Motorola MBP30 User Manual

USER’S GUIDE

MBP30

BABY MONITOR

USER’S GUIDE

The features described in this user’s guide are subject to

modifications without prior notice.

V 0.1

Welcome...

to your new Motorola Baby Monitor!

Thank you for purchasing the MBP30. Now you can see and hear your baby sleeping in the other room or you can monitor your older children in their playroom.

Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.

For product related questions, please call:

US 1-888-331-3383 or Canada 905-831-6555

On the Web: www.motorola.com

This User's Guide provides you with all the information you need to get the most from your product.

Before you can use the baby monitor, you'll need to insert and fully charge the battery on the Parent unit. Please read the Safety Instructions on page 6 before you install the units.

Got everything?

• 1 x Parent unit

• 1 x Baby unit

• 1 x Rechargeable Ni-MH battery pack for the Parent unit

• 1 x Power adapter for the Parent unit

• 1 x Power adapter for the Baby unit

IMPORTANT

The non-rechargeable batteries for the Baby unit are not supplied with your product. We recommend the batteries to be installed before use, so that the unit continues to work in the event of a mains power failure.

Overview of your Parent unit

1. Display

2. Menu key

3. Left key

4. Microphone

5. Down key

6. Right key

7. Up/Talk key

8. Power/Channel/Enter key

Parent unit menu icons

Adjust contrast level of the LCD

Turn the night vision on or off

Adjust the voice activation level

Set video timer to switch off the LCD

Pair a camera unit

9. Power adapter connector

10. Belt clip

11. Speaker

12. Battery cover screw

13. Battery cover

Overview of your Baby unit

1. Power LED

2. Infrared LEDs

3. Light sensor

4. Microphone

5. Camera lens

6. On/Off switch

7. Speaker

Table of contents

1. Safety Instructions .....................................................................6

2. Getting started ............................................................................7

2.1 Baby unit power supply ..............................................................7

2.2 Parent unit battery Installation.................................................... 8

2.3 Parent unit power supply ............................................................ 9

2.4 Registration ..............................................................................10

3. Using the Baby Monitor MBP30 .............................................. 11

3.1 Setting up .................................................................................11

3.2 Setting up .................................................................................12

3.3 Selecting camera channel ........................................................12

3.4 Pairing camera channels..........................................................12

3.5 Night vision............................................................................... 13

3.6 Talk function ............................................................................. 13

3.7 Adjusting the volume of the parent unit .................................... 13

4. MBP30 Parent Unit Menu Options...........................................13

4.1 Brightness ................................................................................ 13

4.2 Night Vision ..............................................................................13

4.3 Voice Activation........................................................................ 14

4.4 Video Timer..............................................................................14

5. Disposal of the device (environment).....................................15

6. Cleaning.....................................................................................15

7. Help ............................................................................................16

8. General Information..................................................................16

9. Wall mounting instructions .....................................................25

ENGLISH

Table of contents 5

1. Safety Instructions

WARNING

This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before using the device.

• Adult assembly is required. Keep small parts away from children when assembling.

• This product is not a toy. Do not allow children to play with it.

• This baby monitor is not a substitute for responsible adult supervision.

• Keep this user’s guide for future reference.

• Do not place the baby unit or cables in the crib or within arm's reach of the baby (the unit should be at least 3 feet away).

• Keep the cords out of reach of children.

• Do not cover the baby monitor with a towel or blanket.

• Never use extension cords with power adaptors. Only use the power adaptors provided.

• Test the baby monitor before use. Become familiar with its functions.

• Do not use the baby monitor near water.

• Do not install the baby monitor near a heat source.

• Only use the chargers and power adaptors provided. Do not use other chargers or power adaptors as this may damage the device and battery pack.

• Only insert battery pack of the same type.

• Do not touch the charger or plug contacts with sharp or metal objects.

CAUTION

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

6 Safety Instructions

2. Getting started

2.1 Baby unit power supply

1. Connect the small plug of the power adaptor to the baby unit and

the other end to the electrical outlet (110V/60Hz).

NOTE

Only use the enclosed power adaptor (5V DC / 500mA).

2. Slide the power switch to the ON position. The power LED will light

up in green.

3. To switch off the baby unit, slide the power switch to

OFF

position.

ENGLISH

Getting started 7

2.2 Parent unit battery Installation

screw

Black Red

1. Turn the belt clip so that it is in the hanging position.

2. Loosen the screw in a counterclockwise direction using a small

screwdriver. Remove the battery cover.

3. Insert the wire tab of the rechargeable battery pack into the contact

slot as shown above and fit the battery pack into the compartment.

4. Close the battery compartment and tighten the screw in a

clockwise direction.

5. Press F to switch ON the parent unit. The LCD screen illuminates.

- It will take a few seconds to start up the unit.

6. Press and hold F to switch OFF the parent unit.

The battery icon indicates that the battery pack is low and needs to be recharged. The battery pack takes about 15 hours to charge fully.

8 Getting started

2.3 Parent unit power supply

IMPORTANT

We recommend the rechargeable battery pack to be installed before use, so that the unit continues to work in the event of a mains power failure.

1. Connect the small plug of the power adaptor to the parent unit and

the other end to the electrical outlet (110V/60Hz)

NOTE

Only use the enclosed power adaptor (5V DC / 1000mA).

2. The LCD screen illuminates and starts up automatically after a few

seconds.

3. Press and hold F to switch OFF the parent unit.

NOTE

Once the baby and parent units are switched on, the display on the parent unit will show the video captured by the baby unit. When there is no connection or out of range, the icon on the LCD display will flash and the parent unit will beep continuously. Move the parent unit closer to the baby unit until the link is re-established.

Getting started 9

ENGLISH

+ 19 hidden pages