Motorola MBP35BL User Manual

USER’S GUIDE

MBP35BL, MBP35BW

BABY MONITOR

USER’S GUIDE

The features described in this user’s guide are subject to

modifications without prior notice.

Welcome...

to your new Motorola Baby Monitor!

Thank you for purchasing the MBP35BL, MBP35BW. Now you can see and hear your baby sleeping in the other room or you can monitor your older children in their playroom.

Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.

For product related questions, please call:

0845 218 0890 in the UK

(65) 68412668 in Singapore

On the Web: www.motorola.com

This User’s Guide provides you with all the information you need to get the most from your product.

Before you can use the baby monitor, you’ll need to insert and fully charge the battery on the Parent unit. Please read the Safety Instructions on page 6 before you install the units.

Got everything?

• 1 x Parent unit

• 1 x Baby unit

• 1 x Rechargeable Ni-MH battery pack for the Parent unit

• 1 x Power adapter for the Parent unit

• 1 x Power adapter for the Baby unit

IMPORTANT

The non-rechargeable batteries for the Baby unit are not supplied with your product. We recommend the batteries to be installed before use, so that the unit continues to work in the event of a mains power failure.

Overview of your Parent unit

3 4

1. Display (LCD screen)

2. Up

< / Down > keys

Normal mode: Adjust speaker volume

Menu mode: Adjust setting

3. Power and Low battery LED

)

4. Voice Activation LED

5. Lullaby Play/Stop key

)

Press once to play lullaby. Press again to stop playing.

6. Lullaby selection key

Press to select a lullaby during playback.

Parent unit display symbols

Indicates that the Baby Unit is out of range or not linked to the Parent Unit.

Appears when setting the Temperature mode.

Appears when the temperature goes above 26°C (79°F).

High

Appears when the temperature goes below 14°C (57°F).

Low

Appears when setting the Night Light function.

Indicates that the Talk function is activated.

Appears when the Lullaby function is activated.

Appears when adjusting the Volume of the Parent Unit.

Appears when adjusting the Brightness of the Parent Unit display.

7. Microphone

8. Menu key

Press to open the Menu options

9. Tal k k e y Press and hold to speak to your baby.

10. Power key Press and hold to turn on/off the unit.

11. Antenna

12. Battery cover

13. Speaker

TALK

10 9 8

Parent Unit display symbols (cont’d)

Appears when the Parent Unit is in registration mode.

VOX

Appears when setting the Voice Activation level.

Overview of your Baby unit

1. Photo sensor

2. Camera lens

3. Infrared LEDs

4. Power LED

6. On/Off switch

7. Speaker

8. Antenna

9. Temperature sensor

5. Night lights

Important guidelines for installing your Baby Monitor

• To use your video monitor baby and parent unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions.

• Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or reinforced concrete, between the baby and parent unit may block the radio signal.

• The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TV's, computers, cordless or mobile phones, fluorescent lights or dimmer switches.

• Use of other 2.4GHz products, such as wireless networks, Bluetooth with this product, so keep the baby monitor away from these types of products, or turn them off if they appear to be causing interference.

• If the signal is poor, try moving the parent and/or the baby unit to different positions in the rooms.

systems or microwave ovens may cause interference

Table of contents

1. Safety Instructions ......................................................................... 6

2. Getting started................................................................................ 7

2.1 Baby unit battery installation...........................................................7

2.2 Baby unit power supply ..................................................................8

2.3 Parent unit battery Installation ........................................................8

2.4 Parent unit power supply................................................................9

2.5 Registration ..................................................................................10

3. Using the Baby Monitor MBP35BL, MBP35BW .........................11

3.1 Setting up .....................................................................................11

3.2 Night vision...................................................................................11

3.3 Talk function .................................................................................11

3.4 Adjusting the volume of the Parent Unit .......................................11

3.5 Playing a lullaby for your baby......................................................12

4. MBP35BL, MBP35BW Parent Unit Menu Options ..................... 13

4.1 Brightness.....................................................................................13

4.2 Temperature Display (ºC or ºF)....................................................13

4.3 Night Light ....................................................................................13

4.4 Voice Activation............................................................................14

5. Disposal of the device (environment) ........................................ 15

6. Cleaning ........................................................................................ 16

7. Help................................................................................................ 17

8. General Information ..................................................................... 18

ENGLISH

Table of contents 5

1. Safety Instructions

WARNING

This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before using the device.

• Adult assembly is required. Keep small parts away from children when assembling.

• This product is not a toy. Do not allow children to play with it.

• This baby monitor is not a substitute for responsible adult supervision.

• Keep this User’s Guide for future reference.

• Do not place the baby unit or cables in the cot or within arm's reach of the baby (the unit should be at least 1 metre away).

• Keep the cords out of reach of children.

• Do not cover the baby monitor with a towel or blanket.

• Never use extension cords with power adapters. Only use the power adapters provided.

• Test the baby monitor before use. Become familiar with its functions.

• Do not use the baby monitor near water.

• Do not install the baby monitor near a heat source.

• Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and batteries.

• For the parent unit, only insert a rechargeable battery pack of the same type. For the baby unit, use non-rechargeable batteries and insert with the correct polarity, as indicated in the battery compartment and in “2.1 Baby unit battery installation”.

• Do not touch the charger or plug contacts with sharp or metal objects.

CAUTION

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

6 Safety Instructions

2. Getting started

2.1 Baby unit battery installation

The camera uses either 3 AA size batteries (non-rechargeable batteries recommended) or the household power mains. The Baby unit has no

charging function!

screw

IMPORTANT

1. Loosen the screw in a counterclockwise direction using a small screwdriver. Remove the battery cover.

2. Install the 3 AA non-rechargeable batteries following the polarity as shown in the compartment. Close the battery compartment and tighten the screw in a clockwise direction.

3. Slide the power switch to the in green. To switch off the baby unit, slide the power switch to the

NOTE

When the battery level is low, the power LED will turn orange and will flash.

WARNING

Do not mix old batteries with new ones. Keep batteries away from small children. Do not short-circuit batteries or dispose of in fire. Remove the batteries if this device is not going to be used for a long period of time.

Getting started 7

position. The power LED will light up

OFF

position.

ENGLISH

2.2 Baby unit power supply

1. Connect the small plug of the power adapter to the baby unit and the

other end to the mains socket (230V/50Hz).

NOTE

Only use the enclosed power adapter (6V DC / 800mA).

2. Slide the power switch to the

in green.

3. To switch off the baby unit, slide the power switch to

position. The power LED will light up

OFF

position.

2.3 Parent unit battery Installation

Black

8 Getting started

Red

+ 17 hidden pages