Page 1
CP150™/CP200
™
Commercial Series
Two-Way Radio User Guide
Manuel de l'utilisateur
de la radio bidirectionnelle
Page 2
Page 3
1
CONTENTS
CONTENTS
Computer Software Copyrights . . . . . . . . . . 2
Safety and Warranty . . . . . . . . . . . . . . . . . 3
Product Safety and RF Exposure
Compliance. . . . . . . . . . . . . . . . . . . . . . . .3
Battery Information . . . . . . . . . . . . . . . . . . . 3
Charging Batteries . . . . . . . . . . . . . . . . . 3
Limited Warranty. . . . . . . . . . . . . . . . . . . . . 4
Introduction . . . . . . . . . . . . . . . . . . . . . . . . 9
Conventional Radio Systems . . . . . . . . . . . 9
CP150™/CP200™ Radio Features . . . . . .9
Radio Wide Features . . . . . . . . . . . . . . . 9
Signaling Features . . . . . . . . . . . . . . . . . 9
Radio Overview . . . . . . . . . . . . . . . . . . . . 11
Parts of the Radio . . . . . . . . . . . . . . . . . . .11
CP150/CP200 Models . . . . . . . . . . . . . 11
On/Off/Volume Knob . . . . . . . . . . . . . .12
Channel Selector Knob . . . . . . . . . . . . 12
Push-to-Talk (PTT) Button . . . . . . . . . . 12
Microphone . . . . . . . . . . . . . . . . . . . . . 12
LED Indicator . . . . . . . . . . . . . . . . . . . . 12
Programmable Buttons . . . . . . . . . . . . 13
Indicator Tones . . . . . . . . . . . . . . . . . . . . . 15
Audio Indicators for Programmable
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Improved Audio Features . . . . . . . . . . . . . 16
Companding . . . . . . . . . . . . . . . . . . . . 16
Getting Started . . . . . . . . . . . . . . . . . . . . 17
Battery Information . . . . . . . . . . . . . . . . . . 17
Charging Your Battery. . . . . . . . . . . . . 17
Wall Charger. . . . . . . . . . . . . . . . . . . . . . . 17
Desktop Chargers. . . . . . . . . . . . . . . . . . . 18
Rapid Charger . . . . . . . . . . . . . . . . . . . 18
Slow Charger. . . . . . . . . . . . . . . . . . . . 19
Accessory Information . . . . . . . . . . . . . . . 20
Attaching the Battery . . . . . . . . . . . . . . 20
Removing the Battery . . . . . . . . . . . . . 20
Attaching the Antenna . . . . . . . . . . . . . 21
Removing the Antenna . . . . . . . . . . . . 21
Attaching the Belt Clip . . . . . . . . . . . . . 22
Removing the Belt Clip . . . . . . . . . . . . 22
Turning the Radio On or Off . . . . . . . . . . . 23
Adjusting the Volume . . . . . . . . . . . . . . . . 23
Selecting a Radio Channel . . . . . . . . . . . . 23
Receiving . . . . . . . . . . . . . . . . . . . . . . . . . 24
Monitoring. . . . . . . . . . . . . . . . . . . . . . . . . 24
Transmitting . . . . . . . . . . . . . . . . . . . . . . . 24
VOX Operation . . . . . . . . . . . . . . . . . . . . . 25
Connecting a VOX Headset . . . . . . . . 25
Enabling or Disabling VOX . . . . . . . . . 25
Enable/Disable Headset Sidetone . . . . . . 25
VOX Headset. . . . . . . . . . . . . . . . . . . . 25
Non-VOX Headset with In-Line PTT . . 26
Non-displayTOC.fm Page 1 Monday, November 17, 2003 1:55 PM
Page 4
2
CONTENTS
Repeater or Talkaround Mode . . . . . . . . . 26
Setting Tight or Normal Squelch. . . . . . . . 26
Setting the Power Level . . . . . . . . . . . . . . 27
Radio Calls . . . . . . . . . . . . . . . . . . . . . . . 29
Receiving a Selective Call . . . . . . . . . . . . 29
Receiving a Call Alert Page . . . . . . . . . . . 29
Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Talkback . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Starting System Scan. . . . . . . . . . . . . . . . 31
Stopping System Scan . . . . . . . . . . . . . . . 31
Starting Auto Scan . . . . . . . . . . . . . . . . . . 31
Stopping Auto Scan . . . . . . . . . . . . . . . . . 31
Deleting a Nuisance Channel . . . . . . . . . . 32
Restoring a Channel to the Scan List . 32
Prioritizing a Scan List Member . . . . . . . . 33
Accessories . . . . . . . . . . . . . . . . . . . . . . 35
Carry Accessories. . . . . . . . . . . . . . . . . . . 35
Chargers. . . . . . . . . . . . . . . . . . . . . . . . . . 35
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Headsets . . . . . . . . . . . . . . . . . . . . . . . . . 36
Surveillance Accessories . . . . . . . . . . . . . 36
Remote Speaker Microphones . . . . . . . . . 37
Ear Microphone Systems . . . . . . . . . . . . . 37
Antennas . . . . . . . . . . . . . . . . . . . . . . . . . 38
Miscellaneous. . . . . . . . . . . . . . . . . . . . . . 38
COMPUTER SOFTWARE
COPYRIGHTS
The Motorola products described in this
manual may include copyrighted Motorola
computer programs stored in semiconductor
memories or other media. Laws in the United
States and other countries preserve for
Motorola certain exclusive rights for
copyrighted computer programs including, but
not limited to, the exclusive right to copy or
reproduce in any form the copyrighted
computer program. Accordingly, any
copyrighted Motorola computer programs
contained in the Motorola products described
in this manual may not be copied, repro du ced,
modified, reverse-engineered, or distributed in
any manner without the express written
permission of Motorola. Furthermore, the
purchase of Motorola products shall not be
deemed to grant either directly or by
implication, estoppel, or otherwise, any license
under the copyrights, patents or patent
applications of Motorola, e xcept for the normal
non-exclusive license to use that arises by
operation of law in the sale of a product.
Non-displayTOC.fm Page 2 Monday, November 17, 2003 1:55 PM
Page 5
3
SAFETY AND
WARRANTY
SAFETY AND WARRANTY
PRODUCT SAFETY AND RF
EXPOSURE COMPLIANCE
ATTENTION!
This radio is restricted to occupational use
only to satisfy FCC RF energy exposure
requirements. Before using this product, rea d
the RF energy awareness information and
operating instructions in the Product Safety
and RF Exposure booklet enclosed with your
radio (Motorola Publication part number
68P81095C98) to ensure compliance with RF
energy exposure limits.
For a list of Motorola-approved antennas,
batteries, and other accessories, visit the
following web site which lists approved
accessories: http://www.motorola.com/cgiss/
index.shtml.
BATTERY INFORMATION
Charging Batteries
This product is powered by a nickel-cadmium
(NICd) or lithium-ion (Lilon) rechargeable
battery. Charge the battery before use to
ensure optimum capacity and performance.
The battery was designed specifically to be
used with a Motorola charger . Charging in nonMotorola equipment may lead to battery
damage and void the battery warranty.
Note: When charging a battery attached to a
radio, turn the radio off to ensure a full
charge.
The battery should be at about 77°F (25°C)
(room temperature), whenever possible.
Charging a cold battery (bel ow 50° F [10°C] )
may result in leakage of electrolyte and
ultimately in failure of the battery. Charging a
hot battery (above 95°F [35°C]) results in
reduced discharge capacity, affecting the
performance of the radio. Motorola rapid-rate
battery chargers contain a temperaturesensing circuit to ensure that batteries are
charged within the temperature limits stated
above.
Before using this product, read
the operating instructions for saf e
usage contained in the Product
Safety and RF Exposure booklet
enclosed with your radio.
!
C a u t i o n
00_SafetyNA.fm Page 3 Monday, November 17, 2003 1:55 PM
Page 6
4
SAFETY AND
WARRANTY
LIMITED WARRANTY
MOTOROLA COMMUNICATION
PRODUCTS
I. WHAT THIS WARRANTY COVERS AND
FOR HOW LONG:
MOTOROLA INC. (“MOTOROLA”) warrants the
MOTOROLA manufactured Communication
Products listed below (“Product”) against defects
in material and workmanship under normal use
and service for a period of time from the date of
purchase as scheduled below:
CP150/CP200 Portable Units Two (2) Years
Product Accessories One (1) Year
Motorola, at its option, will at no charge either
repair the Product (with new or reconditioned
parts), replace it (with a new or reconditioned
Product), or refund the purchase price of the
Product during the warranty period provided it is
returned in accordance with the ter ms of this
warranty. Replaced parts or boards are
warranted for the balance of the original
applicable warranty period. All replaced parts of
Product shall become the property of
MOTOROLA.
This express limited warranty is extended by
MOTOROLA to the original end user purchaser
only and is not assignable or transferable to any
other party. This is the complete warranty for the
Product manufactured by MOTOROLA.
MOTOROLA assumes no obligations or liability
for additions or modifications to this warranty
unless made in writing and signed by an officer
of MOTOROLA. Unless made in a separate
agreement between MOTOROLA and the
original end user purchaser, MOTOROLA does
not warrant the installation, maintenance or
service of the Product.
MOTOROLA cannot be responsible in any way
for any ancillary equipment not furnished by
MOTOROLA which is attached to or used in
connection with the Product, or for operation of
the Product with any ancillary equipment, and all
such equipment is expressly excluded from this
warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims
liability for range, coverage, or operation of the
system as a whole under this warranty.
00_SafetyNA.fm Page 4 Monday, November 17, 2003 1:55 PM
Page 7
5
SAFETY AND
WARRANTY
II. GENERAL PROVISIONS:
This warranty sets forth the full extent of
MOTOROLA's responsibilities regarding the
Product. Repair, replacement or refund of the
purchase price, at MOTOROLA’s option, is the
exclusive remedy. THIS WARRANTY IS GIVEN
IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION, IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL
MOTOROLA BE LIABLE FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF
TIME, INCONVENIENCE, COMMERCIAL
LOSS, LOST PROFITS OR SAVINGS OR
OTHER INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT
OF THE USE OR INABILITY TO USE SUCH
PRODUCT, TO THE FULL EXTENT SUCH MAY
BE DISCLAIMED BY LAW.
III. STATE LAW RIGHTS:
SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES OR
LIMITATION ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE
LIMITATION OR EXCLUSIONS MAY NOT
APPLY.
This warranty gives specific legal rights, and
there may be other rights which may vary from
state to state.
IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the
date of purchase and Product item serial number)
in order to receive warranty service and, also,
deliver or send the Product item, transportation
and insurance prepaid, to an authorized warranty
service location. Warranty service will be
provided by Motorola through one of its
authorized warranty service locations. If you first
contact the company which sold you the Product
(e.g., dealer or communication service provider),
it can facilitate your obtaining warranty service.
You can also call Motorola at 1-800-927-2744
US/Canada.
00_SafetyNA.fm Page 5 Monday, November 17, 2003 1:55 PM
Page 8
6
SAFETY AND
WARRANTY
V. WHAT THIS WARRANTY DOES NOT
COVER:
A Defects or damage resulting from use of the
Product in other than its normal and
customary manner.
B Defects or damage from misuse, accident,
water, or neglect.
C Defects or damage from improper testing,
operation, maintenance, installation,
alteration, modification, or adjustment.
D Breakage or damage to antennas unless
caused directly by defects in material
workmanship.
E A Product subjected to unauthorized
Product modifications, disassemblies or
repairs (including, without limitation, the
addition to the Product of non-Motorola
supplied equipment) which adversely affect
performance of the Product or interfere with
Motorola's normal warranty inspection and
testing of the Product to verify any warranty
claim.
F Product which has had the serial number
removed or made illegible.
G Freight costs to the repair depot.
H A Product which, due to illega l or
unauthorized alteration of the software/
firmware in the Product, does not function in
accordance with MOTOROLA’s published
specifications or the FCC type acceptance
labeling in effect for the Product at the time
the Product was initially distributed from
MOTOROLA.
I Scratches or other cosmetic damage to
Product surfaces that does not affect the
operation of the Product.
J Normal and customary wear and tear.
VI.PATENT AND SOFTWARE PROVISIONS:
MOT OROLA will def end, at its own expense, any
suit brought against the end user purchaser to
the extent that it is based on a claim that the
Product or parts infringe a United States patent,
and MOTOROLA will pay those costs and
damages finally awarded against the end user
purchaser in any such suit which are attributable
to any such claim, but such defense and
payments are conditioned on the following:
A that MOTOROLA will be notified promptly in
writing by such purchaser of any notice of
such claim;
00_SafetyNA.fm Page 6 Monday, November 17, 2003 1:55 PM
Page 9
7
SAFETY AND
WARRANTY
B that MOTOR OLA will hav e sole control of the
defense of such suit and all negotiations for
its settlement or compromise; and
C should the Product or parts become, or in
MOTOROLA’s opinion be likely to become,
the subject of a claim of infringement of a
United States patent, that such purchaser
will permit MOTOROLA, at its option and
expense, either to procure for such
purchaser the right to continue using the
Product or parts or to replace or modify the
same so that it becomes non-infringing or to
grant such purchaser a credit for the Product
or parts as depreciated and accept its
return. The depreciation will be an equal
amount per year over the lifetime of the
Product or parts as established by
MOTOROLA.
MOTOROLA will have no liability with respect to
any claim of patent infringement which is based
upon the combination of the Product or parts
furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will
MOTOROLA have any liability f or the use of
ancillary equipment or software not furnished by
MOTOROLA which is attached to or used in
connection with the Product. The foregoing
states the entire liability of MOTOROLA with
respect to infringement of patents by the Product
or any parts thereof.
Laws in the United States and other countries
preserve for MOT OR OLA certain exclusive rights
for copyrighted MOTOROLA software such as
the exclusive rights to reproduce in copies and
distribute copies of such Motorola software.
MOTOROLA software may be used in only the
Product in which the software was originally
embodied and such software in such Product
may not be replaced, copied, distributed,
modified in any way, or used to produce any
derivative th e reof. No other use includin g,
without limitation, alteration, modification,
reproduction, distribution, or reverse engineering
of such MOTOROLA software or exercise of
rights in such MOTORO LA software is permitted.
No license is granted by implication, estoppel or
otherwise under MOTOROLA patent rights or
copyrights.
VII. GOVERNING LAW:
This Warranty is governed by the laws of the
State of Illinois, USA.
00_SafetyNA.fm Page 7 Monday, November 17, 2003 1:55 PM
Page 10
8
SAFETY AND
WARRANTY
Notes:
00_SafetyNA.fm Page 8 Monday, November 17, 2003 1:55 PM
Page 11
9
INTRODUCTION
INTRODUCTION
CONVENTIONAL RADIO SYSTEMS
Conventional radio systems typically refer to
unit-to-unit communications through a single
channel. Conventional systems also allow
radio users to extend communication coverage
by relaying their messages through a repeater.
To ensure coordinated use by multiple users,
each radio user must monitor the channel or
repeater before transmitting to verify that the
system is not currently busy.
CP150™/CP200™ RADIO
FEATURES
Radio Wide Features
• 4 or 16 Channels
• 2 Programmable Feature Buttons
• Busy Channel Lockout
• High/Low Po wer Settings (A v ailable f or 4W
& 5W models only)
• Repeater/Talkaround
• Voice Operated Transmit
• Transmit Time-Out Timer
• Monitor and Sticky Monitor
• System Scan with Single Priority Scan
Signaling Features
• MDC 1200 Signaling (Available for 4W &
5W models only)
• Quik-Call II Signaling (Available for 4W &
5W models only)
• DTMF Signaling
- Selective Radio
Inhibit Decode
- Radio Check
Decode
- PTT ID Decode
- PTT ID Encode
- Selective Inhibit
Decode
- Call Alert
Decode
- Selective Call
Decode
- DTMF PTT ID
Encode
01_Introduction.fm Page 9 Monday, November 17, 2003 3:49 PM
Page 12
10
INTRODUCTION
Notes:
01_Introduction.fm Page 10 Monday, November 17, 2003 1:56 PM
Page 13
11
RADIO OVERVIEW
RADIO OVERVIEW
PARTS OF THE RADIO
CP150/CP200 Models
(programmable)
Side Button 1
Push-to-Talk
(PTT) Button
(programmable)
Side Button 2
Accessory Connector
with a Dust Cover
LED Indicator
On/Off/Volume
Knob
Channel Selector
Knob
Microphone
02_Overview.fm Page 11 Monday, November 17, 2003 1:56 PM
Page 14
12
RADIO OVERVIEW
On/Off/Volume Knob
Turns the radio on or of f, and adjusts the
radio’s volume.
Channel Selector Knob
Switches the radio to different channels.
Push-to-Talk (PTT) Button
Press and hold down this button to t alk
(transmit); release it to listen.
Microphone
When sending a message, hold the
microphone 1 to 2 inches (2.5 to 5 cm) away
from your mouth, and speak clearly into it.
LED Indicator
Indicates power-up, transmit, receive, scan
status, Call Alert™, Selective Call, Monitor,
and battery status.
Basic Features
LED State/Color Indication
Red Transmitting
Flashing Red Receiving
Scan
Flashing Green Scanning for activity
Call Alert
†
Flashing Yellow Indicates receiving a Call Alert
Selective Call
†
Flashing Yellow
Indicates receiving a Selectiv e
Call
Sticky Monitor/Open Squelch
Yellow While monitoring
Low Battery
Flashing Red
when transmitting
Low battery leve l
†Available for 4W and 5W models only.
02_Overview.fm Page 12 Monday, November 17, 2003 1:56 PM
Page 15
13
RADIO OVERVIEW
Battery Charge Status
You can check battery charge status if your
dealer has preprogrammed one of the
programmable buttons. Hold down the
preprogrammed Battery Indicator button. The
charge status is shown by the color of th e
radio’s LED indicator.
Programmable Buttons
The two side buttons on your radio can be
programmed by your dealer as shortcuts to
various radio f eatures.
Check with your dealer for a complete list of
functions your radio supports.
Some buttons can access up to two features,
depending on the type of button press:
• short press — quickly pressing and releasing the programmable buttons
• long press — pressing and holding the
programmable buttons for a period of time
(default 1 1/2 seconds or programmed
value) before releasing
• hold down — pressing and holding down
the programmable buttons while checking
status or making adjustments
Depending on how your radio has been
programmed by your dealer, these functions
are activated EITHER through a short press
OR a long press, but NOT both.
A summary of programmable radio features
and corresponding page references appears
beginning on page 14.
In the “Feature” column, ha v e your dealer write
down the programmable buttons next to the
features that have been programmed to them.
Battery
Level
LED
Indicator
Good Green
Sufficient Yellow
Low Flashing Red
Very Low None
02_Overview.fm Page 13 Monday, November 17, 2003 1:56 PM
Page 16
14
RADIO OVERVIEW
Feature Short Press/Long Press Hold Down Page Button
Battery
Indicator
— Checks the battery charge status. 13
Sticky Monitor/
Monitor
A long press of the Monitor button
initiates. A short press of the
Monitor button cancels.
Monitors the selected channel for
any activity.
24
Volume Set Sounds a tone for adjusting the radio’s volume level. 23
Voice Operated
Transmission
(VOX)
Toggle VOX on and off. — 25
Power Level
†
T oggles y our radio’s transmit po wer
level between High and Low power.
—27
Repeater/
Talkaround
Toggles between using a repeater
and transmitting directly to another
radio.
—26
Squelch
Toggles your radio’s squelch level
between tight and normal squelch.
—26
†Available for 4W and 5W models only.
02_Overview.fm Page 14 Monday, November 17, 2003 1:56 PM
Page 17
15
RADIO OVERVIEW
INDICATOR TONES
High pitched tone Low pitched tone
AUDIO INDICATORS FOR
PROGRAMMABLE BUTTONS
Some programmable buttons use tones to
indicate one of two modes:
Scan Starts or stops the Scan operation. — 31
Nuisance
Channel Delete
Deletes a nuisance channel while
scanning.
—31
Feature Short Press/Long Press Ho ld Down Page Button
Self Test Pass Tone
Self Test Fail Tone
Positive Indicator Tone
Negative Indicator Tone
Button
Positive
Indicator Tone
Negative
Indicator T one
Scan Start scan Stop scan
Power Level
†
High power
selected
Low power
selected
Squelch Tight squelch Normal squelch
Repeater/
Talkaround
Does not use
repeater
Uses repeater
VOX VOX enabled VOX disabled
†Available for 4W and 5W models only.
02_Overview.fm Page 15 Monday, November 17, 2003 1:56 PM
Page 18
16
RADIO OVERVIEW
IMPROVED AUDIO FEATURES
Companding
Companding is a feature that allows further
improvement of voice quality. It compresses
your voice at transmission, and expands it
when receiving while simultaneously reducing
extraneous noise. However, to enjoy this
benefit, all transmitting and receiving radios
must have this feature activated.
02_Overview.fm Page 16 Monday, November 17, 2003 1:56 PM
Page 19
17
GETTING STARTED
GETTING STARTED
BATTERY INFORMATION
Charging Your Battery
If a battery is new, or its charge level is very
low, you will need to charge it before you can
use it. When the battery level is low and the
radio is in transmit mode you will see the LED
indicator flash red. Upon release of the PTT
button, you will hear an alert tone.
Note: Batteries are shipped uncharged from
the factory. Always charge a new
battery 14 to 16 hours before initial
use, regardless of the status ind icated
by the charger.
Note: Do not use the wall charger and
desktop charger at the same time
when charging.
WALL CHARGER
Note: Do not use the wall charger if using
lithium-ion (Li-Ion) or nickel-metal hyride
(NiMH) batteries. The wall charger is for
nickel-cadmium (NiCd) batteries only.
To Charge the Battery
1 Turn the radio off.
2 Lift the dust cover to expose the audio
accessory connector.
3 Insert the charging adapter into the
accessory connector.
4 Plug the charging adapter into an electr ical
outlet.
• The LED on the charging adapter lights
Red while the charger is plugged into an
electrical outlet.
Note: Do not leave the charger connected
to the radio when it is not connected
to the electrical outlet.
5 Unplug the charger from the electrical outlet
and radio after 10 hours.
Note: After the initial charge of 14 to 16
hours, do not charge the battery
more than 10 hours.
03_GetStarted.fm Page 17 Monday, November 17, 2003 1:56 PM
Page 20
18
GETTING STARTED
DESKTOP CHARGERS
Rapid Charger
A list of Motorola authorized batteries and
battery chargers appears on page 35. The
listed chargers will charge only Motorola
authorized batteries. Other batteries may not
charge.
1 Turn the radio off.
2 Place the battery, with or without the radio, in
the charger pocket.
• The charger LED indicates the charging
progress.
LED color Status
No LED Indication Battery inserted incorrectly
or battery not detected.
Single Green Flash Successful charger
power-up.
Flashing Red
*
Battery unchargeable or not
making proper contact.
Steady Red Battery is in Rapid charge
mode.
Flashing Yellow Battery in charger but wait-
ing to be charged. The battery temperature may be too
hot or too cold. The voltage
may be lower than the predetermined threshold level
for charging.
Flashing Green
†
Battery 90% (or more)
charged. Trickle charging.
Green Battery fully charged.
* Remove the battery from the charger and
use a pencil eraser to clean the three metal
contacts at the back of the battery. Place the
battery back into the charger. If the LED
indicator continues to flash red, replace the
battery.
† A standard battery may require 90 minutes to
charge to 90% capacity. Even though new
batteries might prematurely indicate a full
charge (steady green LED), charge the
battery for 14 to 16 hours prior to initial use
for best performance.
LED color Status
03_GetStarted.fm Page 18 Monday, November 17, 2003 1:56 PM
Page 21
19
GETTING STARTED
Slow Charger
1 Turn the radio off.
2 Place the battery, with or without the radio, in
the charger pocket.
• The charger LED indicates the charging
progress.
LED color Status
No LED Indication Battery inserted incorrectly
or battery not detected.
Steady Red Battery is in over night
charge mode. The battery is
fully charged after 11 hours.
03_GetStarted.fm Page 19 Monday, November 17, 2003 1:56 PM
Page 22
20
GETTING STARTED
ACCESSORY INFORMATION
Attaching the Battery
Removing the Battery
1 Align the battery to the battery rails on the
back of the radio (approximately 1/2 in. from
the top of the radio.)
2 Press the battery firmly to the radio and slide the
battery upward until the latch snaps into place.
3 Slide the battery latch, located on radio bottom,
into the lock position.
1 Turn off the radio if it is turned on (see page 23).
2 Slide the battery latch into the unlock position.
Disengage by pushing downward and holding
the latch towards the front of the radio.
3 With the battery latch disengaged, slide the
battery down from the top of the radio about
1/2 in. Once the battery is free from the
battery rails, lift it directly away from the radio.
Battery Latch
03_GetStarted.fm Page 20 Monday, November 17, 2003 1:56 PM
Page 23
21
GETTING STARTED
Attaching the Antenna Removing the Antenna
Turn the antenna clockwise to attach it. Turn the antenna counter-clockwise to remove
it.
03_GetStarted.fm Page 21 Monday, November 17, 2003 1:56 PM
Page 24
22
GETTING STARTED
Attaching the Belt Clip Removing the Belt Clip
1 Align the grooves of the belt clip with those of
the battery.
2 Press the belt clip downward until you hear a
click.
1 Use a key to press the belt clip tab away from
the battery to unlock the belt clip.
2 Slide the belt clip upward to remove it.
Belt Clip Tab
03_GetStarted.fm Page 22 Monday, November 17, 2003 1:56 PM
Page 25
23
GETTING STARTED
TURNING THE RADIO ON OR OFF ADJUSTING THE VOLUME
SELECTING A RADIO CHANNEL
Your radio offers 4 or 16 channels.
Note: Due to government regulations, some
channels may not be programmed. Ask
your dealer for more information.
To select a channel, turn the Channel
Selector knob clockwise or counterclockwise
until you reach the desired channel.
Turn the On/Off/
Volume Control
knob clockwise. If
power-up is
successful, you will
hear the Self-Test
Pass Tone
( ) and
see the LED flash
green.
If the radio fails to
power up, you will
hear the Self Test
Fail Tone
().
Turn the On/Off/
Volume Control knob
counter-clockwise until
you hear a click.
ON OFF
1 Hold down the Volume Set button (see page
14); you will hear a continuous tone.
2 Turn the On/Off/V olume Co ntr ol knob to the
desired volume level.
3 Release the Volume Set button.
03_GetStarted.fm Page 23 Monday, November 17, 2003 1:56 PM
Page 26
24
GETTING STARTED
RECEIVING
MONITORING
It is important to monitor traffic before
transmitting to ensure that you do not “talk
over” someone wh o is already transmitting.
TRANSMITTING
1 Turn your radio on.
2 Adjust the radio’s volume (see page 23).
3 Switch to the desired channel. To respond,
hold the radio in a vertical position, press the
PTT, and talk at a distance of about 1 to 2
inches (2.5 to 5 cm) from the microphone.
1 Press and hold the preprogrammed
Monitor button to access channel traffic.
2 Once channel traffice has cleared, proceed
with your call by pressing the PTT butto n.
3 A long press of the preprogrammed Monitor
button places the radio in Sticky Monitor
mode.
• You hear a high-pitched tone.
A short press of the Monitor button cancels
Sticky Monitor mode and returns the radio to
normal operation.
1 Turn your radio on.
2 Use the Channel Selector knob to select the
desired channel.
3 Hold the radio in a vertical position, press the
PTT, and talk at a distance of about 1 to 2
inches (2.5 to 5 cm) from the microphone.
4 Release the PTT to listen.
03_GetStarted.fm Page 24 Monday, November 17, 2003 1:56 PM
Page 27
25
GETTING STARTED
VOX OPERATION
When hands-free operation is desired, your
radio can be activated b y v oice alone usin g the
VOX feature when you speak through an
accessory that is connected to your radio.
Connecting a VOX Headset
Enabling or Disabling VOX
To enable or disable VOX operation, press the
preprogrammed VOX button (see page 14).
Note: Pressing the PTT button disables VOX.
– or –
You can select channels to enable or disable
VOX as preprogrammed by your dealer.
ENABLE/DISABLE HEADSET
SIDETONE
Your dealer can program your r adio so you can
hear your voice through a headset while you
speak.
VOX Headset
1 Turn off your radio.
2 Connect the VOX accessory to your radio and
turn the radio on.
1 Select a channel that has been
preprogrammed by your dealer to enable
VOX.
Note: Pressing the PTT button disables
VOX.
2 Select a channel that has not been
preprogrammed by your dealer to disable
VOX.
1 Turn off your radio.
2 Connect the VOX accessory to your radio.
3 Turn the radio on. During transmit, you will
hear your voice through the headset while
you speak.
03_GetStarted.fm Page 25 Monday, November 17, 2003 1:56 PM
Page 28
26
GETTING STARTED
Non-VOX Headset with In-Line PTT
REPEATER OR TALKAROUND
MODE
Talkaround Mode enables you to commu nicate
with another radio when either:
• the repeater is not operating
– or –
• your radio is out of the repeater’s range but
within communicating distance of another
radio.
Press the preprogrammed Repeater/
Ta lkaround button (see page 14) to toggle
between Repeater mode and Talkaround Mode.
SETTING TIGHT OR NORMAL
SQUELCH
Use this feature to filter out nuisance (unwanted)
calls and/or background noise. Howe ver,
tightening squelch could cause calls from remote
locations to be filtered out as well. In this case,
normal squelch may be more desirable.
Press the preprogrammed Squelch button
(see page 14) to toggle between tight and
normal squelch.
4 To disable the headset sidetone, turn off your
radio and turn the radio on again.
1 Turn off your radio.
2 Connect the non-VOX accessory to your
radio.
3 Press and hold the In-line PTT on your
headset.
4 Turn the radio on and release the PTT once
the radio has completed start-up. During
transmit, you will hear your voice through the
headset while you speak.
5 To disable the headset sidetone, turn off your
radio and turn the radio on again.
03_GetStarted.fm Page 26 Monday, November 17, 2003 1:56 PM
Page 29
27
GETTING STARTED
SETTING THE POWER LEVEL
(Available for 4W and 5W models only)
Each channel in your radio has a predef ined
transmit power level that can be changed.
• High power allows you to reach a radio that
is farther away.
• Low power conserves the battery’s charge.
Press the preprogrammed Power Level button
(see page 14) to toggle between lo w and high
power.
03_GetStarted.fm Page 27 Monday, November 17, 2003 1:56 PM
Page 30
28
GETTING STARTED
Notes:
03_GetStarted.fm Page 28 Monday, November 17, 2003 1:56 PM
Page 31
29
RADIO CALLS
RADIO CALLS
RECEIVING A SELECTIVE CALL
(Available for 4W and 5W models only)
When you receive a Selective Call:
• The LE D ind ica to r flas he s yellow, if programmed by your dealer.
• You hear two high pitched tones.
RECEIVING A CALL ALERT PAGE
(Available for 4W and 5W models only)
When you receive a Call Alert page:
• The LE D ind ica to r flas he s yellow, if programmed by your dealer.
• You hear four high pitched tones.
To acknowledge the page, press and release
the PTT button; to cancel the page, press any
other key.
1 To acknowledge the call, press and release
the PTT button.
2 Press and hold the PTT button to talk;
release to listen.
04_RadioCall.fm Page 29 Monday, November 17, 2003 1:57 PM
Page 32
30
RADIO CALLS
Notes:
04_RadioCall.fm Page 30 Monday, November 17, 2003 1:57 PM
Page 33
31
SCAN
SCAN
Your radio is equipped with the Scan feature,
which allows you to monitor multiple channels
for voice activity. The radio will stop on a
channel when it detects activity on it.
Your radio automatically s witches to a channel
within the scan list when it detects activity.
The LED indicator blinks green during a scan
operation and stops blinking when the radio
switches to a channel.
There are two types of Scan available in your
radio:
•System Scan
• Auto Scan
TALKBACK
The Talkback feature allows you to respond to
a transmission while scanning. If a
transmission is detected on a channel while
scanning, the radio will stop on that channel for
a default period of time after activity has
ceased. This is referred to as “hangtime”.
During this hangtime you may respond by
pressing the PTT button.
Note: The LED scan indicator stops blinking
while the radio is in hangtime. If the
PTT button is not pressed during the
preprogrammed hangtime, the radio
returns to scanning channels.
STARTING SYSTEM SCAN
Press the preprogrammed Scan button (see
page 14).
STOPPING SYSTEM SCAN
Press the preprogrammed Scan button.
STARTING AUTO SCAN
Auto Scan automatically starts scanning once
a channel with Auto Scan enabled is selected.
Select the channel that your dealer has
preprogrammed for Auto Scan.
STOPPING AUTO SCAN
Select a channel that has not been
preprogrammed for Auto Scan.
05_Scan.fm Page 31 Monday, November 17, 2003 1:57 PM
Page 34
32
SCAN
DELETING A NUISANCE CHANNEL
Note: Your dealer must preprogram a button
to Nuisance Delete (see page 14) to
access this feature.
If a channel continually generates unwanted
calls or noise (a “nuisance” channel), you can
temporarily remove it from the scan list:
Restoring a Channel to the Scan List
1 While the radio is on the Nuisance Channel,
press the preprogrammed Nuisance
Channel Delete button until you hear a tone.
2 Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
Note: You cannot temporarily delete the
channel that has been preprogrammed as your designated scan
channel, a priority channel, or the
last remaining channel in the scan
list.
1 Power off the radio. Once the radio is powered
on again, the deleted nuisance channels are
restored to the scan list.
– or –
1 Press the preprogrammed Scan button to stop
the scan.
2 Press the preprogrammed Scan button again
to start scanning again. The Deleted Nuisance
Channels are restored to the scan list.
–
or –
1 Select a different channel. Once you return to
the original channel, the deleted nuisance
channels are restored to the scan list.
05_Scan.fm Page 32 Monday, November 17, 2003 1:57 PM
Page 35
33
SCAN
PRIORITIZING A SCAN LIST
MEMBER
You may want your radio to scan a specific
channel more frequently for calls. Your dealer
can prioritize scan list members for you. Check
with your dealer for details.
Even though your radio has switched to a nonpriority channel, it will still check for activity on
the priority channel. If ac tivity is dete cte d , the
radio will switch to the priority channel.
Priority Channel Scanning Sequence
None specified Ch1➠Ch2➠Ch3➠
Ch4➠...Ch1
Channel 2 Ch2➠Ch1➠Ch2➠Ch3➠
Ch2➠Ch4➠Ch2➠...Ch1
05_Scan.fm Page 33 Monday, November 17, 2003 1:57 PM
Page 36
34
SCAN
Notes:
05_Scan.fm Page 34 Monday, November 17, 2003 1:57 PM
Page 37
35
ACCESSORIES
ACCESSORIES
Motorola offers a number of accessories to
enhance the productivity of your two-way radio.
Many of the available accessories are listed
below .
CARRY ACCESSORIES
CHARGERS
BATTERIES
HLN9701 Nylon Case with Belt Loop
RLN5383 Leather Case with Belt Loop
RLN5384 Leather Case with 2-1/2 inch Swivel
RLN5385 Leather Case with 3 inch Swivel
HLN8255 3 inch Spring Action Belt Clip
RLN5644 2 inch Spring Action Belt Clip
HLN6602 Universal Chest Pack
1505596Z02 Replacement Strap for HLN6602
Universal Chest Pack
RLN4815 Universal RadioPak
4280384F89 Replacement Belt Lengthener for
RLN4815 Universal RadioPak
NTN5243 Shoulder Strap for Hard Leather
Cases (attaches to D-Shaped Rings
on case)
HLN9985 Waterproof Bag
WPLN4138_R Rapid Desktop Charger w/US NA
120 V Plug
EPNN7997 10 Hr. US NA 120 V Plug (plugs
directly into radio accessory
connector, used ONLY with battery
NNTN4496)
WPLN4155_R 10 Hr. Desktop Charger w/US NA
120 V Plug (used ONLY with battery
NNTN4496)
EPNN7994 Rapid US NA 120 V Plug
WPLN4161_R Rapid Six (6) Pocket Multi-Unit
Charger w/US NA 120 V Plug
NNTN4496_R NiCd, 1100 mAH
NNTN4497_R Li-lon, 1800 mAH
NNTN4851 NiMH, 1400 mAH
NNTN4970 Slim Li-Ion, 1600 mAH
06_Accessory.fm Page 35 Monday, December 1, 2003 3:21 PM
Page 38
36
ACCESSORIES
HEADSETS
SURVEILLANCE ACCESSORIES
RLN5411 Ultra-Lite Breeze Behind the Head
Headset
PMMN4001 Ultra-Lite Earset with Mic and PTT
HMN9013 Lightweight Headset w/o In-line PTT
RMN4016 Lightweight Headset with In-line PTT
RLN5238 Lightweight Headset with In-line PTT,
NFL Style
HMN9021 Medium Weight Over the Head Dual
Muff Headset
HMN9022 Medium Weight Behind the Head
Dual Muff Headset
BDN6647 Medium Weight Single Speaker
Headset
BDN6648 Heavy Duty Dual Muff Headset with
Noise Canceling Microphone
RMN5015 Heavy Duty Dual Muff Racing
Headset (requires RKN4090
Headset Adapter Cable)
RMN4051 2-Way Hard Hat Mount, Black, Noise
Reduction Rating (22 dB) (requires
RKN4094)
RMN4054 Receive-Only Hard Hat Mount
Headset w/3.5mm Right Angle Plug
RMN4055 Receive-Only Headband Style
Headset w/3.5mm Right Angle Plug
RKN4090 Adapter Cable (for use with headset
RMN5015)
RKN4094 In-Line PTT Adapter (for use with
headset RMN4051)
REX4648 Replacement Foam Ear Pad and
Windscreen Kit (for use with
headsets RMN9013 & RMN4016)
7580376E34 Replacement Ear Seals (for use with
headsets HMN9021 & HMN9022)
5080371E66 Replacement Ear Pad (for use with
headset BDN6647)
3580371E59 Replacement Wind Screen (for use
with headset BDN6647)
HMN9752 Earpiece with Volume Control,
1-Wire (plastic earloop) (Beige)
HMN9727 Earpiece without Volume Control,
1-Wire (plastic earloop) (Beige)
RLN4894 Earpiece without Volume Control,
1-Wire (plastic earloop) (Black)
HMN9754 Earpiece with Microphone & PTT
Combined, 2-Wire (Beige)
RLN4895 Earpiece with Microphone & PTT
Combined, 2-Wire (Black)
06_Accessory.fm Page 36 Monday, December 1, 2003 3:21 PM
Page 39
37
ACCESSORIES
REMOTE SPEAKER MICROPHONES
EAR MICROPHONE SYSTEMS
RLN5198 Earpiece with Microphone & PTT
Combined, 2-Wire w/Low Noise Kit
NTN8371 (Beige)
BDN6720 Flexible Ear Receiver without V olume
Control (RX only)
HMN9036 Earbud with Microphone & PTT
Combined, 2-Wire (Black)
HLN9132 Earbud Single Wire Receive Only
(Black)
NTN8370 Extreme Noise Kit
NTN8371 Low Noise Kit
RLN4760 Small Custom Clear Earpiece,
Right Ear (for use with low noise kit
NTN8371)
RLN4763 Small Custom Clear Earpiece,
Left Ear (for use with low noise kit
NTN8371)
RLN4761 Medium Custom Clear Earpiece,
Right Ear (for use with low noise kit
NTN8371)
RLN4764 Medium Custom Clear Earpiece,
Left Ear (for use with low noise kit
NTN8371)
RLN4762 Large Custom Clear Earpiece,
Right Ear (for use with low noise kit
NTN8371)
RLN4765 Large Custom Clear Earpiece,
Left Ear (for use with low noise kit
NTN8371)
5080384F72 Replacement Noise Attenuating Plug
for NTN8370
5080371E73 Replacement Ear Tip (for use with
low noise kit NTN8371) (Beige)
5080371E75 Replacement Ear Tip (for use with
low noise kit NTN8371) (Black)
7580372E11 Replacement Ear Cushion (for use
with earpiece BDN6720)
HMN9030 Remote Speaker Microphone with
Coil Cord and Clip Back
HKN9094 Replacement Cord (for use with
remote speaker microphone
HMN9030)
BDN6646 Standard Ear Mic with PTT Only
Interface
BDN6706 Standard Ear Mic with PTT and VOX
Interface
06_Accessory.fm Page 37 Monday, December 1, 2003 3:21 PM
Page 40
38
ACCESSORIES
ANTENNAS
MISCELLANEOUS
0180358B38 Ring Push-to-Talk Switch (for use
with ear microphone systems
BDN6646 & BDN6706)
0180300E83 Body Switch Push-to-Talk (for use
with ear microphone systems
BDN6646 & BDN6706)
0180300E25 Ear Guard with Adjustable Loop
0180358B32 Ear Holder, Black, Small
0180358B33 Ear Holder, Black, Medium
0180358B34 Ear Holder, Black, Large
0180358B35 Ear Holder, Clear, Small
0180358B36 Ear Holder, Clear, Medium
0180358B37 Ear Holder, Clear, Large
NAD6502_R VHF Heliflex Antenna 14cm,
146-174 MHz
HAD9742 VHF Stubby Antenna, 9cm,
146-162 MHz
HAD9743 VHF Stubby Antenna, 9cm,
162-174 MHz
NAE6522_R UHF Heliflex Stubby Antenna 9cm,
438-470 MHz
8505816K26 UHF Heliflex Stubby Antenna 7.1cm,
470-520 MHz
NAE6483_R Flexible Whip Antenna, 403-520 MHz
RLN5500 Accessory Retainer Kit (for use with
any audio accessory that needs to be
secured to the radio due to
demanding customer environments)
TDN9327 Portable Radio Hanger for door
panels up to 2.75 inch (slides over
and hangs from the door panel in
vehicle, radio belt clip required)
TDN9373 Portable Radio Hanger for door
panels up to 2.75 to 3.25 inch (slides
over and hangs from the door panel
in vehicle, radio belt clip required)
06_Accessory.fm Page 38 Monday, December 1, 2003 3:21 PM
Page 41
CP150™/CP200™ Quick Reference Card
NOTE: Enter the functions for your radio’s two
programmable buttons in the box es provided above .
SP represents Short Press, while LP represents
Long Press.
LED Indicators
LED State/Color Indication
Red
Flashing Red
Transmitting
Receiving
Scan
Flashing Green
Scanning for activity
Low Battery
Flashing Red while
transmitting
Low battery level
Call Alert
†
Flashing Yellow
Indicates receiving a Call Alert
Selective Call
†
Flashing Yellow
Indicates receiving a Selective
Call
Sticky Monitor/
Monitor
Yellow
While monitoring.
Battery Charge
Status
Green
Yellow
Flashing Red
None
Good
Sufficient
Low
Very Low
†Available for 4W and 5W models only.
Microphone
PTT
2
SP:
LP:
1
SP:
LP:
LED
Indicator
Channel Selector Knob
On/Off/Volume Knob
QR-Card.fm Page 39 Monday, November 17, 2003 1:58 PM
Page 42
Turning On the Radio
• Turn On/Off/Volume Control knob clockwise. If the
radio successfully powers up, you will hear the Self
Test Pass tone and see the LED light green. If the
radio fails to power up, you will hear the Self Test
Fail tone.
Turning Off the Radio
• Turn On/Off/Volume Control knob counterclockwise until you hear a click.
Adjusting the Radio Volume
1. Press and hold Volume Set button (preprogrammed
by your dealer) until you hear a continuous tone.
2. Turn On/Off/Volume Control knob to adjust volume
level.
3. Release Volume Set button at desired volume level.
Selecting a Radio Channel
• Turn Channel Selector knob clockwise or counterclockwise to reach desired channel.
Receiving
1. Turn on the radio.
2. Adjust the volume level.
3. Select the radio channel.
Transmitting
1. With radio on, turn Channel Selector knob to
required channel.
2. Press PTT and speak clearly with mouth about 2.5
to 5 cm (1 to 2 inches) away from microphone.
3. Release PTT when call is completed.
Audio Indicators for Programmable Buttons
Starting or Stopping Scan
1. Press the preprogrammed Scan button to start scan.
The LED indictor blinks green during scan operation.
Or, select a channel that has been preprogrammed
for Auto Scan to start scan.
2. Press the Scan button again to stop scan. Or, select
a channel that has not been preprogrammed for
Auto Scan to stop scan.
Deleting a Nuisance Channel
1. With radio on a Nuisance Channel, press and hold
the preprogrammed Nuisance Delete button until
you hear a tone.
2. Release the Nuisance Delete button.
Programmable
Buttons
Positive
Indicator
Tone
Negative
Indicator
Tone
Scan
Start Scan
operation
Stop Scan
operation
Power Level
†
Radio transmits
at high power
Radio transmits
at low power
Squelch
Radio operates
in tight squelch
Radio operates
in normal
squelch
Repeater/
Talkaround
Radio DOES
NOT use the
repeater
Radio uses the
repeater
VOX VOX enabled VOX disabled
†Availab le for 4W and 5W models only.
QR-Card.fm Page 40 Monday, November 17, 2003 1:58 PM
Page 43
Page 44
Loading...