Motorola MBP88CONNECT User Manual
QUICK START GUIDE
• Connect the small plug of the power adapter to the Baby Unit
and the other end to a suitable electrical outlet.
• Only use the enclosed adapter (5V DC/ 1500mA).
• Ensure the ON/OFF switch is at the "ON" position.
IMPORTANT: The Baby Unit is able to operate without power
connection up to 3 hours with the support of built-in
rechargeable battery (Ni-MH battery 2.4V, 900mAh).
Please charge the unit at least 16 hours for the first time use.
WARNING:
Strangulation Hazard: Children have STRANGLED in cords. Keep
this cord out of the reach of children (more than 1m away).
Never use extension cords with AC Adapters. Only use the AC
Adapters provided.
For a full explanation of all features and instructions, please refer to the User’s Guide (available for
download from www.motorolastore.com).
1.
Power up your Camera Unit
MODEL:
MBP88CONNECT
UK EN
2. Setting up the Camera Unit for Wi-Fi® Internet Viewing
A. Install Hubble for Motorola Monitors App.
• Scan the QR code with your smart device and download the
Hubble for Motorola Monitors App from the App Store for iOS
devices or from the Google Play
• Install Hubble for Motorola Monitors App on your device.
B. View on Compatible Smartphones, Tablets and Computers.
TM
Store for AndroidTM devices.
Wi-Fi® Camera Connect to Internet
1. Open the Hubble for Motorola Monitors App on your compatible smartphone or tablet.
2. Follow the in-app instructions to create your Hubble account and connect to your Wi-Fi
3. Log in to your account on your compatible smartphone, tablet or via
https://app.hubbleconnected.com/#login
Please take note of the following minimum system requirements:
Smartphones/Tablets: iOS 7, Android™ 4.2
PC (only for viewing – NOT setup): Windows® 7, Mac OS® 10.7, Chrome™ 24, Internet Explorer® 9, Safari® 6,
®
18, Adobe® Flash® 15, Java™ 7
Firefox
Wi-Fi® requirements:
At least 0.6 Mbps upload bandwidth per camera. Test your Internet speed at: http://www.speedtest.net/
via Wi-Fi
®
Compatible
Viewing Devices
on your PC to access your live camera stream.
®
Camera.
3. Pairing Your Camera Unit with a Parent Unit
The unit works as an accessory camera with Motorola models: MBP88CONNECT
To re-register your Camera Unit (Baby Unit), or register a new Camera Unit (Baby Unit), follow the
procedures below:
1. Press the M button of the Parent Unit and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
is highlighted, and the
del/ add/
view/ scan
menu will pop up.
3. Press the + UP button or - DOWN button to select
add
, and press the O button to
confirm.
4. Camera
will pop up, press the + UP button or - DOWN button to select the
desired Camera, and press the O button to start searching for a camera unit, with "press PAIR
on cam" shown.
Note: If a camera is currently paired with the Parent Unit, its camera location (with a * against
it) cannot be selected for a new registration.
5. Press and hold the PAI R button on the underside of the Baby Unit until the Parent Unit finds the
camera, beeps and PAIR OK appears on the screen. The video from the camera will then
appear.
NOTE
A camera can only be registered to one Parent Unit at any one time.
/ / /
Loading...