Motorola EQ7 User Manual

welcome
MOTOROKR
Quick Start Guide
EQ7
The MOTO Speaker System lets you enjoy your music with legendary JBL® loudspeaker technology.
™ EQ7 High-Performance Bluetooth® Stereo
1
The EQ7 not only delivers wireless music in rich, full sound and elegant style; it also serves as a speakerphone for phone calls—all at an extended range.
• Wireless music in premium sound
—Motorola wireless technology coupled with high-bandwidth, low-distortion JBL loudspeakers and acoustic design.
• Easy to use
—music controls that light up during wireless audio connection, and status indicators for Bluetooth connection, audio mute, and power.
• True wireless freedom
—take your music with you with the
extended wireless range of up to 100m/330ft.*
Note:
Before using your speaker system for the first time, be sure
to review the important safety and legal pamphlet, and follow instructions. Periodically review this information so you remember how to safely use your speaker system.
before you begin
before you begin
Take a moment before you get started to familiarize yourself with the components of your speaker system.
Audio
Power
Port
Light
Port
Microphone Mute
Indicator Light
Battery Compartment (on bottom)
Microphone
Power Indicator Light
Call Button
Volume Up Button
Forward Button
Play/Pause Button
Reverse Button
Volume Down Button
Power Button
Bluetooth
Indicator
* Wireless range can vary depending on Bluetooth class of source device, and be subject to interference from obstructions such as walls or other electronic devices.
2
power your system
power your system
batteries
You can power your speaker system using four AA alkaline batteries. Remove battery door (by turning to unlock symbol), insert batteries, and reattach battery door (by aligning the triangle on the door with unlock symbol and turning to lock symbol).
power adapter
You can power your speaker system using the included power adapter. Plug connector into the Power port as shown, then plug power supply into a wall outlet.
3
4
get the party started
get the party started
To turn your speaker system on and off
on the rear. The Power indicator light is steadily lit when the speaker system is on.
, press the Power button
connect wirelessly
connect wirelessl y
To listen to your music via Bluetooth wireless connection
well as make and receive handsfree calls, you need to pair (link) your speaker system with your Bluetooth phone and/or music device.
1
Turn off any Bluetooth devices previously paired with your speaker system.
2
Turn on the Bluetooth feature on your phone or music device.
3
Turn on your speaker system.
The Bluetooth indicator flashes to indicate your speaker system is in discoverable mode.
4
Place your phone or music device in Bluetooth search mode.
The phone or music device searches for your speaker system.
5
Select
Motorola EQ7
from search results on your phone or
music device.
6
Select OK or
Ye s
to pair your speaker system with your phone
or music device.
7
If prompted, enter
0000
for passkey.
When your speaker system successfully pairs and connects with your phone or music device, the Bluetooth indicator changes from flashing blue to steadily lit. Music playing from your connected music source is heard on your speaker system.
, as
connect wirelessly
Notes:
After successfully pairing your speaker system and Bluetooth device, you don’t need to repeat these steps. For each use, ensure that your speaker system is turned ON and that your device’s Bluetooth feature is ON.
Some music devices will automatically attempt to play music when EQ7 re-connects to it.
5
6
control your tunes
control your tu nes
Playback controls on your speaker system can be used when listening to wireless music streaming from a Bluetooth-enabled music device that also provides remote control capabilities (AVRCP).
—play/pause music
Press
Press and hold
Press
—skip to previous track
Press and hold—rewind track*
—stop music
Press
—skip to next track
Press and hold
—fast-forward track*
* If your music player supports this feature
When remote control capabilities are not supported by your music player, the EQ7 simply acts as a speaker system, and music should be controlled from your music player.
7
8
crank it up
crank it up
To adjust music volume
system.
, use the Volume buttons on your speaker
handsfree calls
handsfree calls
To make and receive calls using the speaker system, a Bluetooth handsfree (HFP) connection must be established with your phone (see “connect wirelessly” on page 6 for details). A handsfree connection with your phone is indicated when the Call button is steadily lit.
You’ll use these controls and indicators on your speaker system when making and receiving handsfree calls.
Press
—increase volume (step)
Press
—decrease volume (step)
Press and hold
—decrease volume
Press and hold
(continuous)
(continuous)
—increase volume
You’ll hear a tone when maximum or minimum volume is reached on your speaker system.
Note:
The volume setting on your music player may impact volume
on your speaker system.
receive a call
receive a call
When there’s an incoming call, the Call button flashes on your speaker system and you hear ringtone over your speakers. If wireless streaming music is playing when a call is received, it is paused until the call ends. If music is playing over a wired connection, it is muted when a call is received.
Volu m e B utt o n s
Microphone
Mute Indicator
9
10
Call Button and Indicator
Microphone
Reject
Mute
Call
Button
Button
Reject Call Button
while on a call
while on a call
When a call is active, the Call and Microphone Mute (Play/Pause) buttons are steadily lit on your speaker system.
Press
Press and hold
—adjust call volume (step)
—adjust call (continuous)
Press
—end call
Press
—answer call
Press and hold (either button)
reject call
Press
Microphone
Mute Indicator
mute microphone
When the call is muted, the Microphone Mute indicator light is on.
11
12
Loading...
+ 7 hidden pages