Motorola MBP9 User Manual

User’s Guide

Digital Audio Baby Monitor

Welcome...

to your new Digital Audio Baby Monitor!

Thank you for purchasing the MBP9. This baby monitor uses digital
communication which ensures that you can hear your baby clearly
without any distracting noise or interference.

Please retain your original dated sales receipt for your records. For
warranty service of your Motorola product, you will need to provide a

is not required for warranty coverage.

For product related questions, please call:

UK 0845 218 0890
ROI 08187 62092

This User’s Guide provides you with all the information you need to get
the most from your product.

Before you can use the baby monitor, you’ll need to insert and fully
charge the batteries on the Parent unit. Please read the Safety
Instructions in section 1 “Safety Instructions” before you install the units.

Got everything?

• 1 x Parent unit

• 1 x Baby unit

• 1 x Rechargeable battery pack for the Parent unit

• 1 x Power adapter for the Parent unit

• 1 x Power adapter for the Baby unit

Overview of your Parent unit

A B

7

1
2

3

4

1. Link indicator LED

2. Volume down button

4. Speaker

5. Volume UP button

6. Power (ON / ) LED

6
5

8

7. Volume indicator LEDs

8. Power adapter connector

9. Belt clip

10. Battery cover screw

11. Battery cover

Overview of your Baby unit

C D

12

15

FIND

Table of contents

1. Safety Instructions .....................................................................................5

2. Getting started ..........................................................................................6

9

10

11

2.1 Baby unit power supply................................................................................... 6

2.2 Parent unit battery installation ........................................................................7

2.3 Parent unit power supply ............................................................................... 8

2.4 Link...................................................................................................................9

2.5 Paging .............................................................................................................9

3. Using the MBP9 .........................................................................................9

3.1 Volume adjustment on the Parent unit ...........................................................9

4. Disposal of the device (environment) ................................................... 10

5. Cleaning ..................................................................................................10

6. Help ......................................................................................................... 10

7. General Information................................................................................11

Model: MBP9

The features described in this User’s Guide are subject to modications without prior notice.

1. Safety Instructions

WARNING:

STRANGULATION HAZARD - Keep the Unit and adapter cords more
than 1 metre from the cot and out of baby’s reach. NEVER place the Unit
or cords within the cot. SECURE the cords more than 1 metre away from
baby’s reach. Never use extension cords with AC Adapters. Only use the
AC Adapters provided.

BABY UNIT SET UP & USE:

Determine a location for the BABY UNIT that will provide the best

●

view of your baby in his/her cot.

Place the BABY UNIT on a flat surface, such as a dresser, bureau, or

●

shelf or mount the Unit to a wall securely using the keyhole slots
under the stand.

●

NEVER place the baby unit or cords within the cot.

WARNING

This Digital Audio Baby Monitor is compliant with all relevant standards regarding

safe to use. Therefore, always read the instructions in this User's Guide
carefully before using the device.

• Adult assembly is required. Keep small parts away from children when
assembling.

• This product is not a toy. Do not allow children to play with it.

• This Baby Monitor is not a substitute for responsible adult supervision.

• Keep this user's guide for future reference.

• Keep the cords out of reach of children.

• Do not cover the Baby Monitor with a towel or blanket.

• Test this monitor and all its functions so that you are familiar with it prior to
actual use.

• Do not use the Baby Monitor in damp areas or close to water.

• Do not install the Baby Monitor in extreme cold or heat, direct sunlight, or
close to a heat source.

• Only use the chargers and power adapters provided. Do not use other
chargers or power adapters as this may damage the device and battery
pack.

• Only insert a battery pack of the same type.

• Do not touch the plug contacts with sharp or metal objects.

• Connect the power adapters to easily accessible electrical outlets.

CAUTION

You chance the risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to their instructions.

2. Getting started

2.1 Baby unit power supply

2.1.1 Connect the small plug of the power adapter to the pow er connector

on the baby unit and the other end of the adapter to the mains socket
(100-240Vac~50/60Hz).

NOTE

Only use the enclosed power adapter (5V DC /600mA).

13

12. Power LED

13. Microphone

14

14. Power adapter connector

15. FIND key

2.2 Parent unit battery installation

Black

Red

The Parent unit can be used with either the rechargeable battery pack (2.4V
600mAh Ni-MH rechargeable battery pack supplied) or via the power adapter
supplied.

WARNING

Never use ordinary, non-rechargeable batteries. The power mains adapter
provides a charging function, and non-rechargeable batteries may burst and
cause damage!

NOTE

The Ni-MH rechargeable batteries must be charged for 16 hours before using
the Parent unit without the mains power.

We recommend the rechargeable batteries are installed, so that the unit
continues to work in the event of a mains power failure.

1. Using a screwdriver, turn the screw of the battery cover on the back of the
parent unit 90 degrees in a counterclockwise direction. Remove the battery
cover.

NOTE

Rotate the belt clip to its hanging position to make it easier to access the battery
compartment.

Do not try to turn the screw further than the OPEN position marked on the
cover.

2. Insert one battery pack with 2 AAA size Ni-MH recha

3. Close the battery compartment and turn the screw 90 degrees back in a
clockwise direction.

4. Press and hold . The Power (ON / ) LED will illuminate red if it only
has battery power.

NOTE

When the battery level is low, the red power LED will flash and the parent unit
will emit a warning beep once every minute. If the baby unit loses power or
goes out of range, the link will be lost and the parent unit will emit a warning
beep every 20 seconds and the green link LED on the parent unit will continue
to flash.

WARNING

Keep batteries away from small children.

Remove the batteries if this device is not going to be used for a long period of
time.

rgeable batteries.

2.3 Parent unit power supply

1. Connect the small plug of the power adapter to the power connector on
the parent unit and the other end of the adapter to the mains socket
(100V-240V ~ 50/60Hz).

NOTE

Only use the enclosed adapter (5V DC/600mA).

2. Press and hold . The Power (ON / )

LED will illuminate red if it only has mains
power.

unit.

5 6 7 8

2.4 Link

NOTE

Do not place the baby unit or cables in the cot or within arm's reach of the
baby (the unit should be at least 1 metre away).

connection.

• Install the parent unit in the same room as the baby unit, but make sure
there is at least 1 metre between the 2 units.

• When both units are switched on, the parent unit will search for the baby
unit.

• The green link LED on the parent unit will flash until the parent unit is
connected with the baby unit.

Once the link is established, the LED will stop flashing.

• The sound captured by the microphone on the baby unit will be audible on
the parent unit.

• The detected sound level is indicated by the LEDs on the front of the parent
unit.

• When the connection is established, move the parent unit to the room you
want to monitor from, but within the operational range.

• When there is no connection or out of range, the parent unit emits a
warning beep every 20 seconds and the green link LED on the parent unit
will flash.

• Move the parent unit closer until the link is re-established.

2.5 Paging

If the parent unit is misplaced, press FIND key on Baby unit.The parent unit will
emit a repeated beep tone for 30 seconds so that you can locate it.Press any
key on the parent unit, or the again on the Baby unit, to stop paging.

FIND

3. Using the MBP9

3.1 Volume adjustment on the Parent unit

There are 5 volume levels on the parent unit.

• Press to increase the volume level.

• Press t

o decrease the volume level.

NOTE

When you press or a beep is played at the volume level currently set, but
if you try to adjust beyond the maximum or minimum levels it will output a
double beep.

4. Disposal of the device (environment)

At the end of the product lifecycle, you should not dispose of this product with
normal household waste, but take the product to a collection point for the
recycling of electrical and electronic equipment. The symbol on the product,
User’s Guide and/or box indicates this.
Some of the product materials can be re-used if you take them to a recycling
point. By reusing some parts or raw materials from used products you make an
important contribution to the protection of the environment.
Please contact your local authorities in case you need more
information on the collection points in your area.
Dispose of the batteries in an environmentally-friendly manner
according

to your local regulations.

5. Cleaning

Clean the MBP9 with a slightly damp cloth or with an anti-static cloth. Never
use cleaning agents or abrasive solvents.

Cleaning and care

• Do not clean any part of the product with thinners or other solvents and
chemicals -- this may cause permanent damage to the product which is not
covered by the warranty. When necessary, clean it with a damp cloth.

• Keep your MBP9 away from hot, humid areas or strong sunlight, and do not
let it get wet.

• Every eort has been made to ensure high standards of reliability for your
MBP9. However, if something does go wrong, please do not try to repair it
yourself -- contact Customer Service for assistance.

6. Help

If the baby unit has lost its link with the parent unit

• Try recharging or replacing the batteries.

• If the baby unit is too far away it may be going out of range, so move the
baby unit closer to the parent unit.

• Reset the units by unplugging the units’ electrical power. Wait for around 15
seconds and plug it back in again. Allow up to one minute for the baby unit
and the parent unit to synchronise.

Interference

Noise interference on your parent unit

• Your baby and parent units may be too close. Move them further away from
each other.

• Make sure there is at least 1 metre between the 2 units to avoid feedback
howling.

• If the baby unit is too far away it may be going out of range, so move the
baby unit closer to the parent unit.

• Make sure the baby and parent units are not near other electrical
equipment, such as a television, computer or cordless/mobile telephone.

7. General Information

If your product is not working properly....

1. Read this User’s Guide.

2. Visit our website: www.motorola.com

3. Contact Customer Service at:

UK 0845 218 0890
ROI 08187 62092
To order replacement battery pack for parent unit, contact customer service.

Consumer Products and Accessories Limited Warranty
("Warranty")

Thank you for purchasing this Motorola branded product manufactured under
license by Binatone Electronics International LTD ("BINATONE")

What Does this Warranty Cover?

Subject to the exclusions contained below, BINATONE warrants that this

for use with this product that it manufactured to be free from defects in
materials and workmanship under normal consumer usage for the period
outlined below. This Warranty is your exclusive warranty and is not transferable.

Who is covered?

transferable.

What will BINATONE do?

BINATONE or its authorized distributor at its option and within a commercially
reasonable time, will at no charge repair or replace any Products or Accessories
that does not conform to this Warranty. We may use functionally equivalent
reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.

What Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA OR
BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF
THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE
ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE
FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation or exclusion of incidental or
consequential damages, or limitation on the length of an implied warranty, so
the above limitations or exclusions may not apply to you. This Warranty gives

jurisdiction to another.

Products Covered Length of converage

Consumer Products

One (1) year from the date of the

consumer purchaser of the product.

Consumer Accessories

Ninety (90) days from the date of the
accessories original purchase by the

Consumer Productsand Accessories
that are Repaired or Replaced

The balance of the original warranty
or for ninety (90) days from the date

returned to the consumer, whichever
is longer.

Exclusions
Normal Wear and Tear. Periodic maintenance, repair and replacement of

parts due to normal wear and tear are excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below 80% of their
rated capacity and batteries that leak are covered by this Warranty.
Abuse & Misuse. Defects or damage that result from: (a) improper operation,
storage, misuse or abuse, accident or neglect, such as physical damage
(cracks, scratches, etc.) to the surface of the product resulting from misuse; (b)
contact with liquid, water, rain, extreme humidity or heavy perspiration, sand,
dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for
commercial purposes or subjecting the Product or Accessory to abnormal
usage or conditions; or (d) other acts which are not the fault of MOTOROLA or
BINATONE, are excluded from coverage.
Use of Non-Motorola branded Products and Accessories. Defects or damage

Accessories or other peripheral equipment are excluded from coverage.

Defects or damages resulting from

service, testing, adjustment, installation, maintenance, alteration, or

authorized service centers, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers or date tags
that have been removed, altered or obliterated; (b) broken seals or that show
evidence of tampering; (c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola branded housings, or parts, are excluded

13

9

from coverage.
Communication Services. Defects, damages, or the failure of Products or
Accessories due to any communication service or signal you may subscribe to
or use with the Products or Accessories is excluded from coverage.

How to Obtain Warranty Service or Other Information?

To obtain service or information, please call:

UK 0845 218 0890
ROI 08187 62092

You will receive instructions on how to ship the Products or Accessories at your
expense and risk, to a BINATONE Authorized Repair Center. To obtain
service, you must include: (a) the Product or Accessory; (b) the original proof
of purchase (receipt) which includes the date, place and seller of the Product;
(c) if a warranty card was included in your box, a completed warranty card
showing the serial number of the Product; (d) a written description of the
problem; and, most importantly; (e) your address and telephone
number.These terms and conditions constitute the complete warranty
agreement between you and BINATONE regarding the Products or
Accessories purchased by you, and supersede any prior agreement or
representations, including representations made in any literature publications
or promotional materials issued by BINATONE or representations made by any

connection with the said purchase.

Frequency range 2.40 to 2.48 GHz
Electrical power Parent and Baby units:
Input : 100-240VAC, 50/60Hz (UK/EU plug);
Output : 5VDC, 600 mA
(Supplier: 5ESP, Model: 5E-AD050060-B/5E-AD050060-E;

10

BINATONE TELECOM PLC

1 Apsley Way London NW2 7HF, United Kingdom.
Tel: [phone] Fax: [phone]
e-mail: [e-mail]

We the manufacturer / Importer : Binatone Telecom Plc

Declare under our sole responsibility that the following product

Type of equipment:
Model Name: MBP9
Country of Origin:
Brand:

complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the
approximation of the laws of the Member States relating to Radio Spectrum Matters, the
Council Directive 2004/108/EC on the approximation of the laws of the Member States
relating to electromagnetic compatibility (EMC) and the European Community Directive
2006/95/EC relating to Electrical Safety.
Assessment of compliance of the product with the requirements relating to the essential
requirements according to Article 3 R&TTE was based on Annex III of the Directive
1999/5/EC and the following standard:

Radio Spectrum: EN300328 V1.7.1 (2006-10)
EMC: EN301489-17 V2.1.1 (2009-05)

Electrical Safety: EN60950-1:2006+A11:2009+A1:2010

The product is labelled with the European Approval Marking CE as show. Any Unauthorized
modification of the product voids this Declaration.
Manufacturer / Importer
(Signature of authorized person)

EC Declaration of Conformity

1 Apsley Way London
NW2 7HF, United Kingdom.

Digital Audio Baby Monitor

China
Motorola

EN301489-1 V1.8.1 (2008-04)

Supplier: GPE , Model: GPE003W-050060-2/
GPE003W-050060-3)
Parent unit:

London, 5 Jan 12

11

Manufactured, distributed or sold by Binatone Electronics

MOTOROLA and
the Stylized M Logo are trademarks or registered trademarks of
Motorola Trademark Holdings, LLC. and are used under license. All
other trademarks are the property of their respective owners.
© 2014 Motorola Mobility LLC. All rights reserved.

12

2.4V 600mAh Ni-MH rechargeable battery pack

(Supplier: BYD, Model: H-AAA600BX2-CT;

Supplier: GPI, Models: GPRHC063N118; GPRHC063N120

Supplier: GPI, Models: GPRHC063N118; GPRHC063N120)

Supplier: SANIK, Model: AAA600)

14

Signature: (Paul Tsui/ Product Operation Place & Date :

Director)

Printed in China
Versio .0

n 6