Mitsubishi Electronics 3DC-100S User Manual
3D Starter Pack
MODEL
3DC-100S
OWNER’S GUIDE
For questions:
- Visit our website at www.mitsubishi-tv.com.
- E-mail us at TVSupport@mevsa.com.
- Call Consumer Relations at 800-332-2119 for operational or
connection assistance.
To order replacement or additional remote controls or other
accessories, visit our website at www.mitsuparts.com or call
800-553-7278.
2
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
8) Only use attachments/accessories specified by the manufacturer.
9)
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
FCC Information
Product: 3D Adapter
Model: 3DC-10 0S
Responsible
Party:
NOTE: This equipment has been
tested and found to comply with
the limits for a Class B digital
device, pursuant to Part 15 of
the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses
and can radiate radio frequency
energy and, if not installed and
used in accordance with the
instructions, may cause harmful
interference to radio communi-
Mitsubishi Electric
Visual Solutions
America, Inc.
9351 Jeronimo Rd.
Irvine, CA
92618 -19 0 4
cations. However, there is no
guarantee that interference will not
occur in a particular installation.
If this equipment does cause
harmful interference to radio or
television reception, which can
be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the
receiving antenna.
• Increase the separation
between the equipment and
re ceive r.
• Connect the equipment into
an outlet on a circuit different
from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
WARNING. To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
Please check www.mitsubishi-tv.com for updates on 3D signals and safety.
3
Features
• Converts 3D video originating in several popular formats to checkerboard format for display on your 3D or 3D-ready Mitsubishi television
or 3D-ready Samsung DLP television.
• Processes side-by-side, top-and-bottom, and frame-packing 3D
(e.g., Blu-ray 3D) formats.
• Passes 2D images unaltered for normal display.
• Includes two pairs of active-shutter 3D glasses and matching IR
emit te r.
• Compatible with these Mitsubishi television models:
3D-Ready
Televisions
(2007 through
2010)
3D Televisions
(starting in 2010)
833 series (2007) L65-A90 (2008) L75-A91 (2010)
C8 series (2008) 737 series (2009) 638 series (2010)
735 series (2008) 837 series (2009) C10 series (2010)
736 series (2008) C9 series (2009)
835 series (2008) L75-A81 (2010)
738 series (2010) 838 series (2010)
Use and Compatibility
The Mitsubishi 3D Adapter, Model 3DC-100S may be used to display
3D content only when connected to a Mitsubishi 3D-Ready DLP TV,
Samsung 3D –Ready DLP TV or a Mitsubishi 3D TV. When using the
Mitsubishi 3D adapter, a 3D source device connected to the Mitsubishi 3D adapter is required to support the display of 3D games, 3D
broadcasts from terrestrial/cable/satellite and 3D Blu-ray disc content.
Mitsubishi 738 and 838 Series TVs with software version of 012.06 or
higher do not require the use of the adapter for HDMI 1.4a mandatory
3D signals.
For assistance call 1(800) 332-2119
4
Samsung 3D Ready DLP TVs
Compatibility with 3DC-100S Adapter
Mitsubishi has tested the 3DC-100S with representative models from
several series of Samsung 3D-Ready DLP HDTVs. Mitsubishi has not
tested all Samsung 3D-Ready DLP HDTV models or series and cannot
guarantee compatibility with non-tested models or series. Samsung
3D-Ready Plasma TVs are not compatible with the 3DC-100S.
650 Series
Tested Model: HL61A650C1F
Other Models:
Tested Model: HL61A750A1F
Other Model:
Tested Model: H L-T5 0 75 S
Other Models:
Tested Model: H L-T6176S
Other Models:
HL50A650C1F
HL56A650C1F
HL72 A650C1F
750 Series
HL67A750A1F
75 Series
HL-T4675S
HL-T5 6 75 S
76 Series
HL-T5 0 76 S
HL-T5 6 76 S
87 Series
Tested Model: H L-T5 6 87S
Other Models:
88 Series (not tested)
HL-T 7288S
89 Series (not tested)
HL-T5 0 89 S
HL-T5 6 89 S
HL-T6189S
HL-T5 0 87S
HL-T6187 S
The Samsung models listed here are models that have been tested
at the time of printing. Normally all models from the same series will
operate the same way and have the same compatibility.
Mitsubishi continues to test additional models when they are available. For updates to the list of tested models, please check the
Owner’s Guide for the 3DC-100S on line at www.mitsubishi-tv.com.
Please check www.mitsubishi-tv.com for updates on 3D signals and safety.
5
3D Adapter
Battery Installation
The remote control requires one CR2025 lithium battery.
1
To remove the battery,
press on the
retaining clip.
2
Emitter
1. Remove the cover.
2. Insert the battery, positive side up. Be sure the
retaining clip holds the battery securely.
3. Reinstall the cover.
Lithium Battery Safety
This product uses CR2025 Li/MnO2 lithium coin batteries.
WARNING: Lithium coin cell batteries pose a serious risk of injury if ingested.
Keep cells out of reach of children. If ingested immediately contact a physician or the National Poison Center at 202-625-3333.
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type (CR2025).
CAUTION: Risk of fire and burns. Do not recharge, disassemble, heat above
100˚ C (212˚ F), or incinerate. Keep battery out of reach of children.
Disposal. Dispose of used batteries promptly according to local recycling or
waste regulations.
Controls and Indicators
POWER
3D STATUS
IR Sensor
POWER
Light Lit when power is on.
3D STATUS
POWER
3D MODE
Light Lit during 3D signal processing.
Button
Allows manual override of auto on/off. Press to power
off the Adapter if it powers on when not needed,
Button Allows manual selection of 3D format conversion.
For assistance call 1(800) 332-2119
POWER
3D MODE
Adapter
POWER
3D MODE
Remote Control
Loading...