DSP7000
Digital Signal Processing
Loudspeaker System
Four-way DSP active loudspeaker
Curved cabinet featuring advanced
laminated damping technology
Piano lacquer finish in a range of
sumptuous colours
Self-contained audio system, each
speaker has four custom drivers,
four amplifiers, three digital
converters, digital crossovers and
advanced sound-shaping DSP
Technology
Controlled by Meridian System
Remote (supplied)
Listener control over features
including volume, bass, treble tilt,
listening axis, time-compensated
balance and absolute phase
The ultimate expression of the art
and science of compact loudspeaker
design
Meridian Audio Limited
Stonehill
Stukeley Meadows
Huntingdon
Cambridgeshire PE29 6EX
England
T 44 (0) 1480 445678
F 44 (0) 1480 445686
Meridian America Inc
3800 Camp Creek Parkway
Building 2400 Suite 122
Atlanta GA 30331
T (404) 344 7111
F (404) 346 7111
www.meridian-audio.com
Meridian DSP7000
Meridian’s latest speakers, the DSP7000s, are breathtaking in their ability to place
musicians in precise locations in your room, with even subtle body movements clearly
audible. The system also has the power to bring alive the most challenging motion
picture sound track or rock band. The DSP7000 is a smaller derivative of our
Stereophile Class A rated flagship, the DSP8000. Aspects like the unique cabinet construction allow the DSP7000 to handle the demanding dynamic resolution required
by today's formats.
DSP loudspeaker drivers
Each DSP7000 loudspeaker uses two multiple high-efficiency long-throw custom bass
drive units. The treble and mid-range drivers are mounted in a separate acoustic
enclosure. The treble unit is a semi-horn-loaded composite dome design with a silver
voice coil. The mid-range unit uses a custom 160mm polypropylene driver.
Power amplifiers
The speakers are driven by four independent high-power low-feedback power amplifiers. The combination of optimised magnetic design, careful star earthing, and very
fast output devices gives the amplifiers extremely low noise, high detail, and fast
bass. The whole electronic assembly is powered by a substantial toroidal transformer
feeding high-quality audiophile-grade capacitors.
Cabinet
Each DSP7000 loudspeaker is built within a precision manufactured cabinet, which
uses innovative design techniques to give exceptionally low coloration and exquisite
mid-range transparency.
The ported enclosure is fabricated from curved pressure-laminated panels, each using
multiple layers of selected woods and metal to provide high stiffness and damping.
Its narrow, tapered shape offers optimum dispersion across a wide listening area.
The cabinet is constructed with extensive bracing. The front incorporates a window
for the matrix display and an infrared remote control sensor. The cabinet stands on
triangulated adjustable machined foot assemblies with provision for floor spikes or
skids.
Meridian DSP Loudspeakers, what’s inside?
All these separate components are integrated in Meridian DSP loudspeakers
Technical Specification
Performance: Frequency response in-room within 3dB from 30Hz to over 20kHz.
Maximum output >112dB spl @ 1m on music material.
Noise less than 15dB spl.
Overall distortion typically <0.02% at any frequency or level.
Inputs: Two digital inputs to SPDIF standard; 32kHz–96kHz sampling rates
at up to 24 bit; MHR support. (A future software update will
enable support for 192kHz.)
Construction: Four-way acoustic reflex system.
Digital crossovers at 200Hz and 2.6kHz.
2 x 200mm long-throw bass drivers.
1 x 160mm polypropylene mid driver.
1 x 25mm aluminium-dome tweeter, silver wire, short horn-loaded
with protective grille.
Black gloss piano-lacquer cabinet, other colours to special order.
FIFO memory buffer input for the lowest possible jitter from
almost any source.
Analogue gain and filtering using proprietary Meridian Class-A
discrete amplification.
Digital and conversion electronics constructed using advanced
surface-mount techniques and partitioned 6-layer printed-circuit
boards.
Four 24-bit 128 x oversampling D/A converters.
Four 100W power amplifiers per speaker.
Dimensions: 1050mm (41.3”) H, 348 (13.7”) W, 458 (18.0”) D.
Weight 70kg (154 lb) each.
Controls: Rear-panel controls for Power On/Off.
MSR and RS232 port provide control over bass, treble tilt, listening axis, volume, time-compensated balance and absolute phase.
Front display: Eight-character display with system lights, can be blank.
Meridian Audio reserve the right to amend and improve
specifications at any time.
Preamp
Crossover
DAC
DAC
3-way
passive
speaker
system
DAC
Power Amp
Power Amp
Power Amp
DSP7000
Digital Signal Processing
Loudspeaker System
The DSP7000 uses the same design
principles as the award-winning
Meridian DSP8000 and is perfect for
use in a Meridian Digital Theatre®
Loading...