Mitel 5606 User Manual

MITEL

QUICK REFERENCE GUIDE

5606 Wireless Handset

1 Loudspeaker 2 Display 3 Mute Button 4 Soft Keys 5 OFF Button 6 Alphanumeric Keys 7 Microphone 8 Navigation Key 9 ON Button

10 Menu Soft key 11 Volume Up/Down Button 12 LED 13 Alarm Button (optional)

Display Icons

Off hook (call in progress)

Audio signals off

Battery

Loudspeaker on/off

Headset connected

New message

Text input mode (capitals)

Text input mode (lower case)

Locked keypad

Unanswered call

Digit input mode

Phonebook

Incoming/Outgoing call

Unread/Read message

No movement/Man-down

alarm

Turning the Handset On/Off

To turn on:

1. Press and hold the ON button. “Switch on?” is displayed.

2. Press Yes within 10 seconds.

To turn off:

1. Press and hold the OFF button.

2. Select Yes and press OK.

Making a Call

• Dial the number and then press the ON button. The name of the called party is displayed if available.

• Press the Navigation Key down arrow to open the call list and use the Navigation key to scroll the list of your last twenty calls. Press the ON button to dial.

1. In the Contacts menu, select Central

Phonebook and the press the Right navigation key.

2. Select the name to call from the list and

then press the ON button.

• Press a pre-programmed hot key. For information about programming Hot keys, see the Mitel 5606 Wireless Handset User Guide.

Answering a Call

•Press the ON button or the Accept softkey to answer a call in normal mode.

• Press the Volume Up button or the middle softkey to answer in speaker mode.

Ending a Call

• Press the OFF button to end a call.

Placing a call on Hold

• Press the R softkey to place a call on Hold. After 30 seconds, “Hung Up” is displayed and a busy tone sounds.

• Press the R softkey again to retrieve the call.

Transferring a Call

1. Press the R softkey to put the call on hold.

2. Dial the number to which you want to

transfer the call.

3. Press the On button to transfer the call.

Note: Supervised transfer feature is systemdependent.

Adjusting Volume Levels

To adjust earpiece volume

• Press Volume Up/Down button to increase/decrease volume during a call.

To change ringer volume:

• In the Settings menu, highlight Alert Signals.

•Select Ring Signals and press >.

• Select a call type and a volume level.

• Press Select to activate your choice.

To turn Loudspeaker on/off:

• Press the middle softkey before or during a call.

To turn Mute on/off during a call:

• Press the Mute button. “Muted” is displayed.

To turn ring signal on/off in standby mode:

• Long press the Mute button to toggle ring signal on/off. The “Audio Signals Off” icon appears.

M Mitel (design) is a registered trademark of Mitel Networks Corporation. © 2008, Mitel Networks Corporation. All other products and services are the trademarks of their respective holders. All rights reserved.

QUICK REFERENCE GUIDE

1. Message

2. Contacts

3. Modes

4. Services

5. Settings

Locking the keypad:

• Press the * key and then within four seconds, press the left sofkey to lock/unlock keypad. The locked keypad icon indicates a locked keypad.

Charging the battery:

Place the handset in the desktop charger. The Battery icon indicates charge level. The handset is fully functional while in the charger.

Navigating the Menu

To perform this task... Press this key

Enter the menu Menu softkey Choose a menu tab Left/Right navigation keys Open a menu tab Right navigation key Move through a list Up/Down navigation key Expand a selection Right navigation key Select an item Press the ON button Exit a menu Press the OFF button

Menu Structure

On hook/Standby Menu

Note: Menu items are dependent upon system programming.