: If a battery is in the rear pocket, and the phone with a battery is

inserted into the front pocket, the battery in the front pocket will charge to full capacity before the battery in the rear pocket is charged. The LED for the rear pocket flashes yellow, indicating that its battery is waiting to be charged.

NOTE: To remove the battery from the rear pocket, hold the base of the

charger and pull the battery up.

Desktop Charger S tatus

The Charger displays the battery’s charge status. The in dica tor will sh ow on e of the following:

solid red =1- 30%; solid yellow =31-60%; fla s hing green =61- 90%; solid green =91-100%.

Desktop Charger Troubleshooting

If the battery is not charging and you see:

Flashing yellow indicator -

• The flashing yellow LED is used to indicate that the Charger’s pocket is in a wait state.

• If a battery is in the rear pocket, the rear pocke t’s LED continues to flash yellow until the battery in the front pocket is more than 90% charged (front pocket’s LED is solid green). This is normal operation.

• To protec t yo ur b a tte ry’s life expectancy, the Charger does not rapid charge a battery when its temperature is below 5

www.mot.com/iDEN

C (41oF) or above

Page 69

45oC (113oF).

No LED indication -

• Check that the r750plus phone with battery, or a battery alone, is inserted correctly.

• Make sure that the power supply is plugged into an appropriate AC outlet and that the connector is properly seated.

• Rear pock e t onl y: Remove the battery from the Charger. Use an ordinary pencil eraser to clean the three metal contacts on the battery and then place the battery in the Charger.

• If the LED indicator remains turned OFF, the battery may be defective and should be replaced.

Flashing red LED indicator -

• Remove the battery fr om the Charger. Use an ordinary pencil eraser to clean the thre e metal contacts on the battery and then pla ce the battery in the Charger.

Optional Accessories

• If the LED indicator remains turned OFF, the battery may be defective and should be replaced.

Both LEDs flash red -

• This indicates that the incorrect power supply is plugged in.

Page 70

Audio Adapter

The FLN2854A Audio Adapter connects an earpiece microphone or headset to your r750plus phone for privacy and hands-free operation.

The Audio Adapter fits onto the bottom of the r750plus phone and provides a standard 2.5mm jack connecti on for an earpiece m icrophone or headset.

The following audio accessories are compat ible with the audio adap ter:

• Earp iece with Microphone (NT N 8367)

• Headset with Boom Microphone (NTN8513)

• Lightweight Headset with Microphone (NTN8496)

• Over-the-Ear Style Hea d se t ( N TN 84 97)

Audio Adapter

Release Button

Connector

Release Button

2.5mm jack

Figure 6. Using the Audio Adapter

Using the Audio Adapter

1. Hold the phone and the Audio Adapter fac in g you so that you see the Motorola logo on the adapter.

2. Insert the Audio Adapter’s connector into the r750plus phone Bottom Accessory Connector. You will hear the connector snap into place.

NOTE: When the audio adapte r and earpiece or headset are connec ted, all

audio, including tones, will be routed to the audio accessory’s earpiece.

Attaching/Detaching the Earpiece Microphone or Headset

1. Insert the 2.5mm plug of the earpiece microph one or headset cord into the jack of the Audio Adapter.

2. Pull on the plug, not on the cord, to remove the earpiece

microphone.

www.mot.com/iDEN

Page 71

Optional Accessories

Removing the Audio Adapter

1. Simultaneously press the release buttons located on either side of the Audio Adapter and pull the Audio Adapter from the r750plus phone.

Battery Belt Clip

The HLN9844A Battery Belt Clip provides a convenient means by which to carry your r750plus phone with you.

Belt Clip Tab

Battery (partial view)

Figure 7. Battery Belt Clip

Using the Battery Belt Clip

1. Slide the belt clip into the back of th e ba tte ry (pu sh u n til th e c lip loc k s into

place).

2. Clip the r750plus phone to your belt.

3. To remove the clip from the battery, push the holder tab outward and slide

the clip out of the battery.

NOTE:A small flathe ad s crewdriver is recommended to push th e h older tab

outward when removing the clip.

Leather Carry Case

• The FLN9580A Leather Carry Case prot ects you r r750plus phone while on

the go

• Includes a leather belt clip for easy attachment to a belt or purse

*Remove the belt clip from the phone before inserting it into the leather case.

Page 72

• Accommodates most r750plus phone accessories including travel chargers, audio accessories, vehicle accessories, and data accessories.

Hard-Install Car Kit

NOTE: The FLN2570A Hard-Install Car Kit enables in-vehicle communica-

tions by providing extended RF coverage, the ability to connect to 12Vdc or 24-Vdc power sources, data interface, and the ability to rapidcharge the battery.

The FLN2570A includes:

• Visor Microphon e

• Remote PTT

• External 4-watt Spe aker

• Phone Coupler

• Junction Box.

An external Push-To-Talk (PTT) button is also included. When the phone is turned off, the Hard-Install Ca r Kit charges th e Standard ba ttery in 75 minutes to 90% capacity. Charging time will be longer if the phone is operational during charge time.

Figure 8. Hard-Install Car Kit

www.mot.com/iDEN

Page 73

Optional Accessories

Remote Speaker/Microphone

The FLN2800A Remote Speak er/ Mi crophone (RSM) provides a convenient means of communicat ing by having a spe aker, a microphone , and a Push-toTalk (PTT) button in a single, hand-held or clip -on accessory. The RSM also includes a 3.5 mm audio jack (located on the opposite side of the PTT) to accept secondary receiver audio accessories.

PTT Button 3.5mm Audio Jack

Speaker /

Microphone

Accessory

Connector

Attaching and Removing the Swivel Clip

To attach the swivel clip to the remote speaker/ microphone:

1. Position the clip with the releas e tab pointing upward and align the met al plate edges of the swivel clip with the plastic slots on the RSM’s rear housing.

2. While holding the clip open, slide the metal plate in and push down firmly until the parts snap together.

To remove the swivel clip from the remote speaker/ microphone:

1. Carefull y pu s h the fla t bla de of a #2 slotted scre w driver (or similar instrument) between the RSM’s housing and the swivel clip’s metal release tab, as shown in the figure.

2. While performing step 1, push the swivel clip toward the top of the RSM.

3. As the release tab disengages, remove the screwdriver and pull t he swivel clip completely away from the unit.

Connecting the Remote Speaker/Microphone to the Portable

To attach the accessory connector, position the portable so that it faces you.

Page 74

1.Position the accessory connector so that its coiled cord extends from the bottom of the portable and its latch is on your left.

2.Insert the RSM’s accessory connector into the bottom of the portable (push both tabs on the accessory connector when inserting into the portable).

3.Push the accessory connector firmly against the portable to make sure it is held in place.

4.Attach the smaller end of t he cable-restraint clip on the straight portion of the coiled cord.

5.Attach the larger end of the cable-restraint clip to the base of the antenna.

6. Adjust the cord length in the smaller end of the cable restraint clip until it is comfortable.

Operation

Please read the safety informatio n co nt ai ne d in the use r’s guide supplied with the portable before operating this equipment.

The remote speaker/microphone (RSM) only operates when the portable is in the voice-dispat ch mode (group or private call ) .

Wearing the RSM

For optimum performance from your RSM, wear the radio and RSM so that the accesso ry cord will not cross over or touch the antenna. Also, t ry to wear the radio and accessory combination fairly close to each other to avoid strain on the acces sory connector.

Receiving:

When the RSM is connected to the radio’s bottom accessory connector, t he radio’s speaker is muted, and the au di o is only heard from the RSM speaker. Similarly, whe n a secondary receiver audio accessory is plugged int o t he 3.5 mm audio jack, audi o to the RSM is rerouted to the secondary accessory.

Transmitting:

Connecting the remote s peaker/microphone to the radio does not disable the radio’s microphone and PTT button.

www.mot.com/iDEN

Page 75

Safety and General Inf ormation

Safety and General Information

IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION.

READ THIS INFORMATION BEFORE USING YOUR INTEGRATED MULTI-SERVICE POR TABLE RADIO.

RF Operatio nal Ch aracte risti cs

Your radio product contains a radio frequency transmitter to convey the information you wish to send as well as occasional automati c sign als used to sustain connection t o t he wi rel ess network, and a receiver which enables you to receive communication and connection information from the network.

Exposure To Radio Frequency Energy

Your Motorola Radio Produc t is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy:

• United States Federal Communications C ommission, Code of Federal Regulations; 47 CFR part 2 sub-part J

• American National Standards Institute (ANSI) / Institute of Electrical and Electronics Engineers (IEEE). C95. 1-1992

• Institute of Electrical and Electronics Engineers (IEEE). C95. 1-1999 Edition

• National Council on Radiation Protection and Measurements (NCRP) of the United States, Report 86, 1986

• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998

• National Radiological Prote c tio n Boa rd of the Unite d K ing do m , 199 5

• Ministry of Health (Can ada ). Saf ety Cod e 6. Limits of Huma n Exposu re to

Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 .

• Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 1999 (applicable to wireless phones only)

To assure optimal radio product performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures:

Page 76

Portable Radio Product Operation and EME Exposure

Antenna Care

Use only the supplied or an app r oved antenna. Unauthorized replacement

antennas, modi fications, or attachments could damage the phone and may violate FCC regulations.

DO NOT hold the antenn a when the radio prod uct is “IN USE”. Holding the antenna affects call quality and may cause the radio product to operate at a higher power level than needed.

Phone Operation

When placing or receiving a phone call, or using the group and private call functions with a Group/Private Speaker OFF (muted speaker icon visible in the display), hold you r radio pr od u ct as yo u wo u l d a w ir el ine t el ep ho ne . Speak

directly into the micropho ne.

Two-way radio operation

When using your radio product as a traditi onal two-way radio while making group o r p rivate calls wit h the Group/ Private Speaker ON (no speaker icon visible in the display),

hold the radio product in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips.

Body-worn operat i on

To maintain compliance with FCC RF exposure guidelines, if you wear a radio product on you r body when transmitting, always place the radio product in a Motorola approved clip, holder, holster, case, or body harness for this product. Use of non-Mot orola-approved accessori es may exceed FCC RF exposure guidelines. If you do n ot use a Motorola appr oved body-worn accessory and are not using the radio product in the intended use positions along side of the h ead in the phone mode or in front of the face in the two-way radio mode then e nsure the antenna and the radio is kept the following minimum distances from the body:

• Phone or Two-way radio mode: one inch (2.5 cm)

• Data operation using any data feature with or without an

accessory cable : two inch es (5 cm)

www.mot.com/iDEN

Page 77

Safety and General Inf ormation

Approved Accessories

For a list of appr oved Motorola accessories call 1- 800-453-0920, visit our website at www.mot.com/iden, or look in the accessory section of this manual.

THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted leve ls of RF energy for the general population. The guideline s are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.

conducted using standard ope r at ing positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.

Before a phone model is available for sale to the public, it must be tested and certif ied to the FCC that is does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.48 W/kg and when tested on the body, as described in this user guide, is 0.59 W/kg during voice transmission using Phone Mode and 1.35W/kg during packet data transmission. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements.) While there may be differences between the SAR levels or various phones and at various positions, they all meet the government requirement for safe exposure.

The FCC has granted an Equipm ent Authorization for this model phon e with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on thi s model phone is on file with the FCC and can be found under the Display Grant section of http:// www.fcc.gov/oet/fccid after searching on FCC ID AZ489FT5800.

Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com.

______________________________________ * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6

watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

Tests for SAR are

Electro Magn etic In te rferenc e/ Com pat ibili ty

NOTE: Nearly every electronic dev ice is susceptible to electro magnetic interference (EMI) if inadequat el y shielded, designed or otherwi se configured for electromagnetic compatibility.

Page 78

Facilities

To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio product in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.

Aircraft

When instruc te d to do s o , turn off yo ur r ad io p r od uc t w h e n on bo a r d an a ir c ra f t. Any use of a radio product must be i n accordance with ap plicable regul a tions per airline crew instructions.

Medical Devices

Pacemakers

The Health Industry Manufacturers Association recommend s that a minimum separation of 6 inches (15 cm) be main tained between a ha ndheld wireless radio product and a pacemaker. These recommendations are consistent with the independent research by, and recommendations of, Wireless Technology Research.

Persons with pacemakers should:

• ALWAYS keep the radio product more than 6 inches (15 cm) from their pacemaker when the radio product is turned ON.

• Not carry the radio product in a breast pocket.

• Use the ear opposite the pacemaker to minimize the pot ent ial for

interference.

• Turn the radio product OFF immediately if you have any reason to suspect that interference is taking place.

Hearing Aids

Some digital wireless radio products may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.

Other Medical Devices

If you use any other personal medical device, consult the man ufacturer of yo ur device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.

www.mot.com/iDEN

Page 79

Safety and General Inf ormation

Use While Driving

Check the laws and regulations on the use of radio products in the area where you drive. Always obey them.

When using the radio product while driving, please:

• Give full attention to driving and to the road

• Use hands-free operation, if availab le.

• Pull off the road and park before making or answerin g a call if driving

conditions so require.

Page 80

Operationa l Warnings

For Vehicles Equipped with an Air Bag

Do not place a portable radio produ ct in the area ov er the air bag or in the air bag deployment area. An air bag inflates with great force. If a portable radio is placed in the air bag deployment area and the air b ag inflates, the radio product may be propelled with great force and cause serious injury to occupant s of the ve hic l e .

Potentially Explosive Atmospheres

Turn off your radio product, prior to entering any area with a potentially explosive atmosphere, unless it is a radio product type especially qualified for use in such areas (for example, Facto r y Mutual Approved). Do not remove, install, or ch arge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosio n or fire resulting in bodily injury or even deat h.

NOTE: The areas w ith potentially explosive atmospheres referred to

above includ e fueling areas such as below d eck s on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not al ways p os ted.

Blasting Caps and Areas

To avoid possible interference with blasting operations, turn off your radio product when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio”. Obey all signs and instructions.

www.mot.com/iDEN

Page 81

Safety and General Inf ormation

C a u t i o n

Operational Cautions

Antennas

Do not use any portable radio product that has a damaged antenna. If

a damaged antenna comes into co ntact with your skin, a minor burn can result.

Batteries

All batteries can cause property damage and/or bodily injury, such as burns if a conductive mat er ial such as jewelry, keys, or beaded cha ins touches exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects.

When the battery is detache d from the phone, your batteries are packed with a protect ive battery cov er. Please use this cover for storing your batteries when not in use.

Cleaning and Drying Consid erations

Using a le at her c arry case ma y he lp p rotec t the su rfa ces a nd help prev ent liquid s (e.g., rain) from entering into the interior of the radio product. This product is not water proof, and exposing the unit to liquids may result in permanent damage to the unit.

If your radio product interior gets wet, then do not try to accelerat e drying with the use of an oven or a dryer as this will damage the radio product and void the warranty. Instead, do the following:

1. Immediately power off the radio product.

2. Remove Battery from radi o product.

3. Shake excess liquid from phone.

4. Place phone and battery in an area that is at room temperature and has good air flow.

5. Let phone and battery dry for 72 hours before reconnecting the battery and/ or powering on the phone.

Page 82

If the phone does not work after following the steps listed above, contact your dealer for servicing information.

Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product. Avoid the use of any petroleum -ba s e d s olv e nt cle aners. Also, avo id ap p l yin g liquid s dire ctly on the radio product.

www.mot.com/iDEN

Page 83

Intrinsic a ll y Sa fe Radi o In for m a ti o n

Intrinsically Safe Radio

Information

FMRC Approved Equipment

Anyone intending to use a radio in a location where hazardous concentrations of flammable material exist (ha zardous atmosphere) is advised to beco me familiar with the subject of intrinsic safety and with the National Electric Code NFPA 70 (National Fire Protection Association) Article 500 (hazardous [classified] locations).

An Approval Guide, issued b y Fa ctory Mutual Research Corporation (FMRC), lists manufacturers and the products approved by FMRC for use in such locations. FMRC has also issued a voluntary approval standard for repair service (“Class Number 3605”).

FMRC Approval labels a re attach ed to th e radio to iden tify the unit a s bein g FM Approved for specified h azardous atmospheres. This label specifies the hazardous Class/Division/Group along with the part number of the battery that must be used. Depen ding on the d esign o f the portabl e un it, th is FM lab el ca n be found on the back of the radio housi ng or the bottom of the radio housing.Their Approval mark is shown below.

APPROVED

Page 84

W A R N I N G

Do not operate radio communications equipment in a hazardous atmosphere unless it is a type especially qualified (e.g. FMRC Approved) for such use. An explosion or fire may result.

Do not operate the FMRC Approved Product in a hazardous atmosphere if it has been physically damaged (e.g. cracked housing). An ex plosion or fire may result.

Do not replace or charge batteries in a hazardous atmosph ere. Contact sparking may occur while installing or removing batteries and cause an explosion or fire.

Do not replace or change accessories in a hazardous atmosphere. Contact sparking may occur while installing or removing accessories and cause an explosion or fire.

Do not operate the FMRC Approved Product unit in a hazardous location with the accessory contacts exposed. Keep the connector cover in place when accessories are not used.

Turn radio off before removing or installing a battery or accessory. Do not disassemble the FMRC Approved Product unit in any way that

exposes the internal electrical circuits of the unit.

Radios must ship from the Motorola manufacturing facility with the hazardous atmosphere capability and FM Approval labeling. Radios will not be “upgraded” to this capability and labeled in the field.

A modification changes the unit’s hardware from its original design configuration. Modifications can only be done by the original product manufacturer at one of its FMRC audited manufacturing facilities.

www.mot.com/iDEN

Page 85

Intrinsic a ll y Sa fe Radi o In for m a ti o n

W A R N I N G

Failure to use an FMRC Approv e d Produ ct un it with an FMRC Ap pro ved battery or FMRC Approv ed accessories specifically approved for that product may result in the dangerously unsafe condition of an unapproved radio combination being used in a hazardous location.

Unauthori zed or incorr ect modif icati on of an FMRC Appro ved Pro duct un it will negate the Approval rating of the product.

Repair of FMRC Approved Products

REPAIRS FOR MOTOROLA FMRC APPROVED PRODUCTS ARE THE RESPONSIBILI TY OF THE USER.

You may want to co nsid e r u s ing a rep air fa c ilit y tha t operates un der 3605 repair service approval.

W A R N I N G

Incorrec t r e pair or rela beling of any FMRC Approved Product unit could adversely affect the Approval rating of the unit.

Use of a radio that is not intrinsically safe in a hazardous atmosphere could result in serious injury or death.

FMRC’s Approval Standard Class Number 3605 is subject to change at any time without notic e to you , so yo u ma y want to ob ta in a current copy of 36 05 fro m FMRC. Per the Dec ember, 1994 publication of 3605 , some key definiti ons and service requirements are as follows:

Repair

A repair constitutes something done internally to the unit that would bring it back to its original c ondition Appro ved by FMRC. A re pair should b e done in an FMRC Approved facility.

Items not considered as repairs are those in which an action is performed on a unit which doe s not re quire th e oute r casing of the unit to be o pened in a man ner

Page 86

which exposes the in ternal electrical circuits of the unit. You do not hav e to be an FMRC Approved Repair Facility to perform these actions.

Relabeling

The repair facility shall have a method by which the replacement of FMRC Approval labels are controlled to ensure that any relabeling is limited to units that were originally shipped from the Manufacturer with an FM Approval label in place. FMRC Approval labels shall not be stocked by the repair facility. An FMRC Approval label shall be ordered from the original manufacturer as needed to repair a specific unit. Replacement labels may be obtained and applied by the repair facility providing satisfactory evidence that the unit being relabeled was originally an FMRC Approved un it. Verification m ay include, but is not limited to: a unit with a damaged Appr ov al label, a un it with a defe ct ive housing displa ying an Approv al label, or a custom er invoice indica ting the serial number of the unit and purchase of an FMRC Approved model.

Do Not Substitute Options or Accessories

The Motorola communications equipment certified by Factory Mutual is tested as a system and co nsists of the FM Approved porta ble, FM Approved battery, and FM Approve d ac ces s o ri e s or op tio ns , or bo th. This Approved porta ble and battery combination must be strictly observed. There must be no substitution of items, even if the substitute has been previously Approved with a different Motorola commu nications equipme nt unit. Approved configurations are listed in the FM Approval guide published by FMRC, or in the product FM Supplement . This FM Supplement is shipped with FM A pproved radio and battery combination from the manufacturer. The Approval guide, or the Approva l st anda rd Cla ss Nu mbe r 36 05 do cum ent f or repa irs an d serv ice, can b e ordered directly through Factory Mutual Research Corporation located in Norwood, Massachusetts.

www.mot.com/iDEN

Page 87

Accessory Safety Information

IMPORTANT: SAVE THESE ACCESSORY SAFETY INSTRUCTIONS

• Before using any battery or battery charger , read all the instructions for and cautionary markings on (1) the battery, (2) the battery charger, which may include a separat e wall-mounted power supply or transformer, and (3) the radio product using the batter y.

• Do not expose any battery charger to water, rain, or snow as they are designed for indoor or in-vehicle use only.

To reduce the risk of injury, charge only the rechargeable batteries listed in the Accessories section of this manual.

W A R N I N G

• To reduce the risk of damage to the cord or plug, pull by the plug rather than the cord when you disconnect the battery charger from the power source outlet.

• Do not operate any battery charger with a damaged cord or plug - replace them immediately.

• Battery chargers may become warm during operation, but not hot. If it becomes hot to th e to uc h , u nplug it from the power ou tle t im m edia te ly a nd discontinue its use.

• Use of a non-recommended attachment to a battery charger may result in a risk of fire, electric shock, or injury to persons.

• Make sure the battery charger power cord is located so that it will not be stepped on, tri pped over, or subjected t o damage or stress.

• An extension cord should not be used with any battery charger unless absolutely necessary. Use of an improper extension cord cou ld result in a risk of fire and electric shock. If an extension cord must be used, make sure that:

Other types of batteries may burst, cau sing personal injury and damage.

❒

The pins on the plug of the extension cord are the same number, size, and shape as those on the plug of the charger.

❒

The extension cord is properly wired and in good electrical condition.

❒

The cord size is 18A W G for lengths up to 100 feet and 16AWG

for lengths up to 150 feet.

• Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in a ny way; take it to a qualified service technician.

• Do not disassemble a battery charger; take it to a qualified service technician when service or repair is required. Incorrect reassemb ly may result in a risk of electric shock or fire.

• Maximum ambient temperature around the power supply or transformer of any battery charger should not ex ceed 40°C (104°F).

Page 88

• Th e output power from the power supply or transformer must not exceed the rating given on the Desktop Dual-Pocket Charger.

• The disconnection from the line voltage is made by unplugging the power supply from the AC receptacle.

• To redu ce risk of electr ic sho ck, un plug any ba ttery cha r ger from the ou tlet before attempting any main te nan ce or clea ning .

• For optimum charging performance, turn off the radio product while charging it in any battery charger.

www.mot.com/iDEN

Page 89

Warranty

Limited Warranty Motorola Com munica tion Product s

NOTE: This Warranty applies within the fifty (50) united states and the Dis-

trict of Columbia.

I. What This Warranty Covers and For How Long:

MOTOROLA, INC. (“MOTOROLA”) warrants the MOTOROLA manufactured iDEN Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:

iDEN Subscriber Digit al Mobile and Portable Units

Product Accessories One (1) Year Batteries One (1) Year

Rechargeable Batteries will be replaced during the applicable warranty period if:

a. the battery capacity falls below 80% of rated capacity, or b. the battery develops leakage.

MOTOROLA, at its options, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of thi s warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTO ROLA.

This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purcha ser, MO TOROLA do es not warra n t the installa tio n, maintenance or service of the Product.

One (1) Year

Page 90

which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operati on of the system as a whole under this warrant y.

II. Genera l Provisio ns:

This warranty sets forth the full extent of MOTOROLA’S responsibilities regarding t he Product, R epair, replacement or refund of the purchase pr ice, at MOTOROLA’S options, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INLCUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.

III. State Law Rights:

SOME STATES DO NOT ALLOW THE EXCL USION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY.

This warra nty gives specifi c legal rights , and there may be other rights whi c h may vary from state to state.

IV. How to Get Warranty Ser vice:

You must provide proof of purcha se (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or comm unication service provider), it can facilitate your obtaining warranty service. You can also call MOTOROLA at 1-800-453-0920 for warranty service location information.

V. What This Warranty Does Not Cover:

a. Defects or damage resulting from use of the Product in other than its

normal and customary manner.

b. Defects or damage from misuse, accident, wat er, or neglect.

www.mot.com/iDEN

Page 91

Warranty

c. Defects or damage from improper testing, operation, maintenance,

installation, alteration, modification, or adjustment.

d. Breakage or damage to antennas unless caused dir ectly by defects in

material workmanship.

e. A Product subjected to unauthorized Product modifications, disas-

semblies or repairs (including, without limitation, the addition to the Product of non-MOTOROLA supplied equipment) which adversely affect performance of the Produc t or in terfere with MOTOROLA’S normal warranty inspection and testing of the Product to verify any

warranty claim. f. Product which has had the serial number removed or made illegible. g. Rechargeable batteries if: (1). Any of the seals on the bat tery enclosure of cell s ar e broken or shoe

evidence of tampering. (2) The damage or de fect is caused by charging or using the battery in

equipment or service other than the Product for which it is specified. h. Freight costs to the repair depot.

i. A Product which, due to illegal or unauthorized alteration of the soft-

ware/firmware in the Product, does not function in accordance with

MOTOROLA’S published specifications or the FCC type acceptance

labeling in effect for the Product at the time the Product was initially

distribu te d fr om MO T O R O LA. j. Scratches or other cosmetic damage to Product surfaces that does not

affect the operation of the Product. k. Normal and customary wear and tear.

VI. Patent and Software Provisions:

MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable t o any such claim, but such defense and paymen ts are conditioned on the following:

a. that MOTOROLA will be notified promptly in writing by such pur-

chaser of any notice of such claim; b. that MOTOROLA will have sole control of the defense of such suit

and all negotiations for its settlement or compromise; and c. Should the Product or parts become, or in MOTOROLA’S opinion b e

likely to become, the subject of a claim of infringement of a United

States patent, that such purchaser will permit MOT O ROLA, at its

Page 92

option and expense, eith er t o procure for such purchaser the right to continue to usin g the P roduct or parts or to re place or m odify the same so that it becomes non-infringi ng or to grant such purchaser a credi t for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or part s as established by MOTOROLA.

MOTOROLA will have no liability with respect to any claim of patent infringe m ent which is based upon the combi nation of the Pr oduct or parts furnished hereunder with software, app aratus or device s not furnishe d by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product or any parts the reof.

Laws in th e Unit ed Stat es and ot her count ries preser ve for MOTORO LA cer tai n exclusive rights for copyrighted MOTOROLA software, such as the exclusive rights to reproduce in co pi es and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or us ed to product any derivative thereof. No other use including, without limitation, alteration, modificat io n, reproducti on, distribution, or reverse engineering of such MOTOROLA software or exercise or rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.

www.mot.com/iDEN

Page 93

Warranty

Limited Warranty Motorola Comm unica tion Products (Interna tion al )

NOTE:This Warranty applies within Singapore and the Philippines.

I. What This Warranty Covers and For How Long:

MOTOROLA warrants the MOTOROLA manufactured iDEN Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:

iDEN Subscriber Digit al Mobile and Portable Units

Product Accessories One (1) Year

Rechargeable Batteries will be replaced during the applicable warranty period if:

a. the battery capacity falls below 80% of rated capacity, or b. the battery develops leakage.

MOTOROLA, at its options, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warran ty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTO ROLA.

This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is n ot assignable or transfer able to any othe r party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warra nt the installation, mainten anc e or service of the Prod uc t.

One (1) Year

MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, o r for operation of the Prod uct with any an cillary equi pment, and all such equipment if expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty.

Page 94

II. General Provisions:

This warranty sets forth the full extent of MOTOROLA’S responsibilities regarding t he Product, R epair, replacement or refund of the purchase pr ice, at MOTOROLA’S options, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INLCUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.

III. How to Get Warranty Service:

You must provide proof of purcha se (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its au tho riz e d warranty service location s. If y ou first c o ntac t th e company which sold you the Product (e.g., dealer or comm unication service provider), it can facilitate your obtaining warranty service.

IV. What This Warranty Does Not Cover:

a. Defects or damage resulting from use of the Product in other

than its normal and customary manner. b. Defects or damage from misuse, accident, water, or neglect. c. Defects or damage from improper testing, operation,

maintenance, installation, alteration, modification, or

adjustment. d. Breakage or damage to antennas unless caused directly by

defects in material workmanship. e. A Product subjected to unauthorized Product modifications,

disassemblies or repairs (including, without limitation, the

audition to the Product of non-MOTOROLA supplied

equipment)

www.mot.com/iDEN

Page 95

Warranty

f. Product which has had the serial number removed or made

illegible.

g. Rechargeable batteries if:

1.Any of the seals on the battery enclosure of cells are b roken or shoe evidence of tampering.

2.the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which

it is specified. h. Freight costs to the repair depot. i. A Product which, due to illegal or unauthorized alteration of

the software/firmware in the Product, does not function in

accordance with MOTOROLA’S published specifications or

the local type acceptance labeling in effect for the Product at

the time the Product was initially distributed from

MOTOROLA. j. Scratches or other cosmetic damage to Product surfaces that

does not effect the operation of the Product. k. Normal and customary wear and tear. l. Exclusion for defects or damage arising from use of the

products in connection with non-MOTOROLA equipment.

V. Patent and Software Provisions:

a. that MOTOROLA will be notified promptly in writing by such

purchaser of any notice of such claim; b. that MOTOROLA will have sole control of the defense of

such suit and all negotiations for its settlement or compromise;

and c. Should the Product or parts become, or in MOTOROLA’S

opinion be likely to become, the subject of a claim of

infringement of a patent, that such purchaser will permit

MOTOROLA, at its option and expense, either to procure for

such purchaser the right to continue to us ing the Product or

Page 96

parts or to replace or modify the same so that it becomes noninfringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.

www.mot.com/iDEN

Page 97

Patent & Trademark Information

This product is protected under one or more of the following pat e nts:

4291475, 4365 221, 4369516, 43 74370, 4378603, 4390963, 4398265, 4400584, 4400585, 4434 461, 4455534, 44 86624, 4491972, 4523155, 4546329, 4574243, 4581602, 4581 749, 4585957, 45 93155, 4594657, 4602218, 4605987, 4616314, 4617520, 4628 529, 4629829, 46 33141, 4636593, 4636741, 4648125, 4649543, 4654655, 4680 787, 4704588, 47 11361, 4715063, 4717884, 4730195, 4731813, 4736277, 4737 976, 4741018, 47 42562, 4761621, 4764737, 4775998, 4791527, 4794489, 4797 929, 4797947, 47 98975, 4802236, 4803726, 4809356, 4811377, 4811404, 4817 157, 4827507, 48 29543, 4831647, 4843621, 4845772, 4851966, 4852090, 4860 336, 4860341, 48 68576, 4870686, 4872196, 4873683, 4876552, 4876656, 4876 740, 4879533, 48 85553, 4887050, 4890199, 4896124, 4896361, 4897873, 4903 326, 4903327, 49 04549, 4904992, 4905288, 4905301, 4912602, 4916262, 4918 431, 4918732, 49 22178, 4941203, 4942570, 4945570, 4956854, 4959851, 4963 812, 4964121, 49 70475, 4972355, 4972432, 4972455, 4975808, 4977589, 4977 616, 4979207, 49 84219, 4984290, 4989230, 4992753, 4996529, 5008925, 5010 309, 5010570, 50 14294, 5014346, 5017856, 5018188, 5020076, 5020091, 5020 092, 5020093, 50 23580, 5023866, 5023911, 5025387, 5027388, 5028083, 5028 859, 5029233, 50 36532, 5038253, 5040127, 5042071, 5045824, 5053924, 5055 800, 5055802, 50 55803, 5057762, 5058136, 5059885, 5060264, 5063340, 5065 408, 5067139, 50 70310, 5077757, 5077790, 5081674, 5083304, 5087004, 5093 632, 5095503, 51 07487, 5109400, 5111162, 5113400, 5113436, 5117073, 5117 441, 5117449, 51 17450, 5121047, 5121288, 5121412, 5122480, 5122722, 5124 889, 5127040, 51 27042, 5127100, 5128834, 5133010, 5134717, 5140286, 5140 635, 5142551, 51 42696, 5144533, 5146620, 5148471, 5148473, 5150075, 5150 359, 5150384, 51 51643, 5152006, 5152007, 5153590, 5157693, 5160898, 5162 144, 5163159, 51 64652, 5166596, 5166642, 5168522, 5170173, 5170485, 5170 492, 5175729, 51 75759, 5175874, 5182749, 5185566, 5185790, 5187640, 5187 809, 5192924, 51 93223, 5195106, 5195108, 5198887, 5200655, 5201069, 5203 009, 5203012, 52 03013, 5203021, 5204977, 5205751, 5210793, 5211581, 5212 815, 5212826, 52 14675, 5214774, 5216389, 5220290, 5220936, 5222078, 5222 104, 5222251, 52 30007, 5230093, 5233506, 5233633, 5235492, 5237257, 5237 570, 5239127, 52 41545, 5241548, 5241592, 5241688, 5242767, 5243355, 5247 544, 5247565, 52 49302, 5251331, 5255292, 5257414, 5259005, 5260170, 5260 988, 5261119, 52 62710, 5263052, 5263055, 5265271, 5267230, 5276588, 5276 707, 5276913, 52 76915, 5278832, 5278994, 5280630, 5280637, 5280644, 5285 443, 5287013, 52 87553, 5287555, 5287556, 5289505, 5297142, 5299232, 5301 365, 5308716, 53 21705, 5321737, 5321847, 5323421, 5325405, 5325429, 5327 578, 5327642, 53 31123, 5333153, 5336984, 5338909, 5343213, 5349588, 5351 245, 5359696, 53 61400, 5363071, 5365549, 5366826, 5367538, 5367558, 5371 791, 5373101, 53 75143, 5375258, 5379324, 5381114, 5384825, 5392000, 5392 023, 5392331, 53 96654, 5401927, 5402447, 5402448, 5404580, 5404582, 5406 146, 5406562, 54 08693, 5410275, 5410741, 5414711, 5420759,

Page 98

5424689, 54 28362, 5428820, 5428836, 5430416, 5432017, 543 4947, 5436802, 5438684, 54 42680, 5444764, 5446763, 5446766, 5448763, 544 8770, 5448771, 5453997, 54 57744, 5459640, 5459774, 5461643, 5463351, 546 3406, 5463628, 5463646, 54 63674, 5463688, 5463694, 5465409, 5465412, 546 9177, 5471671, 5475752, 54 77192, 5485506, 5485513, 5486843, 5487184, 548 8649, 5490177, 5491739, 54 93198, 5493700, 5493714, 5495206, 5495208, 549 7126, 5497382, 5497383, 54 99273, 5499394, 5499397, 5502437, 5504494, 550 4812, 5506490, 5508709, 55 09048, 5510693, 5511235, 5513078, 5513996, 551 9303, 5519346, 5519506, 55 19777, 5524276, 5526398, 5528666, 5530399, 553 0922, 5533119, 5535258, 55 35434, 5539360, 5542016, 5542103, 5542106, 554 2116, 5544250, 5546275, 55 46380, 5551078, 5551627, 5553137, 5553376, 555 4996, 5555550, 5557743, 55 59471, 5559522, 5559806, 5561436, 5561437, 556 1852, 5565881, 5566224, 55 68548, 5570453, 5572223, 5572224, 5574976, 557 7267, 5577268, 5583520, 55 84054, 5586146, 5588041, 5589796, 5590177, 559 4778, 5594951, 5598129, 55 98431, 5600341, 5604050, 5604468, 5604787, 560 6332, 5606560, 5606730, 56 13229, 5613863, 5615233, 5615259, 5615260, 562 1763, 5621766, 5625316, 56 25683, 5628001, 5628057, 5628089, 5629979, 563 0159, 5630210, 5630213, 56 30215, 5631538, 5633484, 5633786, 5634202, 564 0690, 5642368, 5646576, 56 49306, 5649309, 5656914, 5656917, 5657418, 565 9601, 5660945, 5661433, 56 64973, 5666429, 5668871, 5670912, 5673001, 567 3003, 5673287, 5674326, 56 75591, 5675702, 5678201, 5678221, 5678227, 568 0063, 5684384, 5691947, 56 92046, 5692101, 5696497, 5696821, 5699070, 569 9389, 5699408, 5701130, 57 01244, 5701589, 5703470, 5703539, 5703909, 570 6019, 5706313, 5708445, 57 10862, 5710987, 5711001, 5715520, 5715524, 571 7307, 5722052, 5724004, 57 26983, 5729221, 5732350, 5737327, 5737685, 573 8954, 5739792, 5740525, 57 42894, 5745116, 5745566, 5745848, 5747970, 574 8727, 5754141, 5754455, 57 54583, 5754645, 5754956, 5758271, 5760714, 576 1300, 5761610, 5764100, 57 64111, 5764730, 5764743, 5766794, 5771182, 577 1471, 5777521, 5777856, 57 84368, 5784419, 5784585, 5787128, 5787577, 579 3315, 5793866, 5796822, 57 97101, 5798716, 5799011, 5799256, 5801513, 580 1567, 5802111, 5805992, 58 07012, 5808585, 5808586, 5809020, 5809419, 580 9421, 5809430, 5809433, 58 09544, 5812093, 5812542, 5812590, 5814798, 581 5507, 5815570, 5815804, 58 15805, 5815807, 5815820, 5821820, 5822726, 582 6224, 5831826, 5832080, 58 32388, 5835006, 5835535, 5835785, 5838202, 584 1851, 5842122, 5844943, 58 46094, 5848072, 5848152, 5848356, 5848718, 585 0440, 5854549, 5854785, 58 54972, 5856763, 5856766, 5857148, 5857192, 585 9522, 5859567, 5859890, 58 61853, 5862460, 5862493, 5864799, 5865487, 586 7063, 5867127, 5867140, 58 67510, 5870670, 5872744, 5877633, 5878075, 587 8209, 5878336, 5878353, 58 80637, 5880646, 5881377, 5889737, 5889768, 588 9859, 5892410, 5893036, 58 94597, 5896054, 5896261, 5898933, 5900829, 590 1347, 5901357, 5903825, 59 03852, 5905956, 5907418, 5907615, 5909102, 591 0944, 5912648, 5920549, 59 20550, 5923007, 5924044, 5925835, 5925942, 592 6119, 5926503, 5926751, 59 30268, 5930288, 5930299, 5933330, 5936516, 593 6972, 5939939, 5940452, 59 40746, 5943027, 5945852, 5945964, 5946395, 594 9020, 5950131, 5950139, 59 53413, 5954817, 5955700, 5955999, 5956626, 596 3848, 5963876, 5964858, 59 66101, 5966667, 5966671, 5969545, 5974042, 597 7916, 5980268,

www.mot.com/iDEN

Page 99

Patent & Trademark Information

5982881, 5983 082, 5987012, 59 88577, 5995050, 5996178, 5999115, 5999821, 5999832, 6002 922, 6002937, 60 05498, 6006104, 6008636, 6009168, 6009309, 6009325, 6009 336, 6009552, 60 11699, 6011784, 6011959, 6011961, 6012634, 6014376, 6014 552, 6016312, 60 16422, 6018584, 6018651, 6018671, 6020787, 6021332, 6023 191, 6023615, 60 25753, 6035182, 6035191, 6035522, 6038457, 6040683, 6040 720, 6041241, 60 43721, 6043786, 6044153, 6047066, 6047084, 6049192, 6049233, 6049532, 6049704, 6049725, D284759, D285439, D288432, D288683, D28 9156, D292578, D 292920, D2956 27, D295973, D2 95975, D296187 , D297734, D29 7735, D297736, D 299136, D2991 37, D299232, D3 00742, D300827 , D301473, D30 1476, D301883, D 302015, D3036 56, D304189, D3 05427, D305717 , D306015, D30 6163, D306293, D 306299, D3064 41, D306583, D3 06594, D307271 , D309301, D30 9451, D314173, D 315330, D3153 46, D315543, D3 15559, D315565 , D315907, D31 6417, D316859, D 320780, D3227 83, D324024, D3 24388, D325028 , D325029, D32 5032, D325583, D 325915, D3270 61, D327062, D3 28302, D332261 , D332785, D33 4746, D337332, D 338012, D3388 87, D339127, D3 39335, D339336 , D339337, D33 9564, D339578, D 339581, D3395 82, D340709, D3 40710, D340711 , D340906, D34 1589, D342248, D 342663, D3427 29, D342730, D3 42741, D343173 , D343615, D34 3616, D343834, D 343835, D3438 36, D344087, D3 44271, D344444 , D344511, D34 4512, D344945, D 345977, D3467 85, D346786, D3 46798, D348071 , D348250, D34 8427, D348470, D 348665, D3486 66, D348668, D3 48674, D348880 , D349273, D34 9701, D350113, D 350348, D3503 49, D350350, D3 51375, D351840 , D352497, D35 2503, D352946, D 353131, D3533 61, D353587, D3 53588, D353591 , D354055, D35 4062, D355181, D 355895, D3560 84, D356309, D3 57224, D357249 , D357457, D35 7680, D357681, D 358148, D3590 52, D359734, D3 59735, D359959 , D360398, D36 0632, D361070, D 361763, D3628 40, D362852, D3 65094, D365817 , D366872, D36 7640, D368479, D 368696, D3691 62, D369359, D3 69797, D370016 , D370463, D37 0672, D372237, D 372481, D3727 03, D372896, D3 72919, D373585 , D373764, D37 4013, D374014, D 374227, D3744 24, D374872, D3 75732, D375733 , D375734, D37 5932, D375935, D 375952, D3761 27, D377792, D3 77934, D378366 , D378911, D37 9558, D379624, D 379981, D3799 82, D380468, D3 80751, D381021 , D381664, D38 2537, D382538, D 382872, D3831 15, D383748, D3 83749, D383759 , D384080, D38 4662, D384951, D 384952, D3852 71, D385283, D3 85555, D385873 , D385874, D38 5875, D385877, D 385888, D3861 75, D386494, D3 86757, D387054 , D387055, D38 7199, D387346, D 388078, D3880 79, D388080, D3 88081, D388082 , D388424, D38 8429, D388430, D 388775, D3887 83, D388793, D3 89157, D389476 , D389478, D38 9488, D389641, D 390221, D3902 22, D390509, D3 91567, D391955 , D391966, D39 3470, D394256, D 394423, D3944 25, D394433, D3 94438, D394439 , D395301, D39 5302, D395431, D 395642, D3958 75, D396472, D3 97337, D397689 , D397694, D39 8926, D400161, D 400165, D4002 04, D400209, D4 00496, D400526 , D400527, D40 0874, D401554, D 401929, D4032 65, D404397, D4 05080, D405782 , D405801, D40 6098, D406191, D 406586, D4066 95, D406812, D4 07063, D407685 , D407708, D40 8401, D408402, D 408418, D4087 83, D408815, D4 09186, D410459 , D410460, D41 0929, D411165, D 411196, D4112 02, D411204, D4 11507, D411535 , D411843, D41 1844, D412000, D 412487, D4127 09, D413893, D4 13898, D414159 , D415122, D41 5499, D416226, D 417224, D4174 49, D419155, D4 19290, D419565 , D419956, D42 0008, D420977, D 421005, D4214 43, D421982, D4 22275, D422595

Page 100

Additional patents are pending. MOTOROLA, the Styli zed M Logo and all other tr ademarks indicated as such

T9 is a tradem ark owned by Teg ic Communications, Inc.

All other product or service names mentioned in this manual are the property of their respective trademark owners.

www.mot.com/iDEN

Motorola R750, iDEN r750plus User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual