Mitutoyo 02AZD730C Users Manual

02AZD730C User Manual

Product U-WAVE-T IP67 type
Model 02AZD730C
FCC ID VXU-02AZD730C
IC 4396B-02AZD730C

U-WAVE-T

Introduction

The U-WAVE-T is a wireless com munication tool for transmit ting measurement data to t he Mitutoyo
U-WAVE-R (option) by connect ing to a Digimatic-output interf aced tool with the supplied connectin g
cable.

The U-WAVE-T is also categorized into two types: IP67 type and buzzer type. To obtain the
highest performance and t he longest service life from the U-W AVE-T, carefull y read this User’s Manual
thoroughly prior to use.
specifications of the U-WAVE-T and descriptions in this manual are subject to change without prior
notification.

Safety Precautions

Use the U-WAVE-T in conformanc e with the specifications, functio ns and precautions for use given in thi s
manual. If the U-WAVE-T is use d in other way, it may jeopardize saf ety.

• Do not use the U-WAVE-T near a medical devic e that has a possibility of causing a

malfunction due to radio waves.

• The U-WAVE-T using an electric wave has a possibility that communication is interrupted

！

WARNING

Notes on Export Regulations

WARNING

Precautions for the Wireless Law
The country (region) that can use The U-WAVE-T (IP67 type and buzzer type) by the code No. and

Use excluding the country (region) specified by the certification number is prohibited by the law.

WARNING

Precaution for 02AZD730C, 02AZD880C ( U.S.A and Canada type)

Notes

Precautions on Wireless Communication En viron ments

under the influence of exter nal noises, etc., even within the distance of communication of the
electric wave. In this case take s ufficient failure preventio n action (security measures).

• In the ev ent the U-WAVE-T sh ould fail, take suffici ent failure prevention act ion (security
measures).

• Do not disa ssemble, short, modi fy, or heat the supplie d battery. The leaked contents may get
into your eyes. Also, heat generat ion or explosion may result.

• The battery used in the U-WAVE-T contains an irritating substance.
Should this liquid substanc e be applied to your eyes or skin by accide nt, immediately rinse it
away in clean water.

• Should the batte ry be swallowed by accident, im mediately rinse the mout h out and induce
vomiting the battery while drin king a large amount of water. Af ter then consult a doctor.

The U-WAVE-T falls int o the Catch-All-Contr olled Goods or Program under the Category 16 of

！

the Separate Table 1 of the E xport Trade Control Order or t he Category 16 of the Separat e
Table of the Foreign Excha nge Control Order, based on th e Foreign Exchange and Forei gn
Trade Law of Japan.
Further, this User's Manual als o falls into the Catch-All-Contr olled Technology for use of th e
Catch-All-Controll ed Goods or Program, under the Cat egory 16 of the Separate Table of the
Foreign Exchange Control Order.
If you intend re-exporting or re-providing the product or technology to any party other than
yourself, please consult with Mitutoyo prior to such re-exporting or re-providing.

certification number i s different. Please confi rm U-WAVE-T must be in th e country (region) that uses it in
the table below before it uses it.

Country Japan , EU U.S.A , Canada
Model IP67 type Buzzer type IP67 type Buzzer type
Code No. 02AZD730A 02AZD880A 02AZD730C 02AZD880C

Certification
number

・ The U-WAVE-T must follow th e corresponding regul ation which is specified in the country

！

・ The U-WAVE-T for Japan and Europe (02A ZD730A, 02AZD880A) ca nnot be used

・ The U-WAVE-T for U.S.A and Canada (02AZD730C, 02AZD880C) cannot be used

• Do not disassemble or modify an y part of the U-WAVE-T.

• Do not peel off the certificati on label stuck on the U-WAVE-T.

• Remove the battery before taking an airpla ne and do not use the U-WAVE-T
in the airplane. The use of a wir eless equipment in th e airplane is prohibit ed.

This device complies with Par t 15 of the FC C R ule s and RSS- Gen of IC Rul es.
Operation is subje ct to the following tw o co nditions:
(1) This device may not ca use h arm ful inter fer en ce, and
(2) This device must acce pt an y int erf ere nc e rec eived , incl ud i ng int erf ere nc e that m ay cau s e

undesired operation.
This Class B digital apparatu s com p lie s wit h Can adi an ICE S-0 03.
Cet appareil numérique de l a clas s B es t co nfor me à l a norm e NM B-00 3 du Canad a.

Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s auth ority to operate the equipmen t.

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against har mf ul int erfer en c e in a re side nti al in sta l latio n. This equ ipmen t gen er a tes,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may ca us e harm fu l inter f ere nce t o radio co mmu ni cati ons, However, there is no
guarantee that interfer enc e will not oc cur in a p art icul ar i nst all atio n. If this equ ipm ent d oe s
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on , th e us er is en co ur aged to tr y to corre ct the i nter fe ren ce b y on e or
more of the following measures:

-- Incr eas e the separ at ion bet w een th e equi pm ent an d re cei v er.

Notice that performance of the U-WAVE-T may not be fully delivered depending on the environment
such as a midway obstruction.
For the items of obstruct ion factors refer to t he following table.

Concrete wall

Metallic partition, etc.

Wireless LAN, Bluetoot h
ZigBee, microwave ov en,
and other communicati on
devices

Medical device

After reading this manual, keep it near the U-WAVE-T for quick reference. The

005NYCA0474

（Japan）

to use an electric wave.

in countries other than Japan and Europe.

in countries other than U.S.A and Canada.

The use of any U-WAVE-T without the label is prohibited.

Item Description

005NYCA0476

（Japan）

Disables communication if the U-WAVE-T is complet ely enclosed
with a concrete wall.
Have the possibility of reducin g the communication speed or
blocking communication.
Have the possibility of reducin g the communication speed or
blocking communication. Separate the communication channel
(band ID) and installation sit e of each device as far as possible
from those of the U-WAVE-T.
Do not use the U-WAVE-T near a medical device such as a laser
surgical knife and a bathroom scale.

VXU-02AZD730C

4396B-02AZD730C

VXU-02AZD880C

4396B-02AZD880C

User’s Manual

Precautions for Dust and Water Resistance

To obtain the highest perform ance from the IP67 type U-WAV E-T, be sure to observe the followi ng
precautions.

IMPORTANT

• The dust and water resistance of the U-WAVE-T is assured under the condition where the connecting
cable is connected and the battery cover is mounted.
If the U-WAVE-T is not used for an extended period, store it with each cover mounted to prevent from
water and oil.

• To deliver the maxim um performance of protecti on against water and dust (IP67) , mount the battery
cover tightly with screws after setting the battery. Also, do not remove the packing from the cover.

• If the c onnecting cable sheath is broken, a liquid will i nfiltrate into the U -WAVE-T and a Meas uring
tool due to capillary phenomenon, resulting in trouble. Immediately replace the cable.

• Use the U-WAVE -T with sufficient care so that the pa cking on each part may not be dam aged with
cutting chips, dirt, etc. Shoul d any packing be damaged, the d ust and water resistance will be
impaired. Immediately repla ce the packing or have the U-WAVE -T repaired by a service center .

• Rubber a nd other materials us ed for rubber caps and s ealing portions are n ot fully effective for
diversified coolants, chemi cals, etc. If these materials bec ome deteriorated markedl y, consult the
nearest Mitutoyo sales office.

• The U-WAVE-T i s provided with such a structure that cannot be disassembled by appl ying seals to
individual parts.
If any sealed part is disassembled, then a predetermined performance will not be delivered.

• Do not use the U-W AVE-T at sites which might be submer ged. The U-WAVE-T cannot prev ent liquids
such as a coolant from infiltrating.

TIP

IP67 protection level (For details refer to IEC 60529.)

• Protection ag ainst foreign matters (Level 6): Pr otects an object against the ingr ess of dust and dirt,
and against a full contact with it.

• Protection against water (Level 7): No causing harmful effects when submerged in water for 30
minutes with its bottom end at a depth of 1 m below the surface o f water.

Other Precautions

The following deeds and situatio ns will cause a failure or malfunction in the U-WAVE-T.
Care should be exercise d.

IMPORTANT

• Do not give a sudden shock such as a drop or apply an excessive force to the U-WAVE-T.

• If the U-WAVE-T is not used more than 3 months, rem ove the battery from the U-W AVE-T and store it
in a safe place. Otherwise, leak s from the battery may damage t he U-WAVE-T.

• Avoid using or stor ing the U-WAVE-T at sites which are ex posed to direct sunlight, excessi vely high
or low temperature.

• Avoid using or stor ing the U-WAVE-T at sites where it ma y be subject to the adhesion of soluti on
such as acid and alkali or organic solvent.

• If a high-voltag e device such as an electro-spark engraving pen is used for the U-W AVE-T, the
internal electronic part s may be damaged.

• Exercise care so as not to apply an undue force or curvature to the connecting cable.

• If the battery vol tage has come down, replace th e battery ahead of time befor e the operation
becomes unstable.

Warranty

In the event that the U-WAVE-T should pro ve defective in workma nship or material, withi n one year
from the date of original purchase for use, it will be repaired or replaced, at our option, free of charge
upon its prepaid ret urn to us.
This warranty is effective only where the U-WAVE-T is properly installed and operated in conformance
with the instructions in this manual.

Disposal of Old Electrical & Electro nic Equipment (Applicable in the European Union
and other European countries with separate collection systems)

This symbol on the U-WAVE-T or on its packaging indicates that the U-W AVE-T shall not be treated
as household waste. To reduc e the environmental impact of WEEE (Waste Electrical and E lectronic
Equipment) and minimi ze the volume of W EEE entering landfills, ple ase reuse and recycle.
For further information, pl ease contact your local dealer or distributors.

[1] Name of Each Part and External Dimensions (Unit : mm)

1. LED display (green, red, orange) 2. Battery cover 3. Connector cover

4. Device ID label 5. Buzzer holes (for th e buzzer type only) 6. Certificati on label

2. Battery cover

5. Certification label

(This label is different according to the country(region).)

[2] Replacing the Battery

1) Setting the battery

No battery has been set before shipping. After unpacking the U-WAVE-T, set the battery with the
following procedure. W hen screwing or unscrewing the screw s, always use the size 0 screwdriver (No.

05CZA619) of the st andard accessory and tig hten or loosen them wit h a torque of 5 to 8 N •cm.
(1) Remove the two mounting screws (M2.5X0.45X3/No. A115-2515C) with the size 0 screwdriver.
(2) Dismount the batt ery cover.
(3) Orientate the battery pl us side toward the cover, slide i ts one end into the “+” terminal on th e

U-WAVE-T, and then insert the other end into the battery ret aining claw.
(4) Check that the packing (No. 02AZD734) has been attached correctly to the specified position.
(5) Mount the battery cov er.
(6) Tighten the mounting scr ews with the size 0 screwdriver to fix th e cover.
(7) Make sure that no part of the packing is detached.

(1),(6) (3)

2) Removing the battery

To remove the battery, use a small flat-blade screwdriver, etc. Inse rt the screwdriver between the
battery retaining claw and th e battery, and then remove the bat tery by using the screwdrive r as
leverage.

4. Device ID label

3. Connector cover

6. Buzzer holes

(for the Buzzer type)

No.99MAL108B2

1. LED display