Motorola MBP11 User Guide

User’s Guide

Baby Monitor

The features described in this user's

guide are subject to modifications

without prior notice.

MBP11

Welcome...

to your new Motorola Baby Monitor!

Thank you for purchasing the MBP11. Now you can hear your baby sleeping in the other room.

Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.

For product-related questions, please call:

US and Canada 1-888-331-3383

On the Web: www.motorola.com

This User's Guide provides you with all the information you need to get the most from your product.

Before you can use the baby monitor, we recommend you insert and fully charge the battery in the parent unit, so that it continues to work if you disconnect it from the power outlet to carry it to another location. Please read the Safety Instructions on page 6 before you install the units.

Got everything?

• 1 x Parent unit (MBP11PU)

• 1 x Baby unit (MBP11BU)

• 1 x Rechargeable Ni-MH battery pack for the Parent unit

• 1 x Power adapter for the Parent unit

• 1 x Power adapter for the Baby unit

Overview of your Parent unit

1 Sound Level LED

3 GREEN and 2 RED LEDs turn on and off in real time to indicate the noise level in baby's room. When audio is being picked up by microphone of baby unit, the LEDs light up to in indicate audio level

with reference to the sensitivity setting. The more LEDs light up, the stronger the sound is.

If no LED lights up it means the sound level in baby's

room does not exceed the thresholds set through the parent unit.

The LEDs are also used for indicating the speaker volume setting on parent unit. The louder you set the speaker volume, the more LEDs light up.

2 Link Indicator

On when the parent unit is powered on and linked to the baby unit.

Flashes when the parent unit is out of range from baby unit.

Off when the parent unit is powered off.

3Power

Press and hold to power on/off the parent unit.

Volume +

Press to increase the speaker volume.

5Volume -

Press to decrease the speaker volume.

6 Charging Indicator

On steadily when in charging mode. Flashes when low battery is detected.

NOTE

Off even if connected with power adapter but without battery pack installed.

Overview of your Baby unit

1 Power Indicator

On when the baby unit is switched on. Off when the baby unit is switched off.

2Power

Press and hold to power on/off the baby unit.

Important guidelines for installing our Baby Monitor

• To use your baby unit and parent unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions.

• Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic doors or reinforced concrete, between the baby and parent unit may block the radio signal.

• The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TV's, computers, cordless or mobile phones, fluorescent lights or dimmer switches.

• If the signal is poor, try moving the parent and/or the baby unit to different positions in the rooms.

1. SAFETY INSTRUCTIONS ................................... 6

2. GETTING STARTED............................................ 7

2.1 Baby unit power supply.......................................7

2.2 Parent unit battery installation.............................7

2.3 Belt clip on parent unit and baby unit..................8

3. USING YOUR BABY MONITOR.......................... 9

3.1 Power on/off the parent unit................................9

3.2 Power on/off the baby unit ..................................9

3.3 Adjust speaker volume........................................9

4. DISPOSAL OF THE DEVICE

(ENVIRONMENT)............................................... 10

5. CLEANING......................................................... 10

6. TROUBLESHOOTING ....................................... 11

7. GENERAL INFORMATION................................ 12

8. TECHNICAL SPECIFICATIONS........................ 16

1. SAFETY INSTRUCTIONS

STRANGULATION HAZARD - Keep the unit and adapter cord more than 3 feet from the crib and out of baby's reach.

NEVER place camera or Secure the cord more than 3 feet away from baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided.

This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use. Therefore, always read the instructions in this User's Guide carefully before using the device.

• Determine a location for the baby monitor that will

• Place the baby monitor on a flat surface, such as a

• NEVER place the baby monitor or its cord within the

• Adult assembly is required. Keep small parts away from

• This product is not a toy. Don't allow children to play

6 SAFETY INSTRUCTIONS

WARNING:

cords within the crib.

provide the best audio reception of your baby in his crib.

dresser, bureau, or shelf.

crib.

children when assembling.

with it.

• This baby monitor is not a substitute for responsible adult supervision.

• Keep this User's Guide for future reference.

• Do not place the baby unit or cords in the crib or within reach of the baby (the unit and cords should be more

than 3 feet away).

• Do not cover the baby monitor with a towel or blanket.

• Never use extension cords with power adapters. Only use the power adapters provided.

• Test this monitor and all its functions so that you are familiar with it prior to actual use.

• Do not use the baby monitor near water.

• Do not install the baby monitor near a heat source.

• Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack.

• Only insert battery pack of the same type.

• Do not touch the plug contacts with sharp or metal objects.

CAUTION

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Use only battery pack with rating: 2.4V 400mAh.

+ 11 hidden pages