www.motorola.com/governmentandenterprise
MOTOROLA and the Stylized M Logo are trademark of Motorola, Inc. All other product or service names are property of their
respective owners. ©2006 Motorola. All rights reserved. AF4-04-008Rev.3
Accessories for a Customised Communication Solution
For Motorola Professional Series Portable Radios
Table of Content
Batteries |
3 |
Charging Accessories |
4 |
Vehicular Accessories |
5 |
Battery Maintenance |
|
System Plus |
6 |
Audio Accessories |
6 |
Surveillance Kits |
11 |
Ear Microphone System |
|
(Voiceducer) |
12 |
Commport Integrated |
|
Ear Mic/Receiver System |
13 |
Hands-Free Accessories |
|
for Special Applications |
13 |
Carrying Accessories |
14 |
Antenna |
15 |
Accessories for a Customised
Communication Solution
For Motorola
GP328/GP338, GP329/GP339 &
PTX700/760/780
Professional Portable Radio Series
2-way communication adds value to your work operations by integrating all functions seamlessly and delivering the right information to the right people at the right time.
Turn your professional radio system into a complete communications solution. Adding the proper accessories enhances the utility and productivity of your 2-way radio. Each Motorola original accessory ensures peak performance to match the standards you demand.
Batteries
Motorola original batteries are available in a variety of chemistries and capacities, designed to work hand-in- hand with your 2-way radios to ensure optimised performance and safety for your business.
Nickel Metal-Hydride
Part Number |
PMNN4008AR |
|
(comes with spring clip HLN9844) |
Capacity/ Size: |
High cap / standard |
Avg mAH: |
1450mAH |
Dimension: |
55 x 125 x 20 mm |
Part Number |
PMNN4045BR (MAG ONE) |
Capacity/ Size: |
High cap / standard |
Avg mAH: |
1400mAH |
Dimension: |
55 x 125 x 20 mm |
Part Number |
PMNN4009BR |
|
(comes with spring clip HLN9844) |
Capacity/ Size: |
Ultra-High / standard |
Avg mAH: |
1900mAH |
Dimension: |
55 x 125 x 22 mm |
Part Number |
HNN9010AR |
Capacity/ Size: |
Ultra-High / standard |
Avg mAH: |
1900mAH |
Dimension: |
55 x 125 x 22 mm |
FM Rating#: |
IS & NI |
Nickel Cadmium |
|
Part Number |
PMNN4012BR |
|
(comes with spring clip HLN9844) |
Capacity/ Size: |
High cap / standard |
Avg mAH: |
1550mAH |
Dimension: |
55 x 123 x 20 mm |
Part Number |
HNN9011BR |
Capacity/ Size: |
High cap / standard |
Avg mAH: |
1550mAH |
Dimension: |
55 x 125 x 20 mm |
FM Rating#: |
IS & NI |
Lithium-Ion |
|
Part Number |
PMNN4023CR |
|
(comes with spring clip HLN9844) |
Capacity/ Size: |
High cap / slim |
Avg mAH: |
1500mAH |
Dimension: |
55 x 125 x 16 mm |
*Important note: PMNN4008_R and PMNN4023_R are NOT APPLICABLE for use with GP328/338 low band radios.
#IS – Intrinsically safe
(Div 1, Class I, II, III, Groups C, D, E, F, G)
#NI – Non-incentive (Div 2, Class I Groups A, B, C, D)
ALKALINE CLAMSHELL BATTERY
Catering for radio users operating in remote areas without access to power source, this clamshell battery is powered by 12 “AA” alkaline cells for “always-on” communication.
The duty-cycle operation time at 5-5-90 is 10 hour (5 W Tx) and 30 hour (1 W TX) respectively which provides sufficient talk-time during remote emergency operation.
NNTN5332A Alkaline Clamshell Battery
Recommended AA Alkaline cells :
Part Number |
6005310A01 |
|
AA Cell, 4/PK Duracell |
|
6080390B60 |
|
AA Cell, 4/PK Energizer |
impres™ BATTERIERS
impres batteries, when used with an impres charger, provide automatic, adaptive reconditioning, end of life display, and other advanced features. Data is stored in the battery and communicated to the charger via an unique impres communication protocol which is designed to maximize talk time and optimize battery cycle life – all automatically.
impresTM NICKEL METAL-HYDRIDE
Part Number |
HNN4001A |
Capacity/Size: |
Ultra-High / standard |
Avg mAH: |
1900mAH |
Dimension : |
55 x 125 x 23 mm |
Part Number |
HNN4002A |
Capacity/Size: |
Ultra-High / standard |
Avg mAH: |
1800mAH |
Dimension : |
55 x 125 x 23 mm |
FM Rating# : |
IS & NI |
impresTM LITHIUM-ION |
|
Part Number |
HNN4003A |
Capacity/Size: |
Ultra-High / standard |
Avg mAH: |
2000mAH |
Dimension : |
55 x 125 x 23 mm |
HNN4001
PMNN4008* HLN9714 (order separately)
HNN9010
PMNN4023* (not shown with clip)
NNTN5332
HNN4002
3
Charging Accessories
Designed to work as a total system with the 2- way radio and battery, Motorola original chargers maximise the battery life and keep batteries in tiptop condition. Choose from the single tri-chemistry single/multi unit charger to the sophisticated 6-slot battery maintenance system that provides battery health diagnostic and re-conditioning capabilities.
Single Unit Tri-chemistry, Rapid Rate
Utilise an enhanced charging algorithm that helps maximise the life of your batteries. Compatible for NiCd, NiMH and Lilon batteries. Nickelbased batteries will be fully charged in approximately 90 minutes (depending on battery capacity). Full charging of Lilon batteries may take approximately 3 hours. Allows battery only or radio/battery combination charging.
PMTN4024A |
Single Unit Rapid Charger |
|
|
110V |
– US plug |
PMTN4025A |
Single Unit Rapid Charger |
|
|
230V |
– Euro plug |
PMTN4026A |
Single Unit Rapid Charger |
|
|
230V |
– UK plug |
Single Unit Conditioning Chargers
Utilise enhanced pulse charging interpersed with regular discharge pulse current to minimise “memory-effect” and overheating of NiCd and NiMH batteries. A standard capacity battery takes approximately 90 minutes for a full charge. Pulse maintenance charging after a full charge maintains peak capacity for the battery.
WPLN4107BR |
Single Unit Conditioning Charger |
|
|
110V |
–US plug (Battery adapter included) |
WPLN4106BR |
Single Unit Conditioning Charger |
|
|
230V |
–Euro plug (Battery adapter included) |
3080384G15 |
Cigarette Light Adapter |
WPPN4065BR
PMTN4025BR |
WPLN4106BR |
4
4-Slot Conditioning Chargers
Choose also from the four slot multi-conditioning chargers that utilises regular pulse current to minimise “memory-effect” and overheating of Nickel-Based batteries. Full charging in approximately 90 minutes. Batteries must be removed from radios to perform conditioning charging since radio contacts must be used.
WPPN4065BR |
4-Slot Multi Conditioning |
|
110V –US cord (Battery adapter not included) |
WPPN4076BR |
4-Slot Multi Conditioning |
|
230V –Euro cord (Battery adapter not included) |
WPPN4082BR |
GP328 Battery Adapter |
|
(Order separately) |
impres™ SMART ENERGY SYSTEM
The impres smart energy system ensures maximum talk-time and optimized battery cycle life through the use of its advanced charging algorithm and automatic reconditioning features. The smart energy system reconditions impres batteries when they
need it, automatically, keeping them in peak condition. Its advanced conditioning features allow batteries to be safely left on the charger for extended periods of time without incurring the damaging heat build-up which can rob batteries of cycle life. In addition, batteries left on the charger are kept fully charged so they are always ready when you need them. The impres system reconditions batteries when they need it based on their usage pattern. Talk time and cycle life are optimized and the need for manual maintenance programs reduced
or eliminated. Although complete smart features are realised only when using impres batteries and chargers, together impres chargers can also handle legacy batteries; in fact, the multi-unit chargers can simultaneously charge legacy and impres batteries.
impres™ SINGLE UNIT CHARGER
WPLN4182A impres™ Single Unit Charger 110V US Plug
WPLN4183A impres™ Single Unit Charger 230V UK Plug
WPLN4184A impres™ Single Unit Charger 230V EU Plug
WPLN4185A impres™ Single Unit Charger AUST Plug
impres™ MULTI-UNIT CHARGER
WPLN4187A impres™ Multi-unit Charger US Cord
WPLN4188A impres™ Multi-unit Charger UK Cord
WPLN4189A impres™ Multi-unit Charger EU Cord
WPLN4190A impres™ Multi-unit Charger AUST Cord
WPLN4145A impres™ Multi-unit Charger KOREA Cord
WPLN4182A
WPLN4187A